Cannot export to QuickTime file with PE8

Hello,
I have an issue when I want to export my video choosing My Computer, QuickTime. The e^port cannot start, APE8 stop immediatly after launching export (message : unxpected errors; PE8 must closed).
I already uninstall and reinstall Quicktime (last version), same pb. I also uninstall and reinstall PE8, with the update, same issue.
I do not know what to do.
I cannot have files MOV to export to Youtube (also the direct export to Youtube from PE8 is still not working, I have a serveur error, already dscribed by other members, but means to have no solution)
Eric

I'm sorry, Eric. I have no solution for you. If your computer is crashing whenever you select Share/Computer/Quicktime and your unable to install a program update, there may be a problem at the operating system level.
How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is onyour C drive?
The best solution, assuming your computer is well tuned, would be to upgrade to version 11 of the program. Version 8 was notoriously buggy and does not work at all well with AVCHD video.
Video 11 edits AVCHD natively and has been optimized for this format. You may be able to find a good deal on the software on Amazon. It would certainly save you a lot of aggravation if you spent the few dollars on it.

Similar Messages

  • Play a QuickTime file with eight separate audio channels

    I'm trying to play a QuickTime file with eight separate audio channels but they only play in stereo......  the same QT file will play all 8 channels separately in Qlab, which has separate level controls for each channel, and which "sees" my Digidesign 002 audio interface.  But QT does not recognize the interface, nor does Audio MIDI Setup utility, apparently.....  it will play all 8 channels mixed to stereo through channels 1 and 2

    The following will answer both your questions a) and b).
    Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
    Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
    Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
    In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
    Then just go down through your music and effects audio tracks and assign them accordingly.
    Now, when you export your timeline as a self-contained media file, it will have different audio channels.
    I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

  • Export .m4a Audio File with Cover Art?

    Hi, I recently upgraded to GarageBand 10.0.1 after purchasing a new MBP and have been mostly successful in finding all of the changes in the app, except this one.  I use GB to create an audio podcast weekly, and in previous versions, I had the ability to export an audio file with the iTunes cover art already attached to it.  I cannot find this feature in GB 10.0.1.  Am I missing something?  Thx for your time and any help given.

    That is disappointing. Usually Apple is better about taking away steps to creating things, not adding to the number of steps required to create things.
    GarageBand has been released a bit early. I am hoping, there is more to come. Otherwise, the installer would not have left the old version installed. It is a clear sign, that Apple knows, that some important features are still missing in GB 10.0. For the time being, I am starting the projects in GB '11, and add the finishing touches - drummer, arpeggiator in GarageBand 10.0.

  • I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

    I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as  I have associated .pdf files with adobe reader. My operating system is windows 7.
    When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'.  I have not changed my security settings (Tools, Internet Options, security).

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?

    I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?  Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

    leonieDF
    Thanks for your response.  My profiles are located within color sync utility as you can see here:   
    These profiles do not respond to clicking and dragging.  Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them.  Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement.  I have never needed the CMYK profile until recently, and that need has now past.  However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices).  I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space.  I don't face these restrictions with all the others, so it remains a curious circumstance for me.  I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether.  Again, many thanks for your attention to this matter.  The reach of this community is astounding.

  • Weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non clusterable object with jndiName ]

    Hi,
    I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
    I am getting following error during deployment.
    Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
         Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
    Unable to deploy EJB: SampleBean from Sample.jar:
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
    clusterable object with jndiName ]
         at weblogic.utils.Debug.assertion(Debug.java:57)
         at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
         at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
         at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
         at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
         at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
         at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
         at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
         at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
         at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
         at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Any clue?, what its talking about?
    Thanks
    Naresh

    Hi,
    I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
    I am getting following error during deployment.
    Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
         Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
    Unable to deploy EJB: SampleBean from Sample.jar:
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
    clusterable object with jndiName ]
         at weblogic.utils.Debug.assertion(Debug.java:57)
         at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
         at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
         at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
         at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
         at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
         at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
         at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
         at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
         at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
         at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Any clue?, what its talking about?
    Thanks
    Naresh

  • After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

    after exporting to quicktime file, the file has sound but no video, what am I doing wrong?  The self contained movie box is not checked.

