Cannot enable Bluetooth on 8110

I purchased a shiny new 8110 today and immediately tried to connect to my old RAZR to transfer some pics. I was able to pair/connect but I didn't know the trick to transfer pics. Now it is later in the day and I am back to trying to connect to the RAZR again. I go to the Bluetooth options screen, go to the menu and select enable bluetooth, the splash screen pops up and says bluetooth enabled (also the title bar briefly changes to "Bluetooth: Enabled", but that last maybe 1/4 second) but the title bar still says "Bluetooth: Disabled" and I am unable to connect to the variety of Bluetooth device that I have available.
What are some tips and tricks I can try to get it to say enabled? 

Go to Bluetooth Options -> select Cancel -> click Menu and select Options -> Discoveable: Yes -> press escape button and Save. Again click Menu and select Enable Bluetooth. Click Menu and select Add Device. Next time onwards you can start straight from Search for devices from here.
Now pair both the devices with a paskey. Send the content from RAZR and go to Media application on you Blackberry -> enter into desired media folder -> click Menu and select Receive using Bluetooth.
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • Cannot enable Bluetooth after v4.5 software upgrade

    Hi, have upgraded to Device software v4.5 on my 8800. The paired devices were no longer there although other stuff such as address book, calendar etc where rinstalled OK. I cannot enable bluetooth, it just hangs with message "enabling bluetooth"and pulling the battery waiting a minute and then restarting does not help. Any ideas please?

    I have done exactly the same thing to mine, cannot update from the O2 website, O2 are no help at all, RIM want to charge £129 +vat for repairing the phone which is just a rip off. This was a free upgrade offered and advertised by RIM which has impaired the operation of my phone what do they intend to do about it? Nothing thats what. If it wasn't for the web browsing, email and ease of use of the phone, the blackberry would be straight in the bin and replaced by a nokia, at least you get support with them.

  • N9: Cannot enable Bluetooth (anymore)

    I bought a N9 a few weeks ago. I tried to copy my contacts via Bluetooth from my C3-01, but it would not work, as the connection could not be set up properly.
    Since a week I cannot even enable Bluetooth anymore. When I choose the menu option (Settings - Bluetooth) it takes about 20 seconds and nothing happens. Then I get to the bluetooth menu, where I cannot switch it on.. It just hangs and hangs...
    Has anybody encountered this problem?

    _neg_ wrote:
    As I understand Hard Reset will remove all data, settings and application, am I right ?
    Yes you are, upon N9 it is called "Clear device":
    To Clear Device, do the following:
    Open “Settings”
    Tap “Reset”
    Choose “Clear Device”
    Tap “Yes” to confirm the process.
    This process may take up to 15 minutes depending on the data stored in the phone. You may need to wait for the process to complete. The phone will switch off and then on again.
    Happy to have helped forum with a Support Ratio = 42.5

  • Cannot enable Bluetooth on 8520

    Hi Guys,
    Have had my curve for a while but just got my new car kit installed.  Tried to find the device with but It won't enable Bluetooth.  It does seem to attempt because it says "enabling bluetooth" but just stops with no error message or anything.  V. strange.
    Have been playing about with it for a while now but no joy... any ideas?
    Thanks in advance,
    Caoimhe

    Hi
    1. Check if BT is available on your notebook (BT label at the bottom side must be available). If yes do follow:
    2. Put WLAN switcher to ON position.
    3. When the WLAN LED is on use FN+F8 key combination and ENABLE BT option.
    After doing this new hardware will be recognized and installed. Check please document posted by deepblue.

  • Cannot enable bluetooth on Blackberry 8330...HELP!!!!

    OK I have a brand new Curve 8330. I had paired it with the Plantronics Voyager headset and it has worked for a week now. Today I noticed my BT icon is not displaying so I went in and saw that Bluetooth had been enabled. Initial time into the BT options is searches for devices coming up with the "enabling bluetooth"  message. After a couple of seconds that goes away and my BT still shows as disabled.
    I go through the menu options and again attempt to enable, this time as soon as I click enable the menu disappears and nothing happens.
    This was working fine yesterday. Have not installed or connected it to anything else since it was last working.
    Any ideas on where to go next?
    Thanks,
    JR
    Solved!
    Go to Solution.

