Cannot Erase Macbook HDD (Resource problem)

Going to switch on my Macbook this evening, I found it hanging at the Apple Logo. This being familiar from my recent iMac problems I booted from the Leopard install disc, ran Disk Utility and discovered "node errors"
Not to worry, I'd just backed up, so could restore from the Time Capsule. Checking that the archive existed I proceeded to select "Restore" from the Leopard DVD. Failed on Erase.
Restarting I tried to erase using Disk Utility. Input/Output error.
Booting as a firewire Target Disk got a different error when trying to erase. Resource Unavailable.
I've tried rebooting, erasing, repartitioning. Every time is either "Input/Output" error or "Resource" error.
Any help?

I've just run a few tests on my machine. I've been getting similar errors to yours using the hardware test. I've done some digging and I agree- probably bad memory.
I just picked up a 4gig upgrade (less than two weeks ago)- patriot memory from Fry's.
I ran the first few tests with this memory installed and that's when I get the errors similar to yours. When I pulled the memory and installed the RAM my MBP came with I get "no trouble found" on both the standard and the extended test. I guess I should have seen the trouble sooner when the new RAM didn't seem make a difference.
I'll probably take it the local Apple Store, but I think it's safe to say it's the RAM that's causing the issues.

Similar Messages

  • Cannot erase Macbook Air SSD

    Hi,
    I'm having a Macbook Air with 128GB SSD and 4GB RAM with OS X Mavericks. I was using my Mac normally but suddenly chrome got stuck. So I held down the power button and shut down the Mac. When I switched my Mac on again, it wont start.
    I tried to repair my SSD using diskutility from Recovery Partition. But it says something is wrong with my Partition Map and that I have to erase and reinstall OS X. But I cannot erase my SSD. The progress bar gets stuck at 50%.
    When I used command line diskutil eraseDisk, it shows Waiting for disks to reappear and is stuck at 50%.
    Is it a problem with my SSD. If yes, will I be eligible for Warranty?

    Is this MBA functional?  Will it boot to an OSX?
    You may try OPTION+COMMAND+R which would install the original OSX.
    You could get an appropriate enclosure for the SSD and connect it to a working Mac and erase it that way.
    Ciao.

  • I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?

    I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?
    I got the macbook from a friend a few years ago and it already had OSX Lion installed. Whenever it boots from the Snow Leopard disc it says it cannot install from disc. Is there anythingI can do or should I take it to an Apple store to get them to boot OSX Lion for me?

    Insert your Snow Leopard disc and restart, press and hold the C key as soon as you hearthe startup chime, hold C until you see the Apple Logo. When your computer starts up you'll be at the first install screen, choose your language and click the arrow to go to the next screen. This screen has a menu bar, from the Utilities menu select Disk Utility, select your hard drive, this is the one with the manufacturers name or numbers, click the partition tab and then delete any existing partitions by selecting them and clicking the minus. In the drop down box select one partition and click apply. Name your hard drive and click erase. When it's done quit DU and go back to the installer, install Snow Leopard. When the installer is done and the computer is back up and running run Software Update to get to 10.6.8

  • What is the best way to recycle 2010 MacBook? Also, it is completely dead and cannot erase hard drive.

    What is the best way to recycle old 2010 MacBook?  Also, it is completely dead and I cannot erase hard drive.

    Depending on where you are located, country, region, etc, you may have options should
    you wish to have it professionally restored or repaired to function properly again...
    Even an Apple Store with Genius bar could, in several locations, give the product a look
    and perhaps be able to diagnose the underlying issues. However that varies with the
    degree of failed components and what is really wrong with it. A battery and a new HDD
    could be all that's wrong with it. A diagnostic is often free, even on out-of-warranty Mac
    at the Apple Store genius bar; an appointment is advised.
    However if you only wanted someone to extract the hard disk drive and attach it to
    a 'universal USB drive adapter kit' so at to try and access any readable files on it,
    that is something that could be done at an Apple Authorized service provider; as
    some of them may even have a section of resale products such as this adapter kit.
    An example of this kind of kit includes wires, adapter parts, & a separate power supply
    so it can be used to run the hard drive's electronics. This is not intended for permanent
    use, but works like a set of patch cables to access the bare drive without an enclosure.
    https://www.ifixit.com/Store/Mac/Universal-Drive-Adapter/IF107-108-1
    Another kit example says it'd work with almost any HDD or SSD of several build types:
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
    Companies that specialize in restoring Apple portable computers can give you an estimate
    on a repair and the good ones can do that without a fee; they will not start a repair after they
    see the computer until you get the estimate, and approve of the repair. If other items are
    found to be of interest requiring other work or parts, they will also contact you, again before
    continuing. One of these kinds of companies I know about (half a hemisphere away) is in
    the eastern US, and worth inquiring of even if you are overseas. wegenermedia.com.
    While I have no connection with any of these products or service suggestions, they do have
    some variety of good reputation (ifixit.com has DIY repair guides; macsales has parts, etc.)
    in standing, among many Mac users across a section of the planet...
    Any concerns about the data on the hard disk drive should be able to be answered by a
    local Apple independent; they also should have the universal USB drive adapter locally.
    Not sure if I answered your inquiry, but there are different ways of approaching this matter.
    Good luck & happy computing!
    edited

  • I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

    I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

    How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
    If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

  • Hello. I sold a Macbook Pro, and just before i erased my iCloud account. Nonetheless, I still can see it in Find My Phone" page and cannot erase it from there.

