Cannot exit recovery mode

Moved the AppleTV with 3.01 to use with another TV, but now it won't start anymore. It always goes to Recovery Mode after letting me choose language and resolution. Factory restore doesn't work, and the middle option says nothing's wrong. What shall I do?

remove all cables and leave them disconnected for 5 minutes.
connect and try a factory restore again.

Similar Messages

Entered test mode on dv6 pavilion win 7 x64 - cannot exit test mode after many attempts.

DV6 Pa,vilion laptop running win 7 x64 has experienced 301 imminent disk failure msg without any apparent real issues for past several days. System is only a year old. Entered Test Mode as part of diagnostic effort. Now, regardless of boot option select cannot exit Test Mode. Any resolution?????

Windows7 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&tmp_task=solveCategory&cc=us&dlc=en&lc...
If you didn't do so and now can't> create Recovery Disks you can order from HP for a small fee. You will need serial number to order> Guide to Finding System Info
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HT1212 My iPod is locked for 22 Million minutes and i cannot use recovery mode! Please Help!

My iPod is locked for 22 Million minutes and i cannot use recovery mode because my home button is broken and the screen doesn't respond to any touches or swipes. What should i do?

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

I upload my iPhone 4s and it went to recovery mode i have tried to exit recovery mode by pressing the home and the power bottom but it doesn't work what more can i do please help me

i upload my iPhone 4s and it went to recovery mode i have tried to exit recovery mode by pressing the home and the power bottom but it doesn't work what more can i do please help me

http://support.apple.com/kb/ht1808

How to exit recovery mode on iphone 4?

How do i EXIT recovery mode on iphone 4?
I wanted to update my moms iphone 4 to ios 7.
So i started the update and i didnt use the computer then i realized i didn't back up and it was installing it it was almost a half way so i wanted to exit that so i pressed both lockbutton and home button and then it showed me that i got to connect the iphone to itunes (recoverymode) and it says i have to restore.
I cant restore my mom will kill me!
She doesnt know what i have done.
I tried using tinyumbrella and recboot and it didnt work... i tried pressing home and lock buttons and it didnt work.
I dont know what to do please help me!!
If there is a way to save photos to computer while recovery mode that would be great! The photos are important!
Help!

no way to exit recovery mode sorry. you have to restore and setup as new unless you have a backup.
Peace, Clyde

How to exit recovery mode for ipod touch 4g

My ipod touch is stuck in recovery mode and so far, the only way to exit recovery mode is to restore it. I have not backed up my photos on the ipod because I usually charge it using a wall charger rather than connecting it to iTunes. There is over 4,000 priceless photos that I do NOT want to lose on that iPod. How do I exit recovery mode without restoring the iPod?

If this program will not get the iPod out of recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/you only options are:
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Contract with a data recovery company

HP6520 Cannot exit scan mode. Msg: scanning in operation

Up to this point, I have had no problems, but it seems like the scanner is stuck in scan mode and asks me to wait nuntil operation is complete.
G

Hi @Trolley,
Welcome to the HP Forums!
I understand that your HP Photosmart 6520 cannot exit scan mode, and you are getting the error, "scanning in operation". I am happy to help!
I would recommend the following:
Hard reset. Please see this post, How to perform a Hard Reset, by @Rich1.
Try plugging the printer's power cable directly into the wall outlet, not a surge protector!
Firmware update. Getting the Latest Firmware and Product Updates.
Hope this helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My admin login password was recently changed but I forgot it. I didn't get to shut off my mac, it entered sleep so now I cannot enter recovery mode.

I know it's a bad idea to change passwords when you're stressed but I changed my admin login password and promptly forgot it after 5 minutes (there was a big commotion in the background). The problem is that now I cannot enter recovery mode, I'm stuck with the user login screen. I can log in as a guest just fine, but I need access to my files on the Admin account.
Lastly, I also haven't linked my Apple ID to my AirBook, so that is out of the question too. What can I do to gain back control over my admin account, without wiping all my data? - Currently running OSX 10.9.4

Once I get into recovery mode, do I go through the migration set up process? Should I be logged out of my account on the old macbook before I set up the new one? I really thought I knew what I was doing but am seriously confused now.
Thank you.

3.1.2 Update Failure. Cannot escape recovery mode

I attempted to update my 3GS to 3.1.2 today but the installation failed and forced recovery mode (connect to itunes/usb screen).
I am running windows itunes 9.0.1.8 x64. I have uninstalled the drivers but windows cannot find the two drivers required, "No Driver Found". I have attempted to use the driver C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl64.inf but to no success. It seems to install but returns error "This device cannot start (code 10)".
I have reset the phone, restarted my computer, reinstalled itunes, cleared reg and more.
Any help is much appreciated.
Thanks

Hey I had this happen and found the fix, though admittedly some people may not be able to use it: I restored it on my other computer with an older version of the firmware. I don't know why but the firmware download seems to be screwing up the restore. Find a friend with an older version and make sure they don't upgrade, then use their PC to restore it. This is a common problem that Apple is denying, took it to the store and they couldn't get it working. IT seems to be very hit or miss, the guy in front of me could get his restored (his was a 3Gs, mine is 3G). I don't know if there is a way to uninstall the update, maybe go digging through your computer under the itunes files for downloads and delete it. Good luck!

