Cannot File share or connect to server through VPN.

I used to connect to my work server through VPN. During September through December of last year, I had no problem connecting to the server, but I could never file share. A few weeks ago I tried connecting again but I can't. The VPN connection is fine, and there's no problem with the server, but I can't connect to it. I'm pretty sure I haven't changed any of my network settings.
Any Ideas??

Just thought I would give this a bump. I recently transferred over to a new computer (I did not import/migrate settings, I reentered them. No longer can I VPN into work. Running 10.5.7 I have entered in the correct DNS settings and the domain. No errors, it says I am connected but I cannot contact any servers or file share. Any thoughts?

Similar Messages

IMac G5 cannot file share with Powerbook G4

Howdy.
Just got a refurb iMac G5 20".
I can connect to the internet (wireless) and can file share with my PowerMac G4.
My PowerMac G4 can file share with the iMac as well as my PowerBook G4.
The PowerBook G4 can file share with the PowerMac G4.
The iMac and PowerBook cannot file share with each other. I've tried everything I've known and read to do in the Network and Sharing sections on both computers. Still nothing.
I will add that I have to manually type in the Server Address for the iMac to connect to the PowerMac as well for the PowerMac to connect to the iMac.
iMac running 10.4.
PowerMac and PowerBook running 10.3.9.
Thanks for any help.

£1200 !!!
how many times over would the mbp be over the imac g5 (2.1Ghz g5, 1.5gb ram)?
i think ill wait till xmas/jan so battle it out with it for the next month or so.

My iPad just recently started a message saying"cannot get mail" the connection to server failed. It won't bring up my yahoo mail.....how do I fix??

My iPad is bringing up a message saying "cannot get mail"the connection to server failed. It won't bring up my yahoo mail but does bring up my other mail...how do I fix?

Other users have been reporting Yahoo mail problems that are not iPad problems. Might be something to try on these links.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

Cannot get mail the connection to server has failed

cannot get mail - the connection to server ha failed

Ensure you have a active interenet connection, once thats verified and the problem still exists. Go into settings>Mail,Contacts,Calender click on the account in question, delete it, then re-add it.

Cannot screen share or connect to update server.

I have a MBP and I'm having problems. My laptop connected to the wifi, i have internet and it works. Up until yesterday i could screen share with my mac mini but all of the sudden its stopped working, it also won't allow me to connect to the software update server, if i connect to my neighbours (legally) it connects to the update server but at home it wont, i have tried turning of my router but it still doesnt work. I have anothe MBP in the house that can do all of the listed functions, its just this one laptop.
Thanks,
Ben

Just thought I would give this a bump. I recently transferred over to a new computer (I did not import/migrate settings, I reentered them. No longer can I VPN into work. Running 10.5.7 I have entered in the correct DNS settings and the domain. No errors, it says I am connected but I cannot contact any servers or file share. Any thoughts?

Cannot file share between MacBook Pro and iMac, but can Screen Share fine.

Hi all,
Very strange problem going at the minute!
I can Screen Share both ways (iMac - MBP and MBP - iMac) just fine but can't seem to File Share between either computer. They are both on the same network and both have the exact same settings under SysPrefs. I can see both devices in a Finder window and can click the 'Connect As...' button, but once I've put in my credentials, the message in the Finder window changes from 'Connecting...' to 'Connection Failed' in a matter of seconds.
Both have AFP switched on and neither has the Firewall enabled. I also cannot FTP between either computer via 'Connect to Server...', but I can utilise iTunes Home Sharing perfectly.
I've tried pretty much everything I can find on the WWW, but nothing's worked! Help!
Thanks!

Hi, thanks for your help!
I think I've solved the problem now (at long last!).
Somehow, my sharing permissions on my Home folder on either computer won't allow me access. I've tried repairing permissions multiple times, but to no avail.
I've solved the problem by sharing my Macintosh HD, rather than my individual Home folder and I can access everything as normal now.

