Cannot enable eprint through Web Services on my mfp m127fn

Printer - MFP M127fn
I have registered with HP Connect. Asks me to add my printer through Add Device. I need to enter Claim Code. I am able to connect to the URL displayed in my Configuration Page.
I click on Web Services Tab to enable Eprint.
It never connects to enable Eprint and to print out the Information Page that contains the Claim Code.
OS - Windows 7 Professional
Linksys Router.

Hi @Mukhi,
Welcome to the HP Support Forums. I see that you are unable to setup the ePrint feature of your Laserjet M127fn printer.
To better assist you, would you please provide some additional information?
Is the printer connected to your router using an ethernet cable? This printer only supports a USB cable connection or an ethernet connection. For ePrint to work the printer must be connected using an ethernet connection.
Are you getting any error messages at all?
Are you able to post a screen shot of your configuration page? If you are unsure how to do this please reference the How to take and post a screenshot on HP Support Forum post by @Daniel_Potyrala
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Cannot enable ePrint/Web Services, HP LaserJet CP1525nw

I am trying to follow HP's instructions for enabling ePrint and Web Services for my LaserJet CP1525nw. I printed the Config Report, got the printer's IP address and entered it into a brower as instructed. It does pull up summary page, but there is no "HP Web Services" tab as indicated in all of the HP instructions I can find - only four tabs that read: Status, System, Print, Networking.
I have looked at all sub-menus under each of these tabs, and cannot find anything that even resembles a "Web Services" option.
Can somebody please help? Or is there another way to find the printer's email address so that I can register and use ePrint for my iPhone and iPad?
From what I have been able to find on HP Support, the Airprint software driver(s) are not yet availble for this LaserJet model - or are they?

There is firmware to enable AirPrint in the HP LaserJet CP1525nw.
Go to the support page for this printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=40529...
and pick the type of desktop computer you are using. On the resulting page you will see a choice to download a firmware updated that you can run on your computer to update your printer.

Sending audio files through web service

Hi,
How can we send audio (mp3,wmv) files through web services ? i have tried making a byte array of the file and then sending the byte array through the web service, but it give OutOfMemory error. so is there any better and practical way of doing it ?

Just read catalina.bat and find where $JAVA command is called, for NT it should be "%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% "
"%_EXECJAVA% is java
%JAVA_OPTS% and %CATALINA_OPTS% are enviroment parameter for java command. Just added one of them in your case.
By the way, " i am using a HP PDA on the client side, so i cannot increase the JVM heap size there", you should info. the client, otherwise the client may be get "out of memory".

How to connect a PDF form to SQL server database through web service?

Hi,
I'm new to LiveCycle designer. I have designed a PDF form in LC designer ES2, which suppose to take a personnel number and retrieve the personnel information from a SQL server database. Currently its working fine with XML data and a search button, but I need to securly connect to a database through web service. I know how to connect to a wsdl file through designer. What I need is a wsdl file to connect the form to database. For this purpose, is there any WSDL code to use as the web service?
I really appreciate your help and advice.

Hi,
I'm new to LiveCycle designer. I have designed a PDF form in LC designer ES2, which suppose to take a personnel number and retrieve the personnel information from a SQL server database. Currently its working fine with XML data and a search button, but I need to securly connect to a database through web service. I know how to connect to a wsdl file through designer. What I need is a wsdl file to connect the form to database. For this purpose, is there any WSDL code to use as the web service?
I really appreciate your help and advice.