    Try resetting the device by removing the battery for 1 min then replacing it. Try after it boots back up
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Cannot enable bluetooth

    I am unable to enable Bluetooth on my 24" iMac (purchased new in Mar 2009), which I'm fairly certain has Bluetooth built-in.
    When I try to enable Bluetooth in the Bluetooth System Preferences, clicking on the "On" checkbox briefly shows a checkmark, but it immediately gets unchecked. The Discoverable checkbox is checked, but greyed out. The Bluetooth status icon in the menu bar simply reports "Bluetooth: Off".
    I am unable to see anything of relevance in the system console logs. I have tried deleting the /Library/Preferences/com.apple.Bluetooth.plist and ~/Library/Preferences/ByHost/com.apple.Bluetooth.xxxxxxxx-xxxx-xxxx-xxxx-xxxxxx xxxxxx.plist files and rebooting. I have also tried enabling Bluetooth from a freshly created account, with identical behavior.
    The Bluetooth entry in the the system profiler reports:
    Apple Bluetooth Software Version: 2.2.4f3
    Services:
    Bluetooth File Transfer:
    Folder other devices can browse: ~/Public
    Requires Authentication: Yes
    State: Enabled
    Bluetooth File Exchange:
    Folder for accepted items: ~/Downloads
    Requires Authentication: No
    When receiving items: Prompt for each file
    State: Enabled
    Any ideas?

    Then, you have a hosed installation or a broken bluetooth radio. I get viable checkmarks in the prefPane and this in System Profiler, with bluetooth on or off:
    Apple Bluetooth Software Version: 2.2.4f3
    Hardware Settings:
    localhost:
    Address: 00-1f-5b-79-be-45
    Manufacturer: Cambridge Silicon Radio
    Firmware Version: 1965
    Bluetooth Power: On
    Discoverable: Yes
    HCI Version: 3 ($3)
    HCI Revision: 1965 ($7ad)
    LMP Version: 3 ($3)
    LMP Subversion: 1965 ($7ad)
    Device Type (Major): Computer
    Device Type (Complete): Macintosh Desktop
    Composite Class Of Device: 3670276 ($380104)
    Device Class (Major): 1 ($1)
    Device Class (Minor): 1 ($1)
    Service Class: 448 ($1c0)
    Requires Authentication: No
    Services:
    Bluetooth File Transfer:
    Folder other devices can browse: ~/Public
    Requires Authentication: Yes
    State: Enabled
    Bluetooth File Exchange:
    Folder for accepted items: ~/Downloads
    Requires Authentication: No
    When other items are accepted: Ask
    When PIM items are accepted: Ask
    When receiving items: Prompt for each file
    State: Enabled
    Incoming Serial Ports:
    Serial Port 1:
    Name: Bluetooth-PDA-Sync
    RFCOMM Channel: 3
    Requires Authentication: No
    Outgoing Serial Ports:
    Serial Port 1:
    Address:
    Name: Bluetooth-Modem
    RFCOMM Channel: 0
    Requires Authentication: No
    But since no hardware is shown on your machine, its most likely a broken bluetooth radio. A trip with the iMac to the local Apple Store is suggested.

  • 8330 cannot enable bluetooth

    Had the device for about 20 months and bluetooth always worked fine.  But I have not used in probably 6 months.  Went to used and I can not enable it.  It just sits there.  I have tried it from the Bluetooth icon and from the manage connection icon.  I have done dozens of battery pulls.  I downgraded the OS - no change.  Put back the latest OS and still no joy.
    The unit is fully charged.
    Modified all of the options in the bluetooth icon with more battery pulls
    I see a number of post on this subject and rarely do I see a sucessful result.
    At 20 months, I know I probably should just go get a new unit but that is not my first choice.
    Any thoughts?
    Thanks
    Carrier Verizon
    Device Software 4.5.0.175

    Try resetting the device by removing the battery for 1 min then replacing it. Try after it boots back up
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Cannot disable or enable Bluetooth with user rights

    Hi,
     If user do not have administrator rights he/she cannot disable or enable bluetooth using Fn+F5 menu.Is there any solution to this problem?

    Still looking for solution....

  • Satellite L655-145 cannot install bluetooth stack

    Cannot install bluetooth stack. Setup programm just freeze. All other drivers installed successfuly. Device manager show only Bluetooth ACPI device. This problem appeared after updating BIOS from original version 1.80 to older (1.80->1.90->2.10->2.20). Downgrade to 1.80 take no effect.
    PS. Sorry for my bad english.

