Cannot establish a VPN connection in Lion

I have followed the instructions in this support article but cannot create a VPN connection:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/9010.html
I've tried the steps outlined in this article, and successfully completed everything but still cannot create a VPN connection:
http://anders.com/guides/native-cisco-vpn-on-mac-os-x/
I have all the correct credentials for my VPN network (vpn address, group name, shared secret). I always receive a server time out error.
I am able to successfully connect to my work VPN using the Cisco VPNClient. But unfortunately it only runs in 32-bit mode. I prefer to boot in 64-bit mode and would prefer not to reboot everytime I want to establish a VPN connection.
I have been working on this issues for three days straight and am getting nowhere. My work is an unsupported IT environment, and the IT support subscription service we use will not handle any Mac issues.

Hmm, no changes. Still the same issue. I deleted the files described, rebooted and reconfigured the network.
hmm, Finder still remembers his old server connection settings, maybe i should delete those, too. Any idea where finder stores his server connections?
In my perception the message that no secure connection can be established comes up immediately after sending the connect command. I don't think that there is network traffic, there is no noticeable latency...

Similar Messages

Cannot establish a secure connection

I bought a MBP few days ago and then upgraded to Mountain Lion.
When I connect my iphone to my macbook pro,error occurs with this message
"iTunes cannot connect to this iphone.Cannot establish a secure connection to the device."
but iPhoto works well to import my camera photos.
How should i do to establish the conncection because i want to back up my iphone using this notebook.
Thanks!

Hmm, no changes. Still the same issue. I deleted the files described, rebooted and reconfigured the network.
hmm, Finder still remembers his old server connection settings, maybe i should delete those, too. Any idea where finder stores his server connections?
In my perception the message that no secure connection can be established comes up immediately after sending the connect command. I don't think that there is network traffic, there is no noticeable latency...

Why can't I establish a VPN connection using my iPhone 4's personal hotspot?

Hello everybody,
I want to access our company's network with my Mac Book Pro using my iPhone 4's 3G connection, but unfortunately it simply won't work. Here is what I can do:
- I can establish a VPN connection from my MacBook Pro using my home (or some other) WiFi and access the company network.
- I can establish a VPN connection on my iPhone 4 using 3G and access the company network on my iPhone 4.
- I can use my iPhone 4's personal hotspot (sharing its 3G connection) with my MacBook Pro and surf the Web.
what I can't do is:
- establish a VPN connection on my MacBook Pro when connected to the internet via the iPhone's personal hotspot. (connection times out)
- access the company's network on my MacBook Pro using the personal hotspot, when the iPhone's VPN connection is ON.
The VPN is an encrypted PPTP connection, with username and password.
Is this a known issue, and, if so, is there any way to solve this?
Thanks in advance!
Cheers
Diego

what i forgot:
i'm connecting to the iPhone's hotspot using WiFi
and:
the answer provided here did not do the trick for me :/
https://discussions.apple.com/message/17729456#17729456

I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it?

I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it? OS 10.8.3, Safari 6.0.4

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Error message cannot establish a secure connection ipad3

I'm trying to login into an IP camera via safari on the ipad3 and receive an error message " Safari cannot open page because it could not establish a secure connection to the server." I have made the same connection to the same IP camera on my Ipad2 without any problems or errors. As a matter of fact, I'm connected to ip camera on my IPad 2 as I type using the same wifi connection used with the IPad 3. Any suggestions? Thanks in advance!

Hmm, no changes. Still the same issue. I deleted the files described, rebooted and reconfigured the network.
hmm, Finder still remembers his old server connection settings, maybe i should delete those, too. Any idea where finder stores his server connections?
In my perception the message that no secure connection can be established comes up immediately after sending the connect command. I don't think that there is network traffic, there is no noticeable latency...

I am unable to establish a VPN connection. My certificates are installed, but I receive error : ssl_error_bad_mac_read

After installing SSL Certificates into the browser, I attempt to load the site and receive the following error: ssl_error_bad_mac_read

greg85740 wrote:
I just bought a new IBook Pro to replace an old unit.
I assume you mean a new MacBook Pro correct? From Apple, a brand new machine, not a recently bought older model Mac?
I loaded Microsoft 2008 office.
Some reports of issues "fresh installing" Office 2008 on a Lion (OS X 10.7) equipped Mac (all new ones have this)
http://roaringapps.com/app:2533
I am getting an error
“Unable to establish a secure connection to pop-sbc.mail.am0.yahoodns.net because the correct root certificate is not established”
Could be a issue with yahoo, or your ISP, or your new machine.
I would try again later and see if the issue clears itself up. Make sure your computer is updated via Software Update, this should give you the updated root system certificates.
Also head over to Keycahin Access>Preferences then Certificates and set Best Attempt, Best Attempt and Require Both for the three settings. This will make sure your certificates are well checked before using.
If your using a older machine, like 10.5, then there are no longer any root certificate updates from Apple.
I have all the same settings as my old Mac which worked fine but the new computer is giving me this error.
So it works fine on the older machine and not the newer.
Well it could be that becaue you installed Office 2008 (same license) on another machine that there are security issues at play to prevent a cloned machine from intercepting emails.

