Cannot enable AMT on T61
I'm currently running Windows XP Pro (x86) on a T61, 6459 and trying to enable Intels AMT without any success. I have enabled it in the system BIOS and gone through Intel's ME BIOS (CTRP + P) set it up without any success. Upon boot into Windows, Intel's software (downloaded from Lenovo) indicates that the AMT chip status is still disabled and for me to contact an authorized Systems Administrator.
I have called Lenovo tech support, spoke to a representative xxxxx who also consulted a supervisor name:xxxx and was informed that they dont support configuring the device if i had already gone through the above process. The u nit isn't running on an image nor have we added any additional hardware and it's still under warranty. I dont understand why this isn't supported by Lenovo.
I have tested enabling this on 3 other laptops with the same result. Has anyone been successfull in enabling this device?
Thanks.
moderator note: lenovo employes names deleted to protect their privacy.
i just press enter and a drop down menu allows me to select enable or disable.
Do you have any password protection on your bios? can you change any other settings in your bios?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Similar Messages
-
Hello,
I am trying to get the AMT functionality up and running on T61. I noticed the BIOS settings for Intel(R) AMT was disabled. I enabled. As a result i see there are 2 devices showing up in my device manager.
However, my question is what is the password for a user to enter into Intel ME BIOS exntension setup?
Please let me know.
Best regards,
Naren KUmarI'm not sure there is a definitive guide for AMT but if you want to get a general understanding of AMT you can google "Intel AMT Guide" and find a number of documents from Intel.
The thing with AMT is that there is no single way of setting it up. You can do Enterprise Mode or SMB mode. Depending on what version of AMT (as in what T-Series are you using) you have you might even be able to do Host Based Provisioning where you configure the client with a Windows executable. You can also manage AMT devices through systems management solutions like LANDesk Management Suite. The best way to configure an AMT device also depends on what AMT features you want to take advantage of.
So there are lots of variables and it is hard to provide a specific answer. -
CANNOT Enable TURBO MEMORY For T400
Hi there,
I am a user of Thinkpad T400. The machine came with 2G turbo memory, but I cannot enable it in the 'Intel Turbo Memory Console', any advice?
Thanks in advance.
Message Edited by hereiam436 on 08-24-2008 06:40 AM
Thinkpad T400 2768AA6The screenshot shows the option to enable the TurboMem is blanked off. Have you tried starting the application as administrator. You then might have the option available.
Could also check what is driver version of the application.
You can check that by clicking "Help" tab followed by "About" in the Turbo Memory Console. Intel has released new driver ver 1.7. Driver ver (1.7.0.1029). I upgraded it from the Intel site, a few days ago, and it seems to work better than the previous driver.
The drivers available with Lenovo are old.
Sushil
ThinkPad T61, (7658CTO), T7500, Integrated Graphics, 320 GB HDD, 3 GB RAM, 1 GB Intel Turbo Memory, Vista (32 bit) Business -
Sun Cluster 3.2 - WARNING: Cannot enable monitoring on resource-group
clrg online -emM ora-1line-rg(C348385) WARNING: Cannot enable monitoring on resource ora-1line-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-1line-rs' and re-enable monitoring using 'clresource monitor ora-1line-rs'.
(logical host reference)
(C348385) WARNING: Cannot enable monitoring on resource ora-hastp-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-hastp-rs' and re-enable monitoring using 'clresource monitor ora-hastp-rs'.
(hastorageplus reference)
I am able to unmonitor and monitor the resources manually. What is the cause of these WARNING messages? This from Oracle and we have yet to complete the installation of HA-Oracle. Oracle is not installed and tnsnames.ora and listener.ora is not configured. Is this the reason? If so, could someone explain why you cannot online the resource group until after the application has been installed.
Thanks in advance,
RyanAs the manual says for clrs create:
By default, resources are created in the enabled state with monitoring enabled. so when you issue the clrg online -emM it is just simply warning you that these other resources weren't disable. Note they wouldn't have been started because the RG would have been offline.
Does that explain it? If not, ask more questions.
Tim
--- -
Cannot enable acrobat 8.1.3 addin in Word 2007
Hi,
I cannot enable acrobat 8.1.3 addin in Word 2007. In Word 2007 I go to the top left circle, word options, Add-Ins, Disabled Application Add-ins, Acrobat PDFMaker Office COM Addin, and then "Go".
I then see Acrobat PDFMaker Office COM Addin is unchecked. When I check it, it notes that "This add-in is installed for all users on this computer, and can only be connected or disconnected by an administrator". See attached jpg for details. Please advise.
