Cannot find anything on "JniAgComAdaptor.write" failed

Will someone please tell me how to fix this problem? I'm running Fedora Core 4. The system hangs continually after I try to open a program I've written in the object navigator:
ERROR ##########################
ERROR: JniAgComAdaptor.write failed
ERROR ##########################
ERROR ##########################
ERROR: GuiNiWriter: write failed
ERROR ##########################
This happens after I connect to SAP and attempt to access the Object Navigator, or it might happen when I try to write or run a program. I've googled and can find no leads on this error whatsoever.
Any help would be GREATLY appreciated.
thanks-
Kevin

I don't know why the difference. I just asked what's 10 times 10 and the answer was from Wolfram Alpha. When I asked for information on Wolfram Alpha , I got the I have no information on Wolfram Alpha answer. Maybe the question needs to be phrased different . Try use wolfram alpha to tell me the distance to the sun.

Similar Messages

I updated to 7.0.1 and my search function cannot find anything now

I updated to 7.0.1 and my search function cannot find anything now

Searching the email. When i type in the keywords, it looks like it's searching, but the results are always the same - nothing found. I've used this function many times daily, I have an enormous amount of emails saved. Thanks...

Cannot find anything with ff 4 unlike ff 3.6

recently downloaded ff 4 and cannot find anything on the web. It takes me to obscure or irrelevant sites and not what i am looking for unlike the previous version of ff which simply gave me a list of possible websites. How is this(ff4) an improvement on the previous version?

Craig Roberts1-
The only drive thing I see is that you have no logical disk3. I don't know if that matters or not. But there are four drives listed and the G5 holds 3.
What is the extra drive and which one is it? Is there an external drive of some sort?
Luck-
-DaddyPaycheck

HT4060 My iPad needs recharging. I plug in the charge cable in what I think is the recharging slot. I cannot find anything in any of the literature on the website that identifies the charging slot but the plug seems to fit! But it won't charge.

My iPad needs recharging. I plug in the charge cable in what I think is the recharging slot. I cannot find anything in any of the literature or on the website that identifies the charging slot but the plug seems to fit! But it won't charge.

Ther does seem to be quite a lot of comments about this issue
It seems the charger is a little slow and takes upto 4 hours to charge
closing all apps and leave the ipod in standby seems to off the best charging experience
I hope the Photo helps
In my view apple should have included a better charger for the price, the new 12w adaptor will reduce the charge time and resolve you problem, however its about $15
http://store.apple.com/uk/product/MD836B/A/apple-12w-usb-power-adapter?fnode=3c# overview

Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any sug

Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any suggestions?

Justin,
In addition to what mo said, some have found that the page with the direct download link,
http://support.apple.com/kb/DL1572
may turn up blank to start with, so it may be necessary to reload the page.

HT1420 I cannot find anything in a store menu in iTunes to say 'Authorise my computer'.

I cannot find anything in a store menu in iTunes to say 'Authorise my computer'.

In iTunes, go to the Store menu item on the menu bar, and choose Authorize This Computer, as shown below.
If by any chance you don't see the menu bar ("File, Edit, View, Controls, Store, Help"), first enable it by using CTRL+B.

JniAgComAdaptor.write failed GuiNiWriter: write failed

Hi,
I also have the system completely hang (the hourglass never stops) when certain functions (e.g. activating a program that has good syntax) are attempted. Here is the output:
27.10. 11:54:28.105 ERROR: JniAgComAdaptor.write failed
ERROR #########################
271.10. 11:54:28.126 ERROR: GuiNiWriter: write failed
Does anyone know how to fix this? Any help would be greatly appreciated!
thanks,
Kevin

Hello I have the same problem above here but, I can log in with no problems with the password.
"############################# ERROR #############################
21.09. 15:08:23.053 ERROR: JniAgComAdaptor.write failed
ERROR #############################
ERROR #############################
21.09. 15:08:23.054 ERROR: GuiNiWriter: write failed
ERROR #############################
After I kill the process, I can restart and get beyond this point, provided I type and click very carefully."
Any help will be appreicated.
I have SLES 10
IBMJava2-142 (as recomended) 32-bit
SAP Netweaver 2004s Trial Version for Linux
Edited by: Carlos Gonzalez on Jan 18, 2011 8:51 PM

