Cannot establish Bluetooth connection between iphone4 and ipad2
I have an iphone4 which cannot connect via Bluetoooth with ipad2, even though I tried all that is said in Apple support , but still no success. Really cannot understand as my iphone4 connects to a Bluetooth ear piece which is of different make and these 2 piece's are from Apple but cannot establish a connection via Bluetooth. It's surprising. So please help and advice.
thanks Guys
The iPhone is not designed to Bluetooth pair with a computer or an iPad except for personal hotspot (sharing the phone's cellular internet connection). It can use Bluetooth for Handoff/Continuity and for Keynote Remote but the devices are not paired. More information: Bluetooth: Why can't I pair my iPhone or iPad with my computer?
Similar Messages
-
bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgradeHi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy -
How to establish the connection between crm and r/3
Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
AjeyHello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor -
Testing Bluetooth connection between iPhone and MaxBook pro
Hi everyone:
I'm testing the GKTank sample from the SDK for the purpose of learning how the Bluetooth connection can work between two iPhone/iPad devices. I do not have the second iPhone to test it with so at the moment all I have is my iPhone 4 and a MacBook Pro that runs GKTank app in a simulator.
But what happens is that when I fire both (the app on iPhone and on the simulator) the simulator always pops up a message that my iPhone was discovered (in the list for the GKPeerPickerController window) but my iPhone never does the same thing and its GKPeerPickerController window simply shows "Looking for other iPads, iPhones, or iPod touches..."
Can someone tell me why is that and if it is normal?I get a similar result. I can initiate the game from the sim side and get an accept/decline on the iPhone4, but as soon as I accept the game ends on the sim side. Frankly, I didn't expect it to get that far.
-
APO/BW: Verifying/Establishing a connection between BW and APO
Hi
1. Is there a way to see that my BW system is connected to an APO system, other than finding a name with APO in it under the Source System tree in BW?
2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
3. Does a successful in Generate Export DataSource in BW indicate that my BW system is connected to APO DP?
Thanks. Is there a way to see that my BW system is connected to an APO system, other than finding a name with APO in it under the Source System tree in BW?
In source system tree, you will find all the systems that are connected to your BW system. The system name need not have to start with APO.
2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
Transaction Sm59. you need to know the source and destination IP adresses. Usually, the baais will take care of connections.
3. Does a successful in Generate Export DataSource in BW indicate that my BW system is connected to APO DP?
NO. Export generaion is within BW system; nothing to do with the APO system that is connected.
Ravi Thothadri -
"Unable to establish a connection between WebEx and the mail server."
Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture. -
Can't use internet with bluetooth connection between iPhone and macbook
My iPhone and my macbook both show that I have a successful bluetooth connection, but I can't use the internet on my macbook. What might be the problem?
jeb wrote:
My iPhone and my macbook both show that I have a successful bluetooth connection, but I can't use the internet on my macbook. What might be the problem?
Basic question: Do you have a tethering plan with your carrier? It isn't automatically provisioned; you have to ask for it and pay extra with most carriers. See these tips from Apple:
iOS: Understanding Personal Hotspot
iPhone: Troubleshooting Personal Hotspot -
IOS5: bluetooth connection between iphone and ipad fails
Hallo, a
fter instalation of ios5 on both devices, my iphone4 cannot be no more connected to ipad1 over bluetooth. The both devices "see" each other, but when I coose on both - the connection it simply doesn´t established!?
I have checked all options, it seems to be ok?
Thanks in advance.
Gruss,
SafiHi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy -
Cannot establish a link between MacPro and Windows 2003 Server
I just had an issue where we had a server crash. This server supports several PCs, as well as two Macs. The server has been brought back online and can communicate with all of the PCs. However, neither one of the Macs can now communicate with the server.
When I try to connect through the sidebar in the finder window, it will bring up the authentication window. But after I type in my password and hit enter, it gives me the message, "The alias "" could not be opened because the original item could not be found."
When I try to connect through Go>Connect to Server, it gives me the message, "The Finder cannot complete the operation because some data in "" could not be read or written (Error code -36).
My IT guy says that everything is alright with the server and that the problem has to be in the Mac settings. He does not know anything about Macs, however.
Can somebody help me out with this issue?The only thing that comes to mind is a few settings in the Security Options of the Local Policy. Here's a link:
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
Not sure if that's it, but I hope it helps. -
Bluetooth connection between 6230 and Tom Tom One
I use a Tom Tom One sat nav and I tried to pair my 6230 with it but for some reason they do not want to communicate.
I went through the procedures, correct settings on my mobile and let the sat nav do it's installation. Eveything seemed to go well and my sat nav said it was connected to my phone but when I tried it out there is no communication between them.
Any help.Presumably you didn't sort this out as there were no replies?
If you did sort it hot, how? I have a similar problem with my connections. -
Bluetooth on Mac os x won't work with keyboard, mouse or iphone. Keyboard and mouse both have new batteries and go discoverable when switched on, i have gone into system setup and tried connecting. It connects briefly with mouse then drops in and out of connection, keyboard does same, asking for passcode then no connection. I'm lost... my phone can pick up keyboard, so i think it is bluetooth in mac.