    Hello. I sold a Macbook Pro, and just before i erased my iCloud account. Nonetheless, I still can see it in Find My Phone" page and cannot erase it from there.

    Did you unauthorize the machine?
    Maybe some help here:
    http://support.apple.com/kb/index?page=search&src=support_site.home.search_sugge sted.search&locale=en_US&q=unauthorized%20purchases%20on%20my%20accoun
    http://support.apple.com/kb/HT1918
    http://support.apple.com/kb/index?page=search&product=&q=unauthorized%20purchase s%20on%20my%20account&src=support_site.kbase.search.searchresults
    http://support.apple.com/kb/index?page=search&product=&q=unauthorized%20purchase s&src=support_site.kbase.search.searchresults
    http://support.apple.com/kb/PH2613
    http://support.apple.com/kb/index?page=search&product=&q=delete%20icloud%20accou nt&src=support_site.kbase.search.searchresults

  • I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

    I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
    i receive the error 12 This device cannot find enough free resources that it can use. please help

    1. You have placed problem in wrong forum, or use different Windows operating system
    2. Double check your resources, namely in Disk manager. What is free space on HDD?
    Regards
    Milos

  • Cannot erase software program in Windows 7 64--bit

    Greetings to all, I have a Windows 7 64--bit with all the updates on  a W520. I had installed Libre Office 3.5 on May 14,2012. I have wasnted ot upgrade to the latest version and i cannot. I cannot erase the softwarem, the response kthat I get is that all 
    versions must be closed. I had none of the versions open. I can open the program, that is not a problem. I cannot repair it to erase the software. How can I go back to  May 14,2012 ? Thank you Ldxrunner .

    Try starting the computer in Safe Mode. See if you can remove the program while in Safe Mode. Following that, reboot normally.
    http://www.pcworld.com/article/240802/how_to_enable_safe_mode_in_windows_7.html
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

  • Erase MacBook Pro hard disk. How? "Erase Disk" is grayed out.

    I want to use Disk Utility to erase my HDD on MacBook Pro. BUT the Erase disk is greyed out. I checked user account and unlocked the padlock for my Admin account. What next please?

    Remember to press the 'C' key to boot on the Snow Leopard disk (or set the boot disk from Preferences -> Startup disk)...
    Also, if you want to install the OS on an external Hard Disk, format it GUI (check the help for instructions).

  • Java.lang.IllegalStateException: cannot add non-XA Resource to global JTS t

    Hi,
    I am using JCAPS 5.1.2.
    As one of my project requirement I am invoking a jcd from page flow and that jcd uses 2 oracle otd, each oracle otd corresponds to database which resides in two different machines/hosts.
    When jcd is invoked from page flow, i got following error,
    "java.lang.IllegalStateException: cannot add non-XA Resource to global
    JTS transaction."
    [#|2007-07-17T19:13:06.209+0530|SEVERE|IS5.1.2|javax.enterprise.resource.resourceadapter|_ThreadID=17; ThreadName=Worker: 3;stacktrace-id=0;|RAR5029:Unexpected exception while registering component
    java.lang.IllegalStateException: cannot add non-XA Resource to global JTS transaction.
         at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:171)
         at com.sun.enterprise.resource.ResourceManagerImpl.registerResource(ResourceManagerImpl.java:97)
         at com.sun.enterprise.resource.ResourceManagerImpl.enlistResource(ResourceManagerImpl.java:71)
         at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:142)
         at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:202)
         at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:148)
         at com.stc.gjc.spi.DataSource.getConnection(DataSource.java:67)
         at com.stc.connector.oracleadapter.base.SessionImpl.connect(SessionImpl.java:130)
         at com.stc.connector.oracleadapter.OracleSession.open(OracleSession.java:98)
         at com.stc.connector.oracleadapter.OracleConnector.open(OracleConnector.java:90)
         at com.stc.connector.oracleadapter.appconn.OracleApplicationConnection.<init>(OracleApplicationConnection.java:63)
         at com.stc.connector.oracleadapter.appconn.OracleApplicationConnection.<init>(OracleApplicationConnection.java:50)
         at com.stc.connector.oracleadapter.appconn.OracleApplicationConnectionFactory.getConnection(OracleApplicationConnectionFactory.java:133)
         at com.stc.oracle.runtime.ejb.OracleEWayRuntimeHandler.initializeService(OracleEWayRuntimeHandler.java:256)
    Please let me know is there any work around for above problem
    Message was edited by:
    VenkateshSampoornam