Can't connect to Server through NAT

Hey all.
So, I'm trying to connect to my 10.8 server from outside of my network using Server.app.
On my local subnet, I can connect fine with my normal user.
From anywhere outside of my local network, all I get is a shake from the login dialog (which is pretty meaningless).
Since I'm using NAT, I've forwarded 311/TCP and 311/UDP through to the server host.
When I telnet to my server on 311 I get a connection, so the traffic is getting through NAT (at least the TCP traffic).
The only indication of a problem I get is a terse log entry on the machine I've attempting to connect from:
Server: Failed to authenticate to OD
I'm using the same credentials I use through Server.app when on the local subnet, so something else is happening.
I do get a certificate warning, which I check off so that I always trust it. I can use the same hostname on my internal and external zones, but the IP resolves back to
Does OD require some additional configuration for requests from outside the local net?
Is Server.app just flawed?
Does this somehow have to do with DNS?
Any ideas?

Server app communites over TCP port 687, not 311.
That being said I wouldn't port forward server administration traffic to your server. A better approach would be to make a VPN connection first and then do whatever task you're trying to do after that.
Source: http://support.apple.com/kb/TS1629?viewlocale=en_US&locale=en_US

File upload in server through vpn

hi tapash,
i am connecting the db in us from my machine in india through vpn. actually my requirement is to upload the file into the middle tier after deploying into it.
but the page in my machine when i try to run in jdeveloper is very very slow say 1 hour. how to resolve the issue to speed up the page.
please give me solution for this. i am really getting irritated waiting for such a massive time to open up the page.

It would be much performant when the DB and the middle tier / JDev is within the same network.
You might want to use any remote desktop software (like tarantella / logmein) etc. to work on the JDev installed in the remote network system. Just one of the many options you can think of.

Cannot get mail The connection to server failed

Got my new iphone 5S and I cant get email . Says The connection to server failed. Anyone know of a fix?

Who is the provider? Do you have two-step verification turned on? Did they change something on their end?

Firefox cannot load websites when connect/disconnect from any VPN connection

I am consistently uses OpenVPN and RamsesVPN connectivity. But whenever i switch between the VPN connectivity or connect into any VPN or disconnects existing VPN connectivity. My Firefox Browser is unable to load new webpages/Refresh existing open TABS.
In order to restore, i have to restart my Browser each time, whereas i am not facing this problem with Chrome.
I am running with Windows 7 Enterprise edition, and latest Firefox version.
Is there any method to avoid these restarts ?

Hi, this bug is old, but it has useful info for VPNs
See for reference Bug 702111
And there are built in features on the about:config file that you can tweak the number of connections and allowing pipe lining: [http://support.vpnsecure.me/articles/ssh-tunnelling-proxy-troubleshooting/tweaking-firefox-for-best-performance-security Third party information on these connections]
Other suggestions I have seen are to add bookmarks while logged into either vpn. (For example, bookmark the frequent sites you use in either vpn in separate folders)
In Firebug, when you connect or refresh the page when moving from one VPN to the other, do you see a termination in the connection to the first vpn?

Cannot connect to Serv through my computer's Oracle SQL Developer client.

Connection issue:
When I try to connect to the server , I receive the following message:
“An error was encountered performing the requested operation:
IO Error: The Network Adapter could not establish the connection
Vender code 17002”
The odd thing is that I am able to connect through the Citrix SQL Developer using the same settings. My internet connection is working fine, and I am not connected to a VPN.
Please assist me.
Thanks,
Vas

905508 wrote:
Connection issue:
When I try to connect to the server , I receive the following message:
“An error was encountered performing the requested operation:
IO Error: The Network Adapter could not establish the connection
Vender code 17002”
OS/Networking mis-configuration!
Oracle is the victim; not the culprit.
Root cause & fix are external to Oracle.
Is any type of OS Virtualization involved here?