Invalid element RenderOptionsSpec - CB error while calling Output Service through web service

Hi,
      I am trying to call generatePDFOutput from Output Service through web service.
I have generated the proxy class using RAD webservice client option by http://10.235.0.232:8080/soap/services/OutputService?wsdl
here is my code
OutputServiceServiceLocator outputService =new OutputServiceServiceLocator();URL serviceURL =
new URL("http://10.235.0.232:8080/soap/services/OutputService?blob=base64");OutputServiceSoapBindingStub outputClient =
new OutputServiceSoapBindingStub(serviceURL, outputService);
((javax.xml.rpc.Stub) outputClient)._setProperty(javax.xml.rpc.Stub.
USERNAME_PROPERTY,DSC_CREDENTIAL_USERNAME);((javax.xml.rpc.Stub) outputClient)._setProperty(javax.xml.rpc.Stub.
PASSWORD_PROPERTY,DSC_CREDENTIAL_PASSWORD);
//Reference XML data to merge into the PDF document
BLOB inData =new BLOB();inData.setBinaryData("Input xml in bytes");
formName =
"/AdobePOC/Forms/sample.xdp";
//Set PDF run-time options
PDFOutputOptionsSpec pdfOptions =new PDFOutputOptionsSpec();pdfOptions.setFileURI(
"repository://");
RenderOptionsSpec renderOptions =
new RenderOptionsSpec();renderOptions.setCacheEnabled(
true);
BLOBHolder generatePDFOutputPDFDoc =
new BLOBHolder();BLOBHolder generatePDFOutputMetaDataDoc =
new BLOBHolder();BLOBHolder generatePDFOutputResultDoc =
new BLOBHolder();OutputResultHolder outResultHolder =
new OutputResultHolder();
//Create a PDF Document
outputClient.generatePDFOutput(TransformationFormat.PDFA, formName,"repository://", pdfOptions, renderOptions,inData, generatePDFOutputPDFDoc,generatePDFOutputMetaDataDoc, generatePDFOutputResultDoc,outResultHolder);
return generatePDFOutputResultDoc.value;
I am getting the following error while executing the above code.
09 17:05:05:407 IST] 00000028 SystemErr R AxisFault
  faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userExceptionfaultSubcode:
faultString:
org.xml.sax.SAXException: Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CBfaultActor:
faultNode:faultDetail:
{}faultData:<ns1:exception xmlns:ns1="http://adobe.com/idp/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/><ns2:message xmlns:ns2="http://adobe.com/idp/services">Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CB</ns2:message>
{http://xml.apache.org/axis/}hostname:A1AIGMD02018
[6/25/09 17:05:05:407 IST] 00000028 SystemErr R org.xml.sax.SAXException: Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CB[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.createFault(
SOAPFaultBuilder.java:222)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.endElement(
SOAPFaultBuilder.java:129)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.encoding.DeserializationContext.endElement(
DeserializationContext.java:1087)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch( Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.jaxp.SAXParserImpl.parse(Unknown Source)
[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.encoding.DeserializationContext.parse(
DeserializationContext.java:227)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.SOAPPart.getAsSOAPEnvelope(
SOAPPart.java:696)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.Message.getSOAPEnvelope(
Message.java:435)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(
MustUnderstandChecker.java:62)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.AxisClient.invoke(
AxisClient.java:206)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invokeEngine(
Call.java:2784)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:2767)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:2443)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:2366)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:1812)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.adobe.idp.services.OutputServiceSoapBindingStub.generatePDFOutput(
OutputServiceSoapBindingStub.java:579)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.adobe.idp.services.WebOutputService.call(
WebOutputService.java:70)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.webService.controller.ServiceCallThroWebService.call(
ServiceCallThroWebService.java:13)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.webService.controller.WebServiceHandler.perform(
WebServiceHandler.java:92)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.processActionPerform(
ActionServlet.java:1787)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.process(
ActionServlet.java:1586)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.doGet(
ActionServlet.java:492)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.publishing.controller.PubServlet.doGet(
PubServlet.java:42)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at javax.servlet.http.HttpServlet.service(
HttpServlet.java:743)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at javax.servlet.http.HttpServlet.service(
HttpServlet.java:856)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(
ServletWrapper.java:966)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(
ServletWrapper.java:478)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(
ServletWrapper.java:463)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(
WebApp.java:3129)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(
WebGroup.java:238)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(
WebContainer.java:811)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(
WebContainer.java:1433)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(
WCChannelLink.java:93)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(
HttpInboundLink.java:465)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(
HttpInboundLink.java:394)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(
HttpICLReadCallback.java:102)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(
AioReadCompletionListener.java:152)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(
AbstractAsyncFuture.java:213)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(
AbstractAsyncFuture.java:195)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AsyncFuture.completed(
AsyncFuture.java:136)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler.complete(
ResultHandler.java:194)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop(
ResultHandler.java:741)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler$2.run(
ResultHandler.java:863)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(
ThreadPool.java:1510)
Please help me to fix this error.
Thanks in advance
Lavanya.

