Cannot export a video from imovie because the original videos are deleted from the album
Hi,
I made a mistake. I have an iMovie project but I cannot anymore export the project, because I have deleted the original files.
However, I am able to play the video within iMovie by only playing it as "play full screen". If I try to play a video in the list of first page starting the imovie it would not play. A notification pops up saying "none of the missing videos were found. If the missing videos are on you computer, sync the videos to your device and relaunch iMovie." Although I already deleted my original videos..
So the movie seems to be somehow there.
Also before when I deleted my videos in album, I finished a step of uploading on youtube. But when I checked my youtube video menager, the video shows as it failed and unable to to convert video file.
Do you know a way of how I can export the movie again?
Thank you and best regards,
Kevin
Any luck?
I to have the very same issue and can not get it off my phone to view on a pc or similar ?
Similar Messages
-
Does deleting songs from my library mean that they are deleted from the cloud?
If I have 500 songs in my library and I delete 25 of them, will they stay in my itunes match? will I be able to listen to them anytime? or do I have to keep a huge library with all my songs in one computer?
ThanksYUP!
i guess i just had the fear of clicking delete. i started by deleting a track i dont like.. the download cloud link appeared.. and I am IN BUSINESS.
I am a very relieved man. I lost my entire library on a 64gb SD card that got damaged sticking out of my macbook air (PS - Bad design apple - the card shouldnt stick out so much).
BUT - Kudos apple and iTunes Match for saving 90% of my library. -
I deleted (to Trash) a segment of "raw footage" from an iMovie project that I did not want to delete.
I was able to retreive it from the Trash and move it to Finder, but I cannot figure out how to move it back to iMovie.
How do I do this (restore the video segment to the start of the project)?
Or, do I have to load the original video again from the camera?@ "Afterimages":
Well, yes, I suppose I could re-import the video. (LIkely ALL of it, dammit!)
So, unless I'm mistaken that would be the "long way" to resolving this issue.
I was able the take the deleted video out of the Trash and now it's in Finder. Why can't I simply re-insert it into iMovie where it orginally was? That would be the simple solution, just "click and drag", or something like that, correct? Maybe that's impossible? (In which case, I must ask, "Wouldn't the creators of iMovie have considered this "boo-boo" and done something to remedy it easily?" I doubt I'm the first vidiot to do this... -
I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B -
i am using a jvc video camera and i am trying to upload the videos to iMovie. when i click "upload on pc" on the camera,nothing shows up on iMovie. I clicked on "Import from camera" on iMovie but nothing came up. Just my webcam.
I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import. -
Description:
The following example account [email protected] is an on premise AD account being used as a shared mailbox in the cloud. We have discovered that regardless of what we do, not a single user can edit the calendar entries.
The following message is shown in Outlook Click to Run 2013 when an entry. "New appointment" button is also greyed out, including "Calendar Permissions" and some others.
This problem started when the shared mailbox was created wrongly by creating it in the cloud first and we had to delete it and start over. The "in the cloud" user was deleted and the same user was created in AD on-premise with the same account name
and then Dir Synced with the cloud. A license was assigned, a user mailbox on exchange online created and the type was converted to a shared mailbox and Editor rights were defined on the calendar folder for specific users.
Actions performed:
Action01: gave users Editor rights on calendar folder through powershell
Result01: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
Action02: Opened calendar with Outlook and tried to edit entries
Result02: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
Action03: Opened calendar with OWA of users
Result03: Users can edit the shared calendar on OWA
Action04: Gave users Full Access permission on mailbox with automapping on
Result04: Users can edit calendar in Outlook
Action05: Gave users Full Access permission on mailbox with automapping off (mailbox no longer visible in outlook)
Result05: Users cannot edit calendar in Outlook
Action06: Removed Full Access permission on mailbox for users
Result06: User cannot edit calendar in Outlook
Action07: Removed [email protected] from on-premise AD, performed dirsync, removed account from ms online using remove-msoluser -removefromrecyclebin
Result07: No trace of the account was anywhere to be found.
