Cannot find BI master system

Hi everyone,
we are developing bex queries in our BI (NW2004s) system. However, when we create an iview in our Enterprise portal containing such queries we always get the following error when trying to run them.
"The initial exception that caused the request to fail, was:
Cannot find BI master system"
We have our BW system configured into EP under System Administration section.
Every connection test is successfull.
On the other hand, if we run the queries from BW ABAP system using  the Java Preview they run ok.
So there seems to be something missing in our EP system...
Has anyone faced this before ?
any help would be appreciated.
Thanks in advance.
Ernest.

Hi Elliot
You can edit this setting under the following path:
System Administration -> System Configuration ->
here you browse to find your BW system , double click it and there you'll be able to change the propery value at the right hand side of the screen.. (7th item)
Let me know if this worked for you also.
Regards.

Similar Messages

  • Curve Sync to Outlook - Cannot find table in system file

    I have just upgraded from a Pearl to a Curve, loaded the desktop software and tried to sync to my MS Outlook, but it gives an error message "Cannot find table in system file".
    I found a thread which pointed to a solution (ID KB15278), but this did not work.  The final step in that solution is to uninstall and reinstall the desktop software, and when I try to do that via Control Panel, it won't remove the software.  I seem to have both Version 4.2 and 4.7 of the software on my PC.
    Anyone got any suggestions?
    Solved!
    Go to Solution.

    the following article from the public knowledge base will certainly be helpful.
    http://www.blackberry.com/btsc/KB02206
    Perform a clean uninstall of BlackBerry Desktop Software
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • I have HugesNet Gen4 and have downloaded most current version.  I am unable to open and cannot find where in system preferences and/or Safari I give permission.  Can a techie tell me where?

    Because I downloaded from internet, I am unable to open.  I cannot find where I give permission and/or if I need to download some plug in or something.  Please help and thanks.

    Hello Charlene,
    It sounds like you are getting a message that the application you downloaded can't be opened because it's from an unidentified developer. 
    Gatekeeper is a feature of Mac OS X that by default blocks software from unknown developers, but you can change the functionality to download and install software from developers you trust:
    Gatekeeper gives you more control over what you install. You can choose the safest option and only allow apps that come from the Mac App Store to open. There is also the option of only allowing apps that come from the Mac App Store and identified developers. Or you can choose to allow any apps to open, just like previous versions of OS X.
    Gatekeeper options are found in Apple menu > System Preferences… > Security & Privacy > General tab under the header "Allow applications downloaded from:"
    If you trust the source you are downloading the application from, you can switch the option to "Anywhere" to download the file.  Once you finish downloading the file, you can always switch back to one of the other options.
    OS X: About Gatekeeper
    http://support.apple.com/kb/ht5290
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Cannot find BT master socket to test broadband

    House is less than 18months old and had all phone sockets installed prior to moving in as first occupants. BT line connected after 2weeks. Engineer did not enter house. Now have problem with broadband and have been told I need to connect the router to the BT master socket for test purposes but cannot find one! All internal sockets are standard phone sockets.
    BT line comes up from ground outside on front wall near door in a BT 'Openreach' box which is a flip-down, secured by a screw. On opening this the BTincoming  connection is sealed, then there is a plug, which if removed disconnects the internal lines. Then there is a connector to which the blue/white/orange leads coming out from through wall from inside the house (white covered cable) are connected. The other side of this wall is underneath the built-in kitchen units and has no master socket anywhere.
    Have been banging my head trying to explain to ISP that I cannot connect to a master socket as cant find one. Should I have one or is the outside box all I get? If so, how do I connect the computer to the (6 pin) socket outside?

    New build properties are now being fitted with a new Network Terminating Equipment box, the XNTE, instead of the previous NTE5 master socket. This is fitted outside the property and BT responsibility ends at the XNTE. This is the box you referred to with the flip-down cover. It contains all the master socket components. The socket in the XNTE is a BT test point and requires a special plug - it is for BT use only.
    In order to eliminate your internal wiring you would need to connect a standard slave socket at the XNTE in place of the white covered cable. Make a note of the way the existing cable is connected. The official connections are pin 2 - Blue, 3 - Brown, 4 - green, 5 - Orange.
    See http://www.openreach.co.uk/orpg/networkinfo/developnetwork/downloads/Builders_Guide_3_1.pdf
    Peter

  • I literary cannot find Library/Preferences/System Configuration? HELP!!

