Cannot figure out what is going on!
I have installed Reader and Flash on my computer. I am running XP, Service Pack 3. My flash works for about an hour and then crashes. My adobe reader will not open anything and keeps on saying that I need new version of Adobe Air, when I try to install Air it says I need a new version of Air? My computer recently crashed about a month ago and I had a friend wipe the hard drive and he used the dell cd to put it back to factory settings. I cant completely uninstall all of adobe because when i go to control panel, add/remove programs it will not open. Everything else in my control panel will open except that one. Any suggestions? I did go to my computer, program files and try to delete but it didnt work.
Try the forum for Adobe Reader or Flash Player.
Similar Messages
-
Rocketdock functions like the windows task bar where it will hide until mouse over. The mouse over function seems to be the issue. Firefox somehow blocks recognition of the mouse for Rocketdock.
All other programs and previous releases work just fine with the Rocketdock.Rocketdock functions like the windows task bar where it will hide until mouse over. The mouse over function seems to be the issue. Firefox somehow blocks recognition of the mouse for Rocketdock.
All other programs and previous releases work just fine with the Rocketdock. -
Local hostname already in use - can't figure out what's going on
I've been having issues with a wireless router and I think the problem lies somewhere within my computer. As I switch back and forth from trying to connect to the internet via my router or directly connected to my cable modem, I will often get this error:
"This computer's local hostname "xyz" is already in use on this network"
There is only one compuer on the network, however and I cannot figure out what's going on.
I have 2 users set up on this machine, but I'm the admin and acting as such. Even with no other networked equipment hooked up to my Mac (except for the cable modem) this problem won't go away.
I guess my real quesiton is what causes this and where should I go to troubleshoot things?
I'm running 10.4.6, connect to my ISP using DHCP and have the same problem with both a D-Link and Linksys router.
Any ideas?
Thanks!Thanks very much for your help, fu.
If your previous setup follows a flow like this: RCA
CableModem-->NetGear Router-->AirPortExpress, there's
something misconfigured routing-wise in your network.
You have to decide which device (Netgear or AirPort
Xpress) will handle the routing in your network.
Previous to these problems, that was the basic flow of my network. The netgear router also fed a wired connection into a Wintel PC, and the AirPort Express hosted a wireless network that was extended by a second Airport Express. And that second AE connected to a ReplayTV with a wired connection. And then, of course, the PowerBook got Internet access wirelessly through the AE-hosted network. And that was it.
That network always was configured so that the netgear router assigned IP addresses using DHCP, and the Airport Expresses would not assign IP addresses (i.e., "Distribute IP addresses" was NOT checked when you look at the configuration in Airport Admin Utility).
How big is your network j? just 1 Mac (your
PowerBook)?
That was the state of the network a couple of days ago when I posted this. I have established that the PowerBook gets access to the Internet just fine directly though the cable modem, and just fine when it is the only wired connection to the router.
Let's deal with your Mac first:
Start with your Mac connected directly to the cable
Modem. (When your mac is attached directly to the
Cable Modem, do you use DHCP?)
Go to SystemPreferences-->Sharing and type a Computer
Name other than the default one
Open Applications-->Utilities-->Terminal and type
lookupd -flushcache (press Return) and reboot
the Mac.
I did this.
One way to fix your network is to have the NetGear do
the routing, and the AirPort Express to (just) extend
your (wired) network wirelessly (No routing will be
done from the AirPortXPress, (No distribution of IP
Addresses)
I soft reset both of my Airport Expresses. I configured the first one so that it was hosting a network, but not distributing IP addresses, and the second so that it was extending that wireless network. And I plugged the host AE into the netgear router. And for a little while, that was working.
But then I got a message saying "IP Configuration 192.168.0.4 in use by 00:04:40:06:1f:82, DHCP Server 192.168.0.1". The dialog box with that message will come up periodically as long as the Airport Expresses are plugged into power and one is plugged into the router. Also, I once agaiin received the message saying the local hostname (the completely original one that I had created) was in use, and the name was being changed.
Here is the thing. I cannot figure out what has that ...0.4 IP address and ...1f:82 MAC address on the network. That is not the "Internet port MAC address" or the "LAN port MAC address" for the Netgear router. It is also not the MAC address for either of the Airport Expresses or the PowerBook's internal Ethernet card.
I accessed the router through my browser, and clicked on "Attached Devices." Here is the list of Attached Devices:
# IP Address Device Name MAC Address
1 192.168.0.2 00:11:24:08:4c:88
2 192.168.0.3 00:14:51:6d:15:7c
3 192.168.0.5 00:0a:95:da:4f:24
The first two addresses are the two AE's, and the third is the internal Ethernet card of the PowerBook.
