Cannot execute FlexUnit Test in Flash Builder 4.7 - File not found: FlexUnitApplication.swf

Hello!
I would like to run FlexUnit Tests from within Flash Builder 4.7 but when I launch "Execute FlexUnit Tests", I get the "Launch failed" message popup with text: File not found: FlexUnitApplication.swf
Is it possible to fix this?
I'm using Mac OS 10.9

Hi Atul_Saini,
So I checked your link and all seems correct on my computer.
At the bottom of the link you provided there is "see also" section, about activation / deactivation.
I did not deactivated my licenses before my window re-install, and if now I go to Flash Builder -> Help , desactivation button is greyed out. Could it be the source of my problem that I used my licenses on two computer and did not deactivated them ?
If yes, how could I deactivate thoses products ? I searched on my profile but I can't find a way to do it.

Similar Messages

Folio Builder Error: Source Files Not Found

I'm having some weird issues with DPS that are preventing me from editing folios. Whenever I try to update, import or add an article to a folio (whether it's a new or existing folio), I get one of the below error messages saying that the source files cannot be found. However, I haven't moved any of my files. Also, it doesn't make sense that I get this error when creating a new folio and trying to import/add a new article as I'm inputting where the files are located.
I've also tried reinstalling the Adobe folio tools. Anyone know what's going on? Thanks for the help.
Error message text:
"An error has occurred opening the source file for the article layout. The InDesign file for the layout cannot be found."
"Content generation error. [SourceFilesNotFound]"

Fuzzpocket17's issue was found to be caused by the following:
He had a working install of InDesign and the Folio Producer tools when he left on vacation. When he came back, he did not. It turned out that his IT had converted his user account on his Mac to be a Managed Mobile account, synching their data to a new network volume named "Users". When he unmounts that volume, all his Folio Panel activities returned to normal. T
o see if you have a Managed, or Managed Mobile account, open the System Preferences and choose the Accounts pane. Look at the description under your account. Here is what a Managed Mobile account looks like:
Managed accounts have the ability to be restricted in many ways. One of those restrictions could be preventing the application from reading/writing to the CS<N>ServiceManager folder refernced in my earlier post. Again, if you find this to be the case, consult with your IT. You may need to revert to a non-Managed account to have the Folio Builder panel operate correctly, until your IT can ensure normal user/library file access.
Sincerely,
Matthew

Flash Builder 4.5 is not responding...

When I try to execute a project in Flash Builder 4.5, it is not responding. And still in the same position all the time. This project is working fine on yesterday also.Can anyone please tell me what the problem is?

I see my device there available. Here is the command along the response:
C:\Android\android-sdk\platform-tools>adb.exe devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
4C5499EFF384 device
So, I can see my device in Android but not in Flash Builder 4.6
Thanks

Error 7 Build Error - File not found

I am trying to build my software to another computer over the network. I am able to access the directory I am installing to and the program is not indicating any build errors(all VI's are not broken). This error only occurs when building. Any suggestions would be great.
Thanks,
Nate
The Build was unsuccessful
Possible Reasons: An included VI or one of its dependencies does not exist. Open all Startup/Exported/Dynamically called VIs, recompile them (Ctrl-Shift Click the run arrow), and save them to update their dependencies.
\\PAINESTORAGE\Engineering\Test & Manufacturing Software\AutoTest Software\Current Version\AutoTest ...
Extended Details: Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Rule_Editor.vi -> EBUIP_Item_OnDoProperties.vi -> EBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
-Nate
Solved!
Go to Solution.

Is there a way to see a report of the dynamically called VI's? I inherited this software and am relatively new to LabView...
-Nate

Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.

HI
i restored a sharepoint web 80 application in our test domain
and after when i browse the new web application
it says
Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.
adil

Hi adil,
According to your description, my understanding is that you encountered the error “Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file
exists under the layouts directory.” .
The issue happens in
We have customized master page
In the master page, we use path the script/style file like this: <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/coe/mainCOE.css%>"
runat="server"/>
While using the dynamic path in a multiple languages enabled site, language Id(1033 etc) will be added to the path automatically. That cause the file to be not found.
To solve the issue, please download the Arabic language pack http://www.microsoft.com/en-us/download/details.aspx?id=3411 ,
install it on your SharePoint and refresh your browser.
Reference:
http://sharepoint-community.net/profiles/blogs/cannot-make-a-cache-safe-url-for-1036-sytles-themable-corev4-css
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error message when installing Flash Player : List of actions not found

I get an error message when trying to install Flash Player.
I use Windows 64 bit with Internet Explorer 64x.
I'm able to download, the installation starts but it stops before completing.
I get this error message (loosely transalated) :
Installation encountered errors
List of actions not found
How can I fix this ?
Thank you
Annie