PlatinGUI: JniAgComAdaptor.write failed, GuiNiWriter: write failed

Hello,
When I use PlatinGUI on my SUSE 10.2 system I have the following two problems:
#1: After any rapid mouse movement or quick press of the return key which would cause the change to a new screen or open a new subwindow, the hourglass doesn't stop running and the system hangs. On the konsole from which I started guilogon I get the following message:
ERROR #############################
21.09. 15:08:23.053 ERROR: JniAgComAdaptor.write failed
ERROR #############################
ERROR #############################
21.09. 15:08:23.054 ERROR: GuiNiWriter: write failed
ERROR #############################
After I kill the process, I can restart and get beyond this point, provided I type and click very carefully.
#2: Since the last few days, probably after a linux system update, I can't enter any information into the password field (no keyboard echo or forward movement of the cursor), unless I choose "new password". Only then the password input box becomes accessible to the keyboard again. All other input boxes in the login window are not affected by this behaviour. After I then log into the system sometimes also the box where I would enter the transactions is blocked the same way.
My system:
Suse Linux 10.2
Java 1.5.0.
SAP testsuite NW4 for linux
PlatinGUI ver. 5
MaxDB 7.6
(Maybe something went wrong during the MaxDB upgrade process, because initially I installed the srv and ind-rpms. After deinstalling them, I upgraded using the maxdb-all.tgz).
Best regards,
Harald

Dear Harald, Dear Bobby,
I'd suggest to use the SDN [SAP GUI|SAP GUI; forum, which also covers the JavaGUI issues.
Thanks,
Hannes

2007 Macbook Pro suddenly coding over files, pictures, deleting itunes and iphoto albums, after it had been dropped in late november 2010. Apple specialists say they cannot find anything wrong. HELP!

I have a Macbook Pro, the last generation, not the most recent one. It fell about 2 feet in late November 2010 and had the screen and logicboard replaced right after. A day or two after that, I started to notice that my word documents, pictures files, pdf files, itunes library and iphoto library were coded over and deleted out of nowhere. When I click on it, it says it is not a compatible format or cannot be read, etc. However, this doesn't happen all the time and not with every file. I could open a new word document and begin it today, and tomorrow it will not be retreavable, but I have a document on my desktop that has been there since January and can still be opened, so this happens without warning.
I have taken it in to the Genius Bar at my local Apple store several times with this problem, and they say they cannot see anything wrong with my computer. On my most recent visit, the lady told me to buy an external hardrive, transfer everything onto it, then do a complete clean out of my computer and reboot it I guess. If it doesn't continue, then that might have been the problem, but if it does continue, then it is obviously not that. I am really confused and I don't know if I should trust that this is the problem or just go ahead and buy a new computer all together. I don't have applecare anymore.
Help me!!! I am desperate.

Does your MBP still have its original hard drive? If so, it may have started to go south. The average useful life of a notebook drive is 3-5 years, and if yours is the original, it would be about 4 years old. The drop could also have affected it.
It might be worth booting from your install disc and repairing your boot disk. It sounds like you could have some directory issues. Repair until there is nothing left to repair. If Disk Utility cannot repair the drive, you will need a stronger utility like Disk Warrior or possibly a new drive.
It also sounds like you may have some software corruption, which can happen if you have hard drive problems. Have you tried reinstalling the OS? You would want to make a backup first on an external drive and then use the archive and install feature and then update the OS.
You might want to download and run SMART Utility:
http://www.volitans-software.com/smart_utility.php
You can download the demo and run it several times for free. SMART Utility seems to be somewhat more critical than Disk Utility, and may be able to detect impending drive failure sooner.
If the drive checks out OK, then you can follow the advice you got from the genius and make a clone of your boot drive using Super Duper or carbon Copy Cloner on the external drive. You could boot from the clone you made and see how your Mac does when booted from a different drive. If all is good, you can reformat the internal drive and clone back to it.
If all you need is a replacement hard drive, then your Mac is likely worth fixing. I too have a 2007 MBP, and I replaced my hard drive right after Applecare expired, as the drive started to fail a week after Applecare ran out. I put in a Western Digital 500 GB 7200 RPM Scorpio Black, and have been running on it ever since. I have also upped my RAM to 6 GB and my OS to Lion. Not all the features of Lion work on a 2007 MBP--the trackpad does not support Gestures, and AirDrop is not supported. Even so, I expect this Mac to last me a few more years.
iFixit has instructions for replacing the hard drive, and OWC has both good RAM and kits for hard drive replacements. My gut feeling is that your hard drive is behind the weird symptoms you are experiencing.
If you are ready for a new computer, by all means get one--there are some great choices. However, you should be able to fix your old Mac for not very much money and get some more use out of it.
Good luck!

Cannot find bean in html:write gag

hi everybody
i am new to struts
in my application i am getting the following error
Cannot find bean error in any scope
in my code
in jsp i have given
logic:messagesPresent>
<UL>
<html:messages id="error" message="false">
<LI><bean:write name="error"/></LI>
</html:messages>
</UL>
</logic:messagesPresent>
and in my validate method in action form
i have given
ActionErrors errors = new ActionErrors();
errors.add(text parameter,ActionError parameter)
while creating ActionError Object i am passing one key that is refering the message in property file
any body can help me to resolve this problem
thanks in advance

Good Morning here!
Thank you all for the fabulous responses!
First of all, let me mention an important Fact. I am using The Struts Layout Library to build dependent Combo Boxes. so My enclosing html tag is <html:layout>
I am not sure If this has an influence on how Struts verifies the existence of Session Beans/Variables.
As I mentioned before: Action Class1 puts some variables in session and forwards to the JSP page in Question, those values load well the first time, and get printed in the JSP.
The JSP page has an Action Class2, triggered by a submit button, Action Class2 forwards to the same JSP page, But when this Action Class2 is called the values that were put in Session using Action Class1 get Lost.
tolmank, your reply is Very Interesting, because my server is internally changing my IP address to somename:8080. Are you sure this is what definitely could be causing the problem?
Thanks to all of you guys!
God Bless.
Post your comments... and let me know what you think.

