Cannot find a mounting to install a second hard drive in my Qosmio x70-A

I have looked all over the internet and have gotten no where in my search for a mounting for the secondary hard drive bay in my laptop.  Anybody know where I can get one?  
Also I've included pictures of the secondary drive bay and the primary bay.  From the looks of it I can't use the same type of mounting in the secondary bay as in the primary.
Attachments:
20140714_220231.jpg ‏1868 KB
20140714_220242.jpg ‏2068 KB

I have the same issue, and have found Toshiba support to be completely unacceptable on this.
After getting bumped around from sales to tech to sales because "we don't answer that question, you have to talk to the other guy", I finally got a "straight" answer from sales:
"Sir, we DO NOT sell that part, and therefore I CANNOT tell you a part or model number for the part you may need to install that second hard drive. The only thing you can do is talk to our parts supplier over at National Parts (1 800 524 8338) and ask them to provide you with the model numer or sell you the part."
At this point, I was annoyed, but thought that at least with a straight answer I could proceed.
After a very short hold time with National Parts, a very kind associate answered the phone and listened to my tale of woe. Unfortunately, she was unable to help and said:
"Unfortunately, sir, I have listed that while there is no caddy for the second hard drive slot on you X70-A specific model, there is supposed to be a mounting bracket. Unfortunately, we have been trying for MONTHS to have Toshiba give us the part number, spec, or any other information other than 'mounting bracket', and therefore I'm afraid we have neither a part to sell you nor a part number for you to go looking for one".
At this point annoyance is full-blown anger. How is it possible for Toshiba to make something that should be SO SIMPLE so VERY VERY VERY complicated and impossible.
"Sorry, if you didn't want to spring for the dual drives when you bought it, you're hosed forever sucker." Does not seem like an excellent customer service strategy.
This was the FIRST Toshiba I'd ever decided to spend my hard-earned money on, and now it's a machine I can't upgrade because they can't get their act together with their parts supplier or in-house over a 3 dollar bracket?
UNACCEPTABLE.
The pictures the original poster shows are exactly what I have, no need to add more o fthe same.
ANY help, Toshiba?

Similar Messages

  • Installing a second hard drive in my HDX16 - Manual says yes, but I don't see a slot

    Hello, 
    My HDX16-1200 manual says I can support a second hard drive, however I opened up the computer and do not see a spot to mount the drive. 
    Does anyone know where the second disk gets installed?
    Thanks.

    I've been finding some great instructions on how to install a second hard drive in my PowerMac G5, but been unable to find some instructions on steps after that that assist my low tech-intelligence quotient. I'm planning on getting a Western Digital 750GB Caviar SE16.
    Basically my questions are:
    1) Once I've installed a second SATA internal hard drive, do I have to wipe the entire contents of my first hard drive and reformat the Mac completely? Or can I just format that second hard drive and have it work seamlessly with my current configuration?
    2) I understand I can partition a second hard into more than one volume. I'd like to be able to use the second internal drive, but also have the increased reliability of RAID. Can I create a RAID array on that drive as well? How might I do this without screwing up?

  • Is it possible to model mac-mini M815 install a second hard drive?

    Hi all!
    Tell me whether, you can install a second hard drive, such as SSD or plain and you need to do?
    My model mac-mini M815 with 500GB hard drive.

    Standard Hard Drive:
    500 GB (5400 RPM)
    Int. HD Interface:
    Serial ATA (6 Gb/s) x2
    Details:
    This model also can be equipped with a 750 GB, 7200 RPM hard drive for an additional US$150. A second hard drive or SSD also can be installed, although it is not formally supported. Also see: How do you upgrade the hard drive(s) in the Aluminum "Unibody" Mac mini models? What type of hard drive(s) do they support?
    From Everymac.com.
    For the Mac Mini MC815LL of 2011.
    If this is not your model have a look here to find it and confirm what can be done.

  • What do I need to install a second hard drive in my Pavilion dv7-6b77dx​?

    I have a HP Pavilion dv7-6b77dx Entertainment laptop and want to install a second hard drive in the second empty bay.  I have a 32o Gb drive but I need the cable to hook it up.  Where can I find the proper cable?

    Hi, you can order the hard drive upgrade kit here:
    http://h20141.www2.hp.com/Hpparts/Search_Results.a​spx?mscssid=92A6CF5069A84DB8994705680353B526&Searc​...
    The service guide for your PC is here  http://h10032.www1.hp.com/ctg/Manual/c03043778.pdf
    -Bryan
    I am an HP employee

  • Can I install a SECOND HARD DRIVE (ssd) on my x220i

    For some reason I'm having problems finding the answer to this.  I would like to install an ssd, but I would like to keep the existing hard drive for space.  Is the a way to install a second hard drive (an ssd) into the x220i?
    Thanks for any input!

