Cannot Export Keynote to Quicktime

When i try and export a the keynote into quicktime, the result is not as intended. i have recored a video inside of keynote, with animations and different timings. the video is around 8 mins long. when i export it to quicktime, i get a video of 4 seconds in lenght. this is the screen shot of the options i get when i click "File", "Export to", "Quicktime".
any help would be much appreciated

The export options show that the QuickTime export will take the timings of the transitions from the "recording"; every time you press the enter, spacebar or right arrow key, Keynote will advance to the next event.
The recorded timings are wrong, you therefor need to clear the timings and record them again:
1 - Inspector > Document > Audio > click the clear button
2 - click record
3 - click the red start record button at the bottom left, wait for the countdown to finish then press the enter key every time you want to advance to the next event.
4 - when your reach the last slide, click the record button again, then click the X button top right
test the timings are correct by playing the presentation from slide 1

Similar Messages

When exporting keynote to quicktime it is crap. why?

when exporting keynote to quicktime, it is really jumpy/jittery WHY!?!?!?
need help

Same thing happening to me.
Seems like it's a quicktime bug.
I see some discussion at http://www.jem-thematic.net/en/node/871
It seems to indicate the only way is to downgrade from QT from 7.5 to 7.4.5... and, if you use iMovie, this will also break iMovie, you'd need to reinstall... UGH.
Sean

Exporting Keynote to Quicktime - complete loss of sound

Hey,
I’m facing problems when it comes to exporting Keynote to Quicktime.
For a tutorial, I recorded a Quicktime movie of my screen (including my voice as audio). This Quicktime movie is placed on a slide and runs during the whole presentation. I use animations for showing text blocks that give additional info while the movie is running.
In Keynote everything works just fine. But when I export it to Quicktime, *the sound stops as soon as the first animation is started with a click*. From then on I can see both the embedded Quicktime movie and the animations but without audio.
Sometimes it even happened that after doing the first click I could see the animations only, but no Quicktime video / sound.
I’ve spent the last nights with trying changing export settings and so on, searched this forum up and down, but couldn’t find a solution…
Any suggestions?
Thanks, Mike

I just posted this on another similar inquiry. THis may help. I posed a similar question so check the thread "Bottom line...etc." If you follow the guidelines below it should work. The final result is one QT movie with all slides and music. The product was so much nicer than the iPhoto slide shows (although they are OK too. (I don't know about the video in the Keynote might work as described in the initial post here.)
Here is what the final answer was, at least for my situation:
"YESSSS!!! Even after meeting with 4 Geniuses and 1 Creative the answer was still a definite bottom line, "Maybe." Until, I finally realized that the one setting that I was not using correctly was in the Export> QT> Playback. I had been using "Manual" and not using the "Fixed Timing" out of fear that it would change the custom settings that I had on each slide. However, that is not the case. The settings on each slide remain the same even though in this option there are settings for slide duration and build duration. I do not know what those options do but the bottom line is I now can Export to QT and then import to iDVD with both sound and video as one file and they work fine both as an isolated QT file as well as a QT/Slideshow in iDVD. Thanks for the help from all the contributors both recently and quite awhile ago when I first faced this challenge.
Peace,
Jim

Exporting Keynotes into Quicktime

I teach K-6 graders and I like to begin each lesson with a recorded lesson they watch on the computer in front of them and then we practice what I taught them in the presentation. I was using Keynote, but it had problems with embedded videos at times. I like to add embedded videos while I explain and show them what they are expected to do. The audio would play but often the video would not.
So I began recording the presentations and exporting them to Quicktime. I didn't have a problem until this week. Most worked fine, but two do not have the controls in the video. By that I mean, when you mouse over the presentation, I would like students to be able to pause, rewind, rewatch, etc. as they need to but the controls are not showing up on the mouse over.
This is only happening on these two videos. The rest work perfectly and I have tried multiple times. I cannot find anything that is set differently. The only difference is that these are made for 5th and 6th graders and are slightly longer than the other videos.
Has anyone experience with this? Older discussions point to using paths that my version of Quicktime simply doesn't have and I am at a loss.
Thanks

Hi Patrick,
Thanks for the info. But I can not get any setting to come out looking widescreen. All settings come out square looking. I have tried every setting I can think of but all the QuickTime exported movies come looking like (i.e.: 800X854) more box than widescreen. I think it must be some setting I do not know about or some combination or possibly the capture setting (easy setup).
Thanks for your help.