I solved my problem by installing the Flash Player from home.
The network security at work prevented me from completing installation.
Thanks for your help.
Annie
2012/9/26 Pat Willener <[email protected]>
Re: Error message when installing Flash Player : List of actions not
found created by Pat Willener <http://forums.adobe.com/people/pwillener>in
Installing Flash Player - View the full discussion<http://forums.adobe.com/message/4728064#4728064

Cannot delete file error -43 file not found

I cannot find and/or delete a file. The error is -43 file not found. It prevents me form making a backup with carbon copy.
The file was in applications / illustrator / legal / strangecharacters.html (now in trash) and size 112kb.
I am the admin of the machine on OSX 10.4.8
I have read & write permissions
Owner og the file is system.
I cannot change the filename: Unexpected error code -43!
I cannot change owner: Unexpected error code 213!
I cannot drag the file out of the containing folder i.e. legal (i get grayed stop icon instead of the expected green plug icon at the mouse pointer).
I can drag the legal folder around i.e. to the trash.
I can not delete the folder and its contents with empty or secure emtpy trash.
I tried:
Repairing privileges. Nothing to repair, all is well.
Rebuilding Locate Database but got 'cannot find the file code-43' while the folder was still in its original location: applications / illustrator /
I logged out and back as admin and different user.
I restarted.
I tried to delete the file via Terminal with rm and with command below as suggested by apple technote. The result is not as desired:
% chflags -R nouchg /Users/macuser/.Trash/Legal\ 22-06-59/Tie\314\202\314\201ng\ Vie\314\202\314\243t.html
chflags: /Users/macuser/.Trash/Legal 22-06-59/Tiếng Việt.html: No such file or directory
I started up from a different volume and tried the above.
Anyone?

as in my previous post, i found that part of my hard drive directory was corrupt. .ie. short version: there was a discrepancy between what the directory knew to be on the disk and what the finder showed me...
so i did a startup in single mode (command-s) and type fsck -fy at the prompt to do a disk repair. took aout three runs and 20 minutes but after that i got the desired message: disk appears to be ok. i typed reboot which restarted the machine. i then ran disk utillity repair privileges.
everything now is fine.
note: working with bluetooth keyboard and mouse in single mode worked on my G5 (not sure though if this applies to all models), also fans make a lot of noise, like your machine is about to take off... dont worry)
hope this helps
G5dual Mac OS X (10.4.5)

File not found in Link Between Projects Window - test no edit rights to other file

Hi,
I am doing a test to see if i can create a link by typing the link path (f.i. <>\plan2\1) in the predecessor column without having edit rights to the other plan.
I expect this to be possible as the edit in the other plan (creation of link) is only done after the change is accepted through the LBP (link between projects) window. Besides, when i do it to both my own plans, in this LBP window i get 'create external
link' as difference to accept.
When I do it on Project Server 2010 to a plan I do not own or having edit rights on, I got the message 'file not found'.
Is this message related to what I am trying or does it have another cause?
Does someone know if what I want can be done?
Rgds
Sander

Hi Sander,
I confirm that for creating a link between projects, you need to have access in read-write to both files.
Indeed creating such a link will write in both files information about successors (in the source file) and predecessors (in the destination file).
Note that if you only need to update the successor, you don't need anymore to open in read-write mode the source file, since you won't write any more information in it.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Problem with Vision Builder and LabView: Error -1074395995, File not found

I have created an inspection with Vision Builder AI 2009 SP1. In it I load some pictures from the HDD and run some checks over it. It works fine. Then I have migrated it to LabView 2010, I get a message that the migration is successfull, but when I run the VI on LabView I get a fail status. I have been checking my program and I have found and error when I try to load the picture from file: Error -1074395995 occurred at IMAQ ReadImageAndVisionInfo
Possible reason(s): IMAQ Vision: File not found.
But I am not sure which file it refers to. At first I thought it was the picture I wanted to load, but I have checked the path and it is correct, so maybe it refers to another thing. What puzzles me most is that it works perfectly on Vision Builder and I have changed nothing in LabView, maybe it is a problem with the migration. Any clues?