    Hi
    As far as I know the notebook is equipped with an WIFI and Bluetooth combo card!
    This means that Wlan and BT functionality is controlled by one card.
    If you downgraded the BIOS (dont know why) please set this to default firstly.
    Save the changes and reboot the notebook.
    Then download the BT stack from Toshiba BT portal.
    Enable the BT (FN+F8) and then start the BT stack installation once again.

  • Can't enable Bluetooth on my Satellite A300- 1BZ

    The package of my notebook listed bluetooth on this but I cannot enable this. Operating FN-F8 just shows WiFi on/off.
    Also there seems to be nothing in the control panel or device manager . I was wondering if it maybe the earlier bios upgade to 3.6 version was the problem but I dont know if it was on before this.

    Please apologize but this has nothing to do with arrogance.
    Usually you have to check firstly the notebook hardware specifications before you would start to enable something Furthermore before using any devices you should take a look into the user manual if such device is available or not.
    Many people ask something which was already described in the user manual or already mentioned on the forum

  • Sun Cluster 3.2 - WARNING: Cannot enable monitoring on resource-group

    clrg online -emM ora-1line-rg(C348385) WARNING: Cannot enable monitoring on resource ora-1line-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-1line-rs' and re-enable monitoring using 'clresource monitor ora-1line-rs'.
    (logical host reference)
    (C348385) WARNING: Cannot enable monitoring on resource ora-hastp-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-hastp-rs' and re-enable monitoring using 'clresource monitor ora-hastp-rs'.
    (hastorageplus reference)
    I am able to unmonitor and monitor the resources manually. What is the cause of these WARNING messages? This from Oracle and we have yet to complete the installation of HA-Oracle. Oracle is not installed and tnsnames.ora and listener.ora is not configured. Is this the reason? If so, could someone explain why you cannot online the resource group until after the application has been installed.
    Thanks in advance,
    Ryan

    As the manual says for clrs create:
    By default, resources are created in the  enabled  state with  monitoring enabled. so when you issue the clrg online -emM it is just simply warning you that these other resources weren't disable. Note they wouldn't have been started because the RG would have been offline.
    Does that explain it? If not, ask more questions.
    Tim
    ---

  • Cannot enable acrobat 8.1.3 addin in Word 2007

    Hi,
    I cannot enable acrobat 8.1.3 addin in Word 2007.  In Word 2007 I go to the top left circle, word options, Add-Ins, Disabled Application Add-ins,  Acrobat PDFMaker Office COM Addin, and then "Go".
    I then see Acrobat PDFMaker Office COM Addin is unchecked.  When I check it, it notes that "This add-in is installed for all users on this computer, and can only be connected or disconnected by an administrator".  See attached jpg for details.  Please advise.
    Thanks,
    Joe

    As the instructions indicate, log in as the administrator and activate the option. If you do not have access to the administrator account, then ask your IT folks to do it for you.