File upload and download in server through web Dynpro

Hai all,
         i want to store one document in SQL Server 2000 through Webdyn pro. I inserted
one document through java into SQL Server 2000 using the following method which name is
insertFile(...).
void insertFile(FileDBTransfer fdb, Connection cn, String FileName)throws IOException, FileNotFoundException, SQLException
          int FileLength;
          FileInputStream fis;
          PreparedStatement pstmt;
          int last=FileName.lastIndexOf("/");
          String docname=FileName.substring(last+1,FileName.length());
          fis = fdb.getFileInputStream(FileName);
          FileLength= fdb.getFileLength(FileName);
          pstmt = cn.prepareStatement("insert into ReportArchive values(?,?)");
          pstmt.setString(1,docname);
          pstmt.setBinaryStream(2, fis, FileLength); //method to insert a stream of bytes
          pstmt.executeUpdate();
     }// end insertZipFile
     Here i have given file name like "c:\test\test.pdf" it's work fine.
     My J2EE server is running different machine and my Netweaver is another machine.
If both server and IDE in same machine it's work fine. But both are in different machine,
i have some problems.
     If i try like this server always go and check his own path, not client machine
so it will error like "given source not found". So if i get client machine's path
then i will store easily into SQL Server 2000.
     Whenever i run, it should check the client machine path instead of server path.
Thanks in advance,
K.Saravanan.

Hi Saravan,
Data
Determines the data drain, that is, the location of the data, of the file to be uploaded in the context. The system can only read this data value.
fileName
Gives exact filename
Refer IWDFileUpload also
http://help.sap.com/saphelp_nw04/helpdata/en/5a/90ff4cd0c8cd48a69b836e5e550880/content.htm
                      Regards
                        Kisgor Gopinathan
Message was edited by: Kishor Gopinathan
Message was edited by: Kishor Gopinathan

Cannot file share with PC Win 7 after Lion install

Prior to Lion install in my brand new MacBook Pro, I cannot share files with my PC running Win 7. I am connecting wirelessly and had no issues sharing files priior to the install. If anyone can help, please send me the steps to get my file sharing working.

How about telling us more about your network?

Connect SQL Server through DBCO - DBCONNECT

Hi Guys,
I am trying to connect to one of the SQL Server in my Domain. I have made entries as mentioned by SAP note in DBCO Transaction. When I am testing connection through program 'ADBC_TEST_CONNECTION' it is showing me following error:
Testing a Database Connection Defined in DBCON
Could not open connection SQLCONNECTION
sql error 1- occured:
I have already installed DBMSSSLIB.DLL in executable directory also.
Please advice.
Thanks,
Usman Malik

Hi,
As mentioned I have put these files i.e. DBMSSSLIB.DLL and DBMSSSLIB.PDB (64bit) in the following directories and restarted the server:
X:\usr\sap\SID\D*\exe
X:\usr\sap\SID\sys\exe\run
X:\usr\sap\SID\sys\exe\ (i386 or ntamd64) \ (nuc or uc)
tried again but still it is showing the same error when i execute ADBC_TEST_CONNECTION program in SE38:
Testing a Database Connection Defined in DBCON
Could not open connection ABC
sql error 1- occured:
SQL Server is Standard Edition and OS is Windows 2008 R2 64bit. Our SAP Server is also Windows 2008 64bit.
Please advice what to do now because I have done entries in DBCO Transaction correctly as mentioned by the note 178949 i.e.
CON_NAME: <my_conn_name>
DBMS: MSS
USER_NAME: <db_user>
PASSWORD: <password>
CON_ENV: MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>
I am using SQL Server Administrator Username/Password to connect to this Server.
Thanks,
Usman Malik

Time Machine backups of File Shares on OS X Server

I'm running OS X Server on Mavericks 10.9.4. The server itself has 3 drives, the Boot drive, a file-sharing-only drive "Server", and a TimeMachine backup which backs up both drives. Generally it works fine.
However, I've noticed that if a file sharing client edits a file on the Server drive, it seems as if TimeMachine (on the server, not on the client) doesn't "see" the changes and thus won't back up that file.
I have not determined the pattern : some files created or edited by clients ARE backed up by TimeMachine normally. But sometimes the changes are missed.
Anyone else seeing this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Cannot File share or connect to server through VPN.

Similar Messages

Maybe you are looking for