Action08: Created new [email protected] account on on-premise AD, assigned o365 license to user including exchange online license
Result08: New empty Exchange online mailbox was created
Action09: gave users Editor rights on calendar folder through powershell
Result09: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
(Note: whenever mailboxfolder permissions are modified for this mailbox it's as if they are ran THREE times in a row, the first time they are applied and the powershell gives immediately 3 exceptions behind this:
An existing permission entry was found for user: [email protected]
+ CategoryInfo : NotSpecified: (:) [Add-MailboxFolderPermission], UserAlreadyExis...nEntryException
+ FullyQualifiedErrorId : [Server=DBXPR05MB046,RequestId=3b3e080e-9aaf-4db9-9b90-b7171d59eba2,TimeStamp=7/11/2014
8:15:39] [FailureCategory=Cmdlet-UserAlreadyExistsInPermissionEntryException] 57078FCD,Microsoft.Exchange.Manageme
nt.StoreTasks.AddMailboxFolderPermission
+ PSComputerName : outlook.office365.com
Any other mailbox does not do this when setting mailboxfolder permissions)
Action10: Opened calendar with Outlook and tried to edit entries
Result10: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
Action11: Tried on a fresh new pc with first time logon
Result11: did not help
Additional information:
We have seen this problem with another user which was recreated, when he shares his calendar with others and people get the calendar invite email and click "Open Calendar" they receive a popup "The folder cannot be found".
My first impression points to a corruption/bug in the GAL on exchange online, since we're using o365 for midsize bussinesses we cannot use the AdressList role to expose the adresslist cmdlts for deeper troubleshooting.
PS:
Issue tested on different computers and with different user accounts, not a single user can edit the calendar of [email protected] when editor rights are given.
Noticed when editing rights for the shared mailbox in powershell after the first confirmation line
Office 2013 is click to run was updated to latest version, version number: 15.0.4659.1001Greetings Gil,
I haven't heard of that one.
Questions:
Does the calendar in question show up in the "Subscriptions" category of iCal?
If you remove all accounts from iCal > Preferences > Accounts and quit and re-open iCal, does the calendar in question vanish? If so, does the calendar come back when you re-input the servers you need into iCal > Preferences > Accounts?
Can you provide a screen shot of your calendar sidebar.
While you answer those questions, some troubleshooting to try:
Try dragging one of your other calendars above this calendar that won't delete and then quit / re-open iCal and attempt to delete the calendar in question.
Failing that:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
4. Launch iCal and test.
If the issue persists at this point:
Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Hope that helps! -
Is annotation for a hyperlink to another video is possible from the original video?
hi there,
i have been working on Adobe Presenter trail period for a while and thanks to adobe it's a tremendous help. i have a doubt- is it possible to hyperlink to another video from the original video.
i.e after creating a video i want to integrate another video into the original one through an annotation that will be displayed on the original video which provides a link for my second video.Thank you, Ian. That sub-menu is what eluded me all right. It certainly seems to me to be one way I can do this: using the Paste Formula Results sub-menu under Edit. But before I copy the cells as you say, I will have to take several prior steps.
In the new sheet I have to select the top left cell of the subject range and there enter "=". Then, in the original sheet, I must select the corresponding cell. Returning immediately to the new sheet, I need to drag the cell right to extend the formula to two adjoining two cells. Now I need to drag those three cells to extend the formula to the bottom of my table (quite a number of rows, but the number matches that of the original sheet). Only at this point am I in a position to apply your suggested method: that is, copy what's already selected and use Shift-Command-V to paste the formula's result throughout the range.
I feel sure that will do it. But if anyone has any further suggestion as to how this could be done less cumbersomely, I would be very happy to hear it before I embark on the task ahead - because that will have to be repeated for another 24 new sheets in a couple of files. Quite a lot of work.
So, whilst you've helped me materially, a question still remains as to whether some other method might be possible?
Regards,
Peter White -
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
Why is it on the photo app is that when you add your photos to new albums and when you are deleting from camera roll it will delete photos from everywhere so therefore once your photos are in the albums you have chosen you cannot delete from camera roll
Your photos are actually all in the Camera Roll. The album you create only contain pointers to these pictures. Albums are like music playlists; when you delete a song from the playlist it doesn't delete the song from your music library. But when you delete a song from your music library it will also be deleted from any playlists that it may have been in as well.