Hodmi, Thanks for your reply.
If i set RenderOptionsSpec values its not throwing Invalid element RenderOptionsSpec - CB error but its throwing ALC-DSC-000-000 internal error
[6/26/09 17:11:35:021 IST] 00000029 SystemErr R AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userExceptionfaultSubcode:
faultString:
com.adobe.livecycle.output.exception.OutputException: ALC-DSC-000-000: com.adobe.idp.dsc.DSCException: Internal error.faultActor:
faultNode:faultDetail:
{}faultData:<ns1:result xmlns:ns1="http://adobe.com/idp/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
{http://xml.apache.org/axis/}hostname:A1AIGMD01299
[6/26/09 17:11:35:021 IST] 00000029 SystemErr R
com.adobe.livecycle.output.exception.OutputException: ALC-DSC-000-000: com.adobe.idp.dsc.DSCException: Internal error.[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.createFault(
SOAPFaultBuilder.java:222)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.endElement(
SOAPFaultBuilder.java:129)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.encoding.DeserializationContext.endElement(
DeserializationContext.java:1087)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch( Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.jaxp.SAXParserImpl.parse(Unknown Source)
[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.encoding.DeserializationContext.parse(
DeserializationContext.java:227)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.SOAPPart.getAsSOAPEnvelope(
SOAPPart.java:696)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.Message.getSOAPEnvelope(
Message.java:435)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(
MustUnderstandChecker.java:62)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.AxisClient.invoke(
AxisClient.java:206)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invokeEngine(
Call.java:2784)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:2767)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:2443)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:2366)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke(
Call.java:1812)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at com.adobe.idp.services.OutputServiceSoapBindingStub.generatePDFOutput(
OutputServiceSoapBindingStub.java:579)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at com.adobe.idp.services.WebOutputService.call(WebOutputService.java)
[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.aig.dbg.cto.service.webService.controller.WebServiceHandler.perform(
WebServiceHandler.java:76)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.processActionPerform(
ActionServlet.java:1787)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.process(
ActionServlet.java:1586)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.doGet(
ActionServlet.java:492)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.aig.dbg.cto.service.publishing.controller.PubServlet.doGet(
PubServlet.java:42)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at javax.servlet.http.HttpServlet.service(
HttpServlet.java:743)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at javax.servlet.http.HttpServlet.service(
HttpServlet.java:856)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(
ServletWrapper.java:966)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(
ServletWrapper.java:478)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(
ServletWrapper.java:463)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(
WebApp.java:3129)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(
WebGroup.java:238)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(
WebContainer.java:811)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(
WebContainer.java:1433)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(
WCChannelLink.java:93)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(
HttpInboundLink.java:465)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(
HttpInboundLink.java:394)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(
HttpInboundLink.java:274)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(
NewConnectionInitialReadCallback.java:214)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(
NewConnectionInitialReadCallback.java:113)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(
AioReadCompletionListener.java:152)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(
AbstractAsyncFuture.java:213)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(
AbstractAsyncFuture.java:195)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AsyncFuture.completed(
AsyncFuture.java:136)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler.complete(
ResultHandler.java:194)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop(
ResultHandler.java:741)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler$2.run(
ResultHandler.java:863)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(
ThreadPool.java:1510)
Please help me to fix this also.
Thanks in advance
Lavanya.

