Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

I have a HP laptop running Windows 7 Professional 64 bit. We just changed over to Comcast internet service from AT&T where my HP LaserJet 1102W was set up for ePrint. After several hours, I was finally able to add the 1102W printer to the Comcast network, access the Embedded Web Server tool and print wirelessly but I cannot set up ePrint. I have deleted the printer but cannot get it to connect to Web Services. I keep on getting: Connection Error. Check Internet Connection but again, I can print wirelessly successfully to the printer but would like to be able to set it back up for ePrint. My Comcast router is an Arris TG862.
I have updated the firmware and used the HP Print and Scan Doctor tool but still am not able to get the ePrint Web Services to connect. Here is the information from the Networking page of the EWS:
IPv4 Configuration
Warning: A change in the IP Address will result in loss of connectivity to the browser.
IP Configured By: DHCP
Host Name: NPIC968F8
Domain Name: hsd1.tn.comcast.net.
IP Address Configuration
X Automatic IP Manual IP
X DHCP
BootP
X AutoIP
Manual IP Address:10.0.0.89
IP Subnet Mask: 255.255.255.0
Manual Default Gateway: 10.0.0.0
DNS Address Configuration
Preferred DNS Address: 75.75.75.75
Alternate DNS Address: 75.75.76.76
WINS Address Configuration
X Automatic WINS Server
Manual WINS Server
Manual Preferred WINS Server: 0.0.0.0
Here is my ipconfig information:
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : hsd1.tn.comcast.net.
   Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1000
   Physical Address. . . . . . . . . : 8C-A9-82-A3-F9-5E
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::c57:eb2b:5144:2ea5%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, March 29, 2013 1:24:52 PM
   Lease Expires . . . . . . . . . . : Saturday, April 06, 2013 11:09:24 AM
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCP Server . . . . . . . . . . . : 10.0.0.1
   DHCPv6 IAID . . . . . . . . . . . : 378317186
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-CE-4E-8C-10-1F-74-11-22-71
   DNS Servers . . . . . . . . . . . : 75.75.75.75
                                       75.75.76.76
   NetBIOS over Tcpip. . . . . . . . : Enabled
There appears to be a known issue with the Arris TG862 router and supposedly a new firmware is to be released soon but just checking to see if anyone has been able to resolve this issue.
Thank you!

Hi Surf1981,
I understand that you're not able to enable web services on your printer. I would try steps listed below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

Similar Messages

When trying to initiate Web Services getting server connection error

HP PhotoSmart 5510, 6510 and 7510 all get Server Connection Error when trying to do the initial Web Services setup. I connected with no problem to my wireless router and have received an ip address but all three printer give me the same error when trying to set up web services. Any insight would be appreciated.

Hello cdecicco,
I answered a post with similar issues where someone was unable to connect to Web Services on their printer. Here is the link:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/ePrint-3070A/m-p/1250295#M15308
Let me know if this helps or you need more assistance.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Cannot enable ePrint/Web Services, HP LaserJet CP1525nw

I am trying to follow HP's instructions for enabling ePrint and Web Services for my LaserJet CP1525nw. I printed the Config Report, got the printer's IP address and entered it into a brower as instructed. It does pull up summary page, but there is no "HP Web Services" tab as indicated in all of the HP instructions I can find - only four tabs that read: Status, System, Print, Networking.
I have looked at all sub-menus under each of these tabs, and cannot find anything that even resembles a "Web Services" option.
Can somebody please help? Or is there another way to find the printer's email address so that I can register and use ePrint for my iPhone and iPad?
From what I have been able to find on HP Support, the Airprint software driver(s) are not yet availble for this LaserJet model - or are they?

There is firmware to enable AirPrint in the HP LaserJet CP1525nw.
Go to the support page for this printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=40529...
and pick the type of desktop computer you are using. On the resulting page you will see a choice to download a firmware updated that you can run on your computer to update your printer.

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot enable HP Web Services: "Connection error. Check Internet connection."

Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
Fedor

Thanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Web Services Setup. Connection error. Check Internet connection.

Hello. I have a HP LaserJet Pro P1102v connected to RT-N66u and I can not configure eprint.
Screenshot
What am I doing wrong?

Hi Alex8lf,
Welcome to the HP Support Forums. I understand that you are unable to enable the Web Services for your Laserjet P1102w printer.
To enable the web services for your printer the printer needs to be up-to-date with the firmware. I have included a document with the steps to check your firmware version and if needed, how to update the firmware. Once the firmware is up-to-date, you can enable the web services and set up the ePrint.
I have included a document with steps for setting up ePrint and customizing the ePrint email address. Please create your account on eprintcenter.com unless you live in the USA or the UK, then please create your account at hpconnected.com.
Getting the Latest Firmware and Product Updates
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03128524
Setting Up a Custom Email Address for ePrint
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02940150
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cant enable ePrint web services for Color LaserJet M551

Hi,
I've read all posts in this forum about the ePrint web services enabling issue and tried out all suggestions with no luck.
Here is the situation:
The printer works fine locally. I can print without problem.
The printer is wired.
All ports in my router are open for outbound connections, including UDP.
Using communication logs in my router I can see that the printer can resolve the DNS-names using either my ISP DNS-server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows "registration-pro-site1print.houston.hp.com" resolves to 15.240.60.111 and "registration-pro-site2print.houston.hp.com" resolves to 15.201.224.79.
This indicates that the printer can indeed resolve the addresses. The logs also reveils that the printer communicates with the servers (connection established and data transferred) over https (probably the web service) but still after some minutes the enabling process times out.
I've tried this enabling procedure for several days now so my believe is that the registration servers should have worked some time during that period.
I'm frustrated
....even more frustrated
what am I doing wrong?
Please help !!
trying to setup eprint for my brand new LaserJet Color M551dn and it fails with the
This question was solved.
View Solution.