-
I use iMac, iPad and iPhone but also an HP laptop. I have used Macs since 1986 so I am not a novice. I set up my iCloud account, moving from MobileMe recently and everything works fine on my Apple devices. The bizarre thing is I can see all my e-mail accounts via iCloud in Outlook but the contacts and calendars are not syncing in Outlook even though the original calendar material came from Outlook (the contacts data is all from the iMac). I've tried all the obvious things and read most of the articles on the Apple Support website. All the relevant boxes are checked on the iCloud dashboard on each device but I just wondered if I was missing something obvious. I'm sure some of you will have had the same expereince and solved it. Can you help me?
Thanks in anticipation!
TI use iMac, iPad and iPhone but also an HP laptop. I have used Macs since 1986 so I am not a novice. I set up my iCloud account, moving from MobileMe recently and everything works fine on my Apple devices. The bizarre thing is I can see all my e-mail accounts via iCloud in Outlook but the contacts and calendars are not syncing in Outlook even though the original calendar material came from Outlook (the contacts data is all from the iMac). I've tried all the obvious things and read most of the articles on the Apple Support website. All the relevant boxes are checked on the iCloud dashboard on each device but I just wondered if I was missing something obvious. I'm sure some of you will have had the same expereince and solved it. Can you help me?
Thanks in anticipation!
T -
I have several keynote presentations that are missing their video clips. Does the original video clip need to stay on the camera roll after you embed it in the presentation? I thought not, because when you add a video, a message comes up saying "compressing video" before it gets added. That made me think that a special compressed version of the original video is made and saved along with the presentation. I've tried testing this by creating a new presentation, adding a video clip to it and then deleting the original video from the camera roll and the video clip in the presentation was not affected. You'd think if the clip were linked to a presentation, that iOS would warn you before you delete it from the camera roll. But I can't think of any other reason why the clips would suddenly be missing from all my keynote presentations.
You can do this with iMovie '06, but not with iMovie '08. You should have iMovie '06 still on your hard disk if you upgraded from iLife '06, or you can download it for free from Apple. Under Editing -> Video Effects, you will find the Fast/Slow/Reverse effect that will do this.
-
Why is the video in the preview af lower quality than the original video?
I have a question about the quality of the video seen in the preview. This is not as good as the original and also not as good as the original video seen with fe mediaplayer.
I already read some similar discussions and I have tried some things:
Starting a new project with other settings (PAL HD 1080i, 25fps), this does not help.
Rendering the video if necessary, this does also not help.
Some information:
The video's are from a PanasonicHDC-SDT750 full HD camera. Setting 1920HA.
Output files are MPEG imagesize 1920x1080, 25 fps, 48 kHz
Computer: Inte(R)l core (TM) i7-3632QM CPU 2.20 GHz 8 Gb RAM
AMD High definition audio devise
I hope this information is enough to help me, any help is surely appreciated.carla68
Thanks for the follow up. Let us go through the check list to make sure what you are seeing should be the best possible
1. Project preset....Based on the Panasonic HA setting, the camera should be expected to be recording 1080i (in your case, 1920 x 1080 @25 interlaced frames per second). Either you (manually) or the project (automatically) should be setting the project preset to match those video properties, using
PAL
AVCHD
Full 1080i25
When you import that source into the Expert workspace and drag it to the Timeline, there should be no colored line over its content indicating that the file needs to be Timeline rendered to get the best possible preview. In fact, with no colored line, if you press Render, you will get file playback and not Timeline render.
Are we OK on this so far.
2. Right click the Edit area monitor, select Playback Quality, and then compare the set for Automatic versus Highest.
3. Go to Edit Menu/Preferences/General and the option there
"Timeline render quality (valid for HD projects)" and determine if it is set for "High quality, Slow Speed". If not, set it to that choice.
4. The bitrate for your source is 17 Mbps. If you have exported
Publish+Share
Computer
MPEG2
with Presets = MPEG2 1920 x 1080i25 High Quality
you should be OK bitrate wise since the defaults for the preset are
Minimum 18 Mbps
Target 25 Mbps
Maximum 30 Mbps
Have you looked at the export of
Publish+Share
Computer
AVCHD
with Presets = MP4 - H.264 1920 x 1080p25?