I ran "Netstat" under the Network Utility to get "Routing Table Information," and here is what I get (with some identifying info removed):
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.1 UGSc 23 10 en0
127 localhost UCS 0 0 lo0
localhost localhost UH 11 2400 lo0
169.254 link#4 UCS 0 0 en0
192.168.0 link#4 UCS 3 0 en0
192.168.0.4 link#4 UHLW 1 1 en0
192.168.0.5 localhost UHS 0 14 lo0
Internet6:
Destination Gateway Flags Netif Expire
localhost link#1 UHL lo0
localhost Uc lo0
localhost link#1 UHL lo0
link#4 UC en0
justin-and-***** 0:a:95:da:4f:24 UHL lo0
**************bedro 0:14:51:6d:15:7c UHLW en0
link#5 UC en1
justin-and-***** 0:a:95:f3:3e:df UHL lo0
**************bedro 0:14:51:6d:15:7c UHLW en1
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
ff02::%en0 link#4 UC en0
ff02::%en1 link#5 UC en1
Any ideas? Thanks again for your help. -
Once I downloaded the new IOS 5.0 I've lost all of my photos that were stored on my PC, and I no longer have access to them on the IPOD. Cannot figure out what has happened. Please help.
Thanks lllaass, but I am not computer literate and do not understand exactly what it is I am supposed to do. All of my photos were stored on Microsoft Windows Live Photo Gallery. When I now access the gallery the only thing that is there are the folders with the title of the folders. The pictures that were in those folders are now gone. I can no longer access them on my IPOD either. My photo library on my IPOD is now empty.
Thanks again for your help. -
I cannot figure out what the "other" is that is taking up space on my iPOD.
Please help! I am in the process of burning my songs to my iPOD and I noticed when I synced it up that I had alot of orange, "other" stuff taking up space. I have a few television shows and am building up my music files. I cannot figure out what the "other" is. When I clicked the tab for photos, it had 23 photos that it pulled from My Pictures. However, I played around with the settings and it said under "photos," (0). However, it still has space that it is taking up.
I have alot of music to download and I don't want to have 5.38 bytes of used up space for which I don't know what it is.
Thanks!
-JoshOther can be album artwork, contacts, notes etc. If you feel that the Other is being incorrectly reported you could try restoring your iPod. Just be aware that restoring will erase the hard drive, reload the software and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7
-
MY pages documents on my ipad wont sync to icloud. Some of the documents have had the upload icon on them for over a month. It was all working fine a month or so ago but I cant figure out why it wont work now.
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
I am not sure what is going on, but I need help ASAP!
soon as you start up the computer, keep hitting the F1 key. That should get you into the BIOS.
Also, try disabling Active System Protection for your freezing issues. I'm using XP so I don't know where to tell you to find it in Vista. -
Hi everyone. I have been trying to get information on stock and delivery with limited results. Different answers from customer service. Maybe we can help each other by posting the order date time, consumer vs business account, iphone 5s color and size and the "will ship by date". Let us know if you received the iphone 5s or if your date changed. I ordered on 9/29 at 8am, business customer, will ship by date of 10/7' iphone 5s space grey 64gb. No change in date or emails received with an update. No delivery of device I ordered a bundle with black case and charger.
Hi Everyone. I wanted to give you a quick update. As I stated in the original post, I ordered a grey iPhone 5s 64GB on 9/20 at 8am EDT (first time business customers could order). Received an email confirmation at 8:17 am confirming order and "will Ship by" of 10/7. I have heard nothing since. In fact, the online system still says expected ship date is 10/7. After talking to Vz support via DM over the weekend (post above) and then calling business support yesterday, I have come to find out that Verizon held the order until 10/9. They say the fraud department held it, but cannot explain why or why it took them two plus weeks to release it (account in good order and not a single communications via email, to the cell number or the land line of thee master account which is my desk). There was no issue ever identified. They are telling me that the order from their view was placed on 10/9 and I have to wait until 10/28 to get the device. To be clear, this is the same date for the "Will ship by" if I placed a new order today. Pretty sad. They are taking no responsibility nor are they honoring the orders in which they are placed. The customer service reps tell me they have no way to submit to get the order bumped up in priority with the warehouse or fix the issue. The reps have pointed to fraud prevention department as the problem (but they have no way to contact them), indicated that online ordering is yet another department with no contacts, etc. After talking to two reps and a manager (all very nice and well-intentioned), looks like I'm just going to get screwed and have to wait a few more weeks. It is unfortunate that "we" cannot trust orders placed online with Verizon, receive updated, clear and accurate communications or assume that Verizon will honor orders in the order placed. My only suggestion is that you have to call customer service to verify any orders and stay on them. My only hope is that somehow someone in Vz senior manager is paying attention to what is happening and attempts to fix the problems. I'm contemplating moving to another provider that apparently has stock online today. Don't want to, but losing faith quickly.
