Cannot execute report over portal  (WWC-51000)

Hello forum,
i created a report in the report builder and then i tried to deploy it into our 10g AS Portal (new installation with one infrastructure machine and one portal machine). I registered the reports server and created report definition file access to this file. machine. I try to run the report over the "run as portlet" -link and i get following error message:
The preference path does not exist: ORACLE.WEBVIEW.PARAMETERS.1109700064110 (WWC-51000)
if i try to execute the report over the "run"-link in the RDF-Access section i see following error message:
The requested URL /pls/portal/testprovider.RPT_testreport.show was not found on this server.
I placed the rdf-file in the reports/samples/demo directory of our portal instance machine. So what is wrong here , is the reports server wrongly configured? but where?
thanks for your help!!
katharina

Hi Jaya,
Have you got yot web template in an iview?  Do you get an error when trting to access it form the portal?
Cheers,
Nick

Similar Messages

  • Error while Executing reports in Portal

    Hello All,
    We are facing the following Error message while running reports in Portal.
    We have recently updated the EP Patch to 17..  since then we are facing the issue.
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    com/sap/portal/services/api/connectorgateway/IConnectorGatewayService
    Log ID
    001A4B0717C8005E0000014900002E07000498168CA315E3
    While checking the KM Content, we are getting the following error:
    Runtime Error
    An exception occured while processing the request.
    Additional information: com/sapportals/wcm/util/uri/RID
    Exception ID = 7004f63e-daf3-2d10-689e-add88da33d97      Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 06:27_27/12/10_0014_49226950
    Refer to the log file for details about this exception.

    Hi Sneha,
    Please check the default trace log file in NWA. Also verify that BI System and portal system should be same SP level.
    If there is any mismatch in the SP level then issue might comes. So check SP level for Bi and Portal.
    Regards, Arun Jaiswal

  • Error in executing report in portal

    Dear all,
    From the query designer while  am  executing the report in the portal,
    the pop showing the web application will therefore be ended,
    If i try to allow temporary not resulting screen showing no results,
    am executing report from multiprovider,which is combine from 3 cube 2 DSO having data around 10000 records,
    But when i executin in the portal "No data avaialabale"
    even i tried either by directly entering a URL in the address row of the Web browser or by navigating to another site in the SAP Enterprise Portal also does not giving the diffrence,
    plz clarify...

    Hi,
    I dont have CKF and RKF but am used filter as charecteristic restriction,
    should i know bcoz of these filter only ,am not getting data in Portal?
    if yes wat is the logic behind to be caused like this?
    i can able to enter in portal and i able to see the content,   but i cant able to see the data even i have lakes of data in my datatargets,....
    could u explain in detail?

  • Executing report in portal

    Hi,
    My requirement is to execute a Z report in MSS. When manager execute this the output should be obtained for only the direct reports of the manager. How can this be acheived?
    It will be great if manager can select from a selection screen which employees report should be displayed.
    Please advice.
    Thanks!

    Hi SasidharG
    Please run the support desktool in its latest version 77.... and then look at the systeminfo.txt file that the tool produces... this is an automated report designed by SAP development to run through all areas of portal/bi connectivity issues on a users portal and to provide remedies to any issues found. (Please see note: 937697) this does involve a bit of work at the outset but it is a very valuable tool which will enable you to fine turn your bi/portal connectivity.
    best regards
    Orla.

  • Issue while executing report in Portal

    Hi All,
    We have come across a typical error in the portal while the user access her reports .When ever user is clicking on the report
    in the portal a total blank screen( or white screen rather )  is visible and they have to log out and log in very frequently.We have suggested them to clear their cache in their desktops  to avoid this situation ,  but they are complaining that this blank screen is coming very frequently now. Does this have any thing to do with the reports. We dont have authorizations for this application currently and they are pretty straight forward ones and with not many CKFs/RKFs .Also we have went live in jan 2010 for this application and there is very limited data in the cube as well ,
    Any of your suggestions and appreciated in this regard,
    Regards,
    Sasidhar Gunturu

    Hi SasidharG
    Please run the support desktool in its latest version 77.... and then look at the systeminfo.txt file that the tool produces... this is an automated report designed by SAP development to run through all areas of portal/bi connectivity issues on a users portal and to provide remedies to any issues found. (Please see note: 937697) this does involve a bit of work at the outset but it is a very valuable tool which will enable you to fine turn your bi/portal connectivity.
    best regards
    Orla.

