Cannot find a working Wireless Driver for my T41

I've searched within Lenovo's support page and tried all the drivers listed, but none work for me. There's always a Network Controller without a driver on the Device Manager list of Windows.
My laptop is a T41 2373-7JS. I'm currently using Windows XP SP3.
Any help that you can provide will be greatly appreciated! Thanks!
Pharod

Welcome to the forum, pharod!
Here's your wireless driver:
 http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-42683
Follow the instructions on the linked page on how to extract it after the download, and you should be fine.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • Cannot find the Realtek Wireless Driver for download

    Dear Users
    I had to do a Toshiba recovery and now can't access the net because i don't have the wireless driver.
    Can anyone help as i don't seem to be able to find the driver online ?
    Hope you can help

    Here you can find all WLan drivers provided by Toshiba:
    http://aps2.toshiba-tro.de/wlan/
    There you can find also the Realtek WLan driver

  • My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi.  What's up with this?

    My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi.  What's up with this?  Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can.  I tried redownloading the software, but in the setup I get a "device not reachable" message:  "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..."  I've checked my network on the system preferences and it's properly connected.  I'm on the net as I do this.  Tis very frustrating, and any assistance woud be appreciated.

    Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
    I think they're using ethernet.
    To connect a Printer via Ethernet, no password is needed.
    We already tried the password for the internet and that did not work...
    If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
    What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

  • Sierra Wireless driver for native support for 10.5 displays wrong network

    Anyone getting the wrong wireless network with the Sierra Wireless driver for native support in Leopard? Sometimes when my AT&T 881u cannot connect, the mini card starts displaying Verizon information. This only happens once every couple of weeks. AT&T says its Sierra Wireless' problem and Sierra says the issue is Apple's.
    I took a picture of the issue with my iPhone. I'll post a link as soon as I get a chance to sync.
    This card normally works great, but this issue is really strange since AT&T G3 network shouldn't be compatible with Verizon's EVDO.

    That model is included in the hpijs and ESP ghostscript driver set:
    http://www.linuxprinting.org/macosx/hpijs/
    When you get that installed, come back with print server model for setup help. Since there isn't auto setup software for OS X, we need to setup all the details.

  • X41 wireless driver for windows 7

    where can i find a wireless driver for windows 7 on my x41 tablet pc?
    The only thing i found on Lenovo's website is for vista, xp, and windows 2000
    any help would be greatful!
    Thank you!!!
    Solved!
    Go to Solution.

    Give the Vista driver a shot. Some drivers work vice versa.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • Wireless driver for hp 15r-006 tu

    Hi
    I need wireless driver for windows 7 ultimate 64-bit. My laptop model no is hp 15r-006 tu.
    Thanks in advance.
    Nandan
    This question was solved.
    View Solution.

    Hi
    Try-
    Bluetooth:
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&sp​...
    Wi-Fi:
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&sp​...
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.

  • I cant find a fonctional Wacom Driver for my x61 SXGA Tablet!

    Hi volks
    i cant find a fonctional Wacom Driver for my x61 SXGA Tablet!
    I installed once the new Bamboo Driver (5.08) from the Wacom Homepage.
    But the Driver didn't wokk, i was written that none supported device could be find.
    So I installed the old Bamboo Driver (5.07) on it, and I had some Problems. I couldnt calibrate my monitor, there was only the arrow when i moved my pen and when i turned the desktop 270°, there was a problem with using the pen: When I went with the pen down, the arrow went up. One positive thing was only that the pressure ability was working fine in photoshop.
    You know maybe which driver i should try?
    http://www.wacom.com/productsupport/model.cfm btw. i cant find this sticker on the Back of my tablet.
    greez

     Since this thread is on the subject of the stylus..........
    I've noticed that when turning the LCD (flipping it over for tablet position) on some units the stylus will stop working. I'm seeing this alot. I've replaced LCD cables, made sure theres enough slack so its not pulled when turning the LCD 180 deg., etc.
         I can't see any types of sensors that would signal the driver or BIOS when the display is flipped into tablet position - but am I missing something. Does the software know when the display in in tablet mode - if so, maybe this problem is indeed driver or BIOS related.
       Does anyone know what could be the cause....and /or the answer here?
                       Thanks........DCO

  • Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).

    Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).  The existing driver wants me to connect the printer using USB.  The printer is in another facility I am trying to support.

