Cannot Fax from Satellites to Lexmark 1270

I have a Toshiba Satellite A135-S2306 connected to a Lexmark X1270 that I want to use to send faxes. The laptop has Toshiba Software Modem for the modem driver. When I try to configure a fax driver in the Lexmark All-In-One Center (1200 Series) software, the only options it gives me are "Lexmark All-In-One Center (1200 Series)" and "Microsoft XPS Document Writer".
Can someone help me?

The Lexmark X1270 does not include fax functionality, according to the product specs:
http://www.lexmark.com/lexmark/product/home/542/0,6970,204816596_653399443_703929886_en,00.html?tabI...
A205-S7442
C2D 1.5
4GB Kingston Value RAM
120GB Fujitsu HDD
Windows 7 beta

Similar Messages

I cannot fax from my Officejet 8600 Plus.

It has faxed until now. However, when I look at all of the Fax items in the 8600 display, they read: "This feature has been disabled. For more information contact the administrator." I have also seen references to the Setup.
FYI. I cannot use the Test Fax feature or any other way of determining the source of the problem or the cure, because whenever I try I get the same message, above.
How can I enable the Fax part of the 8600?

hi,
"This feature has been disabled. For more information contact the administrator." is due to your Fax function has been disabled, please following below steps to enable fax for your printer.
Precondition: Make sure your PC and printer are powered on and connected to network.
1. Follow these steps to open the printer's EWS:
     Open an Internet browser.     Enter the URL of the printer in the address box, and then press Enter.
2. Enable Fax from EWS
     go to Settings -> Administrator Settings page
     Enable the option "Fax" and Apply.
I work on behalf of HP. I am speaking for myself and not for HP.
Mango

Cannot fax from my iMac to my Officejet Pro 8500A Plus A910g

I have researched HP help and followed the directions on how to add the fax to my available printers, but when I try to fax a document, the printer prints 3 pages with one line ofcode on each but does not fax the document. If I use the fax feature on the 8500A, it works as designed. I can scan from the 8500A to the iMac and print from the iMan to the 8500A. I would like to be able to fax documents from the iMac without printing them and then faxing.

Hi A-BPlumber,
I would like to help you be able to send a fax from your mac without having to print it. Please ensure you are choosing the Fax driver next to the printer selection in the 'print' dialog box.
Please take a look at the following document to ensure you have all of the appropriate settings correct; Sending Faxes Using the Fax Utility - Mac OS X
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot fax from screen on 6310.

Printer and fax were working fine but could not fax from screen. In trying to upload a new driver I messed everything up. Now in order to update I need to find driver that works. Apparently the 6310 has been discontinued with no updates available. Win XP. IE8. All help appreciated.

to be honest i have no idea then.
But in your logs i see:
18 16:47:55.138: //1866/5BE70897804F/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x466E185C, Tag=0x0, Call Id=1866,
Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0)
and Cisconnect cause 47 means: Resource Unavailable, Unspecified. This cause is used to report a resource unavailable event only when no other cause will apply.
Maybe you'd better to investigate your faxserver....

Cannot fax from my 8600 printer. I have wireless connectivity -- no active telephone line.

I am using Windows XP, and an HP OfficePro 8600 All-in-One. I cannot send or receive faxes. I ran the fax test and according to that, I have to have an active wall jack. I have wireless connectivity for computer and TV. Is there a way to make the fax work? Will appreciate any help. Thanks.

Hi,
This is vignesh B.
Welcome to HP Consumer Support Forum. I am happy to assist you!
Please use this link to get more troubleshooting steps :
I see here that you are not able to send / receive fax.
We need to have the active phone jack connected to the printer from the wall outlet.
Only then, printer will start sending / receiving faxes.
Please make sure you connect the two conductor faxing cable that comes along with the printer.
If you have the printer software installed on the computer.
Please open that printer software where you will get an option to run the fax setup wizard.
please try to send fax once you are done with the fax setup wizard.
Please contact 1-800-474-6836 for any assistance. We work 24*7.
Thank you for choosing HP. Have a wonderful day ahead.
I am an HP Employee.

