Cannot export (greyed out), cannot select clips in project editor

So I just worked on a new project for a couple hours, and just when I'm ready to export, I can't!! ALL of the selections on the Share menu are greyed out. Also, for some reason I suddenly can't select ANY clips in the project!! When I click on a selection, nothing happens (just the cursor follows the mouse, as it should). When I double-click a selection, the inspector window appears and tells me there's no clip selected. When I click on the gear wheel of a selection, it tells me the same thing.
When I exit this particular project and open another one I've worked on, everything is fine. What gives???? I am getting SUPER agitated.

Oh, also I'm finding that when I click the Play Project Full Screen button, it just goes to a blank full screen and nothing plays. And ESC doesn't bring me back to the project...I'm eternally stuck unless I hold down Command + Tab/Q to quite the application. Nice!!

Similar Messages

  • InDesign CS3, Cannot Export (greyed out) or Print

    HELP!! I am having trouble Printing and Exporting in InDesign CS3 only(mac osx), I can Export and Print on all other Adobe programs that are installed on my computer.
    I can also still create a PDF through the Adobe PDF presets, but cannot EXPORT or PRINT!!! Under the File Settings, Export is Greyed out, while Print is Black, but nothing happens when clicked.
    Any ideas???... My printer driver is working good as I print to 3 printers at the moment and make pdfs of a regular basis and this has never happened before. It just seemed to happen out of the blue when I turned my computer on one morning. I've been working the long way around for now, but now need it fixed desperately!!!

    keezie6 wrote:
     ... It just seemed to happen out of the blue when I turned my computer on one morning. I've been working the long way around for now, but now need it fixed desperately!!!
    The classic question is what were you doing just before this? Programs usually don't stop working for no reason "out of the blue," so most likley something else has changed on your system.

  • Cannot delete greyed out podcasts on Ipod Touch

    I cannot delete greyed out podcasts on my ipod Touch since uprading to iOS 5.1. They don't appear when connected to itunes. Scarcely the end of the world but a little annoying! I'd be grateful for any suggestions.

    This appears to be a bug. The only way I have been able to resolve this myself is to unsync and resync all of my podcasts via iTunes.
    B-rock

  • Stamp tool Paste clipboard image as stamp is greyed out & not selectable -

    Stamp tool Paste clipboard image as stamp - This command is greyed out & not selectable - I have copied an image to the clipboard Acrobat X v10.1.4 o OS X 10.7.4 Lion does not find it.  Under OS X 10.6.8 Snow Leopard it worked
    Has anyone else got this working with OSX 10.7.4 Lion with Acrobat X ?- Its a consistent problem for me on both my MacBookPro & IMac computers

    Exactly, that feature was so valuable for me in previous versions.  I am not sure why someone who sells something would eliminate a feature that customers use. What person made that call?  They are probably working at Microsoft now making those "great products" (though I do like Excel, but only because they haven't changed it, esentially, for years...of course, how much can you really change a calculator?). 
    Please fix this Adobe...I would be your biggest fan

  • Conform greyed out in the Clip Window?

    It used to be easy . . .
    I want to conform a 720p 50fps QT clip to 25fps.
    As per the Manual, I opened the clip in CT but "Conform" is greyed out in the Clip Window.
    I attempted a Batch Conform but it showed the process at 50% then CT quit.
    +Where did I go wrong!+ ??

    is fcp showing your original clip as 720p50 or 720p25 ?
    If it shows as 720p25 with 50fps (lets say you used 720pN mode on hvx200) then CT should conform ok. if it shows 720p50 at 50fps then it wont (i dont know why though sorry..)

  • .indd files all greyed out, cannot open from within Indesign CS5

    Dear all,
    On a iMac g5 i7 with Indesign CS5 (7.0.4).
    Since yesterday all .indd files are greyed out when trying to open them from Indesign (command-o).
    From Finder they open fine still...
    Can't find anything on the web.
    Clues?
    Thanks,
    Dirkjan

    Indeed, you clearly need to find the source of the problem.
    In my limited experience, this kind of thing happens when some program misbehaves and causes the LS Database to get corrupt. This usually happens as a one-time event, so rebuilding is an easy solution.
    In your case, obviously the problem is chronic, so you will need to get to the bottom of it.
    There is no reason to assume that InDesign is at fault. I'm afraid I don't have any tips for you. Contact an Apple support path, I guess.