Go to ~/LIbrary/Preferences
Move the com.apple.Bluetooth.plist file to the Trash.
Restart your Mac.
Try re "pairing" the keyboard.
~ (Tilde) character represents the Home folder.
For Lion: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library -
Bluetooth connection between iPhone and MacBook Pro
Is it possible to browse files on my iPhone from my MacBook Pro (MacBookPro3,1 Serial Number W873325SX94, OS X 10.9 (13A603)) via Bluetooth?
An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458 -
Trying to connect iPad Air latest version to a Mac Mini running Yosemite .Connection is made by Bluetooth (hoping to access the Drafts folder of the iPad to lift off attachments to Mac mini) BUT the connection drops out after 20" or so.
Jailbroke?
-
Can't establish cable connection between mini and TC
I recently had to restore the system on my mini.
it is now in a 'just purchased' state.
previously i backed up everything wirelessly (even the initial backup),
so now i have the most recent working backup on my TC.
NOW i want to restore the system from TC to its recent working state.
but it seems i can do it only wirelessly, as hooking up mini and TC via Ethernet cable won't help mini see the TC.
I turn off AirPort on my mini,
connect TC's LAN port to mini.
Turn on TC.
In my Network Settings
Ethernet properties are:
Location - Automatic
Status - Connected (active and has the IP address 192.168.1.12)
Configure - DHCP with manual address
IP Address - 192.168.1.12
(DHCP can be left automatic with the only difference that
Status says CONNECTED, BUT since the 'IP is assigned automatically, Ethernet MAY NOT be connected' - have no idea what this MAY NOT means, although when i unplug the cable, Ethernet connection disappear from the list)
Now the Time Machine doesn't see any devices as the source of backup.
What am i doing wrong?
i can still run the time capsule wirelessly, but as far as i remember the initial (wireless) backup of approx 80 gigs took more than 24 hours... i'm not that patient anymore.
Please help.
Thank you.I recently had to restore the system on my mini.
it is now in a 'just purchased' state.
previously i backed up everything wirelessly (even the initial backup),
so now i have the most recent working backup on my TC.
NOW i want to restore the system from TC to its recent working state.
but it seems i can do it only wirelessly, as hooking up mini and TC via Ethernet cable won't help mini see the TC.
I turn off AirPort on my mini,
connect TC's LAN port to mini.
Turn on TC.
In my Network Settings
Ethernet properties are:
Location - Automatic
Status - Connected (active and has the IP address 192.168.1.12)
Configure - DHCP with manual address
IP Address - 192.168.1.12
(DHCP can be left automatic with the only difference that
Status says CONNECTED, BUT since the 'IP is assigned automatically, Ethernet MAY NOT be connected' - have no idea what this MAY NOT means, although when i unplug the cable, Ethernet connection disappear from the list)
Now the Time Machine doesn't see any devices as the source of backup.
What am i doing wrong?
i can still run the time capsule wirelessly, but as far as i remember the initial (wireless) backup of approx 80 gigs took more than 24 hours... i'm not that patient anymore.
Please help.
Thank you. -
Can not Establish Connection between outlook and exchange 2013
hi guys
i recently install my exchange 2013 sp1. I configured DAG and its working great.
but the main problem is outlook. I deploy all of the dns records in my public dns but now i cannot establish any connection between exchange 2013 and outlook 2013.
I mean when i want to create a new email account for my users i face with this error :
" the name cannot be resoved. the connection to microsoft exchange is unavailable . outlook must be online to connected to complete this action "
and finally when i study an article it refers to enable mapi over https in exchange 2013, I enabled it by powershell cmdlet but when i want to test it it gives me error :D
help me plz :DHi,
We need to configure Exchange Server 2013 for mail flow and client access with the following steps.
Create a Send Connecter
Add Additional accepted domains.
Configure the default email address policy.
Configure External URL.
Step5: Configure Internal URL.
Configure an SSL certificate.
For more details, please refer to this document.
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
If there is any further question, please let us know.
Best Regards.
Maybe you are looking for
-
The Haven is my husbands phone and he calls me from work every night and we talk about 15 minutes. He calls my verizon phone so there is no charge but the problem we have is the phone will not stay charged. We took it in and had it tested along wit
-
Letterbox downloads and installs and is enabled, but does not produce the 3 columns in the mail window. I had the same problem with 10.6.7 and now 10.6.8. The download is the latest version (0.24b9) and the forums indicated that it works with both
-
MBP randomly crashes when in clamshell with external display
Hi Mac people. As described in the "subject field" i have been encountering some random crashes after i startet using my MBP in clamshell with my newly pruchased 24" 16:10 NEC display . typically it occurs after about 10-20 minutes of playing world o
-
Tried the various disable options with no joy. Don't know what else to do
-
Windows host process (Rundll32)
I am getting an Internet Explorer Security error come up when I open explorer. A website wants to open web content using this program on your computer. "Windows host process (Rundll32)." Publisher is Microsoft Windows. can someone let me know what th