    Hi Paul,
    Thanks for your reply. I ddidn't specify XA at page
    flow level.
    But the problem is rectified for me.
    I have two jcds in which one of them connects to two different oracle databases for e.g host A and host B.
    JCD1 connects to host A and host B[ 2 oracle otds]
    JCD2 connects to host B. [single oracle otd]
    I had three external applications for each otd
    In deployment profile, i connected two external applications to single external system for HOST B.
    When i created one more new external system for host b and moved one external application to that.
    After then the problem didn't occur again.
    null

  • Cannot select last delegated resource in Firefox in webcal

    Note: I've already solved this issue, but figured other people might benefit as well.
    Scope
    This problem deals exclusively with WebCal, a service of Apple Lion Server. It is a component of iCal, a service of the Lion Server. When iCal is enabled, it creates a website application in Apache under the location: /webcal.
    Problem
    This problem appears to only exist in Firefox (only tested on version 7.0.1), users cannot select the last resource/location principal in the drop down at the top of the webcal (/webcal). Chrome and Safari did not exhibit this issue. In Firefox, the last element appended to the select tag is automatically selected, thus, the javascript code selecting the correct entry, which appears before the last append, is rendered useless.
    No only that, but the last entry is never selectable, as the DOM already indicates that that element is selected and thus the "change" event never triggers.
    This does NOT refer to calendar selection once you're in a resource. This is about resource selection. This is at the top of the web page, centered and always prefaced with "Calendar for " followed by the delegated principal Full Name
    Solution
    Update the javascript to select the current calendar after the last element is appended to the select element, but before the change event is listened to. The javascript file affected/udpated is located at:
    /usr/share/collabd/coreclient/public/javascripts/calendar/calaccess.js
    on your Lion Server. Changes start around line 1285.
    Here's my updated file
    starting at line 1279:
    if ($('calendar_title')) {
            $('calendar_title').down('span').appendChild(Builder.node('span', {className:'popuphandle'}, "\u25BC"));
            $('calendar_title').down('span').appendChild(Builder.node('select', [
                    Builder.node('option', {value:'__'}, '_Calendar.Title.MyCalendar'.loc())
            inAccountsToDelegate.each(function(account) {
                    var optionElm = Builder.node('option', {value:account.principalURL}, account.displayname);
                    if (account.principalURL == principalService().mUserPrincipalURL) {
                            optionElm.selected = true;
                    $('calendar_title').down('select').appendChild(optionElm);
            $('calendar_title').down('select').selectedIndex = 0;
            selectElm = $('calendar_title').down('select');
            $(selectElm).childElements().each(function(optionElm) {
                    if( optionElm.value == principalService().mUserPrincipalURL ) {
                            optionElm.selected = true;
            $('calendar_title').down('select').observe('change', function(inEvent) {
                    if ($F(inEvent.findElement('select')) == '__') {
                            window.location.search = '';
                    else {
                            window.location.search = 'principal='+encodeURIComponent($F(inEvent.findElement('select')));
            }.bindAsEventListener(this));
    Replace the if statement up to, but not including the comment:
    // select the first calendar
    It's the vanilla (as it came with the server) javascript install file with modifications to get Firefox to work with it. Tested in Chrome 15, Firefox 7.0.1, Safari 5.1.2 (OSX 10.7). No warrantees or guarantees are made about this file. Use at your own risk.

    Glad it worked for you. It took me about a day to figure out.
    I've not had issues with delegates. But I've had to use the command-line instead of the GUI as I've needed multiple people as delegates for certain resources (like public calendars with single writers).
    We've had issues with time zones reverting to Pacific, though.

  • Javax.servlet.UnavailableException: Cannot load a validator resource from '