Thanks,
JoeAs the instructions indicate, log in as the administrator and activate the option. If you do not have access to the administrator account, then ask your IT folks to do it for you.
-
Pooladm: cannot enable pools: No such file or directory
I'm having a problem enabling pools in Solaris 10. I used a core installation and manually installed the SUNWpool, SUNWpoolr, SUNWzoner, and SUNWzoneu packages.
When I try to execute "pooladm -e" to enable pools I get the following error:
pooladm: cannot enable pools: No such file or directory
Also, when I enable the svc:/system/pools:default service it errors into maintenance state with the same error in the log file.
I believe the problem is related to the non-existance of /dev/pool, but I'm not sure why it is not there.
Here is the output from truss:
bash-3.00# truss -f pooladm -e
2753: execve("/usr/sbin/pooladm", 0xFFBFFC8C, 0xFFBFFC98) argc = 2
2753: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
2753: resolvepath("/usr/sbin/pooladm", "/usr/sbin/pooladm", 1023) = 17
2753: stat("/usr/sbin/pooladm", 0xFFBFFA68) = 0
2753: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
2753: stat("/lib/libpool.so.1", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libpool.so.1", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libpool.so.1", "/usr/lib/libpool.so.1", 1023) = 21
2753: open("/usr/lib/libpool.so.1", O_RDONLY) = 3
2753: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF370000
2753: mmap(0xFF370000, 93041, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF370000
2753: mmap(0xFF398000, 7097, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF398000
2753: munmap(0xFF388000, 65536) = 0
2753: memcntl(0xFF370000, 17100, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libc.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
2753: open("/lib/libc.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000
2753: mmap(0xFF200000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000
2753: mmap(0xFF2EE000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF2EE000
2753: mmap(0xFF2F6000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2F6000
2753: munmap(0xFF2DE000, 65536) = 0
2753: memcntl(0xFF200000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libxml2.so.2", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libxml2.so.2", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libxml2.so.2", "/usr/lib/libxml2.so.2", 1023) = 21
2753: open("/usr/lib/libxml2.so.2", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 1540096, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF080000
2753: mmap(0xFF080000, 1397070, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF080000
2753: mmap(0xFF1E4000, 72885, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1392640) = 0xFF1E4000
2753: mmap(0xFF1F6000, 2168, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F6000
2753: munmap(0xFF1D6000, 57344) = 0
2753: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF360000
2753: memcntl(0xFF080000, 202876, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libscf.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libscf.so.1", "/lib/libscf.so.1", 1023) = 16
2753: open("/lib/libscf.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF330000
2753: mmap(0xFF330000, 97095, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF330000
2753: mmap(0xFF358000, 4934, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF358000
2753: munmap(0xFF348000, 65536) = 0
2753: memcntl(0xFF330000, 20432, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libnvpair.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libnvpair.so.1", "/lib/libnvpair.so.1", 1023) = 19
2753: open("/lib/libnvpair.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000
2753: mmap(0xFF310000, 24206, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000
2753: mmap(0xFF326000, 1192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFF326000
2753: munmap(0xFF316000, 65536) = 0
2753: memcntl(0xFF310000, 7604, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libexacct.so.1", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libexacct.so.1", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libexacct.so.1", "/usr/lib/libexacct.so.1", 1023) = 23
2753: open("/usr/lib/libexacct.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF060000
2753: mmap(0xFF060000, 15042, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF060000
2753: mmap(0xFF074000, 888, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFF074000
2753: munmap(0xFF064000, 65536) = 0
2753: memcntl(0xFF060000, 3568, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libpthread.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libpthread.so.1", "/lib/libpthread.so.1", 1023) = 20
2753: open("/lib/libpthread.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00002000, 16384, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3EC000
2753: mmap(0xFF3EC000, 12032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF3EC000
2753: close(3) = 0
2753: stat("/lib/libz.so.1", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libz.so.1", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libz.so.1", "/usr/lib/libz.so.1", 1023) = 18