-
Syntax error in DW...cannot figure out what's wrong
Hi,
I seem to have a problem adding a new slideshow to the JQuery slider. I've taken snapshots of the code. First photo shows the #slideshow code from 1 - 7. This is the way it is when I took over the job and they work. also there is no syntax errors in DW when I open this page up:
I also wanted to show you the bottom portion of this script so you can see the code before I edited it. Here it is:
Next, I've now added #slideshow8 and so far so good - no errors:
Here is where I add the bottom portion of the code for slideshow 8 and it seems to mimic all of the ones above (7, 6, etc.). However, DW says I have an error on line 139. Here is what I added:
Keep in mind that as I type all goes well, then as I type some more, that error comes on (the line 139 error). also I did not add any code down in that section:
Also after I added the code, all of the slideshows stop working (1 through 8). So I'm really confused and hoping someone can help what the problem is. Keep in mind I just took over this job so all of this code on the page that you see was done by the person before me. Not saying I'm a great coder myself but just wanted to point this out. If you'd like to see the live page without my code, you can go to the link below.
http://www.darrp.noaa.gov/archives
Please help me. Thank you.The end of the script should look like this...
$("#slideshow8 a").each(function(){
if ($(this).is(":hidden")) {
else{
var title = $(this).attr("title");
$('#title8').html(title);
Your errored version is missing the bold above, the second set of... -
Is this a virus? I can't figure out what is going on.
I am running on 10.8.1
These windows keep showing up and I don't know what they mean. It is screwing up my keychain and I can't log into any of my apps, like mail. If I click the reset button, it resets my keychain completely. I tried that and these still show up. If I click cancel, it comes right back up. If I click it enough times, they go away for a few minutes. Any help?
http://i.imgur.com/HBcSV.jpgTown Idiot25 wrote:
There WAS a virus. Viruses on OSX do exist, they are just extremely rare.
Viruses: Are programs that earn their name by their ability to replicate themselves locally & often across a network. Many attach themselves to to other programs. When you launch one of these programs, the virus code launches as well & the virus goes about its nefarious business. Viruses are exceedingly rare on the Mac. There are no know viruses for OSX.
Trojans: Promises one thing but delivers another. You can download a program but when you run the program, the contents of your computer are instead beamed to an underground data center in Kamchatka. If you obtain software from reliable sites, you are unlikely to get a Trojan horse.
Adware: Has an embedded advertising component - one that displays or downloads ads when you run the software. Some adware is legitimate, part of the price of using a free program such as the Iconfactory's Twitterrific or Eudora for example.
Spyware: Grabs data from your computer & ofen uses it for the purposes of evil, sending personal info to a baddie or when you're using your web browser, redirecting you to site you don't want to visit.
Mac users have nothing to worry about regarding Spyware & Adware because in order for the worse forms to work, the OS must allow unrestricted access to its more sensitive parts. The Mac OS doesn't.
User Tip: Mac Viruses
Macintosh Viruses
It doesn’t get PC viruses. -
I cant figure out what is going on
so can u please help me because my ipod is being stupid.So i reset all of the settings on it and i went to go turn it on and it started to tru on and then all of a sudden it got stuck on the apple logo and soi left it there for a night to see if it would go away and it didnt so i got a little scared because this is pretty new but i dont know what happend to it because i have done this reset the whole ipod and it worked fine but this time it is now frozen!! so if you could help that would be great thank you
sincerly, Kyrahello kyra, one thing you can do is make sure you have it updated to the new version & also make sure you have the new update on iTunes. once that is done. restore the ipod. after that it should work. hope this helps.
-
Cannot figure out what my BB email address is.
New to BB and trying to configure my email. It keeps telling me I already have an account. Where do I find out my account info as I have looked all over for it. I know the phone is getting messages.
Solved!
Go to Solution.Is this a device you bought used?
Do you have a BB Data Plan?
Look at Options > Advanced > Default Services. Is there an email address or two listed there?
Then the previous user did not remove his account from the device first. You can't use his.
You will need to call the previous owner and ask them to call their carrier and ask to have the PIN of that BB removed from his account.
Then you can create your own BIS account with the carrier.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Need help figuring out what's going wrong
With the explicit help/instructions of some users here I've managed to build some sort of a tokenizer.
There are a couple of mistakes in its rules which I am aware of, and probably it could be a lot more efficient, but I've found something funny. When copying a sentence from a WSJ article:
"Book publishers were locked in 11th-hour negotiations with Apple Inc. that could rewrite the industry's revenue model after the technology giant unveils its highly anticipated tablet device Wednesday."
