Cannot Export MPEG2 with Audio

Hi Guys
I have a bizare problem. I've been trying to export a short 2 min movie to MPEG 2 for YouTube but it won't export the audio with video and exports the audio as a separate file (yes, the export audio box is checked)! Yet it will export with audio to AVI. What could I have switched off or need to switch on?
Can anyone advise please? The movie was captured using the DV PAL Codec (720x576). The export settings are:
Audio Format MPEG
Basic Audio
Codec: mainConcept MPEG Audio
Audio layer: Mpeg1 Layer II Audio
Audio mode :Stereo
Sample size: 16bit
Frequency: 48Khz
Bit rate: 224
Psyc mode: Model 2
Demphasis: No emphasis
Enable CRC - Set Original bit: all off
Video Format MPEG2
Pre-set PAL DV High Quality
Basic Video Settings
Codec: MainConcept MPEG Vide
TV Standard: PAL (I'm in Europe)
Frame: 720x576
Frame rate: 25
Field order: Lower
Pixel Aspect: Standard
Profile: Main
Level: Main
Render at max: off
Bit rate: VBR 2 pass
min bit rate: 2.4
Target bit rate 4.2
max bit rate: 6
GOP Settings
M & N frames: 3
Closed GOP: 0
Macroblock: 10
VBV buffer: 112
Noise: sensitivity
Write SDE: No
Force VBV oxfff
Intra DC 9bits
Write sequence end code: Yes
Embed SVCD: No
Ignore frame interval: 0

Turn on the Multiplexer. You have been exporting el;ementary streams resulting in two files, one for video and one for audio. You have to make the export a transport stream to get a single file with both video and audio.

Similar Messages

Exporting to mpeg2 with audio

Trying to export to MPEG2 with audio from fcp studio to broadcast over cable, anyone know how to do this.

So, you need a muxed file? You may need to buy Sorenson Squeeze and check the station for the exact settings or the web for settings files. (i.e. I found a Fast Channel setting online somewhere)
Message was edited by: Tom IV

Export mpeg2 with subtitles

I have a dvd-project with one film-track, one audio-track and one subtitle-track.
I want to export this (video, audio & subtitle) into a mpeg2-file. How to do this?
I have tried to export as a dvd (build) and then tried to convert and mux the files in both Cinematize and Mpegstream clip. Nothing works.
Can I export from dvdsp the subtitles into final cut? Or can I import a .stl-file into fcp? Is it possible to import in any way created subtitles in dvdsp into fcp?
Is it possible to export anything else then DVD (vob) from dvdsp?

I found a solution...
I made a DVD in dvdsp. Open the DVD in Cinematize. Exported a subtitle movie, without picture and audio. I imported the subtitle-quicktime into after effects and made a sequens suitable my projects settings and exportewd an quicktime with alpa-channel. Imported the new quicktime in fcp and sync together with my movie then exported a muxed mpeg 2 thru compressor. This REALLY *****!
Wonder why you cant export subtitles-tracks from dvdsp to fcp? It would be great if you were able to work between dvdsp and fcp like you do with fcp and motion.

Export PDF with Audio

Maybe I'm not able to do it, but I have a feeling it's just because I have NO clue as to how to go about it.
I've mae a pdf file using Acrobat XI . I've embedded an audio file. The pdf file works just fine on my PC but when I want to export it the audio doesn't show up. Is this function possible ? If so , how do I go about it ? I'm a NEWB !!
I thank you in advance for any help !
Cheers!

I want to place PDF file or link to it on my FB page, when I do, the embedded audio file doesn't go with it. So I guess I'm not saving it in the right format ? I guess this would be the same if I embedded a video file as well?
If this can be done , what is the step by step instruction ? I can't see where I can save it in a different format ?
Thanks again

Export Quicktime with Audio - timings to advance slides -does not work

Mac OS 10.6.1
iMac 27" 4 GB 1067 MHZ
Keynote 09 - 5.03
I opened a .ppt
I added an windows media file after getting it into GarageBand - so a GarageBand file actually
I timed the slides - this does not work either as a side remark - you can not just enter seconds there - they disappear - you need to use the arrows
If I test the slideshow, it runs nice in Keynote.
If I export it to Quicktime, the sound works, the slides do not advance.
(I think I had it once working before I moved my files to my new Mac)
Help please
nico

I'm just posting this as a general discovery....
I too have had many many frustrations with creating a slide show with audio clips linked to individual slides and a soundtrack music background. Of course this records fine and plays back fine in KN. The problem lies in any form of sharing/exporting. The audio either disappears or the timing goes nutty.
What I discovered was....During a manual recording in which I advance the slides and the builds within the slides, the tap of the space bar directly correlates to when the audio would stop in the exported version. ie. Slide one, audio set to start automatically after transistion, text has no builds, Slide 2, audio set to start automatically, text builds with each bullet. In the exported version the second I hit the space bar to create the first build during the recording, is where the audio is cut off in the exported version.
Therefore, if I go through each and every slide and set the timing for each and every build, transition, etc. , then record the slideshow so that I never have to hit the space bar to create builds (transitions to next slide seems to be fine) my exported recording seems to play back without problems. This is very tedious but seems to work (so far).
I hope I have explained my findings clearly. I also hope that this is somewhat helpful to the rest of the world

