Cannot eject any disk or disk image

I cannot eject any disk or disk image except with disk utility. Dragging to trash, sidebar or toolbar buttons, even the keyboard button will not work. Restarting holding mouse button and disk utility eject button do work. Any suggestions?

Try doing this:
Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
See if this restores your eject functions.

Similar Messages

I have upgraded my OS into Mountain Lion and now I cannot see any net storage disks. may someone help me? thanks

I have upgraded my OS into Mountain Lion and now I cannot see any net storage disks. may someone help me? thanks

Hi kiwirudy,
I've had the same problem more than once since I started trying to download my 14 April purchase of OS X Mountain Lion.
I found a property list called manifest.plist in my ~/Library/Application Support/AppStore folder which had a Boolean property called failed checked. I unchecked it and afterwards I was able to resume my download.
Here are some steps I've found useful:
Close the Mac App Store.
make a copy of the ~/Library/Application Support/AppStore folder. For some strange reason the Mac App Store likes to just delete it in some circumstances, which will mean that one has to start one's download again from the very beginning.
Double click on the manifest.plist in one's ~/Library/Application Support/AppStore folder.
This should open it in Property List Editor.
Expand all the nodes (holding down the alt key and clicking on the highest collapsed node should do it.
Find a key called failed of type Boolean and uncheck it.
Save the manifest.plist and close it.
Open the Mac App Store.
The red message "an error has occured" should now be gone and one should be able to resume one's download.
In the event that the ~/Library/Application Support/AppStore folder gets deleted:
start the download again (it will start from the beginning), pause it and close the Mac App Store.
copy your backup copy of the pkg file back to its sub-folder (it's a numbered folder in the ~/Library/Application Support/AppStore folder).
Open the Mac App Store and resume your download.
It should continue from where it left off.
This has worked for me so far. I'm holding my breath. Don't know if I'll still be alive when it's finished.
Regards
Nic
Message was edited by: n c h

Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk. MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

Try holding down the trackpad button while starting up the PowerBook. Holding down mouse button during start up ejects the disc in the optical drive, so I'm guessing it would work the same with the button the the trackpad.

Can see shared CD drives on MBA, but cannot read any data from disks

Puzzling one here.
Have a MBA and am trying to use the shared drives on either a Windows XP computer, or MacBookPro notebook. Both computers are on the same wireless network, and both computers have DVD/CD sharing enabled.
In the RemoteDisk shortcut on the MBA, I can see both computers and their shared drives, and I can even see the title of the disks that are in the drives, however, I cannot see any of the data on the disks. It tells me 0MB at the bottom of the window.
The MBA has all updates installed, and I even tried to manually install the RemoteDisk/Sharing update from Apple.
I found this post, and tried the commands in Terminal, but that did not help: http://jasonevangelho.com/2008/11/02/how-to-really-enable-remote-disc-dvd-drive- sharing-non-air-macbook/
Any idea's?

Oh yeah, I forgot to say that the wireless router is a Time Capsule.

I cannot eject disk from my MacBook Air

I cannot eject a disk from my MacBook Air.   I've tried many options.    Any suggestions?

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Erased machine, bad installer disk, cannot eject!

After experiencing numerous crashes on my fairly recently acquired macbook pro, I decided to erase and reinstall the system, which I had planned on doing anyway because I wanted to partition the disk. I used Disk utility to set up my partitions and started the install. After reaching less than 25% install an error appeared indicating there was something wrong with "Essentials" and the install would not continue. I retried a couple of times and got the same message. I have only used the disk to try and repair the original OS which didn't do any good. I'm guessing the disk is damaged but I cannot eject it! The machine has no OS! What do I do? Not a happy Mac camper right now.

ok. Ran the Hardware test and immediately got an error. Removed 1 ram chip, tried again, still error. Put the chip back in and removed the second one, bingo! No error! I repartitioned the drive and installed the OS no problems.
Now, what to do about the chip problem. I should think it falls under the hardware warranty. Anybody have any idea how that works? Can they check the chip, will they just take my word for it?
Thanks everyone for the help so far!

HT3964 Cannot eject disk from Superdrive?

I have an Apple Superdrive connected to my iMac. I loaded a music cd, and ejected successfully. Then i inserted a dvd with photographs, just to check what was on it. I now cannot eject this dvd. I cannot see the disk drive or file anywhere. have tried to eject using button on keyboard. Have followed steps which tell me to shut down computer, unplug and restart after 15 secs. Also done Restart. Feel like chucking the drive at the wall! Can anyone help, please?