I got:
Book
publishers
were
locked
in
11th-hour
negotiations
with
Apple
Incorporated
that
could
rewrin
exemplificationthe
industry
is
revenue
model
after
the
technology
giant
unveils
its
highly
anticipated
tablet
devin
exemplificationWednesday
./sd
Remarkably, it rewrites the "ite" from "rewrite" to "in exemplification", just as "ice" from "device".
Any thoughs as to why this mystery occurs?
Here's the code:
public static void main(String args[])
InputStreamReader istream = new InputStreamReader(System.in) ;
BufferedReader bufRead = new BufferedReader(istream) ;
try {
System.out.println("Enter input.");
//read input
String input = bufRead.readLine();
//rewrite abbreviations
input = input.replaceAll("dr.", "doctor");
input = input.replaceAll("mr.", "mister");
input = input.replaceAll("e.g.", "exempli gratia");
input = input.replaceAll("vs.", "versus");
input = input.replaceAll("i.e.", "in exemplification");
input = input.replaceAll("Inc." , "Incorporated");
//more abbreviations to come here
//rewrite contractions
input = input.replaceAll("'ll", " will");
input = input.replaceAll("n't", " not"); // this one needs to be a bit smarter to cover cases like "won't"
input = input.replaceAll("'s", " is"); // this one needs to be a lot smarter, since now it incorrectly rewrites "John's house" to "John is house"
//perhaps rewrite some more stuff here
String[] tokens = input.split("(?=\\p{Punct}(\\s|$))|\\s+");
for(String t : tokens) {
//maybe rewrite back the stuff rewritten above?
//mark/tag sentence delimiters alreadys
if (t.equals(".") || t.equals("?") || t.equals("!") || t.equals(":") || t.equals(";")){
t = t + "/sd";
System.out.println(t);
catch (IOException err) {
System.out.println("Error reading line");
}You're passing a regular expression into the replaceAll function (not just a normal String), so the "." you use in "i.e" really means "any character".
To mean literally a dot, you have to escape it: "i\\.e".
This problem will also happen in any of the other regular expressions with dots in them. So for example, "e.g." will replace "eggs", "edge", and "ergo" with "exempli gratia" as well.
Read all about it here !
PS- You might want to try using more meaningful post titles in the future... -
I have made my entire Macbook Pro desktop larger and cannot reduce it back down to the original size. I cannot view both my dock and toolbar at the same time because of this. Suggestions?
Go to the Apple menu >System Preferences > Universal Access and turn off Zoom.
-
HELP... IPHOTO 09 Quits Unexpectedly - Cannot Figure out what is wrong
Starts up, wheel spins, then Quits Unexpectedly. How do I fix?
Crash Log:
Process: iPhoto [149]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1 (8.1)
Build Info: iPhotoProject-4150000~4
Code Type: X86 (Native)
Parent Process: launchd [119]
Interval Since Last Report: 32603 sec
Crashes Since Last Report: 4
Per-App Interval Since Last Report: 41 sec
Per-App Crashes Since Last Report: 4
Date/Time: 2009-11-01 22:55:12.263 -0500
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 8C486FCE-1A83-4B1B-9FB0-4476484E7480
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x000000000000005c
Crashed Thread: 0That
Exception Codes: KERNPROTECTIONFAILURE
is always a Data Related issue.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD
Maybe you are looking for
-
How can I keep overlay image on 8 bit image at video acqusition​?
Hi, I am using AVT camera Pike with Laview vision 2012 When I use Example code 'Grab and Attributes Setup.vi' (<NI supported Example), I simply add the event case for overlay function (such as 'IMAQ Overlay Oval') with Image by Local Variables conne
-
RFC -- XI --- SOAP synch scenaio
Hi Experts, My current scenario is RFC<> XI <-> SOAP. Rfc sending request and getting responce back from WebService, current scenario is working fine. Now i want to modify existing scenario, I want to send WebService response to RFC and Rece
-
When I print a PDF it always prints as a booklet, how can I print 1 full page?
When I print a PDF it always prints as a booklet, how do I print a full page?
-
Hi all, I need to know what is the field ObjectID in table CDHDR for the cases where OBJECTCLAS = ADRESSE. I have some kind of this number 'SD019000030905', but I can not recognize what this is.. Even using table CDPOS I am not able to know what is
-
SCCM 2012 client push to SCCM 2007 clients
Hi, I'd like to upgrade SCCM 2007 clients to SCCM 2012. Their computers appear in SCCM 2012. I could select them and then select "install client" but there are about 400 to upgrade, some or online some not. Will the process of upgrade run when the of