Faxing from MS Word using OS 10.7.5

I just updated to MacOS 10.7.5 and I can no longer fax from within a Word document. Printing works fine. I have an Officejet Pro 8600 Plus. I updated all of the software to the latest available on the HP site. I print and fax wirelessly from a white Macbook.
When I go to File --> Print and change it to the fax function, I get an error message that says "Software is available from Apple Would you like to install it?" When I click ok, it pauses for a bit and then says "finding software." It then comes back saying "No other information is available about the problem." Then it stops.
What do I need to do in order to be able to fax from within my Word document? In OS 10.6.8 it worked just fine (then I had to mess it up by upgradng the software). I am sure there is a way to fix this and hopefully someone out there knows what it is.
Thanks so much.

Hi mrcnidaria,
Welcome to the HP Forums!
I understand that you cannot fax from within a Word document on your Mac OS X 10.7.5 with your HP Officejet Pro 8600, ever since upgrading from Mac OS X 10.6.5. I am happy to help you with this issue!
Please try the following solutions:
Reset the printing system. Mac OS X: How to reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
Uninstall the software. Uninstalling the Printer Software.
Re-install the software. HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8.
Hope this helps you resolve your issue, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I can't fax from my Photosmart 7510.

Please e-mail me at {Personal Information Removed} my old e-mail no longer works.
I am set up with eFax and ePrint, but I cannot fax from my Photosmart 7510. What do I do?

Hello again thelids,
Please for your privacy, do not post any iformation that can identify you, such as email addresses, or phone numbers. Now if you will go here and follow the steps under "Send a fax" it will tell you how to send a fax via eFax. Honestly it is pretty much the same as sending a fax the traditonal way. Just touch eFax, dial the number, put want you want to fax on the glass, or through the feeder no top, and start the fax. If you need anymore help, let me know.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

8600 FAX address book - Faxing from MS Word 2010

HP Officejet Pro 8600 Premium e-All-in-One - N911n FAX
When I FAX directly from Word 2010 / Win7Pro 64 desktop to the 8600, an address book of sort pops up. I have several numbers in it now. It’s there the next time I FAX.
It is NOT speedial – that is empty except the factory inserted faxback number.
I cannot find the software access to this address book. I think back in the G85 days, one would just bring up the main printer software, click on FAX, and there was an entry for the address book. I could be wrong – I didn’t use it much. Didn't the software actually give you direct access to the speeddial? BTW - what a pain - how many steps to get to speeddial on the 8600? about 312?
Anyway – what is this address book, and how do I get software access to add/edit etc. Or, do I have to pretend to want to send a FAX to get to it everytime?
All software and drivers current to last week.
[man, ain't this printer the greatest - i made the mistake of buying my first and last Lxxxxxk a few years ago - this 8600 printer worth every penny - those that make a BIG fuss about their ink economy - NOT. the 8600 ready to go no matter how long it's been sitting. That was the only non-HP printer i have bought in my 40+ years of using printers - thanks, HP.]
(it said i had invalid HTML - and it changed the message - I can't see it)

Hi mrcnidaria,
Welcome to the HP Forums!
I understand that you cannot fax from within a Word document on your Mac OS X 10.7.5 with your HP Officejet Pro 8600, ever since upgrading from Mac OS X 10.6.5. I am happy to help you with this issue!
Please try the following solutions:
Reset the printing system. Mac OS X: How to reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
Uninstall the software. Uninstalling the Printer Software.
Re-install the software. HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8.
Hope this helps you resolve your issue, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Cannot receive fax from one telephone number

I cannot receive faxes from one specific party, connects and then says it fails to receive.