    Hello all!
    I have searched through the community and seen many people have had the same problem i get the Alert:No internet connection exclamation mark and cannot access the internet. It happened to me once and the apple support people helped me solve it and i called again but apparently you have to have the apple support thing and its too damm expensive! anyways I remember the guy that helped me said to delete certain things.
    I was looking through the internet to find what those things are and now i know, but the problem is now that i cant find that folder everyone speaks of, i know what to delete but i dont know how to get there. I literary have no idea how to get to library then preferences and then the system configuration. I have seen that you go to MAC HD or go to the apple, or system preferences but i just cant find is on my mac!
    Can someone PLEASE help me.
    Please and thanks
    amarani

    You have to Show all files to see ALL the folders and files on your drive. By Default OS X hides some of them.
    Use this teminal command to show all folder and files.
    defaults write com.apple.Finder AppleShowAllFiles YES
    When you are done if you want to hide the normally hidden folder and files use the same command but change the YES to NO (All Caps)
    You might have to type in your user password when executing this command and when you type in your passwprd it will not show on screen in terminal. So don't think it's not working. And you may have to hit the Enter/Return key after typing in your password. I don't remember.

  • Cannot find official hardware system requirements for a pc running app-v client on W7

    looking for
    hardware system requirements for a pc running app-v client on W7
    Thx.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    Hello,
    Did you attempt to google for "app-v 5 system requirements"?
    http://technet.microsoft.com/en-us/library/jj713426.aspx
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • DM 4.5, software issues message "Cannot find system in table file"

    Serious error in Desktop Manager Software V 4.5Windows XP SP3MS OutlookDesktop Manager Software V 4.5, accompanies new RIM Blackberry Curve package purchased retail Bell MobilityJune 2009
    After installation DM 4.5, software issues message “Cannot find system in table file”This happens during “Intellisynch” [Outlook <> Curve] set up. Tried 4 times to make this work – no luck [I am experienced DM user – 4 BBerrys over 8 years]Called Bell Tech support 3 calls total time 2 hours !!Ended up trying to do command prompt and registry setting changes over the phoneDespite 3 long calls this did NOT solve the problem
    Went to Blackberry web site -- their remedy is disgraceful - they expect untrained PC users to do clean removes of DM 4.5 with Windows Registry edits by hand. Highly risky – dangerous – and likely will not work
    REMEDYUse MS Add/Remove programs to remove DM 4.5 or 4.7Download old version - DM 4.2 Release 2 from BBerry web suiteLoad DM 4.2DM 4.2 works fine – copied 1000 contacts and 1000 calendar entries from Outlook correctly to my new CurveDoug SeabornToronto Canada416 819 3684   

    Hi and welcome to the forums!
    These procedures do work, and are not very hard.
    A lot of users have dealt successfully with it.
    Here is the Knowledgebase article:
    Let us know if you need some help or explanations.
    OK?
    Thanks,
    Bifocals
     http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=1&docTy...
    The following error message appears at the end of the synchronization process in BlackBerry® Desktop Manager:
    Cannot find table in system file
    CauseA BlackBerry Desktop Software upgrade failed to remove the Connectors folder from C:\Program Files\Research In Motion\BlackBerry\Connectors. As a result, older Microsoft Outlook applications were registered with BlackBerry Desktop Software.
    Resolution
    To resolve this issue, complete the following steps:
    Verify that the Connectors folder is present in the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
    If the Connectors folder is present, complete the tasks listed below.
    Task 1 - Remove the existing Microsoft Outlook connector ilxolkCompanion.fil
    Open a command prompt.
    Navigate to the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
    Type regsvr32 -u ilxolkCompanion.fil. Note: Microsoft Outlook will no longer be listed as an available application in BlackBerry Desktop Manager.
    Task 2 - Register the most current Microsoft Outlook connector
    Open a command prompt.
    Navigate to the following location: C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector
    Type regsvr32 msoutlookconnector.fil. Note: Microsoft Outlook will now be registered as an available application in BlackBerry Desktop Manager.
    Note: After these tasks are complete, remove and re-install the BlackBerry Desktop Software. For instructions, see KB02206.
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Cannot find system in table file

