CANNOT EXECUTE "CEC_MAIN.EXE" after Kasperesky installation

HI,
iIm using Toshiba Satellite series laptop.
Ever since i installed kasperesky software, i'm getting this msg, when i start my system: CANNOT EXECUTE "CEC_MAIN.EXE".
Kindly help.
sandeep sathyan

Hi!
The CEC_MAIN.EXE belongs to the Camera Assistant software. The file you find on C:\Program Files\Camera Assistant Software for Toshiba.
I think the software will be blocked by Kaspersky Firewall. So allow the CEC_MAIN.EXE in the software and then the problem should be solved.
Bye

Similar Messages

Cannot execute java.exe

I'm really having a hard time here. I have installed, uninstalled and installed again SDK1.3.1. I've updated my autoexec.bat to look as follows and I still get cannot execute c:\jdk13\bin\java.exe when trying to do the -version command. I'm running Windows ME. Any suggestions????
SET PROMPT=$p$g
SET TEMP=C:\WINDOWS\TEMP
SET TMP=C:\WINDOWS\TEMP
SET COMSPEC=C:\WINDOWS\COMMAND.COM
SET windir=C:\WINDOWS
SET winbootdir=C:\WINDOWS
SET PATH=C:\jdk13;C:\jdk13\bin;C:\jdk13\jre;C:\jdk13\lib;C:\jdk13\include;C:\WINDOWS;C:\WINDOWS\COMMAND;C:\PROGRA~1\DELL\RESOLU~1\COMMON\BIN
SET CLASSPATH=.;c:\jdk13\lib\tools.jar
Thanks,
Leeanne

Didn't work :(:(:(:( I've even went to the bin directory and try to execute java -version from the directory and still get an error cannot execute c:\jdk13\bin\java.exe. I get the same error trying javac too. I really want to learn java, but not having much luck. Is there a problem with Windows ME and Java??
Thanks!

Cannot find Runtime Assitant after complete installations

Hi Gurus,
I have tried deploying OWB 10g along with Oracle 10g (10.2) as well as with Oracle 9i (9.2.0). Both the times the installation was successful but I could't find the Runtime Assitant anywher after complete installations.
I found Repository Assistant with the help of which we created the Design repository but was unable to find the Runtime Assistant in the installed components.
Please help..
Regards,
AB

As detlef pointed out, in the OWB 10gR2 version, there is no more notion of separate repositories. Check out this thread:
Design Repository / Runtime Repository OWB 10gR2
But for every database hosting a target schema you need to install and have running the OWB runtime service. This service is then accessed using the Control Center, previously known as the Runtime Repository Assistant.
Cheers,
Borkur

Nightmare Customer Service Verizon - DAD cannot connect phone line after fiber installation

Similar to other complaints I have seen online yet Verizon customer service reps deny they have ever heard of the problem. After FIOS installation my ADT system stopped communicating.
We had Verizon FIOS triple play installed last August (2012) after a summer long marketing campaign by Verizon. Several trips to get it. A dropped phone number transfer order and Verizon tried to issue me a new phone number ... that took several attempts to fix.
Sept 2012 Our ADT service calls us to inform us our monitored alarm system stopped communicating since Aug ... I call ADT -they say it was Verizons fault, but could come out and fix it for a fee. It took months to getr back to Verizon
I first spent almost an hour online last night with a Verizon rep who claimed it was not Verizon's fault - Claiming that all the tech had to do was deliver a phone signal to one jack. I called Verizon customer service and wasted time with that rep also. I asked hat a supervisor call and the rep could not confirm that a supervisor would even get back to me.
TERRIBLE CUSTOMER SERVICE - Time to cancel Verizon

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".
There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.

Cannot execute sapevt.exe on a Windows platform

Hi
for some reason I cannot get the sapevt.exe program to raise an event in SAP when running on a Windows platform. The command line I'm using is :
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\sapevt.exe event=EVENT_NAME -t2 name=<SID> pf=D:\usr\sap\<SID>\SYS\profile\DEFAULT.PFL
It doesn't write an dev.evt trace file either. Also I'm using inside a VB script.
I can raise the event from within SAP Tcode SM62 and it runs fine in a Unix environment with slightly different parameters of course
Anybody help please.
I've looked at notes 802172 and others and tried all the suggestions within.
Thanks
Regards
Steve