Exception while accessing web service secure through web services Manager

Hi All,
I deployed sime Hello World web service on JWSDP1.6 and secure it through web service manager(gateway) using Certificate based security.But when I try to access this web service using JWSDP client,I got the following Error while monitoring the soap messages through TCP-Monitor:
/////////////////////////////////Request///////////////////////////////////////////////////////////////
POST /gateway/services/SID0003009 HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml, text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Content-Length: 5631
SOAPAction: ""
User-Agent: Java/1.5.0_05
Host: ivy.cs.ucl.ac.uk:8082
Connection: keep-alive
<?xml version="1.0" encoding="UTF-8"?><env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns0="http://hello.org/wsdl" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><env:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" env:mustUnderstand="1"><xenc:EncryptedKey xmlns:xenc="http://www.w3.org/2001/04/xmlenc#"><xenc:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-1_5"/><ds:KeyInfo xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<wsse:SecurityTokenReference>
<wsse:KeyIdentifier EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509SubjectKeyIdentifier">eN9famBBWzHNUIwWRhMPktcM+VQ=</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
</ds:KeyInfo><xenc:CipherData><xenc:CipherValue>MHjtgA4wOtvI1B+SuRVEmD07yE+jl6axd4XbJ0nvQ3EzSuVVoST9vHzURh+B47yj41187s8T+yjt
Bmpk9OB278Jghonkacv6r+q+LVlxRrQDudNGir7plzFeM6bUadMxf+FLgn5O0a44vU/tvy6V9+zi
yqFdhTvS21No/aW62No=</xenc:CipherValue></xenc:CipherData><xenc:ReferenceList><xenc:DataReference URI="#XWSSGID-1155126003241-1198323932"/></xenc:ReferenceList></xenc:EncryptedKey><wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="XWSSGID-11551260018331598979688">MIIC3TCCAkagAwIBAgIBATANBgkqhkiG9w0BAQQFADBJMQswCQYDVQQGEwJVUzEMMAoGA1UECBMD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=</wsse:BinarySecurityToken><ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#"><ds:SignedInfo><ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"><InclusiveNamespaces xmlns="http://www.w3.org/2001/10/xml-exc-c14n#" PrefixList="wsse enc env ns0 xsd xsi"/></ds:CanonicalizationMethod><ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/><ds:Reference URI="#XWSSGID-1155126002593447652186"><ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/><ds:DigestValue>UJ1kuwI+WuF/RkrQpZrj1GvraLI=</ds:DigestValue></ds:Reference><ds:Reference URI="#XWSSGID-1155126002602761294100"><ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/><ds:DigestValue>sKG/z5OIGgqJ2nw7JtpXyJzr8pY=</ds:DigestValue></ds:Reference></ds:SignedInfo><ds:SignatureValue>SBc65VTG1xpEkRUTz70H0fVGIgoBJ0QnNad0k07RMSfw4vG1WHJdt19R05pO2AvU5aoYuBSaguJe
