Cannot Export without rebuild

Been using Aperture 3 since day announced. Now before I can export anything I have to do a rebuild. As long as I don't exit Aperture after the rebuild I can continue to export. If I exit Aperture, then I will have to rebuild before I can export. I have tried all the variation of exports with no luck. Works beautifully after a rebuild. I have about 28K photos in my library.

Media encoder sucks! It's slow and buggy. And it crashes 5 times at 10. The performance of Premiere CS4 on a top notch workstation is 60% slower than working with Premiere Pro 2. Media's batch feature is a failure unlike Premiere 5.5 - 6.0 ver (i think)
my dear Adobe
Why not try listening to pro users suggesting handy features and instead of getting so anxious eliminating your competitors (FCP) and launching buggy and expensive software? This ain't gonna last for long, you know!
I think if I simulate OS X and run FCP, will work faster than CS4 (have to test it)

Similar Messages

Cannot export to movie without media encoder!

Past workflow has involved exporting an avi to a watch folder. With CS4 I cannot export an avi without using the media encoder. I see no problem with using the encoder to do the work, but there are instances when I would want to export "same as source."
Pre-rendered elements
Export edited segments to other edit suites
Utilize a second computer system to do the encoding
Use other encoding software
It is much slower to export an avi using the media encoder rather than the export > movie route of the previous cs versions. For example, I edited a 3 minute video on cs4 and it took 11 minutes to export as an avi. It actually took even longer (up to 20) to use encore's transcode settings to encode for dvd.
I ran a test on cs2 with a 30 second spot. It took about 15 seconds to export the avi and another 15 seconds to encode as mpeg2 using a 3rd party encoder.
I have a project coming up that has an extremely tight deadline. I will be editing hour long programs and exporting them for dvd. If I am to use cs4 I will have all kinds of time problems, not to mention I can't do this on multiple computers for processing (1 for editing, 1 for encoding, 1 for authoring). Just to estimate: In CS2 it will take 1 hour to export and encode the video, and up to 7 hours to encode if I were to use cs4.
Are there any solutions to the mandatory media encoder process of cs4?

Media encoder sucks! It's slow and buggy. And it crashes 5 times at 10. The performance of Premiere CS4 on a top notch workstation is 60% slower than working with Premiere Pro 2. Media's batch feature is a failure unlike Premiere 5.5 - 6.0 ver (i think)
my dear Adobe
Why not try listening to pro users suggesting handy features and instead of getting so anxious eliminating your competitors (FCP) and launching buggy and expensive software? This ain't gonna last for long, you know!
I think if I simulate OS X and run FCP, will work faster than CS4 (have to test it)

Cannot Export some pictures in Iphoto 09

Hello!
Somehow, I cannot export some of my pictures to folders,... I did work before.
Anyone knows what to do?
Thank you!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Cannot export video clips. Get message: "unable to create video for export"

Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GB

Yes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function.

Cannot export video from iPhoto

cannot export a video taken from an iphone. from iphoto to anything, it saves it as a 0.00 second movie file.
and yes before you ask i am changing it to original file :/

The problem is that iPhoto is looking in the wrong place for the file:
/ Volumes/Sagate/Iphoto_Library_2014.photolibrary/Previews/2014....... "
It should be looking in the Originals folder.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I have IPhoto version 9.5.1. I cannot export pictures, the following message appears: "iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library." What am I suppose to do? I have a Mac mini.

I have IPhoto version 9.5.1. I cannot export pictures since the following message appears: "iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library." What am I suppose to do? I have a Mac mini which properly used can perform any reasonable task, the problem is I do not know what to do.
Any help will be appreciated.

Hmm... that was labelled:
As a Test:
In bold and all
Try repair the main Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I cannot export to "Uncompressed 10-bit 4:2:2" format. Help!

I need to deliver clips to a stock agency but I cannot export the footage from iMovie with the uncompressed format I need. Not in iMovieHD, nor in iMovie8, nor in FCE. I tried it with a 10 second clip, so it can not be the length or files getting too big!
So what happens?
Exporting to Uncompressed 10-bit 4:2:2
If I try this setting, on all occasions iMovie simply crashes and I get the "iMovie quit unexpectedly" window. The same thing happens in FCE.
Exporting to Uncompressed 8-bit 4:2:2
When I export using this seting, iMovie SEEMS to export the file as it should. But when I open the file in Quicktime, the timebar indicates the full 10 seconds, but the video & audio freezes after about 1 or 2 seconds, the clip keeps playing and I hear & see the last second of the clip again. The same thing happens with files exported with this setting in iMovieHD, iMovie8 and FCE.
I've read on the forum that I should not worry about the quicktime movie not playing right, because the file can be imported into Final Cut without any problems. So I try not to worry about this and hope the stock agency can work with the files... But that still does not explain why I cannot export to 10-bit 4:2:2 without my video programs crashing!
And yes, I've also tried doing this on my Macbook with Intel processor. With the same result.
Can somebody please help me with any suggestions? Thanks!!
Daniëlla