  • Authorization problem to execute a report through portal

    Hi All,
    One of user while trying to execute report through portal, getting error message saying that
    "you are not authorized to execute the report XXXXXXX'
    Can not load query <query name> (data provider <data provider name> No authorizations for requested service.
    The report is a web template which is getting executed through portal.
    User is having all the authorizations to execute the report(report autho as well as infoprovider autho also)
    we have regenerated the user roles , done user comparision....every thing is OK.
    Still unable to execute the report.
    Please advice what can be done in this case....
    Regards

    Hi Shaik,
    Are you able to run this report with your user id?
    If so check the role or authorization objects which are missing to the user.
    And also check whether he got portal roles assigned to his profile.
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on May 12, 2009 2:06 PM

  • WWC-51000 - Portal Error When Trying to Edit Menu

    I upgrade Webdb2.2 to Portal 30982 When I edit the menu and go to 'Menu Customization Form Text' I get:
    Failed to insert menu My Menu (WWV-15100)
    The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
    The link it is trying to execute is:
    http://hotsname:7778/pls/webdb3/WEBDB.wwv_menu_build.accept
    What's the problem
    PORTAL ERROR WHEN I TRY TO EDIT MENU WWC-51000

    When I create a menu, I can go through the steps but when I get to the FINISH button I get:
    The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
    The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
    The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)

  • Webi Reports failing -Cannot execute empty query

    Intermittent problem affecting all Webi reports in the SAP BI system .
    This affects all Release 1 and Release 2 Webi reports
    When the user tries to run the report, an error message appears with the message "Cannot  execute empty query. (QTJ00521)"
    User can close the report and try to run it again - the report may execute properly the second time.
    This problem started in production at R2 go live. It is affecting both R1 and R2 webi reports.
    It cannot be reproduced in lower environments.

    Hi,
    Check attached SAP note if this is relevant for your issue.As per this SAP note this happens when query stripping option is checked.If this is checked then uncheck and try.
    1936256 - Error "Cannot execute empty query. (QTJ 00521)(WIS 00000)" when refreshing Web Intelligence report
    Amit

  • Crystal Reports and Portal..... PLEASE HELP !!!!!

    I am trying to create a URL link to http://{ipaddress}/Recrystallize/Oracle/volvotest.rpt?init=java&user0=myusername&password0=mypassword
    When I put the above link into the browser...ON THE PORTAL SERVER....it executes as expected....
    when placed in a portal url component....i get:
    Error:
    Either the URL is malformed or the target server could be down (WWV-13054)
    The preference path does not exist: ORACLE.WEBVIEW.PARAMETERS.1757670568 (WWC-51000)
    The preference path does not exist: ORACLE.WEBVIEW.PARAMETERS.1757670568 (WWC-51000)
    I need to get this resolved ASAP any help would or ideas would be greatly appreciated.
    Also, if anyone has implemented Crystal Reports into an Oracle Portal portlet....would be extremely interested in talking to you. Thanks.

    Edit the url component created, and uncheck the option of showing the customization parameters in the porlet.
    Meaning that, the url component should be created with the maximum customization allowed is
    "Display name of the component" and not the url.