2753: open("/usr/lib/libz.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 139264, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF030000
2753: mmap(0xFF030000, 69442, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF030000
2753: mmap(0xFF050000, 6012, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 65536) = 0xFF050000
2753: munmap(0xFF042000, 57344) = 0
2753: memcntl(0xFF030000, 5032, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libm.so.2", 0xFFBFF520) = 0
2753: resolvepath("/lib/libm.so.2", "/lib/libm.so.2", 1023) = 14
2753: open("/lib/libm.so.2", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 786432, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF00000
2753: mmap(0xFEF00000, 693647, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF00000
2753: mmap(0xFEFB8000, 28592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 688128) = 0xFEFB8000
2753: munmap(0xFEFAA000, 57344) = 0
2753: memcntl(0xFEF00000, 33076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libsocket.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19
2753: open("/lib/libsocket.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF000000
2753: mmap(0xFF000000, 44594, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF000000
2753: mmap(0xFF01C000, 4277, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF01C000
2753: munmap(0xFF00C000, 65536) = 0
2753: memcntl(0xFF000000, 14320, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libnsl.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
2753: open("/lib/libnsl.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE00000
2753: mmap(0xFEE00000, 594942, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE00000
2753: mmap(0xFEEA2000, 33745, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFEEA2000
2753: mmap(0xFEEAC000, 23232, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEEAC000
2753: munmap(0xFEE92000, 65536) = 0
2753: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000
2753: memcntl(0xFEE00000, 89508, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libdoor.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libdoor.so.1", "/lib/libdoor.so.1", 1023) = 17
2753: open("/lib/libdoor.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 81920, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFE0000
2753: mmap(0xFEFE0000, 3315, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEFE0000
2753: mmap(0xFEFF2000, 600, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 8192) = 0xFEFF2000
2753: munmap(0xFEFE2000, 65536) = 0
2753: memcntl(0xFEFE0000, 2240, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libuutil.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libuutil.so.1", "/lib/libuutil.so.1", 1023) = 18
2753: open("/lib/libuutil.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 106496, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEE0000
2753: mmap(0xFEEE0000, 26032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEE0000
2753: mmap(0xFEEF8000, 1882, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 32768) = 0xFEEF8000
2753: munmap(0xFEEE8000, 65536) = 0
2753: memcntl(0xFEEE0000, 6652, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libgen.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libgen.so.1", "/lib/libgen.so.1", 1023) = 16
2753: open("/lib/libgen.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEC0000
2753: mmap(0xFEEC0000, 22089, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEC0000
2753: mmap(0xFEED6000, 2303, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFEED6000
2753: munmap(0xFEEC6000, 65536) = 0
2753: memcntl(0xFEEC0000, 5656, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: munmap(0xFF3A0000, 8192) = 0
2753: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFD0000
2753: getcontext(0xFFBFF758)
2753: getrlimit(RLIMIT_STACK, 0xFFBFF738) = 0
2753: getpid() = 2753 [2752]
2753: setustack(0xFEFD2088)
2753: sigfillset(0xFF2F64D8) = 0
2753: stat("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", 0xFFBFF1B0) = 0
2753: resolvepath("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", "/platform/sun4v/lib/libc_psr.so.1", 1023) = 33
2753: open("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", O_RDONLY) = 3
2753: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEDF0000
2753: close(3) = 0
2753: brk(0x00022448) = 0
2753: brk(0x00024448) = 0
2753: getprivimplinfo(0xFFBFF2E0, 2076) = 0
2753: sysconfig(_CONFIG_NGROUPS) = 16
2753: zone_lookup("") = 0
2753: zone_getattr(0, ZONE_ATTR_PRIVSET, 0xFEFD02C8, 12) = 12
2753: getppriv(PRIV_EFFECTIVE, {ffffffffffffffffffffffff}) = 0
2753: open64("/dev/pool", O_RDONLY) Err#2 ENOENT
2753: fstat64(2, 0xFFBFEC88) = 0
pooladm2753: write(2, " p o o l a d m", 7) = 7
: 2753: write(2, " : ", 2) = 2
cannot enable pools2753: write(2, " c a n n o t e n a b l".., 19) = 19
: 2753: write(2, " : ", 2) = 2
No such file or directory2753: write(2, " N o s u c h f i l e".., 25) = 25
2753: write(2, "\n", 1) = 1
2753: _exit(1)All it took was running devfsadm and the errors were gone.
-
How to enable CUDA in T61?
Thankshttp://blog.csdn.net/kron/archive/2008/04/30/2350782.aspx
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Hello I have Adobe Flash Player installed but cannot enable it.
Hello I have Adobe Flash Player installed but cannot enable it.