You don't say what's the source of your clips.
If standard DV (..though I doubt that an agency would accept standard def video any more..) NTSC DV is compressed in the camera as 4:1:1, and PAL DV is compressed as 4:2:0 ..so you won't get true 4:2:2 from normal DV, unless you're using a broadcast camera (..probably feeding into the capture device via SDI inputs).
If the source was tape-based HDV or any other hi-def source, then iMovie converts that, during import, into Apple Intermediate Codec, and wouldn't be able to output proper Uncompressed 4:2:2 material.
For Uncompressed 4:2:2, I think you'll need to be using a dedicated capture card - and massive-capacity hard discs! - to be able to import the material in the first place.
iMovie certainly isn't the program to handle pro video of this nature.
Ask in the Final Cut Pro Discussions..
"..I've also tried doing this on my Macbook with Intel processor.." ..but maybe that's just not fast enough (older Mac portables have "shared graphics memory" ..meaning their graphics processor may have to compete with the main processor to temporarily grab free RAM)!

IMovie for IOS Cannot export 60p despite iPhone 6 capability to shoot 60p

Hi,
iMovie for IOS Cannot export 60p despite iPhone 6 capability to shoot 60p
I am obliged to use Pinnacle Studio for IOS 8
I have bought a superb iPhone 6 Plus, shooting in 1080/60p, I cannot edit my clips to build a 60p Master.
I understand the choice for shared video streams to use 720/30p 5Kb/s from my 1080/60p 25Kbps clips as it has to be streamed even on small PC.
But if I want a master file 1080/60p at 25Kbps, and send it by mail with the superb new Cloud Mail to my mac mates, I cannot do it
I need a master hacker to poke this 60 number I nee somewhere into iMovie, it should be somewhere in the compressor frameworks used by iMovie in the app Package for exporting.
SAME PROBLEM WITH I MOVIE 10.0.6 FOR OSX YOSEMITE,
Best regards to the community

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

Cannot export from Lightroom 5.6 to jpg, Internal error has occurred, attempt to perform arithmetic on a nil value

Hi everybody,
I run Lightroom 5.6 on Windows 8.1. It's been a while since I exported anything and now I find that I cannot export to JPG.
I get an internal error, " attempt to perform arithmetic on a nil value" .
I remember that I used to have this situation before (different error) with previous versions. Than it was usually the "perform after export" that was without value.
However it is set ti " Do nothing" .
I've searched the web and found nothing. Anyone got an idea what the cause could be?
Thanks
Bob

Hi there,
so I found something! I was wondering why the "publish on harddrive" process did work, but the export to harddrive not.
So I looked in the difference of the presettings and found only the different options "choose export folder" and "predefined export folder" (don't know the exact translations, as I use the german version, but I hope you find what I mean.)
So I changed in the export settings the export folder to a fix predefined folder and there you are, export is working again!
Don't know the relation to the GPS-data, but anyhow.
Hope this helps to solve the problem?
Don't know if MS windows did an update which causes the error, but I didn't changed anything in lightroom as it worked before without these settings.
And of course in the long rund I would like to go back to the "choose folder" option, as I know have to copy the images to the right folder after export which is not a smooth process..
regards
_ulf

I cannot export mailboxes

Using Mail in 10.10.2.
I cannot export any mailbox. The "Export..." option remains grayed out no matter what I select.
This occurs with several different accounts as well as the "On My Mac" local storage. Otherwise everything acts as expected.

Same here, iphone 5s / ipad 2.
I found that the used movie snippet caused imove not to export.
I used a clip from whatsapp chat, iphone was able to play the clip, imported into imovie, imovie also played it back but exporting failed.
Then i tried pinnacle studio on the ipad, imported the clip, tried to export - also fail. Imported again, added a picture before the clip and some text, pinnacle rendered now the movie and exported.
I was able to import that new clip, into imovie and edited etc wihtin imovie, after i have done some changes imovie was able to export the movie without amy problem.
So it might be a system-wide problem with ios 7 as pinnacle got also several problems with some sources.

