Cannot export one room mailbox but others yes.

Gonna try to be more specific here...
I deleted a user (meetingroom) with an associated mailbox and then restored the user through ADRestore, reconnected the Mailbox but the calendar settings (among other settings) in ECM 2010 give me an error:
"Mailbox /o=Domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT/cn=Configuration/cn=Servers/cn=<server>/cn=Microsoft System Attendant cannot be opened. It was running the command 'Get-CalendarProcessing -Identity 'domain.local/ou/meetingroom'
-ReadFromDomainController"
I've tried to export the mailbox to a pst but that fails too. Both the properties and export-cmdlet work fine on other mailboxes...
I tried disconnecting then connecting the mailbox to a user-type and logon with that user to see if that unlocked it somehow but no luck there either. Is there any hope to restore this room mailbox with its containing calendar, appointments and so on?
I thank you in advance

Hi,
Please run the following command to check whether this room mailbox is still disconnected:
Get-MailboxDatabase | Get-MailboxStatistics | where {$_.disconnectdate –ne $null} | FL displayname,MailboxGUID,DisconnectReason,DisconnectDate
Please disable the mailbox and reconnect the mailbox by using the following command, for example:
Connect-Mailbox -Identity "ConfRm212" -Database "MBXResourceDB" -Room -User "Conference Room 212"
Then check whether the issue persists.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Similar Messages

Cannot export video from iphoto to other location

Hello ,
i could not move video from iphoto to external hard disk or desktop. I'm using Mac Pro with RD. The steps I did as below:
1. Select the video
2. File, export , select origin, ok
3. error message appear stated that video could not be prepared .
Any way to do it ?

The problem is that iPhoto is looking in the wrong place for the file:
/ Volumes/Sagate/Iphoto_Library_2014.photolibrary/Previews/2014....... "
It should be looking in the Originals folder.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My Safari froze, I cannot quit it either. But other apps such as chrome works perfectly fine. What happened?

My safari froze. I cannot quit it, but others like Chrome works perfectly fine. What happened?

Hi s,
Go to Apple menu > Force Quit.

Mail cannot access the mail server, but other email clients do.

My web host recently had extended problems with the mail server my sites are on. Now, Mail on my iMac Intel 27 Duo says it cannot access the server. However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over. I received no system disk for this machine when I bought it. Do I need to reinstall Mail, and if so, how?
The info below from Connection Doctor shows it appears to be trying to access through Port 25 but I have Mail set for 587 as instructed by the hosting company. I have renamed private info in the text below.
READ Jan 16 09:56:42.941 [kCFStreamSocketSecurityLevelNone] -- host:mail.myemail.com -- port:25 -- socket:0x11f51aed0 -- thread:0x122c48a20
250-servername-a41.g.webhostname.com
250-PIPELINING
250-SIZE 40960000
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
250-AUTH=PLAIN LOGIN
250-ENHANCEDSTATUSCODES
250 8BITMIME

However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over.
Well if TB and Entourage can both send and receive but Mail can only send I can only conclude you missed something in you rechecking. Of course with you being the only one checking you are going to make the same "mistake" and never no it. So post the relevant POP server info for your ISP (edit out personal info and passwords of course):
Account Info:
Incoming Mail server: pop server address
User Name:             required user name POP server is looking for (censor)
Password:              password required by POP server (censor)
Advanced:
Port:      995, 25, default?
Use SSL:   yes or no
Auth:      kind of authentication

I want to export one ical calender but that crashes ical

hi
i want to upgrade to the new me calender, but i need to export all my 8 lokal calenders first. 7 worked fine, one crashes ical - and of course it's my word-calender... is there anything i can do to solve this problem?

I have also been having this problem, except today I tried to "trick" iCal and it worked!
For my dad and I (who were working on this problem together), it was always the calendar closest to the top that crashed, but the others exported fine. So today I created a new mock/fake/empty calendar (with a few empty events inside) and dragged it to the top of the list. Then you can actually export the one you want to save (you may still get the spinning pinwheel of death, but don't jump to Force Quit, and it has worked for both of us).
I agree there is still some iCal 4.0.4 bug out there with exporting, but for now this seems to work for us.
Good luck!

I cannot view this beach webcam but others can?