  • Portal Runtime Error while accessing BW reports through portal

    Hi,
    We are facing portal runtime error(An exception occurred while processing your request. Please send the exception id to your portal administrator) while accessing BI reports through portal frequently.
    We are unable to trace the error in the 'default trace' log file and although refreshing the cache solves this issue, it is difficult to explain this to every user individually.
    After many such errors, We found one log entry, which we are now not yet sure if it is relevant. The error states:
    1.
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;&lt;BWLauncherComponent[PORTAL_URL]&gt;;jsessionid=&lt;Request.JSessionID&gt;?sap-ext-sid=&lt;ID[url_ENCODE]&gt;&amp;Language=&lt;Request.Language&gt;&amp;theme=&lt;LAF.Theme[url_ENCODE]&gt;&amp;sap-lafversions=&lt;LAF.AllVersions[url_ENCODE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;Report&gt;&amp;&lt;BusinessParameters&gt;&#39;; the problem occured at position 230. Cannot process expression &lt;LAF.AllVersions&gt;
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:540)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:423)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Content pass of Application Integrator failed.
    Component Name:       'com.sap.portal.appintegrator.sap.BWReport',
    Context Name (iView):  <iview name location>
    Top Layer:            'BWReport/TopLayer',
    Producer ID (FPN):    'null',
    System Alias:         'Sap_bw',
    2.
    The cluster server element 111111 is not added in the EP cluster context,
       because prtbridge on 111111 is stopped  or not yet started (maybe the server is starting or shuting down).
    Please suggest us if the above logs are related to the issue or not
    Kindly provide us any inputs or solutions.

    Hi All,
    We are also having similiar type of error in our portal. 
    com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge
    #######SAPEngine_System_Thread[impl:5]_13##0#0#Error#1#/System/Server#Plain###
    The cluster server element 125898350 is not added in the EP cluster context,
       because prtbridge on 125898350 is stopped  or not yet started
    (maybe the server is starting or shuting down).
    We have implemented the FPN using RRA.
    This error comes only for few users when they navigate in Portal. After clearing the cache, it works for all. Kindly help us to resolve this issue.
    Regards,
    Venkatesh

  • "cannot execute" error

    Hi -
    I know that you can get a "cannot execute" error when trying to run a SPARC binary on an x86 system or vice versa.
    However, we have a customer reporting this error when running our SPARC binary on his SPARC system. Both systems are running Solaris 10, but have different processors and different Update levels.
    The binary is a 32-bit:
    starlic-admin: ELF 32-bit MSB executable SPARC32PLUS Version 1, V8+ Required,
    built on our system, which is a SunBlade 1500 (UltraSPARC) system running Solaris 10 Update 7, I believe:
    uname -a
    SunOS host 5.10 Generic_139555-08 sun4u sparc SUNW,Sun-Blade-1500
    The customer is using a Fujitsu-Siemens SPARC system with Solaris 10 Update 3 (as near as I can tell):
    SunOS host1 5.10 Generic_125100-10 sun4us sparc FJSV,GPUZC-M
    Should the difference in processors make a difference? Or the difference in Update levels? Is there some different way I should be building our binaries so they will run on the end user's system?
    I am puzzled by the error - the customer also has a Solaris x86 machine (where he initially tried installing our software) so there is a possibility that he accidentally went back to the original machine, but I think that unlikely.

    Using an older version of our product (built on Solaris 8 with a pretty old version of the Sun C/C++ compiler (Sun Studio 8) worked. Luckily there have been no major changes in our product, so it's OK for this customer to run an older version, but I'm still trying to figure this out for future support.
    The old binaries are built as ELF 32-bit MSB dynamic lib SPARC Version 1.
    I built hello.c on our Solaris 10 update 7 system in a bunch of ways (e.g. with xarch=v7, etc), and tried building both with the old compiler from Sun Studio 8 (which we still have installed) and with Sun Studio 12u1:
    /opt/SUNWspro/bin/cc hello.c -o oldv1
    /opt/SUNWspro/bin/cc -xarch=v8plus hello.c -o oldv8plus
    cc -xarch=v7 -o v7 hello.c
    cc -xarch=v8 -o v8 hello.c
    cc -xarch=generic -o generic hello.c
    cc -xarch=sparc -o sparc hello.c
    cc -xarch=v8plus -o v8plus hello.c
    (oldv1: ELF 32-bit MSB executable SPARC Version 1)
    ( /usr/bin/cc -> /opt/sunstudio12.1/bin/cc)
    and the customer gets the "can't execute" error for all of them - i.e. I can't figure out any way on our current system to build a binary that runs for this user.
    So I'm thinking it's OS level rather than processor type. But I don't want to even suggest that the customer upgrade his OS unless I am 100% positive that it will resolve anything (and that it's the only solution).
    Over in the HP-UX world, whenever there is an upgrade to a new version of the HP aCC compiler, there is a corresponding system patch for just the C and C++ runtimes - i.e. there is a single patch that you can specify in your end user system requirements. Perhaps there is something similar on Solaris? Guess it's time to dig deep into the documentation...