Cannot Export PDF with Hyperlinks and Bookmarks

August 1, 2008
Hi Everyone,
I've recently upgraded to InDesign CS3. I opened a 40 page document that was completed in InDesign CS2. When I try to export to a PDF (with include hyperlinks and bookmarks) the program quits once it reaches the 5th page.
I've tried exporting without hyperlinkes and bookmarks checked and PDFing works fine. I had no previous PDFing issues when working in CS2.
Any suggestions/tips/guesses would be appreciated.
Thank you,
NB
Windows XP
InDesign CS V.5.0.3

Hi! I need help w indesigns hyperlink...
I am working on a long document and have 5 files, I was able to use hyperlink on each one that way the reader could jump fr one file (or page) to another. The hyperlink worked perfectly on PDF. Now I need to merge these five PDF's into 1 PDF file but the hyperlink that I have created on individual files doesnt work in a combined PDF. Is there a run-around on this? Any suggestions? I'm just new in indesign and need inputs. Thanks!
Im using Windows XP and CS3.
Nelle :)

Mpeg2 with audio

Hi,
I am compressing some video for a DV66 Mpeg player, it uses a compact flash card to display looping video, I was wondering if compressor could make an mpeg 2 file with the audio imbedded in it.
On the pc you can do that with pinnacle but I am using a mac. I was able to do it with mpeg 1 but that is less quality.
thank you.

hey,
sorry I was impatient and didn;t read the thread directly below mine. Thanks for answering in the other thread already.
I'll be more patient next time
thanks

Cannot Export Versions with Aperture 3.3

After upgrading to Aperture 3.3, I lost the ability to Export Versions of my files. Exporting Originals works just fine, but I need to I export jpegs for my work. What I end up getting now is a jpg with a totally black image. The metadata is intact and the size and jpeg format are correct, but the image is just black. I have already tried Repairing Permissions and Repairing the Database in Aperture with no change. I have not yet tried "Rebuild Database" but I do not think that is the problem because I am able to Export images from my Aperture Library files using iPhoto without a problem. Please help.

I am exporting with a preset that I have set up. Here are the settings:
Image Format: JPEG
Image Quality: 10
Size To: Fit Within (Pixels) Width 1024 Height 683
DPI: 132
(No Gamma Adjust)
Color Profile: Use Source Profile
(Black Pint Compensation NOT CHECKED)
(Show Watermark NOT CHECKED)
Okay, the good news is that I tried other settings and it worked. Tiff works just fine and exporting the preset jpeg setting (full size, half size) works just fine. I then deleted the export setting mentioned above and created a new one, but it does not work.
So, I am almost there. I appreciate your suggestions so far as some of them worked. Any more ideas?

Exporting video with audio from composition....

I'm working on commercials, and I ran into an issue when I tried to Export Audio to Movie.
I'll select a format, save to a folder, Logic will say "bouncing..." and act like it's attaching the audio from my track to the original video. But when I watch the video that is produced, only the audio from the movie is there (or it is completely silent, depending on if I chose to include original track audio).
What is going on? It seems nobody else has this issue...

look here :
FILE / Export Audio to movie
then, unselect the original 2 stereo track if it imported on the arrange window ( unselect the 2 track of the Qt movie by clicking outside the selection )

Cannot export reports with CR8.5 RDC under Windows 2003

<%@ LANGUAGE="VBSCRIPT" %>
<%
Response.Buffer = True
%>
<% SERVER.SCRIPTTIMEOUT=50000%>