    You can install an SSD drive in the mSATA card slot.
    See this: http://forums.storagereview.com/index.php/topic/29​946-msata-ssd-update-my-thinkpad-x220i/

  • Installing a second hard drive in a G10-133

    Couple of questions for you...
    I'd like to install a second hard drive in my G10-133. Specifically I'm looking at a second 80gig drive (MK8026GAX). Does anyone have experience of installing a second drive like this?
    Secondly, I know where to buy the drive from. But, does anyone have any advice about the drive carriage itself (ie. the bit of kit which holds the drive in place in the bay)? Specifically, where can I get one?
    Cheers everyone.

    Hi Andrew,
    Ignore Markus, you dont have to install the same size HDD in order for it to work. Your Qosmio shipped with an 80GB, you can put a 100GB if you like or a 20GB doesnt matter, aslong as you, as Markus correctly states you set the jumper correctly.
    For the HDD to be fitted, you need the mounting brackets, try someone like Hugh Symons or CBC Computers, Google it for details.

  • Installing a second hard drive in g5

    hi. i just bought a 400 GB hitachi desk star hard drive to install as a second drive in my G5. i slid it in the alloted slot and plugged in the corresponding cables. when i powered up my computer i went to disk utilities and it showed no new drives. anybody know what i'm doing wrong?
    also, i couldn't find and screw holes or anything to secure the drive in the slot that's there for it. any way to keep the drive from wiggling all around in there?

    I've been finding some great instructions on how to install a second hard drive in my PowerMac G5, but been unable to find some instructions on steps after that that assist my low tech-intelligence quotient. I'm planning on getting a Western Digital 750GB Caviar SE16.
    Basically my questions are:
    1) Once I've installed a second SATA internal hard drive, do I have to wipe the entire contents of my first hard drive and reformat the Mac completely? Or can I just format that second hard drive and have it work seamlessly with my current configuration?
    2) I understand I can partition a second hard into more than one volume. I'd like to be able to use the second internal drive, but also have the increased reliability of RAID. Can I create a RAID array on that drive as well? How might I do this without screwing up?

  • I want to install a second hard drive

    I want to install a second hard drive in my mid 2011 Imac. Is there room for expansion? Do I have to buy any special equipment or is it possible to plug the new hard drive directly in to the computer?

    You are welcome.
    WD, Seagate, LaCie and others have a good variety of Thunderbolt external drives and storage solutions.
    Thunderbolt external hard drives - Google Search

  • Can you install a second hard drive on a Touchsmart320-1130 PC?

    This question was solved.
    View Solution.

    Here are the specs for your HP TouchSmart 320-1130a Desktop Computer. No, you can't install a second hard drive in this computer. The HP TouchSmart and All-in-One computers have more in common with laptops than they do with desktops.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Installing a second hard drive in a G4 - advice needed please

    Hi......
    I have a G4 Quicksilver (2002) model and I also have a G4 Digital Audio model as well which is currently surplus to requirements.....
    I would like to take out the 20Gb hard drive from the older G4 and put it into the Quicksilver as a second internal hard drive (for extra storage capacity....)
    I have seen the instructions regarding installing a second hard drive and it doesn't seem to complicated....
    I just want to check because the 20Gb hard drive has the operating system on it for the older G4.....
    Do I have to fire up the machine and erase the hard drive and then take it out and put it into the Quicksilver...?
    Or am I able to simply take it out, put it in the Quicksilver and erase it when I restart the machine....?
    I don't have the original installation discs for the OSX...
    I talked to a Mac technician at work and he said I can just take out the 20Gb hard drive and put it in as a 'slave' drive and I have to 'bend some pins' (I think he said) when I install it.........and I can then erase the second hard drive and use it as storage.....
    any advice would be greatly appreciated.....
    Thanks

    Hi, craigkelleigh -
    Ony many drives the label showing jumper pins configurations will be on the end of the drive, just above the block of pins; on other drives it may be on the top, rarely on the bottom.
    The block of jumper pins is at the same end of the drive where the data cable (wide, flat ribbon cable) and the power connector plug in.
    It is best to move the jumpers before installing the hard drive - they're quite small and hard to manipulate in a confined space. Important - do not move jumper pins if the drive is powered up (running).
    As far as removing and installing the drive, you can view/download a how-to PDF or movieclip from these pages -
    G4 (Digital Audio) - http://docs.info.apple.com/article.html?artnum=75313
    G4 Quicksilver - http://docs.info.apple.com/article.html?artnum=75314
    In addition, with regard to specific jumper positions, that depends on the make (and sometimes the model) of the drive. There are some resources available on-line, such as jumper diagrams for specific drives. If you would give us the specific make (manufacturer) and model number of your hard drive (that info should be shown on labels affixed to the drive), we may be able to direct you to a specific website page with that info.