    Hi,
    The HP M1212nf used the Host-Based printing language, such printing language is not recommended Citrix or Terminal Services envoirnment and not officially supported.. you may try using the Citrix UPD on the server by installing the basic driver for yor printer on the client:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3965849&task=&
    (ii) HP does not recommend installing these host-based LaserJet drivers on the Citrix server; however, the devices may function by using the Citrix UPD on the Citrix server with the HP host-based driver installed on the client. Print drivers for your product may be available within the Windows 7 operating system.
    http://support.citrix.com/servlet/KbServlet/download/10498-102-693211/Citrix%20Supported%20HP%20Prin...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Where can I find a Mac printer driver for the HP LaserJet 1536

    Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

    Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
    Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
    I work on behalf of HP

  • Need Wireless driver for Satellite L505-10h

    Can someone help me whit finding Wireless driver for L505-10h, And tell me how to install it.
    And how to find my wireless adapter via my notebook?
    Thanks.

    Hi mate
    The notebook seems to support Realtek Wlan card RTL8191SE.
    You can find the drivers here:
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    In order to install this you have firstly download the driver package, then unzip the package.
    In the driver package the exe file should be available. Execute this exe file and the installation should proceeds.
    Good luck

  • Wireless driver for HP15

    I'm trying to find the Win 7 64bit wireless driver for the HP 15-r029wm. It doesn't seem to be listed in the driver list. Is it bundled with another driver. 
    Thanks in advance!
    This question was solved.
    View Solution.

    Dynamite! Thank you..

  • Wireless driver for pavilion 14-n033tx

    Hi,
       I am in need of wireless driver for my pavilion 14-n033tx.I have installed windows 8 pro 64x but there isnt any driver for that.So would you please be kind enough to provide me some link for that.
    Thank you.

    Get your full Model number or Product number from the Service Tag attached to bottom of laptop (may be under battery)
    How Do I Find My Model Number or Product Number
     Once you have the info, use the button at top of this page titled "Support", then click "Download drivers" from the menu. Enter your Product Number. After entering PN click 'Go". On the next page use the dropdown menu to select  Windows 8 64bit, click Next. A list will populate with drivers/software.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • JSPDynPage : Cannot find the tag library descriptor for tagLib

    Hi,
    I'm working JSPDynPage and i have error in IDE at design time.
    i just created one JSPDynPage component. and an error is shown at the uri="tagLib"
    <%@ taglib uri="tagLib" prefix="hbj" %>
    The problem is that the word 'tagLib' is marked and has the hoovering text "Cannot find the tag library descriptor for tagLib". Why is this? Do I have to do add some dc dependency ? Or is there another cause for this problem?
    I am working with CE 7.2 .
    portalapp.xml
    <?xml version="1.0" encoding="utf-8"?>
    <application>
      <application-config>
        <property name="SharingReference" value="com.sap.portal.htmlb"/>
      </application-config>
      <components>
        <component name="GCPPURLJSP">
          <component-config>
            <property name="ClassName" value="com.cts.gc.GCPPURLJSP"/>
            <property name="SecurityZone" value="com.cts.gc/low_safety"/>
          </component-config>
          <component-profile>
            <property name="tagLib" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld"/>
          </component-profile>
        </component>
      </components>
      <services/>
    </application>
    Best regards
    Pavan

    Hi Pavan,
    For using htmlb, you can use another tag library. Use the below code in your jsp
    <%@ taglib uri = "prt:taglib:tlhtmlb" prefix="hbj" %>
    And in portalapp.xml, replace the <property> of <component-profile> with the below line.
    <property name="tlhtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld">
    Also, you may need to add the import statement for htmlb, if not done earlier -
    <%@ page import = "com.sapportals.htmlb.*" %>

  • I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    Itunes 11.1 is for your computer, not your iphone
    It is required in order to sync with ios 7.

Maybe you are looking for

  • Updated to 10.7.2 and sound is no longer working.

    Running a 2010 11 inch Macbook Air. I updated to 10.7.2 and now the sound doesn't work. Annoying! Anyone experiencing the same issue or know how to fix it?

  • Logical XOR operator in T-SQL (SQL Server 2000)

    Hi all.... I was wondering why SQL Server 2000 lacks a logical XOR operator. Do you have a ready to use function that implements it? How can I program one by myself? I know that A XOR B is equivalent to NOT A * B + A * NOT B. So I tried to create thi

  • Is this is a substitute for idisk/icloud and more?

    Hi I run lion/iOS5 on two macs, two iphones and an ipad.  I use iCloud and iTunes match also.  I have no server experience. iDisk is leaving us soon and there are two major issues I want to sort out and I am wondering if Lion Server may be the answer

  • How do I add and remove mp3s from my iPhone?

    I've forgotten again how to add and remove mp3s from my iPhone.  Can someone please remind me?  I am an iTunes subscriber using a PC running Windows 7 and iTunes 11.1.

  • Is it possible to have multiple page layout in single document?

    HI all, I am having a pdf document which contains 10 pages. I want to make the first three pages in Landscape layout and the remaining 7 pages in Portrait, is it possible? Thanks in advance Sreejesh K V