    Hi
    Did You go via Compressor ?
    Did You use QuickTime Conversion ?
    I don't
    I do
    • In TimeLine set In and Out-Points to the full Movie/Project
    • Select ALL - Clips and Audio
    • Go up to Sequence and down to Render Only - down to Mix Down Audio
    • then Sequense and Render Selected - Both (Video and Audio)
    • then Export and as QuickTime .mov (NOTHING ELSE)
    • I use to do - Not Self-Contained as it saves both time and space
    Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
    Good Luck - Yours Bengt W

  • I cannot import a Quicktime file (.mov) which I generated from a slide show out of iPhoto8 in iMovie8 (filename is grey); what did I wrong?

    I cannot import a Quicktime file (.mov) which I generated from a slide show out of iPhoto8 in iMovie8 (filename is grey); what did I wrong?

    iMovie 08 will only import files that contain codecs that it can edit. It will generally import audio and video codecs that iPhoto generates. However, if your iPhoto slideshow contains a manual advance track, iMovie cannot edit this and therefore will not import. In iPhoto, check to see if you can do a timed advance rather than a manual advance. Then it should import.

  • Export JPEG-XR files with CS5.5 ?

    Where do I get a plugin to export JPEG-XR files with CS5.5 / Photoshop 12.1?
    This posting asks is there is interest for a native implementation... I am ok with just a plugin to just try it out.
    http://forums.adobe.com/message/3434789#3434789
    Does this exist?

    I am not sure then how Adobe expects developers to use the format in flash 11:
    http://www.bytearray.org/?p=3216

  • Every time I am trying to open Quicktime files with my Quicktime it wants to convert the files. Why?

    Every time I am trying to open Quicktime files with my Quicktime it wants to convert the files. Why?

    QuickTime version 10.3 will "convert" older legacy codecs into a more modern version. You can save this newer version and delete the older one.
    This can only mean that support for those codecs will be removed completely some time in the future.

  • Cannot open any pdf file with safari

    cannot open any pdf file with safari

    download adobe acrobat reader for free,  saves all PDF files and ideally open under Acrobat
    there are much more options for using and viewing the options native in Acrobat than in Safari, obviously.

  • I'm attempting to export a quicktime file to an AVI file via quicktime pro. Which settings would yield an uncompressed AVI file? There seem to be just a few options, would I choose cinepak?

    I'm attempting to export a quicktime file to an AVI file via quicktime pro. Which settings would yield an uncompressed AVI file? There seem to be just a few options, would I choose cinepak?

    Asking in the wrong place, twice, will not give you an answer http://forums.adobe.com/thread/913390
    Since it appears you did not read the reply in your other message, maybe you will read this reply
    Click http://forums.adobe.com/community/premiere/premierepro_previous

  • How do I export from FCP to a QuickTime file with multiple audio channels?

    I'm delivering a project where the first step is to generate an HD Cam SR master, which I will be doing at a post-production lab. They will then do a QC check for me. To generate this HD Cam SR master, they need to me to bring in my 98-minute long movie on a firewire hard drive, in five equal parts -- QuickTime files. From these five QT files, the lab will then be creating an HD Cam SR master that will have...
    dialogue on tracks 1 and 2
    effects on tracks 3 and 4
    music on tracks 5 and 6
    MY QUESTION
    a) I don't see any way to separate these audio tracks accordingly in the FCP menu for QuickTime export. Does anyone have any experience doing this?
    b) And does anyone know the most efficient way to combine timeline audio tracks for this purpose? I have my dialogue sitting on the first FOUR audio tracks, actually. To deliver this film, I'll need to crush these four audio tracks to two, as listed above. I could generate an AIFF file, I suppose, import it back onto the timeline, sync it up, and then re-export along with the visuals to make the final QT file, but this seems like a generation loss.
    thanks,
    Shanked
    PS the movie is made up of footage from a Sony PMW EX1. I used the codec "XDCAM 1080 24p 35mbs VBR" for editing in FCP. I'll either export to QT using this same codec or switch to "Apple ProRes" if my machine can somehow maintain the sync.