For whom out there having the same problem as I had. As HP couldn't help me out I restored factory settings and reconfigured everything and voilá, suddenly the printer managed to enable web services and print out the print code.
Good luck to you facing the same problem !!
/MrQQ

Web Services problem - Server connection error

Hi everybody.
When i try to enable the Web Services i get an error. I am connected to the internet (WiFi) and the connection is ok.
The error is the following:
Server Connection Error
The printer was unable to connect to the server. Check the internet connection and try again, or enter a proxy address.
I do not have a proxy, and the internet connection is ok! Why do i get this problem?
Thank you very much.
This question was solved.
View Solution.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank. <<< The DNS could be your problem. If this does not work, try Google's DNS 8.8.8.8
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Getting internet connection error with Photoshop Elements 12

I have recently downloaded and installed Elements 12 on my windows 8 PC. When I try to open any image with Photoshop Elements 12 Editor, I am asked to Sign In. However, when I click on Sign In button, I get internet connection errror though I am connected to internet. At the same time, other apps on my PC are able to access internet.

Check to be sure that PSE is allowed through the firewall. Incidentally, you need to stay signed in once you get it connected. That's the PSE 12 equivalent of activation and signing out will deactivate your computer.

I cannot enable my web service

HP photosmart estation 510 Windows 7 64-bit
This question was solved.
View Solution.

I could not get the Zeen to turn on so I held the 2 volume buttons and the start button and it erased everything now I cannot get past the set up wireless screen

Help! Getting "Connection error Check connection" when trying to enable HP Web Services on M1536DNF

Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.

Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Getting a "Connection Error" when uploading

Im trying to post my training program on the web but getting a "Connection error". Seems only the video portion is not working but all the rest works. In one instance I posted to Weebly server and in a second case I posted to a folder on another server. The second one could not upload the XML files and Im wondering if that is the issue? Not sure about Weebly but it could be the same issue. Im wanting to post my training program to my personal web site. Does anyone know precisely how to do this to eliminate the connection error? Thanks

Hi Sandy,
Based on my research, the error always caused by the package runs with 64bitruntime.
To fix this issue, there are two scenarios:
If you execute the package in SQL Server Data Tool, we should change the Run64BitRuntime property of project that contains the package from True to False.
If you execute the package in SQL Agent Job, as Visakh and Pradyothana suggest, we should enable Use 32 bit runtime option under Execution options pane.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

HP Web Services keeps returning a no internet connection error. HP1025nw

I am trying to setup the eprint service to work on my printer. When I try to enable web-service on my printer, it returns an error message saying, there is no internet connection.
I have updated the firmware as specified thru eprnt support, and still the same error.

Hi @wokst2,
Welcome to the HP Support Forums. I see that you are getting a connection error message when trying to enable the web services on your Laserjet CP1025nw printer.
Please set a static IP and manual DNS servers for the printer. The steps can be found in the Printer Does Not Maintain Wireless Connection document. For the DNS servers please use 8.8.8.8 for the Manual DNS Sever and 8.8.4.4 for the Alternate Preferred DNS Server. These are Google’s DNS servers.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

"Cannot log into Web service" error when tying to use Wifi to connect to Google Drive or Facebook

We have a relatively new Canon Powershot s120. Up until a few days ago, it worked just fine to connect to the Wifi and upload pictures to both Google Drive and Facebook. Now, every time I try to connect, I get a message "Cannot log into Web service"
I have already tried removing Google Drive from the Camera and re-adding it. I went into the Canon Image Gateway website and disconnected and then reconnected the service. That didn't do anything.
Would really appreciate any tips anyone has.
Thanks!

Problem sorted - there is a new set of terms and conditions which came out on the 6th August.
You have to log in under your current user name & password and agree to them and it works again. I spent a frustrating hour doiung this until I found out that this had happened!

Enabling Usage Rights for Web Service and Database connectivity

We are looking for code that allows us to enable web service and database connectivity rights into a form. We are using LiveCycle Forms 7.2 to render the XDP and merge data. Because we are merging data into the form, it has to be reader enabled through the code everytime it is presented to the user in our application.
usageRights[0] = com.adobe.document.pdf.DOCUMENT_SAVE.value;
usageRights[1] = com.adobe.document.pdf.FORM_FILL_IN.value;
usageRights[2] = com.adobe.document.pdf.FORM_EXPORT.value;
usageRights[3] = com.adobe.document.pdf.FORM_IMPORT.value;
usageRights[4] = com.adobe.document.pdf.FORM_ONLINE.value;
Anyone's help would be greatly appreciated

This topic was cross posted. See responses here:
http://forums.adobe.com/message/2111421#2111421

Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

Similar Messages

Maybe you are looking for