  • Pooladm: cannot enable pools: No such file or directory

    I'm having a problem enabling pools in Solaris 10. I used a core installation and manually installed the SUNWpool, SUNWpoolr, SUNWzoner, and SUNWzoneu packages.
    When I try to execute "pooladm -e" to enable pools I get the following error:
    pooladm: cannot enable pools: No such file or directory
    Also, when I enable the svc:/system/pools:default service it errors into maintenance state with the same error in the log file.
    I believe the problem is related to the non-existance of /dev/pool, but I'm not sure why it is not there.
    Here is the output from truss:
    bash-3.00# truss -f pooladm -e
    2753:   execve("/usr/sbin/pooladm", 0xFFBFFC8C, 0xFFBFFC98)  argc = 2
    2753:   resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
    2753:   resolvepath("/usr/sbin/pooladm", "/usr/sbin/pooladm", 1023) = 17
    2753:   stat("/usr/sbin/pooladm", 0xFFBFFA68)           = 0
    2753:   open("/var/ld/ld.config", O_RDONLY)             Err#2 ENOENT
    2753:   stat("/lib/libpool.so.1", 0xFFBFF520)           Err#2 ENOENT
    2753:   stat("/usr/lib/libpool.so.1", 0xFFBFF520)       = 0
    2753:   resolvepath("/usr/lib/libpool.so.1", "/usr/lib/libpool.so.1", 1023) = 21
    2753:   open("/usr/lib/libpool.so.1", O_RDONLY)         = 3
    2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF370000
    2753:   mmap(0xFF370000, 93041, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF370000
    2753:   mmap(0xFF398000, 7097, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF398000
    2753:   munmap(0xFF388000, 65536)                       = 0
    2753:   memcntl(0xFF370000, 17100, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libc.so.1", 0xFFBFF520)              = 0
    2753:   resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
    2753:   open("/lib/libc.so.1", O_RDONLY)                = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000
    2753:   mmap(0xFF200000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000
    2753:   mmap(0xFF2EE000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF2EE000
    2753:   mmap(0xFF2F6000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2F6000
    2753:   munmap(0xFF2DE000, 65536)                       = 0
    2753:   memcntl(0xFF200000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libxml2.so.2", 0xFFBFF520)           Err#2 ENOENT
    2753:   stat("/usr/lib/libxml2.so.2", 0xFFBFF520)       = 0
    2753:   resolvepath("/usr/lib/libxml2.so.2", "/usr/lib/libxml2.so.2", 1023) = 21
    2753:   open("/usr/lib/libxml2.so.2", O_RDONLY)         = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 1540096, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF080000
    2753:   mmap(0xFF080000, 1397070, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF080000
    2753:   mmap(0xFF1E4000, 72885, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1392640) = 0xFF1E4000
    2753:   mmap(0xFF1F6000, 2168, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F6000
    2753:   munmap(0xFF1D6000, 57344)                       = 0
    2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF360000
    2753:   memcntl(0xFF080000, 202876, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libscf.so.1", 0xFFBFF520)            = 0
    2753:   resolvepath("/lib/libscf.so.1", "/lib/libscf.so.1", 1023) = 16
    2753:   open("/lib/libscf.so.1", O_RDONLY)              = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF330000
    2753:   mmap(0xFF330000, 97095, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF330000
    2753:   mmap(0xFF358000, 4934, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF358000
    2753:   munmap(0xFF348000, 65536)                       = 0
    2753:   memcntl(0xFF330000, 20432, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libnvpair.so.1", 0xFFBFF520)         = 0
    2753:   resolvepath("/lib/libnvpair.so.1", "/lib/libnvpair.so.1", 1023) = 19
    2753:   open("/lib/libnvpair.so.1", O_RDONLY)           = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000
    2753:   mmap(0xFF310000, 24206, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000
    2753:   mmap(0xFF326000, 1192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFF326000
    2753:   munmap(0xFF316000, 65536)                       = 0
    2753:   memcntl(0xFF310000, 7604, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libexacct.so.1", 0xFFBFF520)         Err#2 ENOENT
    2753:   stat("/usr/lib/libexacct.so.1", 0xFFBFF520)     = 0
    2753:   resolvepath("/usr/lib/libexacct.so.1", "/usr/lib/libexacct.so.1", 1023) = 23
    2753:   open("/usr/lib/libexacct.so.1", O_RDONLY)       = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF060000
    2753:   mmap(0xFF060000, 15042, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF060000
    2753:   mmap(0xFF074000, 888, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFF074000
    2753:   munmap(0xFF064000, 65536)                       = 0
    2753:   memcntl(0xFF060000, 3568, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libpthread.so.1", 0xFFBFF520)        = 0
    2753:   resolvepath("/lib/libpthread.so.1", "/lib/libpthread.so.1", 1023) = 20
    2753:   open("/lib/libpthread.so.1", O_RDONLY)          = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00002000, 16384, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3EC000
    2753:   mmap(0xFF3EC000, 12032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF3EC000
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libz.so.1", 0xFFBFF520)              Err#2 ENOENT
    2753:   stat("/usr/lib/libz.so.1", 0xFFBFF520)          = 0
    2753:   resolvepath("/usr/lib/libz.so.1", "/usr/lib/libz.so.1", 1023) = 18
    2753:   open("/usr/lib/libz.so.1", O_RDONLY)            = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 139264, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF030000
    2753:   mmap(0xFF030000, 69442, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF030000