  • Automatic Login 'greyed out', cannot defeat...?

    Hi
    every time I boot up since upgrading to OS10.10.1 I have to manually crank the thing to start up, in other words the automatic boot option does not happen. In System Preferences / User Groups / Login Options .. the Automatic Login is 'greyed out'... as if I have suddenly lost administrative control over the thing. Can anyone help here?
    thanks and regards

    Are you using iCloud password as login password?
    Changing it may help.
    System Preferences > Security and Privacy > General > Change Password

  • Cannot export video: AME cannot read from source, Installation Error

    Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked.
    I cannot export anything from Premier Pro using Media Encoder.  When I try, I get an yellow warning sign saying that it cannot read from the source, and when I close out of it I get a message saying that there is an installation error and that I need to make sure it is installed correctly.  I have uninstalled and re-installed ALL of my Adobe products about three times this past weekend trying to fix it and nothing has worked.  I have tried making sure that there are no blank spaces in my project, I have named it several different things, I have moved it from my external drive to my main drive, to a different external drive, etc.
    I am using a Macbook Pro with Snow Leopard, all of my software has been updated, and I am very frustrated. 
    Help?

    Bummer!
    Well, it was worth a shot, as externals/network drives have been known to cause similar.
    Now, there were issues with Encore and Snow Leopard, but I do not recall all of the details, as I am a PC-guy, and have to admit that first I do not know squat about Macs, and probably do not read Mac threads as closely, as I should. Seems that Apple was working on an update to Snow Leopard, and again from recollection, it seems that that update helped several on the Encore forum. Have you updated Snow Leopard?
    Sorry to just sit here guessing, and probably wasting valuable time for you, but until a Mac-user with the "fix" comes along, the PC-community will try to help. Be patient with us though. Our intentions are good ones, but our expertise is lacking - at least in MY case.
    Good luck,
    Hunt

  • Workflow for marking clips and then exporting them out as individual clips with audio?

    Hello,
    I'm just starting to use Prelude.  I recorded an interview for my daughter for a school project last week.  The interview went well, but I want to mark as "sub-clips" all of the video interview's question/answer combos (e.g. "What is your name?  My name is John Doe.") and then save them out to individual clips rather than have to manage the full size files (about 40GB in all from my Panasonic GH3, 50mbps, IPB MOV) with clip markers.  I'll keep the originals as backups, but would really rather work with the individual clip files.
    Any help with this would be greatly appreciated!  I would think this would be a very simple and common function.  Basically, just dividing up the original video into multiple, standalone video clips with the same bit-rate, encoding, etc., but with new headers/EOF markers.  Just chopping the original files up into chunks with no changes or reencoding necessary.  If I can do it the way I imagine it, it should be a very quick process, at least compared to transcoding the files.
    Best regards,
    Scott

    Hi -
    Meg The Dog's suggestion will work if you don't intend to bring in all of your media off the card.  The Partial Ingest method will allow you to selectively create subclips during ingest and not transfer the full original clips.
    However, you do state you plan to keep all your media - not just the parts you want to subclip. So here's my suggestion for the workflow:
    1. Ingest all your media from your cameras (the entire clips - not the partial clip method)
    2. Open each clip from the Prelude Project Panel and create your Subclip Markers using Prelude logging tools.
    3. In the Project Panel you will find new entries will appear for each SUBCLIP Marker you add to your master clips.
    4. You can organize you subclips into BINS as needed to keep track of the segments of your video
    5. When you're ready to create your timeline of subclips you can either
       5a. EXPORT all the SUBCLIPS into their own files (select all subclips you want to export and use the FILE->EXPORT->MEDIA menu command)
       or
       5b. Drag-Drop your subclips into a ROUGHCUT in Prelude to order your story. Then use the SEND TO PREMIERE PRO feature to send the Rough Cut into Premiere pro where you can finish your edit. All the media will come along for the ride into Premiere Pro (including your Subclips). You can then add titles and any effects easily enough in Premiere Pro).
    There are some other options here you can also try out which might be interesting. For example, you can add transitions and any additional audio tracks to your ROUGH CUT directly in Prelude and then EXPORT the Rough Cut as a final movie - and not need to move to Premiere Pro unless you have wider editing needs.
    Hope this helps!
    Regards,
    Michael