  • Error message in BW Report through Portal

    Friends,
    I really need your help to remove the waring message.
    For the purpose of changing the description on the Selection screen from “Cost Cetnters (Authorised Values)” to “Funds Centers” I had changed the ZCCTRATI variable description to Funds Centers
    Issue:
    When we open the old report we see the following information message.
    " Value if variable ZCCTRAT1 is automatically converted
    I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
    Can u help me how to remove this ?

    Bhanu,
      Thanks for u r reply.This warning message appears every time i execute the report through portal.
    Any idea ?
    Regards
    Mano

  • Data Federator:  Insufficient memory : Operator 'HashJoin' cannot execute

    Hi,
    I'm using: SAP BusinessObjects Data Federator Designer XI 3.0 Service Pack 3 - 12.3.0.0 (Build 1011241842)
    I have a virtual view on top of sql server 2007 and teradata.  I am using a view on sql server 2007 that joins against several tables and querying a single table from Teradata.
    When I try to query the view I get the error:  [Data Federator Driver] [Server] Insufficient memory : Operator 'HashJoin' cannot execute because it cannot allocate the minimal number of memory pages. Please contact the system administrator to change system parameter settings. (0)
    This happens when I try to query the view from data federator or from an odbc connection.
    I tried playing with the configuration settings for core.queryEngine.hash.maxPartitions  and
    core.queryEngine.hashJoin.nbPartitions  and nothing seemed to work in terms of changing/increasing the numbers.  The help guide also gave no help:  http://help.sap.com/businessobject/product_guides/boexi3SP3/en/xi3_sp3_df_userguide_en.pdf
    I was using a very similiar query against a materialized view on Oracle and Teradata before and that worked.  But I'd prefer not to have to materialize the view in Sql Server.
    Any thoughts as to how this can be fixed?
    Thanks,
    Kerby

    <rant>The strange thing with this forum is no people, really no people, ever do anything to resolve their own problems, even though this forum has a search function, and sites with FAQs and assistance are floating around over the Internet. Why is a mystery, as nobody uses them, and most DBAs only know how to hit copy-and paste, to add to the clutter on OTN again.</rant>
    The usual steps to troubleshoot an ora-1031 apply.
    This means
    - verify whether the local administrator is in the ora_dba group and sqlnet.authentication_services in sqlnet.ora has been set to (NTS)
    - in absence of these, there should a password file be present in %ORACLE_HOME%\database, named pw%SID%.ora
    These belong to the common documented requirements, and these requirements shouldn't be repeated everywhere.
    Sybrand Bakker
    Senior Oracle DBA
    Experts: Those who do read documentation.