Hi,
Please check the sender to see is it a silence number ? or using any filter ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite U925t cannot boot from USB

Hi
I cannot boot from USB flash drive on Satellite U925t. I use bootable USB flash drive inserted (Hiren Boot 15.2, sure booted on another laptop), restart the system. When the splash screen is displayed, press F12 to access the boot menu, selecting USB - but laptop no boot from USB.
Please, Help me.
Thank you very much

From within Windows, try holding SHIFT when you select Shut down. Is there any change then?
Also, try entering the UEFI settings, disabling Secure Boot, and changing UEFI to CSM.
- Peter

Satellite A100-906 cannot boot from CD

Hi
i have Satellite A100-906 and cannot boot from CD. I don`t now whats problem.
I want recovery my pc but don't run cd boot and i tried another Windows CD and seems to be a same problem.
I get DVD Super Multi drive _usb_ but not run same problem.
Bios tool is default.
plzz gef me answer
thanx

Hi
You said you are using an USB DVD Super Multi drive??
Sorry buddy but I think you will be not able to boot from external USB CD/DVD drive
As far as I know BIOS doesnt support this!
You have to use the use the internal CD/DVD drive if you want to boot from the disk!
Greets

Cannot send fax from my mac after upgrading to yosemite

I used to be able to send a fax from my Macbook Pro by using Preview and then printing the PDF to the fax capability on my Laserjet colorMFP M475dn.
After installing OS X Yosemite:
a dialog told me that "Some of the software for the printer is missing."
When I clicked the button to install, it then said "You need to install software to use this printer... If the software isn't available in Software Update, contact the manufacturer of your printer"
Then I downloaded .dmg files for both the laserjet and officejet (I also have a photosmart I use for scanning)
I deleted the printers and tried to re-add them
When I re-add the laserjet, fax does not show up on the Printer list.
How do I get the fax driver to install on OS X Yosemite?
This question was solved.
View Solution.

My apologies for keeping you informed about reset printing system.
i have attached the screen which tells where the Use option is.
also on the screen where it displays the list of printers wait for few seconds and see if it detects the Fax. It took approx 20sec for me.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

I cannot boot from HDD nor CD/DVD drive - Satellite C

I want to recover my laptop & i need to boot from cd.
I pressed F12 first time & boot from cd but i discoverd that i have put another cd just when i restarted (correctly) i could not boot from cd neither hdd.
When i log in bios hdd was detected but not available in boot priority menu. Just network adapter was there & now i cannot boot from hdd nither cd/dvd. Bios version is 1.30
PLEASE HELP ME

> When i log in bios hdd was detected but not available in boot priority menu. Just network adapter was there & now i cannot boot from hdd nither cd/dvd.
Does this means that neither HDD nor CD/DVD drive appears in the BIOS boot option?
Strange what notebook model do you have?
Did you try to set BIOS to default?
If not do this (press F9 and save the changes in BIOS)

Cannot receive Fax from PSTN on RightFax

here is our call flow, PSTN-> GW H323 -> RightFAX -> Exchange -> outlook
- We can send fax from outlook client to an external fax without any problem.
- We can send fax from rightFax to outlook.
- We can't receive fax from external fax, when we call the fax number associate with an outlook client, we hear a busy tone.
- I think that's a problem between H323 GW and RightFAX.
- When I configure the rightFax like a gateway H323(add route Pattern), and I call a
number associate with a user on rightFax, I can hear the Fax tone.
Can you tell Me how can I solve this Issue.
My T38 Config for H323 gateway
voice service voip
allow-connections h323 to h323
supplementary-service h450.12
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
dial-peer voice 30 voip
destination-pattern 2130
session target ipv4:172.17.231.86 !@ IP of RightFax
dtmf-relay h245-alphanumeric
You'll fid enclosed the brouktrout configuration.
Need help.
Best regards
NIzar

to be honest i have no idea then.
But in your logs i see:
18 16:47:55.138: //1866/5BE70897804F/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x466E185C, Tag=0x0, Call Id=1866,
Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0)
and Cisconnect cause 47 means: Resource Unavailable, Unspecified. This cause is used to report a resource unavailable event only when no other cause will apply.
Maybe you'd better to investigate your faxserver....

Cannot Fax from Satellites to Lexmark 1270

Similar Messages

Maybe you are looking for