Hi,
I'm a noob to mac's.
I want to view this webcam http://www.mamasbeachcam.com/
I go onto the page and i get to this stage (see pic hopefully)
It stays at this stage and never loads.
I have a friends in the house that have macs and can view it no problem, it is a live streaming cam and great for watching the surf on there machines, there's loads in about 5 secs. Mine, as i said, never loads sooo frustrating...
I have a 3 month old Macbook pro 13", the top spec one.
Mac OSX 10.6.7
Latest Flash player version 10,2,159,1
I have done the software update for both my OSX and flash.
I've tried everything i know:
flash global/site settings, re-installing flash,
I've compared my system to my friends, we have the same OS and flash, on the same network, at the same time, his works, mine not, i've tried when he's not on the network and it still doesn't ever load?
I've contacted the website guy on his help thing and went through settings with him, he had no idea either?
why doesn't it work ...
somebody please help me...
Cheers
phil

It's not loading for me either. I keep getting the loading circle going around. I went and looked at the source code and pulled a URL (http://relay.ozolio.com/) out that links to the server feeding the cam. When I try and access it, it asks me for a password. So there's the problem and reason it's not loading.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Firefox cannot load a certain website, but other people I have talked to can access that same website.

I was at a chat site today, when it suddenly went blank. I tried to go back to that chat site, but I get the problem loading page error, that says Firefox can't establish a connection to the server at that site. I have asked a few people on my messenger if they can get to that site, and they can. Why can't I?

* http://kb.mozillazine.org/Error_loading_websites
Other things that need your attention:
Your More system details list list shows two old Flash plugins.
# Shockwave Flash 10.0 r32
# Shockwave Flash 9.0 r124
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
You can find the old Flash 9.0 plugin file NPSWF32.DLL in the plugins folder within the Firefox program folder (C:\Program Files\Mozilla Firefox\plugins\) and remove that file.<br />
Also remove the flashplayer.xpt file in the components folder, if it is there.<br />
See also:
* http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

Cannot open Yahoo!, Lifehacker but others fine

Using my Macbook, I can (as of yesterday) no longer load Yahoo! Lifehacker and a few other random websites while others function fine. The issues are not with the sites since I can access them from other computers. Any thoughts?
This started after installing the latest update/security but I am not sure if that has anything to do with this.

Hi Heeljim,
Did you try to repair permission?
Try to repair permission everytime you update, remove or install something to your mac.
Finder > Application > Utilities > Disk Utility > Repair permission.
Good Luck.

Why cannot Firefox 8 load websites but other programs can?

Using Win XP there are URL:s which doesn't work at FF 8 but open in Internet Explorer. My friend using Win7 and knows a lot of computers tested same URL:s and told me there's a bug in FF8. When I write for example www.tarjanompelimo.com in address bar or use any links including that URL browser goes to empty index-site but should go to http://www.tarjanompelimo.com/main.htm. In earlier versions of Firefox there hasn't been any problems and it's still working in Internet Explorer.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Firefox cannot load a specific website but other programs can

I have a rare problem with firefox (3.6.18 at the moment)
I have to work with a modified mantis bug tracker and the site wont load (the tab says "Loading..." and the bottom status bar says "waiting yourdomain.com...")
I can reproduce this and seems to be related to the cookies: I have a page with a big image still loading, I submit a form from this page and that is were the problem happens.
From here no page from this bug tracker will load.
This only happens to me with firefox and not with other browsers.
If I clear the cookies, the site will load again.
Hope you can help me
Thanks, Fernando.

You can try to load that page in Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Select: [x] "Permanent Private Browsing mode"
In PB mode Firefox doesn't use the disk cache and the cookies from normal mode.

Deny users right to delete own meetings in room mailbox

Hi there.
I have a room mailbox where i need to deny users the right to delete/edit meetings that they have created.
The rights on the mailbox are like this at the moment
Kalender is the danish word for calender ;-)
[PS] C:\>get-mailboxfolderpermission -identity "Roommailbox":\kalender
RunspaceId : 7634b87a-f0e0-40f7-9ced-165092cd99e2
FolderName : Kalender
User : Default
AccessRights : {Reviewer}
Identity : Default
IsValid : True
RunspaceId : 7634b87a-f0e0-40f7-9ced-165092cd99e2
FolderName : Kalender
User : Anonymous
AccessRights : {None}
Identity : Anonymous
IsValid : True
RunspaceId : 7634b87a-f0e0-40f7-9ced-165092cd99e2
FolderName : Kalender
User : F-Lon
AccessRights : {Editor}
Identity : F-Lon
IsValid : True
Is it possible to do this?