  • SAP GRC RAR 5.3 SP9 "Cannot execute BAPI UserList"

    Hi everyone,
    After upgrading to 5.3 SP9, my client started experiencing some problems with RAR. I doubt it's linked to the upgrade, since I did all the testing and results were as expected. The problem is as follows:
    Using RAR, for only one specific system (SAP ECC6 box), when running foreground AND background analysis for USERS, all analysis fails with the following error log (see below message). All ROLE analysis work as expected (SOD and critical actions/autorisations).
    In the configuration tab, the connexion test is successful. I did some testing with a BASIS from the client and we identified that when running a successful analysis, we could log a RFC connection to the backend system (dont recall the transaction used though). When the analysis failed, no connexion was logged.
    The client's GRC admin opened a ticket with SAP, but I was wondering if the collective knowledge of SDN could maybe help us identify the cause of our problems.
    Any solution path is welcome
    Kind regards
    Jerome Fortin
    ========================================================================================
    Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
    INFO: Foreground : Analysis starts: XL1360
    Jan 18, 2010 2:19:09 PM com.virsa.cc.comp.VirsaXSR3_01Interface execute
    WARNING: VIRSAXSR3_01: Cannot execute BAPI UserList
    java.lang.ArrayIndexOutOfBoundsException
         at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:10211)
         at com.sap.aii.proxy.framework.core.JcoBaseTypeData.getElementValue(JcoBaseTypeData.java:503)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.getRelatedModelObjects(DynamicRFCModelClass.java:787)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.addRelatedModelObject(DynamicRFCModelClass.java:821)
         at com.virsa.cc.common.ModelNodeUtil._copyNodeTreeToModel(ModelNodeUtil.java:68)
         at com.virsa.cc.common.ModelNodeUtil.copyNodeTreeToModel(ModelNodeUtil.java:52)
         at com.virsa.cc.comp.VirsaXSR3_01Interface.execute(VirsaXSR3_01Interface.java:267)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface.execute(InternalVirsaXSR3_01Interface.java:1341)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface$External.execute(InternalVirsaXSR3_01Interface.java:1376)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3415)
         at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:409)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:302)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
         at com.virsa.cc.comp.BackendAccessInterface.searchUser(BackendAccessInterface.java:758)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.searchUser(InternalBackendAccessInterface.java:4279)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.searchUser(InternalBackendAccessInterface.java:4748)
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:548)
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
         at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:702)
         at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:121)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
         at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
         at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
         at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.meng.MatchingEngine matchActRisks
    WARNING:  Error :
    com.virsa.cc.dataextractor.dao.DataExtractorException: Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551)
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
         at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:702)
         at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:121)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
         at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
         at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
         at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
    WARNING: Foreground : Failed to run Risk Analysis
    java.lang.Exception: Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log
         at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:127)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
         at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
         at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
         at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Yes, I am aware there might be an issue with the BAPI USER list execution, it is pretty excplicit in the message.
    I was wondering if anyone has seen this error before and if someone can help me trace the source of the error. A message was already open with SAP before christmas and no solution was identified at the moment.
    Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551) at
    This can be translated to: Cannot extract data from the system P01, for more information look at the log file xxxx..
    Edited by: Jerome Fortin on Jan 19, 2010 9:15 AM