    sorry to interrupt.
    i m using Struts1.1/jsp.
    When i comment out the codes for validation plugin the projects works fine
    but when its on its gives the following Exceptions
    Sep 18, 2008 4:17:07 PM org.apache.catalina.core.AprLifecycleListener lifecycleEvent
    INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre1.5.0_13\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.5.0_15\bin;C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin;C:\Program Files\ant\bin;C:\Program Files\hibernate-3.2\lib;C:\Program Files\hibernate-3.2;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\Apache Group\Tomcat 4.1\bin
    Sep 18, 2008 4:17:07 PM org.apache.coyote.http11.Http11BaseProtocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8080
    Sep 18, 2008 4:17:07 PM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 2219 ms
    Sep 18, 2008 4:17:07 PM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Sep 18, 2008 4:17:07 PM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
    Sep 18, 2008 4:17:07 PM org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.TldConfig).
    log4j:WARN Please initialize the log4j system properly.
    Sep 18, 2008 4:17:12 PM org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
    INFO: Tiles definition factory loaded for module ''.
    Sep 18, 2008 4:17:12 PM org.apache.struts.validator.ValidatorPlugIn initResources
    INFO: Loading validation rules file from '/WEB-INF/validator-rules.xml'
    Sep 18, 2008 4:17:12 PM org.apache.struts.validator.ValidatorPlugIn initResources
    INFO: Loading validation rules file from '/WEB-INF/validation.xml'
    Sep 18, 2008 4:17:33 PM org.apache.struts.validator.ValidatorPlugIn init
    SEVERE: Connection timed out: connect
    java.net.ConnectException: Connection timed out: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(Unknown Source)
    at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
    at java.net.PlainSocketImpl.connect(Unknown Source)
    at java.net.Socket.connect(Unknown Source)
    at java.net.Socket.connect(Unknown Source)
    at sun.net.NetworkClient.doConnect(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.<init>(Unknown Source)
    at sun.net.www.http.HttpClient.New(Unknown Source)
    at sun.net.www.http.HttpClient.New(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at com.sun.org.apache.xerces.internal.impl.XMLEntityManager.setupCurrentEntity(Unknown Source)
    at com.sun.org.apache.xerces.internal.impl.XMLEntityManager.startEntity(Unknown Source)
    at com.sun.org.apache.xerces.internal.impl.XMLEntityManager.startDTDEntity(Unknown Source)
    at com.sun.org.apache.xerces.internal.impl.XMLDTDScannerImpl.setInputSource(Unknown Source)
    at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$DTDDispatcher.dispatch(Unknown Source)
    at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
    at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
    at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
    at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
    at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
    at org.apache.commons.digester.Digester.parse(Digester.java:1567)
    at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:186)
    at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:233)
    at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:164)
    at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
    at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
    at javax.servlet.GenericServlet.init(GenericServlet.java:212)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
    at org.apache.catalina.core.StandardService.start(StandardService.java:448)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
    Sep 18, 2008 4:17:33 PM org.apache.catalina.core.ApplicationContext log
    INFO: Marking servlet strutsController as unavailable
    Sep 18, 2008 4:17:33 PM org.apache.catalina.core.StandardContext loadOnStartup
    SEVERE: Servlet /valid threw load() exception
    javax.servlet.UnavailableException: Cannot load a validator resource from '/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml'
    at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:174)
    at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
    at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
    at javax.servlet.GenericServlet.init(GenericServlet.java:212)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
    at org.apache.catalina.core.StandardService.start(StandardService.java:448)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
    Sep 18, 2008 4:17:34 PM org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
    INFO: Tiles definition factory loaded for module ''.
    Sep 18, 2008 4:17:34 PM org.apache.struts.validator.ValidatorPlugIn initResources
    INFO: Loading validation rules file from '/WEB-INF/validator-rules.xml'
    Sep 18, 2008 4:17:34 PM org.apache.struts.validator.ValidatorPlugIn initResources
    INFO: Loading validation rules file from '/WEB-INF/validation.xml'
    log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester.sax).
    log4j:WARN Please initialize the log4j system properly.
    Sep 18, 2008 4:17:38 PM org.apache.coyote.http11.Http11BaseProtocol start
    INFO: Starting Coyote HTTP/1.1 on http-8080
    Sep 18, 2008 4:17:38 PM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    Sep 18, 2008 4:17:38 PM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/109 config=null
    Sep 18, 2008 4:17:38 PM org.apache.catalina.storeconfig.StoreLoader load
    INFO: Find registry server-registry.xml at classpath resource
    Sep 18, 2008 4:17:38 PM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 31312 ms
    Sep 18, 2008 4:17:42 PM org.apache.struts.tiles.TilesRequestProcessor initDefinitionsMapping
    INFO: Tiles definition factory found for request processor ''.
    [Length is less than1]
    Sep 18, 2008 4:17:42 PM org.apache.struts.validator.ValidatorForm validate
    SEVERE: No such validation method: org.apache.struts.validator.FieldChecks.validateMinLength(java.lang.Object, org.apache.commons.validator.ValidatorAction, org.apache.commons.validator.Field, org.apache.struts.action.ActionErrors, javax.servlet.http.HttpServletRequest)