Audio not working properly on exporting keynote to Quicktime

Hello everybody,
I've created a Keynote presentation, with voiceover. It runs perfectly when launched in keynote, standalone, but as I try to export it to quicktime, the audio from an embedded video clip (just one out of 3 clips embedded in the whole presentation) stops after a few words (while the other work perfectly).
I'm going nuts! I tried saving the file afresh under different name, redoing the voiceover, tossing and reinserting that clip that stops, and save again, no luck!
Anyone experiencing the same issue?
thanks,

Hello, I have the same problem, my Quicktime movie has some of the audio files but not others. This is for a professional job so the delay while I try various settings is not helping my cause. I thought Quicktime was a well-proven solution!

Exporting keynote to quicktime

Hi,
I have only 5 pages of keynote presentation which I exported to Quicktime. When I launched the slide in Quicktime, I only see two of the five. And I dont see any control (play, pause, forward etc) even if I move my cursor over the slide page..please help. I have Quicktime Player X and Keynote '09 version 5.0.3 (791) with Snow Leopard OS 10.6.1.
I checked mac support download and I dont see any update for the quicktime player 10. any suggestions? thanks.
lustre

solved

Exporting Keynote to quicktime only 1 song on my playlist plays

When I tried exporting into quicktime only the first song on my playlist played with my presentation. Any ideas?

I just posted this on another similar inquiry. THis may help. I posed a similar question so check the thread "Bottom line...etc." If you follow the guidelines below it should work. The final result is one QT movie with all slides and music. The product was so much nicer than the iPhoto slide shows (although they are OK too. (I don't know about the video in the Keynote might work as described in the initial post here.)
Here is what the final answer was, at least for my situation:
"YESSSS!!! Even after meeting with 4 Geniuses and 1 Creative the answer was still a definite bottom line, "Maybe." Until, I finally realized that the one setting that I was not using correctly was in the Export> QT> Playback. I had been using "Manual" and not using the "Fixed Timing" out of fear that it would change the custom settings that I had on each slide. However, that is not the case. The settings on each slide remain the same even though in this option there are settings for slide duration and build duration. I do not know what those options do but the bottom line is I now can Export to QT and then import to iDVD with both sound and video as one file and they work fine both as an isolated QT file as well as a QT/Slideshow in iDVD. Thanks for the help from all the contributors both recently and quite awhile ago when I first faced this challenge.
Peace,
Jim

Skipping Chapters/Slides in exported keynote to QuickTime

Hopefully someone may have the answer.
I was wondering if anyone had an Idea on how I could skip slides or chapters on the fly (or before a presentation) in a Quicktime movie that was exported to Keynote.
For my Windows users I give them a QuickTime file of the keynote presentation to play back. Now, if they wanted to skip some of the slides/chapters is there a way to do that?
Any help would be appreciated.

If you exported to QuickTime as an interactive slideshow, every slide is a charpter. So, they can easil click on the next button even in full-screen mode...
Hope that was helpufull
Regardzzz
CV

Exporting Keynote to Quicktime movie with audio

I am struggling to get this to work although I have done so previously. I have a fully functioning keynote with an embedded quicktime movie and an audio file. The Keynote works fine.
When I try to export it I just get the audio file!! I am opting for 'manual' even thought the Keynote is a looped production without the need for any manual input.
Any ideas? thanks

Exporting to Quicktime with sound seems to have been restored ok in Keynote 09 as I have just tested it on the trial download copy. Up until then I have been importing into Garage Band without sound and adding it there which is successful but I think the quality of picture is better with only one step i.e within Keynote itself.

Exported keynote to quicktime -- how to advance?

Hi,
I have a keynote file that is to be played on a windows platform.
So it has been successfully exported as mov and got a nice advance forwarding slide control..
I would like to know what if I need to jump back to the previous slide in the mov file?
I could do it with my 3-finger-swipe on my macbook in the mac version of QT..
but is there a shortcut for this to be done on a windows QT?
Many thanks!
Message was edited by: SamboLover

I would like to know what if I need to jump back to the previous slide in the mov file?
Press the left arrow key on the keyboard.

ERROR MESSAGE: Your slideshow cannot be exported as a quicktime movie

I keep getting this message every 2 or 3 files that I try to export a keynote presentation with audio as a movie file.
I'm trying to export movies from presentations that are around 1 hour to 1 hour and 30 min long with audio.
Sometimes Keynote '09 exports the files and sometimes it doesn't.
No idea why.
The exact message says:
Your slideshow cannot be exported as a quicktime movie
There is not enough disk space or there was a problem with the file. Error -1
I have 28 GB of disk available.
Any suggestions?