Mac Pro refuses to establish a vpn connection

Hello out there...
I have a 6 month old Mac Pro. Unfortunately this computer refuses to establish a reliable vpn connection to my office. All the other gear I have (powerBook, iPad and iPhone) does it.
The Mac Pro is erratic. Sometimes he connects but then all of a sudden after two or three minutes the vpn connection is beeing closed. The other day it works for hours....
He did so before the system upgrade and does it now after the upgrade to 10.6.8
I am realy desperate to get a solution for that....
All the best
Peter

Hi Kris,
The ASA supports different kinds of VPN, i.e. SSL (aka SVC for Ssl Vpn Client), IPsec or L2TP/IPsec.
For IPsec it suports both IKEv1 and IKEv2 (as of version 8.4).
On the client side,
the legacy Cisco VPN client uses IPsec with IKEv1.
Anyconnect 2.x uses SSL.
Anyconnect 3.x can use either SSL or IPsec/IKEv2.
So the Cisco clients do not use L2TP, but L2TP functionality is built-in in some OS's, like Windows and Android.
Personally I have not had the opportunity yet to lay my hands on an Android device to try this out, so I hope Michael or the people in the other thread can help you out if you need more details.
As to what's different, that's a short question with a long answer
One important difference between SSL and IPsec is that at some places IPsec may not work because the network provider blocks UDP500, while SSL uses TCP443 which is usually not blocked because it's the standard port for HTTPS.
Another one is that for Anyconnect, you need a license on the ASA (it does include a free license for 2 concurrent users).
Just a few pointers:
And probably Wikipedia is a good place to start reading as well if you want the full picture
hth
Herbert

VPN connection with Lion doesn't work

Hello,
I am using the System Preferences to connect to the VPN network of my university. It's a Cisco IPSec. But since the update to OS X Lion it doesn't work anymore. I did not change the preferences of the VPN so they are correct. I also deleted the VPN connection and re-enetered the VPN settings but it stil doesn't work. Yesterday I asked the people from the computation centre but they have also no clue.
Does anyone has a clue what to do?
Best regards
Frank

Is your disk partitioned into more than just one mac partition and the bootcamp partition by any chance?
A second Mac partition?
This sympton is often caused by the Windows partition moving to be to be the 4th or higher partition, which it doesn't like for booting. Lion installs an extra partition - the recovery partition at the beginning of the drive and shuffles everything down one effectively, so if your bootcamp partition was the 3rd it becomes the 4th and Windows becomes unhappy about booting

Cannot logon via VPN connection using an ICS server

At home I have a small network set up, using a central PC A on which Internet Connection Sharing (ICS) is enabled (IP address 192.168.0.1 is allocated to this PC). PC B, having VPN client V4.0.x loaded, is connected to PC A. ICS dynamically attributes an IP address 192.168.0.n to PC B. Although a VPN connection (via IP address 194.79.185.227) can be created with a server at the office over the internet, it is impossible to perform a Windows logon and map for example a drive. When using a direct internet link via a telephone modem, it is possible to logon on the office server via the VPN connection.
I have the impression the Cisco firewall inhibits the logon, because of a IP address conflict. When looking into the "Status/Statistics/Route details" window of the VPN client, I notice the secured route 173.19.31.0 is available during the VPN connection. Using the direct telephone line it is possible to ping this address. On the same PC this is impossible, when the ICS server (PC A) is used for the internet communication. The server I am trying to reach at the office has IP address 173.19.31.1.
On the Cisco web site, I found out, that such a configuration should work. Which settings are important with this respect?

I have never found a version of ICS that works with VPN.

Cannot Make PPTP VPN Connection in 10.7.4

As far as I can tell everything is setup correctly but every time I try to connect I get this message:
You were disconnected by the communication device. Try reconnecting. If the problem continues, verify your settings.
Console Log:
6/25/12 5:11:40.382 PM pppd: PPTP connection established.
6/25/12 5:11:40.443 PM pppd: Connect: ppp0 <--> socket[34:17]
6/25/12 5:11:40.447 PM pppd: PPTP error when reading socket : EOF
6/25/12 5:11:40.447 PM pppd: PPTP error when reading header : read -1, expected 12 bytes
6/25/12 5:11:40.447 PM pppd: PPTP hangup
6/25/12 5:11:40.448 PM pppd: Connection terminated.
6/25/12 5:11:40.454 PM pppd: PPTP disconnecting...
6/25/12 5:11:40.455 PM pppd: PPTP disconnected
I am trying to connect to a Linux based VPN server. I have double checked my username and password multiple times, made sure the MTU is set the same on client, server, and router, and tried turning the encryption off and on on the server and the client. Nothing has made a difference, I get the same error every time. I am able to FTP and SSH into the Linux box.
Any suggestions of other things to try would be much appreciated. I saw some threads about editing config files on my mac but this is a brand new machine that I have had for a week running an OS that is on it's fourth point release. I really should not have to muck around with config files but at this point I'm ready to try anything.