I have the following command defined in SM69 that works on our Windows-based SAP systems:
Operating system command = sapevt
Parameters for operating system command = ? -p ? -t pf=$/DIR_INSTALL/\profile\default.pfl
Additional Parameters Allowed is checked
What not try and define that and then trigger it inside SAP itself? It might clue you in as to what the issue might be. The input parameters are the event name and then any additional parameters when triggering the event.
Brian

CANNOT EXECUTE SETUP.EXE

All,
I am trying to install Oracle 816 or 817 on my Sony Win 2000 Professional laptop. For some reason when I click on the setup.exe on either the 816 or 817, nothing happens. There is some activity for about 4 seconds and then nothing.
Has anybody seen such a problem before?
I also tried installing off a CD. It brings up the first screen which asks me to select options one of which is Install/Deinstall products. I click on it and then nothing happens
Any help would be appreciated
Thanks

I am having the same problem on a variety of P4 boxes with a variety of OSs W2000, Linux, XP. Is there a way to pass the '-nojit' to the jre instead of the solution referenced here? Alternatively, is there a P4 compatible version of the jre from IBM for Linux and W2000/XP?
Thanks,
Chris
Sometimes this can be due to things like anti-virus programs running in the background. Make sure all real-time virus scanning is disabled before running setup. Peter.
Thanks for your suggestions. Actually it is because I have a P4.
The solution
1.) Search for symcjit.dll file in you Oracle folder. There are two of them. Rename them to symcjit.dll.old (or anyother name). These don't play a big role in the installation. Then re-do the installation using the Oracle installer.
It should work.
Thanks

ADT cannot seize phone line after fiber installation

I had my phone line switched over to fiber today and now my ADT system cannot "seize" the phone line. It will call out properly but if you are in the middle a call and the alarm is activated it will not disconnect the current call in order to make it's own call out to the monitoring center. Of couse this was working before.
I talked to the tech that installed the fiber and he said his only responsibilty to me was to provide me with a dial tone, period. I also called Verizon tech support and talked to three different people who all told me it was ADT's problem. So now I have to call ADT and incur a fee to have them come out and fix it. So much for Verizon's promise to me that an upgrade to fiber would not cost anything.
Is there anyone is this forum that may have experienced a similar problem? Any help greately appreciated.
Solved!
Go to Solution.

armond_in_nj wrote:... Verizon Digital Voice (if that's what you have and it seems likely that's the case) is capable of using typical alarm system components to transmit alarm system data. Usually the data is transmitted using what's called "Contact ID" data, and usually the connection between the alarm system and the telco lines is handled by a simple device called an RJ31X connector. I suspect that's the case for ADT, but you must check that with your monitoring company ...
Some further thoughts on the issue. Here's a link to demonstrate what's involved in the RJJ31x wiring scheme:
http://wiki.hometech.com/tiki-index.php?page=How+to+Wire+an+RJ31X+Jack
As you can see it appears little "hairy" and in fact there's really only one way to do it correctly. Of course that's what alarm technicians are for, and there's no need for the average user to get into the details.
After thinking about this a while, it occurred to me that what has probably happened in your case is that the VZ install tech never went near your RJ31x connection. He (or she) just did what a normal install requires and got things working. However there are certain requirements for the alarm setup to operate correctly.
The RJ31x mustt be the first device in line after the phone line comes into the building. In old terminology this means that it must be wired in directly after the NID (network interface device) where the phone company hooks up to your house. In this way the alarm can take over the line for all phones downstream.
However with FiOS Digital Voice, this is probably not how your house was connected. I.e., the install tech can connect to your interior phone wiring network at any point and still get all the phones to operate correctly. What doesn't happen in such a case is the alarm is not able to control all the phones downstream, because some of the phones aren't really "downstream."
As convoluted as this seems, the way out is simple: the alarm company must pay a visit and make sure that all your phones are connected (from the VZ ONT) after the RJ31x. This should be pretty easy, and it's really on the alarm company to make it work.
Let us know what you decide and what happens (using your personal service ticket mentioned by Lawrence). Once again, good luck.

Camera Assistant Software shows CEC_MAIN.exe error

Hi, i have trouble with my webcam software.
My Camera Assistant Software v. 1.7.171.0103 didn't working. Every time I click it, always show dialog box : "CANNOT EXECUTE CEC_MAIN.EXE. Please reinstall this program". I have reinstall the program but still show that box. So, I can't use my cam. Strangely, it working if i trying the Face Recognition...
Please help me... Thanks a lot...