<%
Dim objConnection
Dim objRS
Set objConnection = Server.CreateObject("ADODB.Connection")
objConnection.Open "FAMS_DSN_SIT", cstr(userid), cstr(password)
'response.write GetNActive
If GetNActive > 5 THEN
 Response.write " Server is too busy. Please try again later."
 Response.end
End if
IF GetNActive<=5 THEN
'Nagesh added
Dt_Frm="20020101"
Dt_To="20020102"
Dt_Frm1="20020101"
Dt_To1="20020102"
reportname="B087.RPT"
' CREATE THE APPLICATION OBJECT
If Not IsObject (session("oApp")) Then
Set session("oApp") = Server.CreateObject("CrystalRuntime.Application")
End If
' CREATE THE REPORT OBJECT
'The Report object is created by calling the Application object's OpenReport method.
Path = Request.ServerVariables("PATH_TRANSLATED")
While (Right(Path, 1) <> "\" And Len(Path) <> 0)
iLen = Len(Path) - 1
Path = Left(Path, iLen)
Wend
'OPEN THE REPORT (but destroy any previous one first)
If IsObject(session("oRpt")) then
 'Set session("oRpt") = nothing
End if
'RESPONSE.WRITE PATH & REPORTNAME
Set session("oRpt") = session("oApp").OpenReport(path & reportname, 1)
Set DatabaseTablesCollection = Session("oRpt").Database.Tables
For Each Table in DatabaseTablesCollection
' ' Table.SetLogonInfo "FAMS_DSN", "", cstr(userid), cstr(password)
 Table.SetLogonInfo "FAMS_DSN_SIT", "", cstr(userid), cstr(password)
Next
'session("oRpt1").MorePrintEngineErrorMessages = False
'session("oRpt1").EnableParameterPrompting = False
'session("oRpt1").DiscardSavedData
set session("ParamCollection") = Session("oRpt").Parameterfields
'This line creates an object to represent the collection of parameter
'fields that are contained in the report.
reportname = UCASE(TRIM(reportname))
strSQL = "SELECT FAMS_VW_MEN_RPT_B87.CASE_NO, FAMS_VW_MEN_RPT_B87.COMP_NAM, FAMS_VW_MEN_RPT_B87.COMP_ID, "
 strSQL = strSQL & "FAMS_VW_MEN_RPT_B87.RESP_NAM, FAMS_VW_MEN_RPT_B87.RESP_ID, FAMS_VW_MEN_RPT_B87.JUDGE_NAME, FAMS_VW_MEN_RPT_B87.NATURE_OF_COMP, "
 strSQL = strSQL & "FAMS_VW_MEN_RPT_B87.COURT_NO, FAMS_VW_MEN_RPT_B87.JDG_ID, "
 strSQL = strSQL & "FAMS_MASTER_DETAIL.ITEM_DESC1, to_char(FAMS_VW_MEN_RPT_B87.MENTION_DATE,'yyyymmdd') "
 strSQL = strSQL & "FROM FAMS_VW_MEN_RPT_B87 FAMS_VW_MEN_RPT_B87, FAMS_MASTER_DETAIL FAMS_MASTER_DETAIL "
 strSQL = strSQL & "WHERE FAMS_VW_MEN_RPT_B87.COURT_NO = FAMS_MASTER_DETAIL.ITEM_CODE() AND FAMS_MASTER_DETAIL.MSTR_TYPE() = 'CRT' AND "
 strSQL = strSQL & "(to_char(FAMS_VW_MEN_RPT_B87.MENTION_DATE,'yyyymmdd')) >= '" &Dt_Frm & "' AND "
 strSQL = strSQL & "(to_char(FAMS_VW_MEN_RPT_B87.MENTION_DATE,'yyyymmdd')) <= '" &Dt_To & "' "
 strSQL = strSQL & "ORDER BY FAMS_VW_MEN_RPT_B87.COURT_NO ASC "
 set objRS = objConnection.Execute(strSQL)
 If not objRS.EOF then
 set Param1 = session("ParamCollection").Item(1)
 'ParamValue1=Request.QueryString("COURT_NO")
 ParamValue1="1"
 if ParamValue1 = "" then
 ParamValue1 = "-"
 End if
 Call Param1.SetCurrentValue (CStr(ParamValue1),12)
 set Param2 = session("ParamCollection").Item(2)
 'ParamValue2=Request.QueryString("DATE_FROM")
' Call Param2.SetCurrentValue (CStr(ParamValue2),12)
 Call Param2.SetCurrentValue (CStr(Dt_Frm),12)
 set Param3 = session("ParamCollection").Item(3)
 'ParamValue3=Request.QueryString("DATE_TO")
' Call Param3.SetCurrentValue (CStr(ParamValue3),12)
 Call Param3.SetCurrentValue (CStr(Dt_To),12)
 set Param4 = session("ParamCollection").Item(4)
 'ParamValue4=Request.QueryString("JDG_ID")
 ParamValue4=""
 if ParamValue4 = "" then
 ParamValue4 = "-"
 End if
 Call Param4.SetCurrentValue (CStr(ParamValue4),12)
 'Testing -- to get the data from database end
 'Expoert into DOC
Set CrystalExportOptions = Session("oRpt").ExportOptions
ExportFileName = "BO87.doc"
dPath = Request.ServerVariables("PATH_TRANSLATED")
While (Right(dPath, 1) <> "\" And Len(dPath) <> 0)
diLen = Len(dPath) - 1
dPath = Left(dPath, diLen)
Wend
ExportDirectory = dPath
ExportType = "14"
CrystalExportOptions.DiskFileName = ExportDirectory & ExportFileName
CrystalExportOptions.FormatType = CInt(ExportType)
CrystalExportOptions.DestinationType = CInt(1)
Session("oRpt").Export False
Response.Redirect (ExportFileName)
set session("oPageEngine") = nothing
set session("oRpt") = nothing
set session("oApp") = nothing
Session.Contents.Remove("oPageEngine")
Session.Contents.Remove("oRpt")
Session.Contents.Remove("oApp")
objRs.Close
 Else
 objRs.Close
 Response.write "<center>No Record Found </center>"
 Response.end
 End if
end if
%>