Moving to a new SCVMM server and a new database without rebuilding networking on Hyper-V hosts

Environment: We currently have a single front-end SCVMM server running WS 2012 and SCVMM 2012 R2 UR2. We have 4 Hyper-V clusters that SCVMM manages. All teams and vNICs on those hosts were created by SCVMM. We are using a standard VLAN setup
(no network visualization).
Problem: We have some issues with coruption in our SCVMM database that are not fixable and have existed too long for us to restore the database from our backups. We built a new SCVMM server running WS 2012 R2 and the same version of SCVMM. We
copied over the library share contents and made equivalent entries for all aspects of networking (logical networks, VM networks, port profile, port classifications, etc.) in the new database. When I re-associate a cluster with the new SCVMM server it
imports the cluster and nodes successfully, but doesn't understand that the logical switches created by the old SCVMM server are in fact logical switches. It sees them as standard switches.
Essentially, my question is how do you move between two separate SCVMM environments without rebuilding all your network configuration from scratch?

Since your source and target platform all little ENDIAN format. Cold copy from OS level is fastest and easiest way.
If you plan to reorg the tablespace along the way, you have to do export/import, use data pump since you are on 10g.

REP-1401: 'no_daysformula':Fatal PL/SQL error occured. ora-06503: PL/SQL : Functio returned without value. REP-0619: You cannot run without a layout.

Hi everyone.
Can anyone tell me what is wrong in this code below?
Code:
function NO_DAYSFormula return Number is
begin
IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT>:P_FR_DT
THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:P_TO_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT>:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
END IF;
END;
It gets compiled successfully but when i run the report, i get 2 errors.
Error 1:
REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
ora-06503: PL/SQL : Function returned without value.
Error 2:
REP-0619: You cannot run without a layout.
Should i use only 1 return statement?
Can i use as many return statements as i want?
What is the exact mistake? Please let me know.
Thank You.

Let me clear you the first thing...
If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
REP-0619: You cannot run without a layout.
So you just correct the function 'no_daysformula' .
First of all you run the report without that formula column.
If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
As function will always return a single value, Check your formula 'no_daysformula' returns the same.
declare a return variable say for example..
DECLARE
V_DATE DATE;
BEGIN
--YOUR CODE---
RETURN V_DATE := (RETURN VALUE)
END;
Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
If any Problem persists let me know
Regards,
Soofi.

CRVS2010 Beta - Cannot export report to PDF with unicode characters

My report has some unicode data (Chinese), it can be previewed properly in the windows form report viewer. However, if I export the report document to PDF file, the unicode characters in exported file are all displayed as a square.
In the version of Crystal Report 2008 R2, it can export the Chinese characters to PDF when I select a Chinese font in report. But VS2010 beta cannot export the Chinese characters even a Chinese font is selected.

Barry, what is the specific font you are using?
The below is a reformatted response from Program Management:
Using non-Chinese font with Unicode characters (Chinese) the issue is reproducible when using Arial font in Unicode characters field. After changing the Unicode character to Simsun (A Chinese font named 宋体 in report), the problem is solved in Cortez and CR both.
Ludek

You cannot export the request at the movement -while releasing the request

Hi.. Experts
Today, we had message from our functional consultant that When he is trying to release the TRANSPORT REQUEST (not tasks) he is getting the error " You cannot export the request at the movement "
After 2 / 3 hours, we discovered file exists in Transport Profiel directory
" /usr/sap/trans/bin" directory Fine Name : T_OFF.ALL
After removing that file - The request releasing were happening normally.
In this juncture, Even though the issue is fixed ,
We would like to learn how this file got created and which transactions / which configurations will create this T_OFF.ALL file and stops all Transport releases
Thanks in advance
Rgds
PR

This file T_OFF.ALL has to be created manually in the bin directory to basically stop release of any transport request from all systems. No transaction creates it .
Please go through the links to get more info on this mechanism.
[is there something like NOIMPORT.<SID> but with exception list;
[http://help.sap.com/saphelp_40b/helpdata/fr/3d/ad5ad84ebc11d182bf0000e829fbfe/content.htm]

I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you co

I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you confirm this is intended to happen, or is it already in process. While awaiting for this essential development, can you please suggest any way of transferring information either way?

spicer_the_coalman wrote:
I cannot export projects from GB in my MacBook into GB on my iPad3
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbxtogbi
(Let the page FULLY load. The link to your answer is at the top of your screen)
spicer_the_coalman wrote:
nor can I export from IPad to my MacBook.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
(Let the page FULLY load. The link to your answer is at the top of your screen)

Cannot Export without rebuild

Similar Messages

Maybe you are looking for