Hi Jesper,
According to your further description, I now understand that the requirement is that you want to deny users cancel meeting in their own calendar instead of directly deleting items in room mailbox. But canceling a meeting is a default right for users who
is the organizer of this meeting and it is by design.
I have tried to create a transport rule as a workaround to reject canceled meeting message transport in my test environment:
Apply rule to messages
Sent to ‘[email protected]’
And when the Subject field contains
‘Canceled’
And if the message type is ‘Calendaring’
Send ‘cannot cancel this meeting’ to sender with
‘5.7.1’
Except when the message if from ‘[email protected]’
But it failed, it could reject the meeting being deleted from the room mailbox but it deleted all meeting information in attendees’ and organizer’s calendar.
Therefore, it cannot be achieved to deny users to manage their own meetings as an organizer. Maybe we need to find another ways to manage your summerhouse.
Best regards,
Winnie Liang
TechNet Community Support

IPhone 5 wifi works in one room but not the other.

I have an iPhone 5 and the wifi is unreliable. It works in the room with the router but when I walk down the hall it doesn't work. I'm talking 20 feet away. So frustrating because the phone is almost worthless. Why would it connect but only in such close range? No other devices have this problem. Yes, I've turned the wifi on and off. Yes, I've restarted the router. Yes, I've checked the WEP. It just makes no sense that it would work in one room but not the next room. Help!

Hello Gnpco,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Best of luck,
Mario

Hello ... I have a problem with a wifi connection speed on my mac pro ... the problem is that in one room the internet opening for the websites is extremely slow ... but when i move the mac pro somewhat to other location ... the internet speed increase

hello ....
my connection problem on my mac pro is :
that when i try to open a website on safari .... it delays ... and takes more than 30 seconds to open completely ...
but when i move the mac pro to another location ... its internet opening speeds up ....
also in one room ... web opening delays .... but on other rooms it is normal
so what can i do to solve this problem ....
Note : also when i hold it up and move in the same room ... the speed changes and somewhere speed up ... and in another location speed down ..
thanks for you all ...
Waiting for your support ... as quick as possible ...

WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
https://www.open-mesh.com/

WiFi on my MacBook Pro works in one room but not in others

If I bring my MacBook Pro next to an iMac in one room it will connect (albeit slowly) to the internet. When I walk 2 metres into my own bedroom it simply disconnects and stops working, while my phone stays connected and at a similar speed.
The MacBook will recognise my WiFi, and will ask me for the password, even though it's been entered dozens of times. When I enter this password it says it's incorrect. If I then walk back into the other room WiFi rrconnects.
What's wrong here?
My MacBook Pro is a late 2011 13" model.

Wireless interference, probably, but Apple's Wireless Diagnostics may supply some additional helpful information.
To use it, hold an option key while you click your Mac's Wi-Fi icon, and choose Open Wireless Diagnostics...
The following authentication dialog will appear:
Authenticate with your Admin password, then click the Continue button in the following:
The network analysis and diagnostic tests will take several minutes to complete:
When it completes, if your wireless network is functioning properly the following will result:
If something is amiss, supposedly the results will be different and you will be presented with helpful information.
Assuming your connection is "working as expected" select Continue to summary and click Continue:
Ignore the pre-populated text field, which is provided as a place for you to type in additional information should Apple ask for it in the course of obtaining technical assistance from them. Apple has no way of knowing where your router is located in your home, and certainly doesn't know if you even have an upstairs bedroom closet.
Click Continue.
The next step will also take a few minutes:
When it finishes, you will be presented with a summary that may or may not be useful to you:
The above result is uninteresting, but if there are additional actions for you to consider they would be included in the screenshot above.
The WirelessDiagnostics-xxx.tar.gz file deposited on your Desktop can be dragged to the Trash, or you may wish to expand it and examine its contents. It's up to you.

Garageband 10.0.2 won't export one song to iTunes but has no problem exporting others

I'm still getting used to the new Garageband and I'm liking it a lot so far. I had just finished editing a song before I updated and am now trying to export that into iTunes with the new Garageband. I get to the part where it says "Bouncing...," but it hardly gets a minute into this before that little window disappears and nothing exported. I've already sent a few previous Garageband files and some new ones to iTunes, but this one seems to be giving me trouble. Any idea what's going on?

I too can not export my presentation to Powerpoint. The presentation was originally in powerpoint and I imported into Keynote. Now I wanted to export it to let some others work on it. I receive this error below when I try the export.
"An error occurred while exporting your document to powerpoint."
I have tried some of the suggestions from other posts regarding exporting to qt like uncheck close after last slide and trashing the com.apple.iwork.keynote.plist file. Neight of these worked in my case with Powerpoint.

Cannot export one room mailbox but others yes.

Similar Messages

Maybe you are looking for