    The following will answer both your questions a) and b).
    Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
    Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
    Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
    In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
    Then just go down through your music and effects audio tracks and assign them accordingly.
    Now, when you export your timeline as a self-contained media file, it will have different audio channels.
    I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

  • Export QuickTime file with new audio and maintain the file size and quality as the original.

    I shot some footage for a client yesterday and ran into an issue. To make a long story short I have QuickTime mov files shot with my Panasonic GH4 that have a buzzing sound in the audio track. I have clean audio from a recorder that can be sync'd. Is there a way for me to do this for the client and deliver them as the same QuickTime file but with the clean audio and keep the file size close to the original and not have quality loss in the image?
    If so I will probably put all of the spanned clips together from each interview and sync the audio before delivery. I am just not sure which codec will give the client the same quality footage compared to the originals and not have a massive difference in the overall file size. They did request that they be Quicktime MOV files though so that is a must.
    I don't see this as an option in the codecs in the export settings in PP, but is there a way to export as ProRes or another MAC native codec that will save them from having to convert it on their end? I am on a PC with Adobe CS5.5 so I am not too familiar with MACs, but from what I understand they would need to convert the files if I sent them straight out of the camera.
    I found some related search results for this but they pertained to "Best quality" for export. I am not sure how the varying options work but I don't want to create files that are considerably larger, just not less quality.
    If anyone has experience with this it would be greatly appreciated.
    Thanks,
    Cole

    Here's the workflow: I imported the video footage into iMovie '08 and did my edits. Then I exported it (share) to my desktop with compression set @ 740 X 480. Then I used QuickTime Pro to fix the audio track. The file plays perfectly with both audio tracks working. It's a QuickTime file (.mov).
    I hope this jars any replies as to why the file when uploaded to my iWeb gallery drops the second audio track.
    Hmm,
    Jack

  • Can Not Share a QuickTime file in PE8

    System:
    Dell XPS, i7 CPU, 6gig RAM, Win7 64bit
    Adobe Premiere Elements 8 (I tried to install 8.01 update and it says the program is up to date but the About window still says 8.0)
    1,14TB, 2 disks as Raid 0, 187 gig free., HD WEI – 5.9
    NVIDA GeForce 889 GTS, latest drivers (8.17.12.5896), 320mb RAM, Graphics WEI – 6.7
    Dual Monitor setup
    Apple QuickTime v7.6.8
    Assets & Project:
    All projects, new, or old. Any content (video or just images or a combination of both)
    Problem:
    I cannot create a QuickTime movie from a project. It tells me the (when I go to the choose location and setting window) “Export Settings Invalid” and I cannot do anything in that window except to the back button. The preset dropdown is empty.
    Please see the pciture.
    I can not share with a Mac right now and need to do so.
    Thanks in advance

    As I said in your earlier thread, your hard drive is very full, so make sure you've given it a fresh defrag so that all of your free space is contiguous. (Deleting tmp and other junk files is also a good idea, per the maintenance regimen in my books in and in our FAQs.)
    Your panel seems awful small. Does resizing it larger make any difference in the number of options that are available?
    I see you have the latest version of Quicktime. That's good.
    But you may need to uninstall and reinstall Premiere Elements. It appears that something didn't quite take.

Maybe you are looking for

  • Problem with inserting a row in the current table

    I am working on Html editor using swings. actually i am trying to insert a row using private void insertTableRow(int cols)           StringBuffer sRow = new StringBuffer();           sRow.append("<TR>");           for(int i = 0; i < cols; i++)       

  • Can't change e-mail addresses in Server 4.0

    I have noticed that whenever an e-mail is sent to a user on my server, a response is sent out to the sender from [email protected] saying "Recipient address rejected: User unknown in local recipient table". I went into the open directory tab on Serve

  • Connecting to Printers in a Windows Network

    So this week I finally got the first Mac in my family. We currently have a PC network set up with three desktops and a few laptops, with one desktop acting as a printer hub. My new computer can connect to the network for Internet capabilities, but it

  • My ipod got wet and half works

    my ipod got wet and still turns on but doesn't work when i plug it into my laptop

  • Each time I connect my library column prefs have reset again

    As I've done in iTunes, I have the main music library columns set to show only those that I'm interested in. Yet no matter how many times I do this with the iPod, the columns have always reset to factory default the next time. It seems like it must b