Hi, thanks for the help... ^^ ...
But just now i have change my OS to Windows 7 Ultimate from Windows Vista Home Edition. My laptop is Toshiba L300.. And now have trouble again...
Not about CEC_MAIN.exe ( i have changed the setting in Kaspersky), but now it always show : "Webcam driver open fail. Please restart camera or computer." when i click the icon... I have try to reinstall the driver, but is has the same result.
Please the help.. Thanks so much... ^^

Cannot find java.exe when executing Sun Java Enterprise 8.1

I downloaded and installed Sun Java Enterprise 8.1 (actually because I kept getting not enough space messages I downloaded it in 3 parts). When attempting to execute by clicking on the icon I keep getting a message saying "cannot find java.exe". I previously installed the java runtime successfully. Is anyone familiar with this and if so how do I get around it. I am running Win2k SP4 on a laptop. Thank you for any insight you can provide.

Hi,
I faced same problem. I had jdk 1.5.0_05 installed on C: drive directly. But When I check the log though the installation found the version it was assuming it to be at 'C:\Program Files\Java' so even after finding the installed JDK it was failing. When I copied the JDK at 'C:\Program Files\Java' and then uninstalled and reinstalled the Sun java studio 8 again, at this time it asked me about which JDK to use! Then there I could point to C:\jdk1.5.0_05. Then everything went through fine. I guess this is some problem in installation code. Try this out.

Cannot start j2ee engine after installation

Hi All,
After installation of WAS 6.30 (Netweaver 04) on IBM AIX 64 bit (with db2) my server is running but very slow.
When the server is stopped and started the first time after the installation the dispatcher is running just fine but the server is not loading all applications. The server is timing out during load but with telnet its possible to load the applications manually.
I tried to change the memory settings as described in some of the SAP notes but still no luck.
The server is now failing with the following message in the dev_server0 log file (work directory) and the server is never writing to the output log file.
ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-6) [jhvmxx_mt.c 466]
ERROR => Cannot load Java VM (<default>) (rc=-1) [jlnchxxi_mt. 557]
JLaunchCloseProgram: good bye (exitcode=-1)
Changing the memory settings back again doesnt change anything. The server is not starting!
The server has 2Gb of memory, enough disk space and is running the correct JDK version.
Any ideas?
Thanks in advance!
Regards
Michael

Hi,
Thanks for the answers.... but the settings are already tried without success.
Finally SAP came up with a solution that worked.... deleting the file instance.properties.vmprop solved my problems with starting the j2ee engine.
Regards
Michael

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

problem solved.
I phone 4s screen froozen

I have windows xp and installed Firefox version 4. and it informed me it disabled something because it was incompatible but I did not write it down. do you know what that is? after that, my laptop cannot start cmd.exe any more.

I have windows xp and installed Firefox version 4. and it informed me it disabled something because it was incompatible but I did not write it down. do you know what that is? after that, my laptop cannot start net.exe, calcls.exe, and cmd.exe application any more.

See [[Firefox keeps opening many tabs or windows]]

Re: Message appears Toshiba\CEC_MAIN.exe missing after booting

At start up the following message appears: Program Files\Camera Assistant Software for Toshiba\CEC_MAIN.exe missing. Re-install.
All systems otherwise operate normally.
How do I reinstall this software. I have recovery disc made when machine purchased.
Can anyone help? thanks

Hi
The CEC_MAIN.exe belongs to the Chicony webcam software which is preinstalled on your notebook.
Seems something went wrong with this software and the exe file cannot be found.
In such case I recommend reinstalling this software.
You can find all drivers for your notebook model on the Toshiba European driver page.
http://eu.computers.toshiba-europe.com
There you will find the webcam software.
Greets

Cannot execute work item from email after autoforwarding

Hi All,
I just beginning with workflow. We configured autoforwarding work items by using report RSWUWFML.
After running the report, can receive mail in outlook.
The mail saying
' You can execute it using the link below:
&_wi_exe_url&
But I cannot execute the link. How to solve this issue?
Your help appreciated.

Hi Aditya,
In my system, the report's option 'with executable attachment' is grey out and I cannot select it.
I would try to upgrade the report to a newer version and then try again.
Thanks.
Jacky

CANNOT EXECUTE "CEC_MAIN.EXE" after Kasperesky installation

Similar Messages

Maybe you are looking for