Cannot find bean in html:write

hi everybody
i am new to struts
in my application i am getting the following error
Cannot find bean error in any scope
in my code
in jsp i have given
logic:messagesPresent>
<UL>
<html:messages id="error" message="false">
<LI><bean:write name="error"/></LI>
</html:messages>
</UL>
</logic:messagesPresent>
and in my validate method in action form
i have given
ActionErrors errors = new ActionErrors();
errors.add(text parameter,ActionError parameter)
while creating ActionError Object i am passing one key that is refering the message in property file
any body can help me to resolve this problem
thanks in advance

Good Morning here!
Thank you all for the fabulous responses!
First of all, let me mention an important Fact. I am using The Struts Layout Library to build dependent Combo Boxes. so My enclosing html tag is <html:layout>
I am not sure If this has an influence on how Struts verifies the existence of Session Beans/Variables.
As I mentioned before: Action Class1 puts some variables in session and forwards to the JSP page in Question, those values load well the first time, and get printed in the JSP.
The JSP page has an Action Class2, triggered by a submit button, Action Class2 forwards to the same JSP page, But when this Action Class2 is called the values that were put in Session using Action Class1 get Lost.
tolmank, your reply is Very Interesting, because my server is internally changing my IP address to somename:8080. Are you sure this is what definitely could be causing the problem?
Thanks to all of you guys!
God Bless.
Post your comments... and let me know what you think.

Hi, my name is Molly and my iPod has a backlight but it won't turn on, it's a fourth generation if that helps. I have looked in settings for anything about the backlight but there is nothing please help as I cannot find anything

Hi, my name is Molly and my iPod has a backlight but it won't turn on, it's a fourth generation if that helps. I have looked in settings for anything about the backlight but there is nothing please help as I cannot find anything

Go to Settings>Brightness and make sure it is maxed out.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT201304 I keep getting a message in safari to disable private browsing in my setting but I cannot find anything I safari settings that is about private browsing help

Help I keep getting a message in safari that it cannot open the page unless I turn off private browsing
This can be done in settings
I had never set up private browsing
Going to setting I cannot see anything that let's me shut off private browsing
Can somebody help .

Hello Cantadd,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Safari web settings
http://support.apple.com/kb/HT1677
To visit sites without making history, turn Private on or off in Safari.
To turn on private browsing, tap Safari, then tap in the lower-right corner. Tap Private to turn private browsing on.
Note: If you're using an iPad, tap , then Private.
or private again to turn it off.
Have a nice day,
Mario

Can someone please tell me how to extend a piece of music I have created in garageband, I cannot find anything in the help topics and i am new to the system.

Can someone please tell me how to extend a piece of music that I have created in garageband. I am new to the system and cannot find any info in the help topics. The music is currently only 1 minute and I need it to be 1.39sec to fit in with the film it will be used with in iMovie. Thanks.

Yes, it helps.
You are using a version of the newest GarageBand 10.0, and not GarageBand '11 as in your original post. And I was sending you screenshots from GarageBand '11, LOL!
In GarageBand 10.0 is the end-of-song marker hiding behind the zoom controls. Zoom out as far as possible by shifting the zoom scrollbar to the left. Then you should be able to see a corner of the end-of-song marker peeping out behind the zoom control. Try to grab it with the mouse pointer and shift it to the time you want.

MacBook won't boot after trying to repair with Disk Utility. Cannot boot in Safe Mode. Just powers down after about 5 minutes. Apple Hardware Test says error 4SNS/1/40000001:IG0C-0.265 But I cannot find anything on the net about it. MacBook 4,1 Intel.

Hello Everyone,
I am in dire need of assistance I am hoping someone could provide. I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Any suggestions are welcome and appreciated.
Thank you for your time.

You've a couple of issues .... when Disk Utility tells you it can't repair a drive, if the error is a soft error, like an invalid tree or node, Disk Warrior (or TechTool Pro) can handle it. However, if Disk Warrior (or TechTool Pro) can't handle it, you can erase and write zero's to the hard drive and restore to it, or you can buy a new hard drive. Sometimes running SMART Utility can provide additional insight into the health of the hard drive.
THe 4SNS error is a sensor error. You could install iStat Pro to see if something is indeed getting too hot or remaining room temp or less. You may need to take it into an Apple shop so they can use their thermal diagnostics to test and isolate it further.

Cannot find anything on "JniAgComAdaptor.write" failed

Similar Messages

Maybe you are looking for