ZGEjmWzw8mnSWKBi+zeDMeJiwgqwW6HHHX9P7JDslxuTIqoJIVUbSjUTSVz6ww8siIK65quXdkMT
ZzLfp7Cd0gBuA3EEZpg=</ds:SignatureValue><ds:KeyInfo><wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="XWSSGID-11551260025411896275738">
<wsse:Reference URI="#XWSSGID-11551260018331598979688" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
</wsse:SecurityTokenReference></ds:KeyInfo></ds:Signature><wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="XWSSGID-1155126002602761294100"><wsu:Created>2006-08-09T12:20:02Z</wsu:Created><wsu:Expires>2006-08-09T12:20:07Z</wsu:Expires></wsu:Timestamp></wsse:Security></env:Header><env:Body xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="XWSSGID-1155126002593447652186"><xenc:EncryptedData xmlns:xenc="http://www.w3.org/2001/04/xmlenc#" Id="XWSSGID-1155126003241-1198323932" Type="http://www.w3.org/2001/04/xmlenc#Content"><xenc:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc"/><xenc:CipherData><xenc:CipherValue>XNqEzHNp47ILtOagAUNCXYkxOCWv4CjHqmZ7j6VKN/NO96ce4BsNSL6lKzqa9dPxHB1sTVGZQ8KA
COQ6DGwyWCP8ip+CU2hor3uUAml7nzHTx1LUw3Db+0p31VAT3EqKJA3aFy38GQrBTr9ojMOUA6tm
Cj71yucN3UCKRUl3RpE8qU68y7AwNxPsyAZeSa2AVm2cmWvSDZlxgMsx+JCEZaf3+D0o1zMp0Fxb
MSISPt/JrEolt1H5UM1AoFGU4QkckWrQNLPyEF9oxEgZ8oCE5U8v/YJwZIAHFrx67XfaLwQLjzXw
VPigsH9gLkfbP2BU8Vp31GsPwBZtUeNz9S35+CZPD7EiqoAB1QuAxZkJV7n00VChYH+scT64tNja
c81bcD8tf4sAr7toCMNDAU6+74+Qy0EyPqgwLtotDxErn4kF8e72cONMMQBQ91tQs+iI+D6C1I6+
f9UiSfgtm/MTuKQK1CRqarEtI9N6lpqVH8k7ulUwH/jFstihxmhMJ3aZY+qQgSwSs3pwSSim+e18
eR7dOEq4vG8ivKuGvTDO4sSV2RP/nL/3eXr0y7eM0kMFKwTUA4JqL4Y/l8Bo/rie/ZXkkbF6hwEu
dX1QmB0gf5k=</xenc:CipherValue></xenc:CipherData></xenc:EncryptedData></env:Body></env:Envelope>
////////////////////////////////Response///////////////////////////////////////////////////////////////
HTTP/1.1 100 Continue
Server: Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)
Date: Wed, 09 Aug 2006 12:28:47 GMT
HTTP/1.1 500 Internal Server Error
Date: Wed, 09 Aug 2006 12:28:47 GMT
Server: Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)
Connection: Keep-Alive
Keep-Alive: timeout=15, max=100
Content-Type: text/xml
Transfer-Encoding: chunked
157
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">c</faultcode><faultstring>Step execution failed with an exception</faultstring><detail></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
0
So basically, what I am doing here as follows:
HelloClient(using JWSPD1.6)->gateway(web service manager for securing the web service using message level security through certificate )->helloservice(deployed using JWSDP1.6)
I would appreciate if someone could tell me the cause of this errror.Thanks.
Kashif