IPhone won't exit recovery mode/ keeps saying "connect to iTunes"

I recently updated my iPhone 6 plus to iOS 8.2 everything was going fine, I was able to download the new iOS. I was updating the phone when suddenly iTunes informed me that I had to restore the phone in order for it to be updated. I gladly did. And then after a while, iTunes informed me again that the device could not be found (or something like that, "like the computer can't find the iPhone"). And it went into recovery mode. It just kept showing "connect to iTunes" on the screen. I have tried restaring and reseting the phone but it comes back to the "connect to iTunes" (even though it is connected) and when I try to restore it again, the same thing happens. It's stuck in recovery mode and I can't use the phone. What should I do?
A friend of mine told me that I should not have updated to iOS 8.2 right away because it still has some bugs (?). And that this is the reason why I couldn't get past the recovery mode. Is this true? Any insight would be highly appreciated. Thank you.

Ooops sorry about that. It must've been 8.1.2 then? I honestly don't remember.. I wasn't paying attention when I updated since I regularly do it for my iPad, other phones. Anyway, whatever is the latest version of the iOS, it got me stuck in recovery mode.
really sorry about the 8.2 Info

Can't exit Recovery Mode

Hello,
So 2 days ago I was charging my iPhone 5C, and after I plug it out from the charger, it showed me that it's on Recovery Mode...
I connect it on iTunes, clicked Restore iPhone, but in the end it pops up an error: "The iPhone could not be restored. An unknown error occured (9)."
What do I have to do?
Thank you.

Hello GDTS,
Thank you for the details of the issue you are experiencing with your iPhone 5c. I found an article with steps to take when getting specific errors when restoring an iPhone.
The following section addresses error 9:
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Find the full article here:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#9
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cannot access recovery mode - N

Just as the title says. Player will spuradically turn on and play but usually will not, in fact it rarely will play. And when it does, if I shut it off and try to turn it back on, it will not. However if I plug the player into the computer without holding the power button it will always work, with or without the battery. If I hold the power button while connecting the unit it will do nothing(I've held it for a full minute even)until I release it, and then it just comes up as a mass storage device. No new hardware, nothing. I've tried on the 4 desktop stations running various Windows versions and my one laptop and they all produce the same results. So basically I have a "thumb dri've" that requires a cable.
Any ideas? It seems there have been quite a few problems with the N200's and them acting a bit odd. And it also seems like they forgot recovery mode on my player unless there is something I am doing wrong.

drasticdesignz,
If recovery mode has been done before in the system, the new hardware wizard will not be prompting again. You can check this by having the player enter recovery mode via the usual steps and then go to device manager and see if the player are in recovery mode or Mass storage device mode.
Jason

Unable to exit Recovery Mode/Firmware Problem/Portable Device not detec

Well. A veritable catalogue of errors, to be fair.
In attempting to solve my truncated WMA file issue of yesterday, I decided to install the upgrade to MTP Firmware 2.00.2. It crashed during the transfer, but since my Micro's music library was wiped in the process (as promised), I concluded that the installation had, in fact, been successful.
However, WMP0 suddenly couldn't detect the Micro. No matter what I did. Ah, I thought, the Firmware installation didn't work after all. So, following the advice on this forum, I entered Recovery Mode and attempted to delete/reload the new Firmware via the recovery menu.
'Deleting Firmware', declared a little pop-up, chirpily. Then 'Update Firmware Now'. I tried re-running the Firmware update installer, but the Micro was still not detected. So I tried a reboot via the recovery menu, only to receive a 'Firmware Problem' message. I knew that. <EM>That's</EM> why I was trying to re-load the firmware. But how can I when the Micro isn't detected, and. . . . Vicious circle.
Please help. I have my Micro boxed and ready to send back to Amazon, but if there's a walk-through solution anyone can give me, I'd rather not return this little begger (I've become rather attached to it).
Regards, and thanks in advance.
JP

jonpaulfahy wrote:
Just spoken to Noel on the UK Support helpline, and he suggested restoring <EM>my PC</EM> back to yesterday's config in order to get it to recognise the Micro as a portable device. Only then will I be able to re-load the new firmware, and (hopefully) reboot the Micro successfully.Not entirely sure whether this will help, and seems to me to be a case of the tail wagging the dog.Anyway, I'll give it a try tonight and update this thread with the result.JP
I have the exact same problem and the agent on the line told me the exact same thing,it didn't work.

How can I exit recovery mode the easiest using a program?

I tried holding down the buttuons how you are suppose to on two different i touch's and it never worked. I need suggestions to a simple program to help get out of recovery mode.

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766

HT4528 exit recovery mode

how to exit recovery mode

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

Cannot exit recovery mode

Similar Messages

Maybe you are looking for