  • Cannot execute Install for database ORACLE_HOME

    Dear ALl,
    EBS 11.5.9 with Windows 2003, during multi-node installation error.
    log file
    Oracle Applications Rapid Install Wizard Install log
    >> Using Rapid Wizard Version : 11.5.9.21
    >> Install session started : Fri Jul 25 17:41:05 GST 2008
    >> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
    >> Command Line arguments for this execution :
    =================================================================
    Install Session Information
    Host Name : sysd.apps.com
    Host Operating System : Windows 2000
    User running Install : applmgr
    =================================================================
    InstUpgPanel - User chooses to Install Oracle Applications
    NumNodesPanel - Multi-node Selected
    SIDSeedPanel - The PROD database is set to PROD fresh install database
    ProductPanel - The following are the selected Product Groups for instance PROD
    Basic
    E-Business Intelligence
    Marketing
    TeleSales
    Field Sales
    Order Management
    Inventory Management
    Purchasing
    Discrete Manufacturing
    Process Manufacturing
    TeleService
    Service Contracts
    Project Costing
    Project Billing
    Financials
    Human Resources
    ProductPanel - The following are the selected Product for instance PROD
    0
    160
    190
    265
    601
    174
    175
    690
    874
    709
    454
    452
    450
    558
    451
    530
    517
    520
    549
    670
    691
    882
    521
    676
    880
    696
    697
    660
    522
    544
    869
    676
    279
    697
    660
    702
    401
    665
    673
    401
    665
    201
    202
    250
    401
    702
    703
    704
    705
    706
    712
    550
    551
    552
    553
    554
    555
    556
    557
    514
    511
    542
    862
    696
    872
    170
    866
    518
    515
    510
    870
    524
    542
    275
    275
    101
    140
    200
    222
    240
    260
    600
    8400
    8401
    8450
    8901
    231
    673
    800
    804
    8301
    8302
    TerritoryPanel - The following are the selected settings for instance PROD
    LanguagePanel - The following are the selections from the Language Panel:
    US - American_English
    US - American_English
    US7ASCII
    US7ASCII
    AMERICA
    MultiNodePanel - Selected nodes:
    [Ljava.lang.String;@eddac
    [Ljava.lang.String;@7b7565
    [[Z@583cf4
    QuickPanel - Empty Fields were encountered. Number of empty Fields:1
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    C:\mksnt
    C:\VC98
    C:\java\jdk1.3.1
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    C:\mksnt
    C:\VC98
    C:\java\jdk1.3.1
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    SettingsPanel - The following are the selected settings for instance PROD
    PROD
    PROD
    US7ASCII
    AMERICA
    1521
    1626
    7000
    8000
    8100
    8200
    8800
    9000
    9100
    9200
    9300
    9800
    10000
    10100
    10200
    10300
    16000-16009
    17000-17009
    18000-18019
    19000-19009
    AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
    ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
    ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
    Port Availability Check :
    Database Port Value = 1521...... Available
    Operating System Check
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\applmgr\Application Data
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=SYSD
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DISPLAY=:0.0
    HOME=C:\Documents and Settings\applmgr
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\applmgr
    include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
    lib=D:\VC98\mfc\lib;D:\VC98\lib
    LOGONSERVER=\\SYSD
    MSDevDir=D:\VC98\MSDev98
    NUMBER_OF_PROCESSORS=16
    NUTCROOT=D:\MKS
    OS=Windows_NT
    Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f0b
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    ROOTDIR=D:\MKS
    SESSIONNAME=Console
    SHELL=D:\MKS\mksnt\sh.exe
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TERM=nutc
    TERMCAP=D:\MKS\etc\termcap
    TERMINFO=D:\MKS\usr\lib\terminfo
    TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    USERDOMAIN=SYSD
    USERNAME=applmgr
    USERPROFILE=C:\Documents and Settings\applmgr
    windir=C:\WINDOWS
    Operating System patch/version test has suceeded
    Port Uniqueness Check :
    All ports are unique.
    File System Check :
    Database ORACLE_HOME created:
    Mount Point = e:\oracle\proddb\9.2.0
    Database ORACLE_HOME admin folder created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil
    Database ORACLE_HOME temp folder created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
    Database Install Log Directory created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
    Database System File Directory created:
    Mount Point = f:\oracle\proddata
    Database Log File Directory available:
    Mount Point = f:\oracle\proddata
    Database Data File Directory available:
    Mount Point = f:\oracle\proddata
    Database Index File Directory available:
    Mount Point = f:\oracle\proddata
    File Space Check :
    Disk space on system acceptable :
    Database ORACLE_HOME = e:\oracle\proddb\9.2.0
    required = 2381.0
    actual = 102323.203125
    Disk space on system acceptable :
    Database System File Directory = f:\oracle\proddata
    required = 9259.0
    actual = 457021.93359375
    Disk space on system acceptable :
    Database Log File Directory = f:\oracle\proddata
    required = 49.0
    actual = 447762.93359375
    Disk space on system acceptable :
    Database Data File Directory = f:\oracle\proddata
    required = 8175.0
    actual = 447713.93359375
    Disk space on system acceptable :
    Database Index File Directory = f:\oracle\proddata
    required = 6532.0
    actual = 439538.93359375
    Host/Domain Check :
    command : ping -n 1 sysd
    Pinging sysd [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysd.apps.com
    Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host.domain ping has suceeded
    command : ping -n 1 sysm
    Pinging sysm [192.168.6.17] with 32 bytes of data:
    Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.17:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysm.apps.com
    Ping request could not find host sysm.apps.com. Please check the name and try again.
    Error - host.domain ping has returned an error: 1
    System variable PATH set to:
    C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    System Utilities Check :
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    d:\MKS\mksnt/cc.exe
    'cc' is available.
    D:\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has suceeded
    JDK Availability Check :
    running command : CheckerClass.JDKCheck()
    JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    appsa.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    SettingsPanel - The following are the selected settings for instance PROD
    PROD
    PROD
    US7ASCII
    AMERICA
    1521
    1626
    7000
    8000
    8100
    8200
    8800
    9000
    9100