  • Installing a second hard drive

    I am new to Apple computers and just got a Mac Pro. I want to install a second hard drive to run Windows on. I put the new hard drive in, now what? Boot camp won't let me select this new drive, it says it has to be installed on the current booted drive. What do I do? Thanks.

    The simplest thing to do if
    you want to use an entire drive for Windows/Boot Camp
    is to format the drive yourself using Disk Utility.
    You will need to repartition the drive using the
    Master Boot Record partition scheme (Partition tab >
    Options…) and format it as a MS-DOS partition. Once
    you do that, hold the option key down during the boot
    phase and you'll be given the option to start from
    the Windows CD. Do do and you should have your second
    drive as your C: drive. Then, format it NTFS and
    follow the usual Windows installation.
    Do I still have to run boot camp once I install Windows on this drive?

  • Pavilon 500-319na can I install a second hard drive

    pavilon 500-319na second hard drive
    Options 
    ‎01-02-2015 09:30 AM
    Operating System: Windows 8.1
    I bought an HP Pavilion 500 - 319na desktop in summer and want to install a 2nd hard drive. There are spare connections on the board and the power cable to the internal hard drive has a spare connection. From what I read it needs to be SATA 3. I have read conflicting advice on this board.  Some say yes, some say no.
    OK, there seems to be only one bay (a poor oversight by HP) but provided I find a way of securing another drive is there any reason why it should not work.
    From what I read it should be max 2Tb's.
    I want a definitive answer please!
    Win 8.1 64 bit.
    This is the hard drive I plan to buy.  The spec says XP, Vista, Win 7, but am I right in thinking it should work with win 8.1 
    http://www.pcworld.co.uk/gbuk/components-upgrades/internal-hard-drives/3-5-inch-hard-drives/toshiba-...
    This question was solved.
    View Solution.

    As I said to you in the other cross posting (desktop hardware):
    You can obtain 3.5" hard drive cage from here for $11 shipped.  Granted it has a 120mm fan and space for 4 drives, but for the price, you can mod/cut all you want.
    Now your other issue/question:  You will want a SataIII 6GB/sec drive 2TB, 7200 RPM.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Install a second hard drive

    I have just removed the hard drive from my older PC. It is a Western Digital, WD2000. I want to install it as a second hard drive in my HP Pavilion p6516f Desktop PC. How do I go about it?

    Hi,
    Based on the followinf specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c02153182
    Your machine has 2 free HDD bays and few SATA ports (at the right bottom corner of the motherboard). Please use the following tutorials:
       http://www.wikihow.com/Add-an-Extra-Hard-Drive
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help installing a second hard drive in HP ENVY 700-230qe CTO Desktop

    I am trying to install a Western Digital 1.5 TB (model # WD15EARSSP) internal hard drive to my HP ENVY 700-230qe CTO Desktop PC. Would you please provide me the instruction menu and procedure for the second HD installation? What kind cable and other supplies do I need to connect the new HD to my PC? SATA cables: Straight–Straight, Straight–left angle, Straight-right angle… etc.
    This question was solved.
    View Solution.

    Bling888, welcome to the forum.
    Here is a guide that should help you.  Be certain to watch the video.  You will need SATA III cables; power and data.  Although, the SATA 1.0 cables will work fine if you don't have the others.  I have found that the straight cables have always worked for me.
    Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Installing a second hard drive in a HP ENVY 15

    I have just bought an HP ENVY 15t-j100. I opted to have an SSD instead of the 1TB drive. I was told that the original drive could be installed as a secondary drive but foolishly decided not to do that. Believe it or not I was concerned about the added weight! Hey, I'd just lost a Viao Z550, it weighed in at 3.2 pounds, and that included an optical drive! I had never actually seen an HP Envy, ordered it from overseas just going on the spec. Now that I have it I can see that worrying about the extra weight of the drive is like being concerned with the extra weight of a GPS unit in a Chevy Suburban. The power brick alone weighs about as much as the Z550!
    So now I would like to add a secondary drive. I came across a tutorial for doing this in an Envy 17, would the 15 be much the same? Thanks for any enlightenment.
    This question was solved.
    View Solution.

    No the problem is not with the hardware...mSSDs are very fast and reliable. The problem is the design. The mSSD slot is supposed to be and is designed to be used only for a hard drive acceleration cache...usually 24 or 32 gigs. It allows the speed of an SSD to leverage the performance of the main regular hard drive. It is close to rocket science. It is technically possible to work around the way HP has set it up with limits in the BIOS and such but it is not really designed for that mSSD slot to be used to hold a storage sized drive to be used as an ordinary mounted volume or the main boot drive. Again, possible, but it takes a degree in computer engineering to accomplish. 

Maybe you are looking for