    I got the 8900 series and I upgraded the desktop software to v4.7
    I am trying to synchronize with outlook, but when I am configuring it when I click finish it appear this run time error 'cannot find system in table file'
    I uninstalled and installed again the desktop software and there was no change.
    I tried removing something of connectors and it didn't help.
    Can someone please help me with this.
    Thanks.

    Hi and Welcome to the Forums!
    Here is a KB that discusses that error:
    KB15278 Receiving error "cannot find table in system file" when attempting to configure BlackBerry Desktop Manager synchronization
    Hopefully it contains something useful!
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    hi,
    am running the below command for moving sql serevr mdf and ldf files  from one  drive to another : c  drive to d drive:
    but am getting the below error
    SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
    use master
    DECLARE @DBName nvarchar(50)
    SET @DBName = 'CMP_143'
    DECLARE @RC int
    EXEC @RC = sp_detach_db @DBName
    DECLARE @NewPath nvarchar(1000)
    --SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
    SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
    DECLARE @OldPath nvarchar(1000)
    SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
    DECLARE @DBFileName nvarchar(100)
    SET @DBFileName = @DBName + '.mdf';
    DECLARE @LogFileName nvarchar(100)
    SET @LogFileName = @DBName + '_log.ldf';
    DECLARE @SRCData nvarchar(1000)
    SET @SRCData = @OldPath + @DBFileName;
    DECLARE @SRCLog nvarchar(1000)
    SET @SRCLog = @OldPath + @LogFileName;
    DECLARE @DESTData nvarchar(1000)
    SET @DESTData = @NewPath + @DBFileName;
    DECLARE @DESTLog nvarchar(1000)
    SET @DESTLog = @NewPath + @LogFileName;
    DECLARE @FILEPATH nvarchar(1000);
    DECLARE @LOGPATH nvarchar(1000);
    SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
    SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
    exec xp_cmdshell @FILEPATH;
    exec xp_cmdshell @LOGPATH;
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    go
    can anyone pls help how to set the db offline. currently  i  stopped the sql server services from services.msc and started the  sql server agent.
    should i stop both services for moving from one drive to another?
    note: I tried teh below solution but this didint work:
    ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
    Update:
    now am getting the message :
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    (3 row(s) affected)
    (3 row(s) affected)
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    First you should have checked the database mdf/ldf name and location by using the command
    Use CMP_143
    Go
    Sp_helpfile
    Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
    Database is already detached that’s why db offline failed
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    Attached step is failing as there is no mdf file
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
    Solution:
    Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

  • MDT2012 - Deployment failed, the system cannot find the file specified

    Hi everybody. 
    First, excuse me for my english, i think it's not the best thing I'm able to do, but now, I REALLY need help. 
    I encounter issues with my MDT 2012 Update 1 platform. 
    I have 5 systems to capture. All systems have 3 partitions (System, softwares, data). Capture is working fine for all parts. 
    In my Task Sequence, to deploy these images (C, D and E parts), I use a script after the "Install Operating System" which runs imagex to deploy the WIM images for D: and E:. 
    The script is the following : 
    "%DeployRoot%\Tools\x64\imagex" /apply "%DeployRoot%\Operating Systems\D_Drive\D_Drive.wim" 1 %DDrive%"
    But, for some images, the task fails on the "D" drive deployement. The wizard shows the following error : 
    Litetouch deployment dailed, return code = -214767259 0x80004005
    Failed to run the action: InstallD (ie : the script above)
    The system cannot find the file specified. (Error: 00000002; Source: Windows)
    The error is on my task which uses imagex to deploy my D and E WIM.
    So I looked to see if the file's path was the good one. 
    And it is !!!
    Wizard says that the file couldn't be find, but the file is existing, and in the good path. 
    For your information, there is no problem when I don't use multicast. Everything is working fine on unicast, not on multicast. 
    I even encounter this issue if I use my MDT server and my computers on the same switch. 
    Any help would be gratefull, my client gives me the week to resolve the issue. 
    Thanks 