Hello,
Here's VB code to export to PDF, convert to ASP and test again. If it works in our viewer then it should work in code:
With rpt.ExportOptions
 .DiskFileName = "c:\report.pdf"
 .PDFExportAllPages = True
 .FormatType = crEFTPortableDocFormat
 .DestinationType = crEDTDiskFile
End With
rpt.Export False
Make sure the export destiantion has permission to be written to by any user.
Thanks again
Don

Export Video with Multiple Audio Tracks

I need to be able to export video with audio on multiple tracks. I have moved to CS6 from FCP 7 where this was rather easy to do. I can make a preset in AME with more than enough mono tracks but after the encode the video is always smashed to one mono track. I am not doing a 5.1 mix, there are different mic's on each track that need to remain independant of one another and mixing them down within Premiere is not feasable. Are there no options to just have the audio 'pass through' like Compressor? Sorry if there are other posts but I have been searching forever and can not find a simple answer on this topic.
Also, is there no way to have the source timecode burn in? Putting a filter on the video in a sequence is unacceptable, I am very displeased to find that this doesn's seem possible in AME or Premiere, it has been part of Apple's suite for years.
Example of my preset from Compressor:
Name: Apple ProRes 422 (Proxy)
Description: QuickTime movie with Apple ProRes 422 (Proxy) and audio pass-through
File Extension: mov
Estimated size: unknown
Audio: multi-track pass-through
Video Encoder
          Width: (100% of source)
          Height: (100% of source)
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: Apple ProRes 422 (Proxy)
          Multi-pass: Off, frame reorder: Off
          Automatic gamma correction
Progressive
          Pixel depth: 24
          Spatial quality: 50
          Min. Spatial quality: 0
          Temporal quality: 0
          Min. temporal quality: 0
Timecode Generator
          Position: Lower Right--Title Safe
          Alpha: 1.000
          Label: Source Timecode
          Start Timecode at 00:00:00:00 false
          Text Color: r:0.0000, g:0.0000, b:0.0000
          Font: Helvetica, 36

Hi James,
For exporting a multitrack .wav file, you have to start a project with a multichannel audiomaster (3-16 tracks).
Copy and paste your complete edit to the new editsetting.
Now in the audiomixer you can route your audiolayers to the multichannel you like.
(CH1+2 pan to left is channel 1, pan to right is channel 2 and for a stereo track pan to center : channel 1 for left and channel 2 for right.)
Then you export your project to a 3-16 tracks multitrack .wav file.
When you need mono tracks you can import your multitrack .wav file in premiere. Then send it to Audition (edit in Audition) and then adobe will convert the file into mono tracks.
You'll find the mono tracks in your audio capture folder or can premiere search for then by 'reveal in explorer'.
The multi track .wav file has got timecode within the file.
When exporting in QT you can also choose for a multitrack audio file. It also contains your timeline timecode.
.avi or .mp4 video files cannot be exported with more than 5.1 channels of audio
MXF OP1a in XDCAMHD can also be exported with max. 16 channels of audio. It also contains your timeline timecode.
Hopefully you can get further with Premiere Pro with this info.
Succes with it!!
gr. Mano

How to export motion to video with audio..urgent

anyone can teach me how to export motion with audio?
cause i add audio when i craeting the motion...but when i export to video, there is no sound produce, only the image...
can tell me how to make it?

Make sure when you export you select the option to include audio. It seems some of the default settings do not include the audio.

Cannot import video and audio

cannot import video with audio
can import audio but with no video

Are you using FCP for the first time?
Have you ever had files that imported correctly?
What format are the files you're importing and where did they come from?
What are your system specs?
Russ

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Exporting a pdf with audio

Hi there,
I am making a pdf that I'm putting online for download. It needs to contain embedded audio files, OR links to the audio files.
I have tried using hyperlinks, but the problem here is that my personal file path gets imbedded. The hyperlinks obviously cannot point to the audio files on my computer alone, but they do need to point to the user's computer. I can not point the hperlinks to the audio files on the web, because they will not be on line. - The audio will be downloaded along with the pdf.
I would appreciate some advice if someone could help.
Thanks!
-Matt

Embed it. Export with Acrobat 6 or higher compatibility.
Bob

Cannot Export MPEG2 with Audio

Similar Messages

Maybe you are looking for