    2753:   mmap(0xFF050000, 6012, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 65536) = 0xFF050000
    2753:   munmap(0xFF042000, 57344)                       = 0
    2753:   memcntl(0xFF030000, 5032, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libm.so.2", 0xFFBFF520)              = 0
    2753:   resolvepath("/lib/libm.so.2", "/lib/libm.so.2", 1023) = 14
    2753:   open("/lib/libm.so.2", O_RDONLY)                = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 786432, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF00000
    2753:   mmap(0xFEF00000, 693647, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF00000
    2753:   mmap(0xFEFB8000, 28592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 688128) = 0xFEFB8000
    2753:   munmap(0xFEFAA000, 57344)                       = 0
    2753:   memcntl(0xFEF00000, 33076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libsocket.so.1", 0xFFBFF520)         = 0
    2753:   resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19
    2753:   open("/lib/libsocket.so.1", O_RDONLY)           = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF000000
    2753:   mmap(0xFF000000, 44594, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF000000
    2753:   mmap(0xFF01C000, 4277, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF01C000
    2753:   munmap(0xFF00C000, 65536)                       = 0
    2753:   memcntl(0xFF000000, 14320, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libnsl.so.1", 0xFFBFF520)            = 0
    2753:   resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
    2753:   open("/lib/libnsl.so.1", O_RDONLY)              = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE00000
    2753:   mmap(0xFEE00000, 594942, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE00000
    2753:   mmap(0xFEEA2000, 33745, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFEEA2000
    2753:   mmap(0xFEEAC000, 23232, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEEAC000
    2753:   munmap(0xFEE92000, 65536)                       = 0
    2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000
    2753:   memcntl(0xFEE00000, 89508, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libdoor.so.1", 0xFFBFF520)           = 0
    2753:   resolvepath("/lib/libdoor.so.1", "/lib/libdoor.so.1", 1023) = 17
    2753:   open("/lib/libdoor.so.1", O_RDONLY)             = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 81920, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFE0000
    2753:   mmap(0xFEFE0000, 3315, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEFE0000
    2753:   mmap(0xFEFF2000, 600, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 8192) = 0xFEFF2000
    2753:   munmap(0xFEFE2000, 65536)                       = 0
    2753:   memcntl(0xFEFE0000, 2240, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libuutil.so.1", 0xFFBFF520)          = 0
    2753:   resolvepath("/lib/libuutil.so.1", "/lib/libuutil.so.1", 1023) = 18
    2753:   open("/lib/libuutil.so.1", O_RDONLY)            = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 106496, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEE0000
    2753:   mmap(0xFEEE0000, 26032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEE0000
    2753:   mmap(0xFEEF8000, 1882, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 32768) = 0xFEEF8000
    2753:   munmap(0xFEEE8000, 65536)                       = 0
    2753:   memcntl(0xFEEE0000, 6652, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libgen.so.1", 0xFFBFF520)            = 0
    2753:   resolvepath("/lib/libgen.so.1", "/lib/libgen.so.1", 1023) = 16
    2753:   open("/lib/libgen.so.1", O_RDONLY)              = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEC0000
    2753:   mmap(0xFEEC0000, 22089, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEC0000
    2753:   mmap(0xFEED6000, 2303, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFEED6000
    2753:   munmap(0xFEEC6000, 65536)                       = 0
    2753:   memcntl(0xFEEC0000, 5656, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   munmap(0xFF3A0000, 8192)                        = 0
    2753:   mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFD0000
    2753:   getcontext(0xFFBFF758)
    2753:   getrlimit(RLIMIT_STACK, 0xFFBFF738)             = 0
    2753:   getpid()                                        = 2753 [2752]
    2753:   setustack(0xFEFD2088)
    2753:   sigfillset(0xFF2F64D8)                          = 0
    2753:   stat("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", 0xFFBFF1B0) = 0
    2753:   resolvepath("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", "/platform/sun4v/lib/libc_psr.so.1", 1023) = 33
    2753:   open("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", O_RDONLY) = 3
    2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEDF0000
    2753:   close(3)                                        = 0
    2753:   brk(0x00022448)                                 = 0
    2753:   brk(0x00024448)                                 = 0
    2753:   getprivimplinfo(0xFFBFF2E0, 2076)               = 0
    2753:   sysconfig(_CONFIG_NGROUPS)                      = 16
    2753:   zone_lookup("")                                 = 0
    2753:   zone_getattr(0, ZONE_ATTR_PRIVSET, 0xFEFD02C8, 12) = 12
    2753:   getppriv(PRIV_EFFECTIVE, {ffffffffffffffffffffffff}) = 0
    2753:   open64("/dev/pool", O_RDONLY)                   Err#2 ENOENT
    2753:   fstat64(2, 0xFFBFEC88)                          = 0
    pooladm2753:    write(2, " p o o l a d m", 7)                   = 7
    : 2753: write(2, " :  ", 2)                             = 2
    cannot enable pools2753:        write(2, " c a n n o t   e n a b l".., 19)      = 19
    : 2753: write(2, " :  ", 2)                             = 2
    No such file or directory2753:  write(2, " N o   s u c h   f i l e".., 25)      = 25
    2753:   write(2, "\n", 1)                               = 1
    2753:   _exit(1)