time to look into the gateway logs as stated by the fault ..
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">c</faultcode><faultstring>Step execution failed with an exception</faultstring><detail></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
looks like the cipher step might have failed

Transfer DMS attachment through Web Services

Hi Everyone,
Is it Possible to transfer DMS attachments to Third party system through Web Services. Could you please tell me the procedure or guide me with some examples.
Thanks
Shailaja

Hi
Check this Blog
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/encodingBASE64in+ABAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/decodingBASE64in+ABAP
Regards
Pavan

How to show stock price through web services for a company?

to get best performance.. what is the best way to show stock price through web services for a company on an office 365 site?

Hi,
you can also do like this.
Create a page using sharepoint designer. upload it in sharePoint.
https://support.office.com/en-in/article/Create-SharePoint-site-pages-0ee31678-ee55-40cd-9f48-ea8700035dbd
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer
this is not the proper answer.. question was different.

Siebel Integration with Adobe LiveCycle through Web Services

I am new to Adobe LiveCycle and I have very little knowledge in Adobe LiveCycle. What we are planning is to send a PDF from Siebel to Adobe LiveCycle and that should extract the data from PDF and return the data back to Siebel. I think this can be done through Web Services. If anyone has any idea, kindly let me know.
thanks

I am not sure why you need to send a PDF form from Siebel to a LiveCycle ES server-side process, to have LiveCycle send data back to Siebel, when the data came from Siebel in the first place. It is more typical that applications send data to LiveCycle to have the data merged with a form template to render PDF.
Regardless, there are a variety of solutions depending upon your solution requirements, business requirements, infrastructure, client-server preferences, security requirements, etcetera, to do what you are seeking. LiveCycle ES processes expose endpoints to consume data from a variety of protocols and formats, including SOAP, EJB (RMI), email, LiveCycle remoting (for Flex clients), and watched folders.
A solution could be as simple as dropping an XDP-based PDF into a network folder, the PDF would be consumed by LiveCycle, a process extracts the data from the PDF, and a Web Service pushes the data back to Siebel.
Steve

Acess MDM data through Web service

Hi All,
Business requirement is to retriev data from the MDM through web service.. How can we do it? Do we have any step by step documentation?
They want to retrive data based on service funtionality.. suppose say based on there system they want to see all the data imported on a particular date.. They want to go with java..
Thanks
Rajeev

Heyy
if you want to retrive the data based on service, as per my understanding you should go by webdynpro component
you can refer the below link.
http://www.sdn.sap.com/irj/sdn/nw-masterdatamanagement?rid=/library/uuid/600333e0-9bf7-2c10-1f99-bf5dcf661949
provide me your email id, so i can send you a good step by step doc on how to create MDM webservice to access MDM Data.
Rgds
Deep

Customer creation through Web service portal in ECC

Hi All,
We have a requirement where we have to Create/ Change Customers (Tcode XD01/ XD02) in ECC through Web service portal linked with RFCu2019s.
1.      There is standard FM for this SD_CUSTOMER_MAINTAIN_ALL, But SAP standard functionality/ notes recommend not to use this FM for such requirements.
2.      Since we have periodic configuration changes for Customers, The option for using BDCu2019s is also ruled out.
3.      Since we have to do the error handling and reporting back to web service portal end as well, Using IDocu2019s also looks tricky at this moment.
Please suggest ways to accomplish this. Any input is welcomed.
Thank you.

Hi,
SD_CUSTOMER_MAINTAIN_ALL is used in standard during the maintenance of a consumer using the standard customer master data transaction XD01 & XD02.
It is not intended to be used out of the transaction and in no case it should be used out of its original context. Due to the specificity of the function module, out of the original context we may face limitations and data inconsistencies.
This is precisely what you will face in your case.
For the maintenance of customers, there is NO BAPI and NO direct function module.
There are some functions modules like the one above where the name is looking nice. But these should not be used.
Below ECC 2005 (6.00), the only solution was batch input and DEBMAS idocs. See [note 384462|https://service.sap.com/sap/support/notes/384462]
Starting with ECC 2005 (6.00) and above: a synchronisation tool has been introduce. See class CMD_EI_API and VMD_EI_API
Hope this helps
BR
Alain

Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

I have a HP laptop running Windows 7 Professional 64 bit. We just changed over to Comcast internet service from AT&T where my HP LaserJet 1102W was set up for ePrint. After several hours, I was finally able to add the 1102W printer to the Comcast network, access the Embedded Web Server tool and print wirelessly but I cannot set up ePrint. I have deleted the printer but cannot get it to connect to Web Services. I keep on getting: Connection Error. Check Internet Connection but again, I can print wirelessly successfully to the printer but would like to be able to set it back up for ePrint. My Comcast router is an Arris TG862.
I have updated the firmware and used the HP Print and Scan Doctor tool but still am not able to get the ePrint Web Services to connect. Here is the information from the Networking page of the EWS:
IPv4 Configuration
Warning: A change in the IP Address will result in loss of connectivity to the browser.
IP Configured By: DHCP
Host Name: NPIC968F8
Domain Name: hsd1.tn.comcast.net.
IP Address Configuration
X Automatic IP Manual IP
X DHCP
BootP
X AutoIP
Manual IP Address:10.0.0.89
IP Subnet Mask: 255.255.255.0
Manual Default Gateway: 10.0.0.0
DNS Address Configuration
Preferred DNS Address: 75.75.75.75
Alternate DNS Address: 75.75.76.76
WINS Address Configuration
X Automatic WINS Server
Manual WINS Server
Manual Preferred WINS Server: 0.0.0.0
Here is my ipconfig information:
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : hsd1.tn.comcast.net.
   Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1000
   Physical Address. . . . . . . . . : 8C-A9-82-A3-F9-5E
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::c57:eb2b:5144:2ea5%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, March 29, 2013 1:24:52 PM
   Lease Expires . . . . . . . . . . : Saturday, April 06, 2013 11:09:24 AM
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCP Server . . . . . . . . . . . : 10.0.0.1
   DHCPv6 IAID . . . . . . . . . . . : 378317186
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-CE-4E-8C-10-1F-74-11-22-71
   DNS Servers . . . . . . . . . . . : 75.75.75.75
                                       75.75.76.76
   NetBIOS over Tcpip. . . . . . . . : Enabled
There appears to be a known issue with the Arris TG862 router and supposedly a new firmware is to be released soon but just checking to see if anyone has been able to resolve this issue.
Thank you!

Hi Surf1981,
I understand that you're not able to enable web services on your printer. I would try steps listed below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

Cannot enable web services on CM1415fnw MFP

I am unable to Enable web services on my printer either via the printer or the HP web services button when opened via the IP address on a computer.
I have looked at many of the solutions on the HP support and on the forum and nothing works for me. I have upgraded the firmware to the latest version -20120216. I have uninstalled/reinstalled the printer software on the PC disconnected and re-connected the wirelesss connection to the router. switchwed off the printer and the router and left them to discharge any held information and I have checked and set the IP address manually. The printer is connected to the router ( Netgear WNDR330) and appears as a connected device on it. It is visible and avbailable on the network and all computers on the network can see and print with it My phone and tablet all connect to the internet without problem via the router but not the printer.
Anybody got any solution? I am going crazy and have run out of thgings to try

Hi lpihome; sorry to learn that you are having this issue;
If you are using win xp or later try this tool GO HERE
Another thing I will try is to disable all security applications including Win Firewall and try again to see if any of them is blocking a process. Make sure that ports 5222, 5223 443 and 80 are open and allowed. Are you using Google public DNS server this server have helped some members to fix several connectivity issues.
Follow this article Go here and let me know if it helps if it does not I will do my best to help you;
RobertoR
Remember...
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

Can't setup ePrint and Web Services on my New HP Officejet Pro 8600!

I just purchased a new HP Officejet Pro 8600. I setup the printer following the setup wizard: my home wireless network work perfectly and the printer prints great. I am now trying to setup ePrint but I get the following error:
"Cannot connect to the server.
Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer. If your network requires a proxy server address to connect to Internet, click Enter Proxy or check your browser settings."
I don't use any server proxy and my OS System is Windows 7 64 bit.
Someone can help me?

I just went through this a few days ago. I had changed internet service providers and thus had a new router. My hpconnected migrated from hpeprint andkept saying it was not connected to the network and hpconnected status kept saying 'offline'
This totally worked:
on hpconnected.com remove your device
on your printer or from hp printer software on your system 'remove web services'
readd webservices, your printer will print the new information with the claim code
add your device back to hpconnected with the new claim code
and wah lah....you are connected to your network through webservices
you will need to create a new hpeprint email as a result
PS on the set up when it asks for Proxy Settings and you have ATT Uverse these do not exist so just leave the areas blank

Cannot enable eprint through Web Services on my mfp m127fn

Similar Messages

Maybe you are looking for