5. Is your computer's video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Please review and consider the above.
Thank you.
ATR -
My icloud email messages disappear on all my devices after about a week and I cannot locate them - not in archive on icloud.
I use several devices to receive emails - imac, ipad, iphone and samsung galaxy note. I put all read emails to trash on samsung, ipad and iphone but keep on imac and wish to retain there for reference. All other accounts remain but icloud emails disappear. No devices say to delete from server. Can anyone please help?mazzaja wrote:
I put all read emails to trash on samsung, ipad and iphone but keep on imac and wish to retain there for reference. All other accounts remain but icloud emails disappear. No devices say to delete from server.
If this is your iCloud email account, whcn you delete an email from any of your devices, they are moved to the trash on all devices/computers, then the trash is automatically deleted after 30 days. That's how IMAP accounts work. You can't delete them from your device and keep it on the server because you are reading and deleting from the server itself.
If you want to keep them on your Mac, you'll need to move them to a folder rather than deleting them. When you do, they will be moved to the same folder on your other devices. -
How can I locate the original .CR2 / Raw file from Photos in finder?
How can I locate the original .CR2 / RAW file from Photos in the finder window? I would like to know a easier way to open my files and use them in Photoshop than having to go to the Pictures folder, right clicking "show packaged contents", and manually searching for my CR2's / RAW's. It is also ridiculous to have to export the RAW file to my desktop, and then take it into Photoshop or another photo editing program. I was able to do this in iPhoto and find I cannot do so in Photos. Please help? Can you please consider adding a right click function that says "Show Original file in Finder". That would make it so much easier and better for those of us who want a simple way to access the original files and use them in other editing programs. At least with iPhoto you could go to the top menu / preferences and find your items.
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback
Rather than use the 'Show package Contents route, the supported and safer way is to export the unmodfied original. -
Applying color corrections to the original video clips?
How do I apply the same colour corrections I have made to video clips in PremierPro CS5.5, to the original video clips? Is there a way to save the clips from PremierPro to apply the same changes to the original avchd clips?
You would have to export with the correction applied.
These become "Intermediates" -
Sounds out the original video start playing when I have muted them
In my video I set the volume of the original video to 0% and added a song for the entire edited video. When I play the video on big screen, on certain parts, it still plays the sounds of the original videos until I pause it and continue it. Even if I export the video the original sounds play through.Disturbing What can I do to get these sounds out of it entirely?
I would guess that you are using either fast motion or slow motion. There is a bug in iMovie 09 which makes random audio artifacts when you set the speed slider to anything other than 25%, 50%, 100%, 200%, 400%, 800% (i.e. the Presets with the tick marks).
If you choose another speed, like 139% or 58%, you will get tha audio problems.
Change your speed to one of the tick marks and that should solve the problem.
Maybe you are looking for
-
How do I copy one NAS drive to another, incrementally?
Hello - I have two 1tb Network Attached Storage devices on my Apple network. I'm unsure how to make one a backup copy of the other. Tools used for cloning the Macintosh HD to a backup device (like Carbon Copy, Super Duper, Time Machine, Apple backup
-
Estimate cost for water damaged iPod touch 2nd gen?
My iPod touch 2nd generation 8BG fell into water a month ago and doesn't turn on at all, sometimes a grey screen appears but thats all. Does apple still repair it and I was wondering how much it would cost, thank you.
-
Back ground colour of applets?
Can i change the colour of the background of my Applets, right now there r a really boaring gray colour, any info would be great thanxs Anthony
-
Hi, Iam new to A.L.V and have few queries.please tell me the coding for the below. At selection screen: Process the following validations for selection screen fields and display the appropriate error messages. 1. Validate the Date From (SAP Tran
-
I'm creating a vector from a recordset, which i will use for paging purposes. I searched the posts for this but didn't find any good answers. Anyway, here's what I have. It's all in the JSP page (at least for now): Vector dataVector = new Vector