    org.apache.commons.validator.ValidatorException: No such validation method: org.apache.struts.validator.FieldChecks.validateMinLength(java.lang.Object, org.apache.commons.validator.ValidatorAction, org.apache.commons.validator.Field, org.apache.struts.action.ActionErrors, javax.servlet.http.HttpServletRequest)
    at org.apache.commons.validator.ValidatorAction.loadValidationMethod(ValidatorAction.java:603)
    at org.apache.commons.validator.ValidatorAction.executeValidationMethod(ValidatorAction.java:533)
    at org.apache.commons.validator.Field.validateForRule(Field.java:766)
    at org.apache.commons.validator.Field.validate(Field.java:846)
    at org.apache.commons.validator.Form.validate(Form.java:290)
    at org.apache.commons.validator.Validator.validate(Validator.java:354)
    at org.apache.struts.validator.ValidatorForm.validate(ValidatorForm.java:112)
    at org.apache.struts.action.RequestProcessor.processValidate(RequestProcessor.java:921)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:206)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
    at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
    at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
    at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
    at java.lang.Thread.run(Unknown Source)
    /*********************************************Codes******************************************************/
    my codes are as follows:
    struts-config.xml
    <?xml version="1.0" encoding="ISO-8859-1" ?>
    <!DOCTYPE struts-config PUBLIC
    "-//Apache Software Foundation//DTD Struts Configuration 1.2//EN"
    "http://jakarta.apache.org/struts/dtds/struts-config_1_2.dtd">
    <!--
    This is a blank Struts configuration file with an example
    welcome action/page and other commented sample elements.
    Tiles and the Struts Validator are configured using the factory defaults
    and are ready-to-use.
    NOTE: If you have a generator tool to create the corresponding Java classes
    for you, you could include the details in the "form-bean" declarations.
    Otherwise, you would only define the "form-bean" element itself, with the
    corresponding "name" and "type" attributes, as shown here.
    -->
    <struts-config>
    <form-beans>
    <form-bean name="myform" type="src.Myform">
    <form-property
    name="name"
    type="java.lang.String"/>
    </form-bean>
    </form-beans>
    <global-exceptions/>
    <global-forwards>
    <forward name="welcome" path="/Welcome.do"/>
    </global-forwards>
    <action-mappings>
    <action path="/myAction" type="src.MyAction" name="myform" scope="request" validate="true" input="/index.jsp">
    <forward name="wel" path="/wel.jsp"/>
    </action>
    <!--<action
    path="/AddressJavascriptValidation"
    type="roseindia.net.AddressAction"
    name="AddressForm"
    scope="request"
    validate="true"
    input="/pages/AddressJavascriptValidation.jsp">
    <forward name="success" path="/pages/success.jsp"/>
    </action>-->
    </action-mappings>
    <controller processorClass="org.apache.struts.tiles.TilesRequestProcessor"/>
    <message-resources parameter="resources/application"/>
    <plug-in className="org.apache.struts.tiles.TilesPlugin">
    <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
    <set-property property="moduleAware" value="true"/>
    </plug-in>
    <plug-in className="org.apache.struts.validator.ValidatorPlugIn">
    <set-property property="pathnames" value="/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml"/>
    <set-property property="stopOnFirstError" value="false"/>
    </plug-in>
    </struts-config>
    validation.xml
    <?xml version="1.0" encoding="ISO-8859-1" ?>
    <!DOCTYPE form-validation PUBLIC "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN" "http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">
    <form-validation>
    <formset>
    <!-- <form name="form" >
    <field property="name" depends="required">
    <arg0 key="myform.name"/></field>
    </form>
    -->
    <form name="myform">
    <field property="name" depends="minlength">
    <arg0 key="myform.name"/>
    <arg1 key="${var:minlength}" name="minlength" resource="false"/>
    <var>
    <var-name>minlength</var-name>
    <var-value>2</var-value>
    </var>
    </field>
    </form>
    <!--<form name="AddressForm">
    <field property="name"
    depends="required">
    <arg key="AddressForm.name"/>
    </field>
    <field property="address"
    depends="required">
    <arg key="AddressForm.address"/>
    </field>
    <field property="emailAddress"
    depends="required">
    <arg key="AddressForm.emailAddress"/>
    </field>
    </form>-->
    </formset>
    </form-validation>
    validator-rules.xml
    <?xml version="1.0" encoding="ISO-8859-1" ?>
    <!DOCTYPE form-validation PUBLIC "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN" "http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">
    <!--
    This file contains the default Struts Validator pluggable validator
    definitions. It should be placed somewhere under /WEB-INF and
    referenced in the struts-config.xml under the plug-in element
    for the ValidatorPlugIn.
    <plug-in className="org.apache.struts.validator.ValidatorPlugIn">
    <set-property property="pathnames" value="/WEB-INF/validator-rules.xml,
    /WEB-INF/validation.xml"/>
    </plug-in>
    These are the default error messages associated with
    each validator defined in this file. They should be
    added to your projects ApplicationResources.properties
    file or you can associate new ones by modifying the
    pluggable validators msg attributes in this file.
    # Struts Validator Error Messages
    errors.required={0} is required.
    errors.minlength={0} can not be less than {1} characters.
    errors.maxlength={0} can not be greater than {1} characters.
    errors.invalid={0} is invalid.
    errors.byte={0} must be a byte.
    errors.short={0} must be a short.
    errors.integer={0} must be an integer.
    errors.long={0} must be a long.
    errors.float={0} must be a float.
    errors.double={0} must be a double.
    errors.date={0} is not a date.
    errors.range={0} is not in the range {1} through {2}.