Looks like it might be a configuration error on the server's end. The VPN makes a connection and tries to read the server's configuration to create a socket for communication, but runs into a formatting error when it is passed an "End of File" character instead of a required component of the socket. Can you try connecting to another VPN server, or perhaps try an L2TP connection instead of PPTP?

Cannot establish a ftp connection to xmldb-filesystem

Hey everyone,
how can I connect via ftp to the xmldb-filesystem ?
I tried the instructions from this website http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/xmldb-filesystem/index.htm (didn't found an english site, sorry). Now I can connect to the filesystem via "win7 shell ftp", but i cannot connect via "win7 explorer" using "ftp://host:port/foo/bar" or filezilla. Everytime i try i got an errormsg like:
filezilla: cannot read filesystem
and
win7
an error appears :
detail:
200 Type set to A.
277 Entering Passive Mode.... see sreenshot -> http://imageshack.us/photo/my-images/841/ftpg.jpg/
If anyone need more information just ask.
Mario

955767 wrote:
Hey everyone,
how can I connect via ftp to the xmldb-filesystem ?
I tried the instructions from this website http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/xmldb-filesystem/index.htm (didn't found an english site, sorry). Now I can connect to the filesystem via "win7 shell ftp", but i cannot connect via "win7 explorer" using "ftp://host:port/foo/bar" or filezilla. Everytime i try i got an errormsg like:
filezilla: cannot read filesystem
and
win7
an error appears :
detail:
200 Type set to A.
277 Entering Passive Mode.... see sreenshot -> http://imageshack.us/photo/my-images/841/ftpg.jpg/
If anyone need more information just ask.
Mariowhat do you see when you try ftp from a Command Window?

I am using Mavericks 10.9.4. I have Safari 7.0.6. I cannot connect to google, youtube and other sites because "safari cannot establish a secure connection" to these servers. Any ideas? Note that Google Chrome can connect to these sites.

Just recently I notice that quite often I cannot connect to sites using Safari (7.0.6). I am using the Mavericks 10.9.4 OS. Often when I go to somewhere else, I can connect and then back at home the connection works. However, the connection at home can suddenly decide not to connect to these sites. I am not sure whether it is a problem with my router or not, but then again, Chrome does connect to these sites as well as windows 7 (even when using Safari on windows). So it seems like there is some issue with my Mac at my home. But not always - so this is the confusing part.
Has anyone else seen this kind of behavior? If so, I'd appreciate, if not a solution, at least some cause for this.
Thanks.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Cannot establish mysql database connection with j2ee application

Hello All,
I started studying J2EE technology about a month back. I have this simple application involving a couple of servlets and jsps. The code is from a reliable source , so I know that there is nothing wrong with the prog code. Now the code uses a simple database, where I am stuck! I just can't connect to the database Mysql.
I downloaded Mysql database from the mysql site.
I downloaded JDBC driver for mysql from the same site.
Can somebody please tell me which files(from the driver that I downloaded) have to be unzipped to jar files to be set in the class location?
Any help is highly appreciated.
Thanks
Starting WithJ2EE

Hello All,
I started studying J2EE technology about a month back. I have this simple application involving a couple of servlets and jsps. The code is from a reliable source , so I know that there is nothing wrong with the prog code. Now the code uses a simple database, where I am stuck! I just can't connect to the database Mysql.
I downloaded Mysql database from the mysql site.
I downloaded JDBC driver for mysql from the same site.
Can somebody please tell me which files(from the driver that I downloaded) have to be unzipped to jar files to be set in the class location?
Any help is highly appreciated.
Thanks
Starting WithJ2EE

Just got MBA and Safari cannot establish a secure connection

MacBook Air 13" running Mavericks using Safari (all brand new). The proxy server is eSoft on an Instagate 604. The thing is that my MBP uses Mavericks and is behind the same Firewall and it works just fine. When I'm not behind the firewall my MBA works fine as well. Is there something on the MBP that isn't on the MBA that I need to install? I can't even get to Google Chrome or Mozilla Firefox download sites to download a different browser.

Contact eSoft, they may know a special setting.

Safari cannot establish a secure connection with the server

It wont let me log in to HTTPS sites such as Facebook and Gmail

HI and Welcome to Apple Discussions...
Might be a cookies issue. From the Safari Menu Bar click Safari/Preferences then select the Security tab. Click the Show Cookies button. Delete Facebook and anything Google or GMail related and click Done.
Now from the the Preference pane from the Menu click Autofill. Click the Edit button next to Other forms. Delete .facebook.com and .google.com Under the Autofill tab, make sure Usernames and passwords is selected.
Relaunch Safari. If the problem persists, open your Keychain Access application (Applications/Utilities). Select Passwords on the left then delete the Facebook and Google keychains on the right. Relaunch Safari. Navigate to Facebook. Login using your username and password. When prompted, click Yes. Same for Gmail.
You may also need to empty the Safari cache. From the Safari Menu Bar, click Safari / Empty Cache.
Carolyn

Cannot establish a VPN connection in Lion

Similar Messages

Maybe you are looking for