Nome Malaga wrote:
Just realised that the restart will not work, as I cannot close iPhotos. When i try to close it, it says cannot close as photos are importing. Can only be referring to the photos on this dvd stuck in the drive. Doesn't appear to be any way tp abort the import into iPhoto from dvd, but import is not actually happening! What can i do?
Force Quit iPhotos. If you don't know how to force quit an app, click the Apple symbol in the upper left of the display and select Force Quit, select the application (iPhoto) and hit Enter.

Cannot eject disk from bootcamp set up

Just setting up the bootcamp with Windows XP disk, all the installment is done but when you get to the end and windows says 'restarting in 13 sec's, please eject disk we cannot eject and it then states in a black background - disk error, press any key to re-start - nothing working when we do this. Have tuned on and off with same response - disk error, Think if we can just eject the disk it will be ok, using a wireless keyboard (but did not install keyboard software) thanks

You cannot eject the disk from the Mac during the install process. You only have access to the eject key after the Windows install is complete and after you install the Bootcamp Windows drivers from your Mac OS X disk. That is why you need to use a full version instead of an upgrade version per Apple's Bootcamp documentation. If you have a full, supported version of Windows you should be able to complete the install and reboot. Then you can boot into Mac OS X (holding the alt key after the ding and the white screen appears on the computer), eject the Windows install disk and insert the Mac OS X disk, then boor Windows and install the Bootcamp tools.
It sounds like your wireless keyboard is the problem here. You probably need a wired USB keyboard to do the Windows install. A USB keyboard (or the build-in notebook keyboard) will work for the install process (typing in the codes and what not).

Display image in JPanel without saving any file to disk

Hi,
I am fetching images from database. I am saving this image, display in JPanel and delete it. But this is not actually I want.
I wish to fetch this image as stream , store in memory and display in JPanel without saving any fiel in disk.
I wonder if it is Possible or any used implementation that I can use in my project. Any idea or experienced knowledge is enough.
Thanks

In what format is the image coming to you from the database? If it's an InputStream subclass, just use javax.imageio.ImageIO:
InputStream in = getImageInputStream();
BufferedImage image = null;
try {
   image = ImageIO.read(in);
} finally {
   in.close();
// ... Display image in your JPanel as you have beenIf you receive the image as an array of bytes, use the same method as above, but with a ByteArrayInputStream:
byte[] imageData = getImageData();
ByteArrayInputStream in = new ByteArrayInputStream(imageData);
BufferedImage image = null;
try {
   image = ImageIO.read(in);
} finally {
   in.close();
// ... Display image in your JPanel as you have been

"The iPhone cannot be synced. The disk could not be read from or written to." Any clue what that is due to. Everything but photos seem to sync fine.

when syncing, I get an error message stating: "The iPhone cannot be synced. The disk could not be read from or written to." Any clue what that is due to. Everything but photos seem to sync fine.

I had the same problem when trying to sync my new ilPhone 4s and a fairly new iPad 2. I couldn't find anything in the forum about it. So, since my 4s was new, I called support and luckily I got a CSR with some knowledge. He at first thought it would be tough to fix but after thinking a minute he found the fix. The fix is:
Click on finder, Go, Home, Pictures, then click on iPod photo cache and drag it to trash. Now try syncing again. It worked on both of mine. No problems since.

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

HT1338 When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?

When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?

Cannot import any pic file type already on my "hard disk" to LR 4.4 library on macbook pro retina.

Cannot import any pic file type already on my "hard disk" to LR 4.4 library on macbook pro retina. I am able to it on my pc win7-64 with LR 4.3. Any solution? Import from sd card works ok.

Just found out I can open the pics in LR 4.4 and they go into the library. I just cannot import from LR4.4. They are greyed out.

My Mac is showing that I am out of disk space. It says I have 175 MB of videos. I cannot find any videos in Itunes, Imovie or IPicture. What gives?

My Mac is showing that I am out of disk space. It says I have 175 MB of videos. I cannot find any videos in Itunes, Imovie or IPicture. What gives?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

HP BD ROM Cannot read any disk

Hi,
HP BD ROM BC 5541H cannot read any disk cd / dvd.I tried these troubleshooting steps, but I still can't solve the problem. What should I do next? 1-Microsoft Fix it. 2- sfc /scannow, Scan result ( windows resource protection did not find any integrity violations. ) 3- Uninstall device from device manager and install again, device manager status ("This device is working properly").but rom have same behaviour , no any change.
Please help me.... how to diagnose/solve problem ?
Regards,
Minhas

You might check to see if you have the most current BIOS installed.
You might also try removing it from device manager.
Install the Intel Chipset Driver
Then reboot and let it reinstall it self.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot eject any disk or disk image

Similar Messages

Maybe you are looking for