    errors.creditcard={0} is an invalid credit card number.
    errors.email={0} is an invalid e-mail address.
    -->
    <form-validation>
    <global>
    <validator name="required"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateRequired"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    msg="errors.required">
    <javascript><![CDATA[
    function validateRequired(form) {
    var isValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oRequired = new required();
    for (x in oRequired) {
    var field = form[oRequired[x][0]];
    if (field.type == 'text' ||
    field.type == 'textarea' ||
    field.type == 'file' ||
    field.type == 'select-one' ||
    field.type == 'radio' ||
    field.type == 'password') {
    var value = '';
    // get field's value
    if (field.type == "select-one") {
    var si = field.selectedIndex;
    if (si >= 0) {
    value = field.options[si].value;
    } else {
    value = field.value;
    if (trim(value).length == 0) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oRequired[x][1];
    isValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return isValid;
    // Trim whitespace from left and right sides of s.
    function trim(s) {
    return s.replace( /^\s*/, "" ).replace( /\s*$/, "" );
    ]]>
    </javascript>
    </validator>
    <validator name="requiredif"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateRequiredIf"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    org.apache.commons.validator.Validator,
    javax.servlet.http.HttpServletRequest"
    msg="errors.required">
    </validator>
    <validator name="minlength"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateMinLength"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.minlength">
    <javascript><![CDATA[
    function validateMinLength(form) {
    var isValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oMinLength = new minlength();
    for (x in oMinLength) {
    var field = form[oMinLength[x][0]];
    if (field.type == 'text' ||
    field.type == 'textarea') {
    var iMin = parseInt(oMinLength[x][2]("minlength"));
    if ((trim(field.value).length > 0) && (field.value.length < iMin)) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oMinLength[x][1];
    isValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return isValid;
    }]]>
    </javascript>
    </validator>
    <validator name="maxlength"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateMaxLength"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.maxlength">
    <javascript><![CDATA[
    function validateMaxLength(form) {
    var isValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oMaxLength = new maxlength();
    for (x in oMaxLength) {
    var field = form[oMaxLength[x][0]];
    if (field.type == 'text' ||
    field.type == 'textarea') {
    var iMax = parseInt(oMaxLength[x][2]("maxlength"));
    if (field.value.length > iMax) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oMaxLength[x][1];
    isValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return isValid;
    }]]>
    </javascript>
    </validator>
    <validator name="mask"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateMask"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.invalid">
    <javascript><![CDATA[
    function validateMask(form) {
    var isValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oMasked = new mask();
    for (x in oMasked) {
    var field = form[oMasked[x][0]];
    if ((field.type == 'text' ||
    field.type == 'textarea') &&
    (field.value.length > 0)) {
    if (!matchPattern(field.value, oMasked[x][2]("mask"))) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oMasked[x][1];
    isValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return isValid;
    function matchPattern(value, mask) {
    return mask.exec(value);
    }]]>
    </javascript>
    </validator>
    <validator name="byte"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateByte"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.byte"
    jsFunctionName="ByteValidations">
    <javascript><![CDATA[
    function validateByte(form) {
    var bValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oByte = new ByteValidations();
    for (x in oByte) {
    var field = form[oByte[x][0]];
    if (field.type == 'text' ||
    field.type == 'textarea' ||
    field.type == 'select-one' ||
    field.type == 'radio') {
    var value = '';
    // get field's value
    if (field.type == "select-one") {
    var si = field.selectedIndex;
    if (si >= 0) {
    value = field.options[si].value;
    } else {
    value = field.value;
    if (value.length > 0) {
    if (!isAllDigits(value)) {
    bValid = false;
    if (i == 0) {
    focusField = field;
    fields[i++] = oByte[x][1];
    } else {
    var iValue = parseInt(value);
    if (isNaN(iValue) || !(iValue >= -128 && iValue <= 127)) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oByte[x][1];
    bValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return bValid;
    }]]>
    </javascript>
    </validator>
    <validator name="short"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateShort"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.short"
    jsFunctionName="ShortValidations">
    <javascript><![CDATA[
    function validateShort(form) {
    var bValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oShort = new ShortValidations();
    for (x in oShort) {
    var field = form[oShort[x][0]];
    if (field.type == 'text' ||
    field.type == 'textarea' ||
    field.type == 'select-one' ||
    field.type == 'radio') {
    var value = '';
    // get field's value
    if (field.type == "select-one") {
    var si = field.selectedIndex;
    if (si >= 0) {
    value = field.options[si].value;
    } else {
    value = field.value;
    if (value.length > 0) {
    if (!isAllDigits(value)) {
    bValid = false;
    if (i == 0) {
    focusField = field;
    fields[i++] = oShort[x][1];
    } else {
    var iValue = parseInt(value);
    if (isNaN(iValue) || !(iValue >= -32768 && iValue <= 32767)) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oShort[x][1];
    bValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return bValid;
    }]]>
    </javascript>
    </validator>