NPAPI is installed on my Mac but I cannot enable it - is there a customer service number for Adobe I can call
-
As the title says, I cannot enable find my mac, i am running 10.8.2, and cant see any updates in the app store,
I've looked up some things and I think that my recovery hd isn't up to date, there is a patch for updating you recovery hd, but only for 10.7,
Any ideas on fixing this? I read that rerunning the mountain lion install would recreate the recovery hd (question: would i lose my data?), but when i try to run it it says:
this disk isn't using guid partitionlabeling, change it with diskutility, but in diskutility i cant find a way to change this..
thanks for the helpYou have a very strange partition table because of three reasons:
It's MBR, and you need a GUID partition table.
You have the Boot Camp volume above your OS X volume.
You have three partitions on your hard disk, and Boot Camp only allows two partitions on the hard disk.
You need to erase the whole hard disk, so you have to make backups. For OS X, you can use Time Machine to back up your hard disk or you can use Carbon Copy Cloner to make a clone on an external disk. For Windows, use WinClone. You will need an external disk, so if you haven't got one, you should buy it.
Then, to install Mountain Lion, as you haven't got the Recovery HD for Mountain Lion, you can use Lion Diskmaker to copy the Mountain Lion installer onto a DVD or USB drive.
After doing all those steps, follow these ones to install Mountain Lion again on a GUID partition table.
Open Boot Camp Assistant and delete the Boot Camp partition. If it doesn't allow you, skip this step.
Insert the USB drive or DVD with Mountain Lion, press Option key while your Mac is starting and choose the DVD or USB drive with Mountain Lion.
OS X Utilities window will appear, so open Disk Utility. Here's when the fun starts.
Select your hard disk at the top of the sidebar and go to Partition tab.
On the window, choose "Options" and select GUID Partition Table. Then, press OK.
You will return to the Partition. Select each partition one by one on the bar and press - button until all disappear.
Then, press + button, choose "Mac OS Extended (Journaled)" in Format and press Apply.
When it has finished, close Disk Utility and install OS X. It can take from 15 minutes to 30, depending of the disk you are using to install Mountain Lion and if you are installing it onto a HDD or SSD.
When the installation finishes, restore the backups so you will leave your Mac as it was before erasing the disk -
Cannot enable aero after turning on (and then off) battery stretch
I have a T520 running Win7 x64. I turned on battery stretch in the power manager the other day, and after turning it off I cannot enable aero again.
I've selected an aero theme, but windows does not turn on aero.
A screenshot of my desktop settings is here - as shown I have a aero theme selected but both appearance and properties tell me aero is disabled.
http://imageshack.us/photo/my-images/440/aerok.png/
I'm seeing a lot of advice on how to disable it but unsure which to follow. As this problem seems to have ben caused by the power manager I was wondering if any others had experienced this and could advise on how to fix it.I just tried to enable and disable it and it appears it is not reproducible.
I suspect it somehow got confounded by the fact I have a few monitor configurations I use:
1. Work - displayport to U3011 WQXGA and d-sub to a samsung UXGA
2. Home - displayport to adapter to WFP3007 and laptop lcd as secondary screen
3. Road - laptop lcd
I quite often change the order in which I power/suspend/resume and plug/unplug the various monitors and windows (somewhat understandably) throws a hissy fit from time to time. So I guess this was just another case of that -
I cannot enable my podcats in I tunes. I have a Dell pc with windows vista--Help plse?
I cannot enable podcasts in I tunes--I have a Dell pc with windows vista--help--plse
https://support.mozilla.com/en-US/kb/Preferences+are+not+saved
-
After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.
I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps! -
"User" Library in the FontBook is "Off" and I cannot enable it. Help!
Few weeks ago I decided to speed up my new Mac little bit by turning all fonts in the "User" Library "Off". Yesterday I needed some fonts which are in the User library, so I opened FontBook and tried to enable "User" library, but I could not. I cannot enable it anymore. I can click on "Enable "User"", but nothing changes. It remains with the "Off" label, and shows no fonts in it, while in reality there are 50 fonts there (~/Library/Fonts). Any ideas how to enable it again? Please help. Thanks in advance!
Guntis Bukalders:
Unless you have a good reason for having FileVault turned on, I suggest you turn it off. I can cause a lot of grief i get a bit too much on our HDD. It utilizes your HDD space for a sparse image approximately the size of your Users Folder.
Is there a reason why you wanted it turned Font Book off?
I enabling User in the Edit menu doesn't do it try this. Shut down your computer completely. Then try starting up in Safe Mode, log in, empty Trash, retart computer and log in normally. Open Font Book and try enabling user again.