    9200
    9300
    9800
    10000
    10100
    10200
    10300
    16000-16009
    17000-17009
    18000-18019
    19000-19009
    AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
    ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
    ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
    Port Availability Check :
    Database Port Value = 1521...... Available
    Operating System Check
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\applmgr\Application Data
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=SYSD
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DISPLAY=:0.0
    HOME=C:\Documents and Settings\applmgr
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\applmgr
    include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
    lib=D:\VC98\mfc\lib;D:\VC98\lib
    LOGONSERVER=\\SYSD
    MSDevDir=D:\VC98\MSDev98
    NUMBER_OF_PROCESSORS=16
    NUTCROOT=D:\MKS
    OS=Windows_NT
    Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f0b
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    ROOTDIR=D:\MKS
    SESSIONNAME=Console
    SHELL=D:\MKS\mksnt\sh.exe
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TERM=nutc
    TERMCAP=D:\MKS\etc\termcap
    TERMINFO=D:\MKS\usr\lib\terminfo
    TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    USERDOMAIN=SYSD
    USERNAME=applmgr
    USERPROFILE=C:\Documents and Settings\applmgr
    windir=C:\WINDOWS
    Operating System patch/version test has suceeded
    Port Uniqueness Check :
    All ports are unique.
    File System Check :
    Database ORACLE_HOME available:
    Mount Point = e:\oracle\proddb\9.2.0
    Database ORACLE_HOME admin folder available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil
    Database ORACLE_HOME temp folder available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
    Database Install Log Directory available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
    Database System File Directory available:
    Mount Point = f:\oracle\proddata
    Database Log File Directory available:
    Mount Point = f:\oracle\proddata
    Database Data File Directory available:
    Mount Point = f:\oracle\proddata
    Database Index File Directory available:
    Mount Point = f:\oracle\proddata
    File Space Check :
    Disk space on system acceptable :
    Database ORACLE_HOME = e:\oracle\proddb\9.2.0
    required = 2381.0
    actual = 102323.203125
    Disk space on system acceptable :
    Database System File Directory = f:\oracle\proddata
    required = 9259.0
    actual = 457021.93359375
    Disk space on system acceptable :
    Database Log File Directory = f:\oracle\proddata
    required = 49.0
    actual = 447762.93359375
    Disk space on system acceptable :
    Database Data File Directory = f:\oracle\proddata
    required = 8175.0
    actual = 447713.93359375
    Disk space on system acceptable :
    Database Index File Directory = f:\oracle\proddata
    required = 6532.0
    actual = 439538.93359375
    Host/Domain Check :
    command : ping -n 1 sysd
    Pinging sysd [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysd.apps.com
    Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host.domain ping has suceeded
    command : ping -n 1 sysm
    Pinging sysm [192.168.6.17] with 32 bytes of data:
    Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.17:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysm.appsa.com
    Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
    Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
    Ping statistics for 208.87.33.150:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 295ms, Maximum = 295ms, Average = 295ms
    host.domain ping has suceeded
    System Utilities Check :
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    d:\MKS\mksnt/cc.exe
    'cc' is available.
    D:\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has suceeded
    JDK Availability Check :
    running command : CheckerClass.JDKCheck()
    JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
    DoInstallPanel - Summary Text
    The Rapid Install Wizard will now install the following:
    Install Oracle 9i technology stack for PROD.
    Install Oracle Applications Database Seed for PROD.
    DoInstallPanel - User continued install at warning dialog.
    DoInstallPanel - Beginning install for all users.
    Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
    RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
    Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
    APPL_TOP location: e:\oracle\prodappl
    Database ORACLE_HOME: e:\oracle\proddb\9.2.0
    Database SID: PROD
    Database Context Name : PROD_sysd
    Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Total number of processes in Current Install 3
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
    "Database ORACLE_HOME installation succeeded"
    e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
    Please specify valid number of threads. [1-12]
    usage:
    java oracle.apps.ad.autoconfig.InstantiateFile
    -e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
    [-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
    [-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
    java oracle.apps.ad.autoconfig.InstantiateFile
    -name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
    java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
    where:
    ENV_FILE = Applications Context file to provide replacement vars
    INST_DRV = Instantion File Driver to define templates to be instantiated
    TEMPLATE = Template to be instantiated
    LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
    BACKDIR = The directory for backing up previous templates
    (default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
    OUTFILE = Output file
    PASSWORD = APPS password
    VAR_NAME = A variable name to be replaced
    VAR_VALUE = The value pair to VAR_NAME
    NUMBER = Number of threads to be used in the zip action. Range [1-20]
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
    Please specify valid number of threads. [1-12]
    usage:
    java oracle.apps.ad.autoconfig.InstantiateFile
    -e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
    [-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
    [-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
    java oracle.apps.ad.autoconfig.InstantiateFile
    -name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
    java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
    where:
    ENV_FILE = Applications Context file to provide replacement vars
    INST_DRV = Instantion File Driver to define templates to be instantiated
    TEMPLATE = Template to be instantiated
    LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
    BACKDIR = The directory for backing up previous templates
    (default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
    OUTFILE = Output file
    PASSWORD = APPS password
    VAR_NAME = A variable name to be replaced
    VAR_VALUE = The value pair to VAR_NAME
    NUMBER = Number of threads to be used in the zip action. Range [1-20]
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Please guide.