    <validator name="integer"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateInteger"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.integer"
    jsFunctionName="IntegerValidations">
    <javascript><![CDATA[
    function validateInteger(form) {
    var bValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oInteger = new IntegerValidations();
    for (x in oInteger) {
    var field = form[oInteger[x][0]];
    if (field.type == 'text' ||
    field.type == 'textarea' ||
    field.type == 'select-one' ||
    field.type == 'radio') {
    var value = '';
    // get field's value
    if (field.type == "select-one") {
    var si = field.selectedIndex;
    if (si >= 0) {
    value = field.options[si].value;
    } else {
    value = field.value;
    if (value.length > 0) {
    if (!isAllDigits(value)) {
    bValid = false;
    if (i == 0) {
    focusField = field;
    fields[i++] = oInteger[x][1];
    } else {
    var iValue = parseInt(value);
    if (isNaN(iValue) || !(iValue >= -2147483648 && iValue <= 2147483647)) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oInteger[x][1];
    bValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return bValid;
    function isAllDigits(argvalue) {
    argvalue = argvalue.toString();
    var validChars = "0123456789";
    var startFrom = 0;
    if (argvalue.substring(0, 2) == "0x") {
    validChars = "0123456789abcdefABCDEF";
    startFrom = 2;
    } else if (argvalue.charAt(0) == "0") {
    validChars = "01234567";
    startFrom = 1;
    } else if (argvalue.charAt(0) == "-") {
    startFrom = 1;
    for (var n = startFrom; n < argvalue.length; n++) {
    if (validChars.indexOf(argvalue.substring(n, n+1)) == -1) return false;
    return true;
    }]]>
    </javascript>
    </validator>
    <validator name="long"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateLong"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.long"/>
    <validator name="float"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateFloat"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.float"
    jsFunctionName="FloatValidations">
    <javascript><![CDATA[
    function validateFloat(form) {
    var bValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oFloat = new FloatValidations();
    for (x in oFloat) {
    var field = form[oFloat[x][0]];
    if (field.type == 'text' ||
    field.type == 'textarea' ||
    field.type == 'select-one' ||
    field.type == 'radio') {
    var value = '';
    // get field's value
    if (field.type == "select-one") {
    var si = field.selectedIndex;
    if (si >= 0) {
    value = field.options[si].value;
    } else {
    value = field.value;
    if (value.length > 0) {
    // remove '.' before checking digits
    var tempArray = value.split('.');
    var joinedString= tempArray.join('');
    if (!isAllDigits(joinedString)) {
    bValid = false;
    if (i == 0) {
    focusField = field;
    fields[i++] = oFloat[x][1];
    } else {
    var iValue = parseFloat(value);
    if (isNaN(iValue)) {
    if (i == 0) {
    focusField = field;
    fields[i++] = oFloat[x][1];
    bValid = false;
    if (fields.length > 0) {
    focusField.focus();
    alert(fields.join('\n'));
    return bValid;
    }]]>
    </javascript>
    </validator>
    <validator name="double"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateDouble"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.double"/>
    <validator name="date"
    classname="org.apache.struts.validator.FieldChecks"
    method="validateDate"
    methodParams="java.lang.Object,
    org.apache.commons.validator.ValidatorAction,
    org.apache.commons.validator.Field,
    org.apache.struts.action.ActionErrors,
    javax.servlet.http.HttpServletRequest"
    depends=""
    msg="errors.date"
    jsFunctionName="DateValidations">
    <javascript><![CDATA[
    function validateDate(form) {
    var bValid = true;
    var focusField = null;
    var i = 0;
    var fields = new Array();
    oDate = new DateValidations();
    for (x in oDate) {
    var value = form[oDate[x][0]].value;
    var datePattern = oDate[x][2]("datePatternStrict");
    if ((form[oDate[x][0]].type == 'text' ||
    form[oDate[x][0]].type == 'textarea') &&
    (value.length > 0) &&
    (datePattern.length > 0)) {
    var MONTH = "MM";
    var DAY = "dd";
    var YEAR = "yyyy";
    var orderMonth = datePattern.indexOf(MONTH);
    var orderDay = datePattern.indexOf(DAY);
    var orderYear = datePattern.indexOf(YEAR);
    if ((orderDay < orderYear && orderDay > orderMonth)) {
    var iDelim1 = orderMonth + MONTH.length;
    var iDelim2 = orderDay + DAY.length;
    var delim1 = datePattern.substring(iDelim1, iDelim1 + 1);
    var delim2 = datePattern.substring(iDelim2, iDelim2 + 1);
    if (iDelim1 == orderDay && iDelim2 == orderYear) {
    dateRegexp = new RegExp("^(\\d{2})(\\d{2})(\\d{4})$");
    } else if (iDelim1 == orderDay) {
    dateRegexp = new RegExp("^(\\d{2})(\\d{2})[" + delim2 + "](\\d{4})$");
    } else if (iDelim2 == orderYear) {
    dateRegexp = new RegExp("^(\\d{2})[" + delim1 + "](\\d{2})(\\d{4})$");
    } else {
    dateRegexp = new RegExp("^(\\d{2})[" + delim1 + "](\\d{2})[" + delim2 + "](\\d{4})$");
    var matched = dateRegexp.exec(value);
    if(matched != null) {
    if (!isValidDate(matched[2], matched[1], matched[3])) {
    if (i == 0) {
    focusField = form[oDate[x][0]];
    fields[i++] = oDate[x][1];
    bValid = false;
    } else {
    if (i == 0) {
    focusField = form[oDate[x][0]];
    fields[i++] = oDate[x][1];
    bValid = false;
    } else if ((orderMonth < orderYear && orderMonth > orderDay)) {
    var iDelim1 = orderDay + DAY.length;
    var iDelim2 = orderMonth + MONTH.length;
    var delim1 = datePattern.substring(iDelim1, iDelim1 + 1);
    var delim2 = datePattern.substring(iDelim2, iDelim2 + 1);
    if (iDelim1 == orderMonth && iDelim2 == orderYear) {
    dateRegexp = new RegExp("^(\\d{2})(\\d{2})(\\d{4})$");
    } else if (iDelim1 == orderMonth) {
    dateRegexp = new RegExp("^(\\d{2})(\\d{2})[" + delim2 + "](\\d{4})$");
    } else if (iDelim2 == orderYear) {
    dateRegexp = new RegExp("^(\\d{2})[" + delim1 + "](\\d{2})(\\d{4})$");
    } else {
    dateRegexp = new RegExp("^(\\d{2})[" + delim1 + "](\\d{2})[" + delim2 + "](\\d{4})$");