Good luck.
cornelius
Message was edited by: cornelius -
Oracle.xml.sql.OracleXMLSQLException:Cannot enable auto commit within JTS transaction
Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
at java.lang.Throwable.fillInStackTrace(Native Method)
at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
MalcolmClearly , there does seem to be something a bit odd with the above stack.
<Bug:1917808> mentions OracleXMLSave in context of plsql equivalent : dbms_xmlsave . i.e dbms_xmlsave is a wrapper around OracleXMLSave class.
disabling autocommit on connection as follows should help:
conn = DriverManager.getConnection("connect string","scott","tiger");
conn.setAutoCommit(false);
to disble auto commit and see if this has an effect.
This issue might be <Bug:1497506>. If disabling autocommit does not work then it appears that it could be this issue .
Malcolm
Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
at java.lang.Throwable.fillInStackTrace(Native Method)
at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
Malcolm -
ORA-00385: cannot enable Very Large Memory with new buffer cache 11.2.0.2
[oracle@bnl11237dat01][DWH11]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jun 20 09:19:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount pfile=/u01/app/oracle/product/11.2.0/dbhome_1/dbs//initDWH11.ora
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
DWH12.__large_pool_size=16777216
DWH11.__large_pool_size=16777216
DWH11.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DWH12.__pga_aggregate_target=2902458368
DWH11.__pga_aggregate_target=2902458368
DWH12.__sga_target=4328521728
DWH11.__sga_target=4328521728
DWH12.__shared_io_pool_size=0
DWH11.__shared_io_pool_size=0
DWH12.__shared_pool_size=956301312
DWH11.__shared_pool_size=956301312
DWH12.__streams_pool_size=0
DWH11.__streams_pool_size=134217728
#*._realfree_heap_pagesize_hint=262144
#*._use_realfree_heap=TRUE
*.audit_file_dest='/u01/app/oracle/admin/DWH/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='/dborafiles/mdm_bn/dwh/oradata01/DWH/control01.ctl','/dborafiles/mdm_bn/dwh/orareco/DWH/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='DWH'
*.db_recovery_file_dest='/dborafiles/mdm_bn/dwh/orareco'
*.db_recovery_file_dest_size=7373586432
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DWH1XDB)'
DWH12.instance_number=2
DWH11.instance_number=1
DWH11.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat01-vip)(PORT=1521))))'
DWH12.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat02-vip)(PORT=1521))))'
*.log_archive_dest_1='LOCATION=/dborafiles/mdm_bn/dwh/oraarch'
*.log_archive_format='DWH_%t_%s_%r.arc'
#*.memory_max_target=7226785792
*.memory_target=7226785792
*.open_cursors=1000
*.processes=500
*.remote_listener='LISTENERS_SCAN'
*.remote_login_passwordfile='exclusive'
*.sessions=555
DWH12.thread=2
DWH11.thread=1
DWH12.undo_tablespace='UNDOTBS2'
DWH11.undo_tablespace='UNDOTBS1'
SPFILE='/dborafiles/mdm_bn/dwh/oradata01/DWH/spfileDWH1.ora' # line added by Agent
[oracle@bnl11237dat01][DWH11]$ cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
#kernel.shmall = 4294967296
kernel.shmall = 8250344
# Oracle kernel parameters
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
Please can I know how to resolve this error.CAUSE: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
ACTION: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters
Maybe you are looking for
-
Can i get my money back if an app does not work?
I purchased GPS Philippines on I tunes. It does not work. (neiter on I phone nor on IPad mini) No map is showing. The assistance button leads to a webpage that does not exist. The only thing I know is the name of the maker, a Mr. Jing Li. Since I was
-
Adobe Reader fails to open pdf links on internet websites
My computer is running Windows 7, Norton AntiVirus, Internet Explorer 9 and Adobe Reader X. I am able to open and view pdf file attachments in e-mail messages, but am not able to open or view pdf files from website links or web-based sources. When a
-
Why is the text so faint on 4S?
Why did Apple make the text so faint in 4S? I'm not saying that the previous one was in BOLD, but it was definitely clearer to see. Now it looks so faint. Is there a way to make the text look thicker, if not bolder? Thanks
-
REUSE_ALV_GRID_DISPLAY (two settings for output display)
Hi all, I am using REUSE_ALV_GRID_DISPLAY FM to display the contents of my internal table. I have about 53 columns to display. I have two requirements. 1. After I display the list, I want to see the first 3 columns all the time when I scroll horizont
-
Hi, I created a workflow for approval appropriation request. There are various approval levels for an appropriation request. Is there a report that show me, who process the appropriation request at a given time? More precisely, is there a report that