    All it took was running devfsadm and the errors were gone.

  • Hello I have Adobe Flash Player installed but cannot enable it.

    Hello I have Adobe Flash Player installed but cannot enable it.

    NPAPI is installed on my Mac but I cannot enable it - is there a customer service number for Adobe I can call

  • I cannot enable find my mac

    As the title says, I cannot enable find my mac, i am running 10.8.2, and cant see any updates in the app store,
    I've looked up some things and I think that my recovery hd isn't up to date, there is a patch for updating you recovery hd, but only for 10.7,
    Any ideas on fixing this? I read that rerunning the mountain lion install would recreate the recovery hd (question: would i lose my data?), but when i try to run it it says:
    this disk isn't using guid partitionlabeling, change it with diskutility, but in diskutility i cant find a way to change this..
    thanks for the help

    You have a very strange partition table because of three reasons:
    It's MBR, and you need a GUID partition table.
    You have the Boot Camp volume above your OS X volume.
    You have three partitions on your hard disk, and Boot Camp only allows two partitions on the hard disk.
    You need to erase the whole hard disk, so you have to make backups. For OS X, you can use Time Machine to back up your hard disk or you can use Carbon Copy Cloner to make a clone on an external disk. For Windows, use WinClone. You will need an external disk, so if you haven't got one, you should buy it.
    Then, to install Mountain Lion, as you haven't got the Recovery HD for Mountain Lion, you can use Lion Diskmaker to copy the Mountain Lion installer onto a DVD or USB drive.
    After doing all those steps, follow these ones to install Mountain Lion again on a GUID partition table.
    Open Boot Camp Assistant and delete the Boot Camp partition. If it doesn't allow you, skip this step.
    Insert the USB drive or DVD with Mountain Lion, press Option key while your Mac is starting and choose the DVD or USB drive with Mountain Lion.
    OS X Utilities window will appear, so open Disk Utility. Here's when the fun starts.
    Select your hard disk at the top of the sidebar and go to Partition tab.
    On the window, choose "Options" and select GUID Partition Table. Then, press OK.
    You will return to the Partition. Select each partition one by one on the bar and press - button until all disappear.
    Then, press + button, choose "Mac OS Extended (Journaled)" in Format and press Apply.
    When it has finished, close Disk Utility and install OS X. It can take from 15 minutes to 30, depending of the disk you are using to install Mountain Lion and if you are installing it onto a HDD or SSD.
    When the installation finishes, restore the backups so you will leave your Mac as it was before erasing the disk

Maybe you are looking for

  • Creation of multiple records in reciever file as per occurance of 1 segment

    Hi SapAll. i have a got a requirement in an IDOC To File Interface the Requirement is under sending IDOC there will be multiple segments whose fields will me mapped to reciever file,so here i got a business requirement as IDOC - Segment 1-occur for 1

  • I can't show a home-made video on television

    I took a three minute video with my iphone 4, running iOS 4.1. Then I connected the phone to a television using the AV Composite Cable. However all I could get was the sound. No Video. What might I be doing wrong?

  • Analize authority checks in web dynpro processing

    Hi, I'm facing strange things here. A user was reported not to be able to successfully use a function provided in our system: We provide a function for use of our call center agents that will reprocess and output document and send it by mail to the c

  • Minifying clientlibs in a single app

    We have a situation where many sites are running on a single CQ instance. I'm interesting in using the functionality to minify clientlibs as shown at http://dev.day.com/docs/en/cq/current/deploying/configuring_osgi.html, but don't want to affect othe

  • DIsk Utility fail: Where are the "temporary back up files" ?

    I was running out of space on my hard drive, so i freed up 50G by backing up and then deleting some photo and video files. I thought, like on a PC, i could run the disk utility to "erase free space" (and possible give me even more free G's) but it go