    Hello,
    thanks for your contribution. But how I already said we have seen that the first error message:
    The error is: javax.servlet.UnavailableException: Cannot load a validator resource from '/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml'
    But behind that message is an additional message that describes the real root cause of the problem:
    SEVERE: Cannot find resource "org/apache/commons/digester/xmlrules/digester-rules.dtd"
    org.apache.commons.digester.xmlrules.XmlLoadException: Cannot find resource
    "org/apache/commons/digester/xmlrules/digester-rules.dtd"
    Unfortunately we have no idea why the dtd file can not be loaded. The appropriate line of code is:
    getClass().getResourceAsStream("<link_to_resource")
    And this returns a NULL object. The NULL object causes the general exception and finishes the instantiation of Struts.
    Any additonal hints?
    Regards, Maik

  • IMac cannot erase partition in recovery mode

    Hi,
    I bought an iMac Retina 5K in Dec. 2014. I am using OS X 10.10.1, 3T fusion drive. Now I want to erase and re-install OS X. However, when I enter the recovery mode, the os does not let me erase the partition. After first attempt of erase, all the selection and button became gray and un-selectable.
    I want do know if it is normal that I cannot erase for the new model. How can I erase and re-install, or restore to factory state.
    Thank you so much!

    I just returned a new iMac with a fusion drive after one week (many power related problems) - I also had a problem erasing, but finally managed by choosing the actual drive, not the top most entry in the Disk Utility window. I no longer have it now to do a screenshot, but I am referring to the actual hard drive like this one:
    As to not being able to choose the top entry - I believe this is the behavior because of the fusion drive/SSD which you have no control over.

  • I cannot switch on the wifi on my iphone 4s. unexspected i suddenly got 3557 unread mail notefication in my inbox folder. my server is clear. i cannot erase them.

    I cannot switch on my wifi on the 4S?
    In ny inbox folder it shows that i got 3557 unread messages. i cannot erase them and my server is empty?
    What must I do?

    The mail problem is fixed.
    I still need help regarding switching wifi on.

  • Cannot erase files in iPhone apps

    In my iPhone 4, there are some files I would like to, but cannot erase, probably because I accidentally placed them in an incompatible App.
    I understand that files belonging to a specific App in iPhone (or my iPad Mini II as a matter of fact) must be erased from within the App itself and not from iTunes.
    Example: there are keynote presentations in Smart Office II, and Smart Office II will allow me to erase only their compatible documents. Accidentally, I gave SOffice some filemaker Go db's, which it couldn't deal with. Yet, I can't cancel them.
    Does there exist some method for canceling files in iPhone 4, when the App where they are located refuses to recognize them for cancellation?

    One thing to do would be to go to Disk Utility and verify permissions and repair if necessary, just in case there is a permissions problem.
    However, it may be that your software has become corrupted. If so, I don't know if there is an easy fix. You might have to do a clean install of your OS. If you decide to do this, be sure and back up all your data in advance.
    Good luck!

Maybe you are looking for

  • Jabber and Gmail Don't Work on my iChat

    Hello! I bought my Mac in August 2009. When I first bought it, gmail and Jabber worked iChat. But shortly after, it stopped working. It hasn't worked since then. Whenever I would try to create a Jabber or Gmail account on iChat, the words Jabber and

  • Image is not loading in my blackberry

    Hi Everyone, We are having trouble with view a large image(3mb) from a mobile website in Blackberry while using 3G and GPRS/EDGE but it works well while using WIFI. Do you have any idea about this? I would appreciate your assistance.

  • Unprotect cells

    Hi all ! How to protect an object in numbers 09 and leave some unprotected cells to write values ? Thanks

  • Javadoc for UDS

    HI all, I am desperately looking for a utility that generates HTML help for UDS/Forte ala Javadoc. There was one several years ago - which I have used then, but I seemed to have lost my last remaining copy. Does anyone still have this? Or maybe know

  • Do not know what is the name of my database

    Hi i am new to SQL JDBC and Oracle and I am trying to establish a connection to a database (it is just some �test one). The problem is that i am not sure what is the URI of the database. I know that in order to establish a connection I need to be abl