Thanks, Kyn. I checked for missing audio icons, but they are all visible. Besides, I exported different batches of slides, such as 11-20 and 21 - 30 and 11-12, all with the same result. So, it is not just one slide causing the problem.
I was able to save the entire presentation as an iWork 05 document, then export it as QuickTime from Keynote 2 with success. I'd like to get it working in Keynote 3 as well.
David Kater

Your slideshow cannot be exported as a QuickTime movie.

Hi,
I have created an Keynote presentation and had exported it many times, over and over, since I need it to be exported. Today, I did it three times, and when I went to change the preference for exporting...
I was using Custom > H.264 @ 60frames @ Key all frames @ Multipass.
I wanted to change to > DV-PAL > @ 30frames @ Quality Best @ Scan progressive @ 4:3.
When I tried to export, 1/3 down the export I got the Error -50.
Quote:
Your slideshow cannot be exported as a QuickTime movie.
There’s not enough disk space, or there was a problem with the file. Error -50.
I have enough disk space but what can be wrong with the file?
I have unchecked exit after last slide.
I need answer fast. I cant rebuild the whole presentation.

Hi Gary,
Thanks for the reply.
I used the default "Full Quality, Large" settings, and the Keynote I'm working on is based on Keynotopia's iPhone-mockup/wireframe slides, so they are 640x960 in size. Here is the export screen:
This is on Mac OS X Mountain Lion with the latest version of Keynote from the App Store.

Issue : How to get better definition of fonts/typography in Keynote when exporting to HD Quicktime ?

Hello,
I understand there are no possibilities to "add" a vector button to future keynote allowing crisper and smoother fonts. However, when writing texts with effects in a Keynote presentation, and exporting it to Quicktime , whatever the resolutions chosen and clors and settings, still,effects are smooths, but fonts/typography/texts are not clean, crisp and when using a big display in full screen , the .mov or .mpeg4 outcome still always displays poor resolution for text.
Anyone could suggest something ? I want to be able to choose my texts effects on Keynote, while securing an outstanding fonts/texts resolution and apperance when in HD movie, quicktime or else.
Thanks a million for any suggestions guys !
Isa

I have several video clips from iStockPhoto. I don't know what camera's/settings were used, but know that they are all 640x360 px and vary between 25 fps and 30 fps. I also have 3 still images that I have insterted that I formatted to be 640x360 to keep everything the same size. Everything appears correct when viewing the project as I've built it. I'm attaching a few screen shots of the most recent settings for export, though these are not the only that I have tried. Everything comes out with the same result.
I can't insert screen shots of my settings for some reason (?) but here is some info on my most recent try. I chose to export as a Microsoft DV AVI. Then in the Video options I'm using the DV NTSC codec. For size, I chose the D1/NTSC Widescreen 16:9 (1.2) option.
As for other times I've tried this, there are only 2 other codecs to choose from when saving as a DV AVI. I've tried both of them too. Everything has had the same result. I've tried a Quicktime file as well.
Does anyone have a suggestion as to the best file/codec/setting combination?
Thanks,
Holli

Movie in Keynote doesn't export properly for QuickTime

Hello all. I really hope someone can help with this. I've used the discussions before with great success so THANK YOU all for sharing your expertise.
I've got a keynote presentation that for the most part exports perfectly on QuickTime. The only part that doesn't export right are the 2 videos I've got on the presentation. I set the timing with the inspectors for it to start automatically and even added a song to play along with the presentation. But when I export it, there is about an extra minute and 15 seconds added to the whole video and I've got the presentation timed perfectly with keynote and the song. I've got iWork '09 and QT 10.0. Not pro just player.
I've played with the custom settings to no avail. Any way to get the videos to export exactly to their lengths?
Cheers

I don't know if this is the answer you're looking for but I'll share my experience. Like you, I have three videos in my presentation. Once I exported it as a QT movie, the delays that I built in with the Inspector to allow the movie to play before the next slide transition, played AFTER the video ran. I went back and just put in a 1.5 second delay in and the videos run fine. I'm guessing that QT sees the video and allows it to play and THEN looks at the Delay setting.
Now if someone can just tell me how to get the audio soundtrack to shut down during my three videos but play during the rest of the presentation...

Exporting from Keynote to quicktime messing with timing

Hello, I have been searching the discussion board, but I have not found anything that answers my question.
I have created a slide show in Keynote where each slide is on screen for 2 seconds, then transition for 2 seconds. I exported it to Quicktime, where, when I play it as just a Quicktime movie it looks right.
However, when I drag the Quicktime movie into iDVD, the slides are only on screen for 1 second with a 1 second transition. I am only draging and dropping the Quicktime, so why is it changing, and how could it possible change from a saved file?

Yeah, me too. Bump. Can anybody explain this behavior?!?

Cannot Export Keynote to Quicktime

Similar Messages

Maybe you are looking for