  • Greying out some selection options on a selection screen

    Hi,
    selection-screen: begin of block b0 with frame title text-000.
    select-options so_vnum for lfa1-lifnr.
    parameters: r1 radiobutton group rad1 default 'X',
                r2 radiobutton group rad1,
                r3 radiobutton group rad1.
    parameters: p_numdys type piqnumb.
    selection-screen end of block b0.
    In the above code, I want that if the p_numdys is entered then the radiobuttons r1, r2, n r3 to be greyed out how can I achieve that?
    Regards
    B

    Hi,
    if you want to gray out radio buttons after interactiing with selection screen then use following logic.
    selection-screen: begin of block b0 with frame title text-000.
    select-options so_vnum for lfa1-lifnr.
    parameters: r1 radiobutton group rad1 modif id ABC default 'X',
                r2 radiobutton group rad1  modif id ABC,
                r3 radiobutton group rad1  modif id ABC.
    parameters: p_numdys type char4.
    selection-screen end of block b0.
    AT SELECTION-SCREEN.
    AT SELECTION-SCREEN OUTPUT.
    IF P_NUMDYS IS NOT INITIAL.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'ABC'.
    SCREEN-INPUT = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    Regards,
    Peranandam

  • PS CS6 Filters greyed out for Timeline clips - what's wrong?

    Hi
    I've just watched an Adobe TV video by Julianne Kost about video features in PS CS6.
    At one point she converts a video clip into a Smart Object in order to apply a PS filter, but when I do this, the entire Filters menu is greyed out.
    The mp4 clip plays normally in the Timeline otherwise.
    Is there something I have to do to make this work?
    Cheers
    Richard

    I tried the same procedure again, but this time the filters were available. Not sure what was different - will repost if I can reproduce original issue.
    Thanks
    Richard

  • Grey out previously selected!

    Hi all,
    I have five images on a slide, each one linked to another slide that the user has to carryout intercations; then when they are done they click and go back to the main slide with the five images, this time I want them to see the previously selected image greyed out. Can any one help or provide a work around.

    Hi Lilybri,
    I really could do with having a play with your template to see how I can apply some of it to my project. Would you be able to send it to me? if so how?
    Do I provide you with my email here or any other means?
    Your help will be appreciated as I have one more week to turn the rest of the project around.
    Kind regards.

  • My wife's email settings are greyed out, not selectable?

    I'm not sure what's going on but she has a iPhone 4S along with a 2009 27" iMac that is fully updated.
    However her email accounts ALL have the password missing and when I put in the correct passwords it says it wrong and it won't stay in there.
    And the incoming mail server for her iCloud account is greyed out and will not allow me to put in anything. Now this one won't even let me input anything.
    So no matter what I put in there for a password even though it's correct it stays empty and then the iCloud won't let me put in the incoming mail server.
    Ideas?

    Anyone?

  • Why is Import Video greyed out for a new Flash project?

    I have been trying unsuccessfully to load any MP4 (H.264 encoding), FLV, or F4V files into a brand new project. I've tried importing FLV and F4V files via the Import to Library and Import to Stage menu choices but all result in "One or more files were not imported because there were problems reading them" error message. I just downloaded Flash CC today (Feb 23, 2014) and cannot even get started on my project since I cannot seem to load a video into the library or stage. I've looked at the tutorials, but they assume that I can choose the greyed out Import Video... menu choice. Searching the discussion didn't help me as most of the discussions are off-topic or from 2 or more years back.
    Thanks,
    Xtraspatial

    Thank you sinious. I had QT 7.5.5 installed. The problem was unrelated. Like a bufoon, I created a new HTML5 canvas, which is unable to import videos. When I switched to a AS3 canvas all was as it should be. And there was rejoicing throughout the land! Case closed.

  • Can't select clips in project

    Several times now, I've run in to a problem where I can't select clips in the project.  I can click everyewhere else, I can chnage and use other tools, but I can't select a clip!  I've tried dragging a box and clicking directly on the clip, but no luck.  A restart fixes the issue, but it's happened many times.
    Any suggestions?

    I forgot about the C key... I'll try that next time.  I had the select tool (A) selected, so it should have worked.  With a restart everything is fine now, but it's odd that it's happened several times.  I also try things like switching apps, resize the window, change tools, switch projects, but nothing seems to bring it back (except a re-start.)

Maybe you are looking for