Here's a screenshot of what I'm talking about. Put a break point here and see what the path is and compare that with what Vision Builder AI is using (described where to find this in the previous post). You could find where this global is used to make debugging easier.
Hope this helps,
Brad
Attachments:
Generated Code.png ‏43 KB

SAP ME 6.0 Visual Test and Repair Local file not found

Hi,
In our SAP ME 5.2 environment we have Test & Repair installed on a separate server. On that server we also have a shared directory where we are placing our GenCad files (.CAD). These files we can sucessfully view in the POD on SAP ME 5.2.
Now I am trying out SAP ME 6.0. I have done:
- Installed Product Visualization 7.2 on my client device
- In System Rule maintenance I have set the rule VTR Model Location to point to our server where our GENCAD files are stored.
i.e ServerXXX
- In material maintenance for manufactured material A I have set the drawing name to point to the shared directory and .CAD file.
i.e D:/CADfiles/productname.CAD
- Created and released a shop order for material A
- Started the "POD - Visual test and Repair"
Entered operation
Entered Resource
Entered SFC for the shop order that is using the manufactured material with
Pressed "Start" - The SFC is now active in the operation.
Pressed "Model viewer" button
A part of the screen now says "Visual test and Repair" - 3D Model viewer. It is blinking a couple (3) of times, but nothing appears. When I press the "Model viewer" button once more. An error message says "Local file not found".
What is happening? Is GenCad files suddenly not working in Test and Repair? I have read something about purchasing ECAD file converters, is this what I need?
Br,
Johan

Problem solved after asking for eCAD converter licenses from Right Hemisphere.
/Johan

IPod cannot be synced. Required file not found?

I havent had any trouble syncing my ipod until last week when i purchased a song. When i dragged the song to a playlist on my ipod, it appeared grey in my playlist (because it was still loading) and then disappeared. I repeated this until i gave up and I reported this as an issue to itunes. When i tried again it worked and i thought maybe the problem had fixed itself, but i tried to add a CD to my ipod a few days ago and it only synced half of the songs. Now when i try to sync the leftover songs an error box pops up saying "The iPod (name of ipod) cannot be synced. Required file not found."
Some songs will sync perfectly normal, some load but disappear, some eventually just sync, and some won't sync at all. Has anyone had this problem/ can anyone help SOLVE it? please and thank you!!!

Try this:
Let your iPod charge up.
Attempt to sync a large play list.
When the iPod shuts down and you get the error message, quickly click through the dialog boxes on iTunes so when the iPod comes back up iTunes will attempt to sync again.
When the sync starts again after the iPod reboot, click the little X in the bar that shows how many tracks have been loaded. This will stop the sync and you'll be able to eject your iPod.
After it's been ejected, unplug the connector from the iPod and see what happens to the battery indicator. Mine goes down to almost gone and red - then after a few minutes it comes up to about 2/3 strength - but it should be full after being fully charged and just syncing a few hundred tracks.

Cannot Sync, Required file not found!

Plz help. I just updated itunes and now when i plug in my ipod, it wont sync,it says, "The ipod "name withheld's ipod" cannot sync. required file not found."

It's possible that the iPod Photo Cache folder on your computer, which is created from syncing photos to your iPod, is interfering with the syncing.
Try deleting the folder from your computer. See this for details:
Photo Sync creates iPod photo Cache
Then, try resyncing your iPod with your computer, and see if it is sucessful or not.
-Kylene

Ipod cannot sync file not found

Itunes will not sync ipod. it says "ipod mickey cannot sync, required file not found." but it is showing my ipod in itunes. can anyone help?

That can sometimes be caused by a damaged ipod photo cache.
If you remove the current ipod photo cache, does that get you past the error?
For instructions on where to find it, see the following document:
iTunes: Understanding the iPod Photo Cache folder

Error:"Add on executable file not found"

hi
How to solve
"Error:"Add on executable file not found"" while adding add ons in sap b1
Edited by: Philip Eller on Jun 16, 2008 10:13 AM
Edited by: Philip Eller on Jun 30, 2008 10:02 AM*

Hello Neetu,
Are you installing the XLR? if yes, when choose SQL server, please
Type a wrong servername first, then you will be able to get to an advanced
dialogue. Enter the correct name with username and password and then go on
to see if it works.
Kind Regards,
Maggie Zheng
SAP Business One Forum Team

After updating, install error "Install Flash Player.exe - Entry point not found"

My current version of Flash Player is: 11.1.102.55. Then after an Update is performed and the download is downloaded, then it tries to install the download and an error message occurs. The error message says - Install Flash Player.exe - Entry point not found - then it says The procedure entry point SetDllDirectoryW could not be located in the dynamic link library KERNAL32.dll.
When I try to uninstall Flash Player I get the same error message above except that it says Uninstall_Flash_Player.exe instead of Install Flash Player.exe.
I'm running WIN2000, my current version of Flash Player is 11.1.102.55 and I’m running Firefox version 12.0.

I believe 10.1.102.64 was the last supported version of Flash Player for Win2k. That being said, there have been numerous users that have been able to work around the error you are receiving. Please see this post for details:
http://forums.adobe.com/message/4218334#4218334

Cannot execute FlexUnit Test in Flash Builder 4.7 - File not found: FlexUnitApplication.swf

Similar Messages

Maybe you are looking for