    Hi,
    Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    ------------------------------------------

Maybe you are looking for

  • IPod reset utility incompatible with just about anything

    Hi, Running iTunes 9. 2nd generation shuttle says "you must restore this iPod with reset utility". Have the latest version of the reset utility, 1.04 - NOT compatible with Vista or Windows 7 - NOT compatible with 64-bit OS So I suddenly have a useles

  • Unknown Error (1418), iPod 3rd Generation help please!

    So I bought a fantastic old school retro iPod 3rd Generation and I love it! It plays fine, syncs music and all, but only through USB 2.0 (and doesn't charge!). It takes iTunes ages to recognize the iPod with Firewire. And I wish it would be quicker!

  • Corrupt blocks with RH6.2 and 8.1.7

    Hi We have following problem: while running Oracle 8.1.7 on a Compqa DL580 with Smartarray controller 5304 on RedHat 6.2 system we encounter corrupt data blocks after a certain time. We can see corrupt data blocks e.g after reboot, but also during no

  • Jsp and error 500

    Hi all, I have a problem with my jsp, when i try to load my jsp i 've got an error 500 like this : Error: 500 Location: /kimdog/jsp/liste_diff.jsp Erreur Interne de Servlet: org.apache.jasper.compiler.ParseException: C:\jakarta-tomcat\kimdog\jsp\list

  • Green button not working

    Apart from the obvious battery issues my green button has stopped working. i cant make calls or answer calls with it. the other day whilst taking a picture the red light on the camera came on and wouldn't go off either, so i had to remove the battery