    BDD.LOG
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Will boot into Windows PE architecture x64 to match OS being deployed.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Open Control File: OperatingSystems]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[------  Applying Windows image using ImageX.exe ------]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41023 sent: LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property SourcePath is now = \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1348)]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Started.
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Complete [0x0].]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer of "\\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim" to "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" completed successfully.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Cleaning off old operating system]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Skipping V:\Drivers]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"    \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Enabling 8dot3 name support on volume V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\imagex.exe"  /apply "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" 1 V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread=""
    file="LTIApply">
    <![LOG[Command has been started (process ID 536)]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   1% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   2% ] Applying progress ]LOG]!><time="17:00:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   3% ] Applying progress ]LOG]!><time="17:00:58.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   4% ] Applying progress: 5:28 mins remaining ]LOG]!><time="17:01:03.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   5% ] Applying progress: 5:33 mins remaining ]LOG]!><time="17:01:07.000+000"
    <![LOG[  Console > [  99% ] Applying progress: 3 secs remaining ]LOG]!><time="17:06:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [ 100% ] Applying progress ]LOG]!><time="17:06:50.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Successfully applied image.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Total elapsed time: 6 min 7 sec]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property LTIDirtyOS is now = TRUE]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 5625 sent: The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\bootsect.exe"  /nt60 V:]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1252)]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Target volumes will be updated with BOOTMGR compatible bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > V: (\\?\Volume{2ab15dec-99c9-19e3-baf6-94de80bab573})
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console >     Successfully updated NTFS filesystem bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Bootcode was successfully updated on all targeted volumes.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Find the boot drive (if any) [True] [6.1.7601.18229] [False]]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"    \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDisk : \\MININT-1H9O4H6\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found bootable drive (No Boot File Test) [ V: ]: \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Ready to Prepare boot partition: V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: cscript.exe //nologo "\\192.168.36.208\MDT$\Scripts\ztiRunCommandHidden.wsf" ""\\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe" V:\windows /l fr-fr  /s V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread=""
    file="ztiRunCommandHidden">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[About to run command: \\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe V:\windows /l fr-fr  /s V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has been started (process ID 1984)]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[  Console > Boot files successfully created.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has returned: 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Run Command: X:\WINDOWS\SYSTEM32\bcdedit.exe /Store "V:\boot\bcd" /timeout 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCD> The operation completed successfully.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Created scratch folder.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copy File: C:\MININT\unattend.xml to V:\Windows\Panther\Unattend.xml]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copied unattend.xml to V:\Windows\Panther for image apply.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: dism.exe /Image:V:\ /Apply-Unattend:V:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1516)]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Deployment Image Servicing and Management tool]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Image Version: 6.1.7600.16385]LOG]!><time="17:06:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > The operation completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command completed, return code = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
    <![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property RetVal is now = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Already connected to server 192.168.36.208]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LiteTouch.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LiteTouch.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTIApply.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTIApply.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTICopyScripts.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTICopyScripts.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\PnpEnum.xml to \\192.168.36.208\Logs$\MININT-1H9O4H6\PnpEnum.xml]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\Wizard.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\Wizard.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIBDE.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIBDE.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIConfigure.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIConfigure.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDiskpart.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDiskpart.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDrivers.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDrivers.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIGather.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIGather.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTINextPhase.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTINextPhase.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIPatches.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIPatches.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ztiRunCommandHidden.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ztiRunCommandHidden.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIValidate.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIValidate.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG to \\192.168.36.208\Logs$\MININT-1H9O4H6\SMSTS.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\Debug\Netsetup.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\System32\wpeinit.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying log C:\MININT\SMSOSD\OSDLOGS\BDD.log contents to \\192.168.36.208\Logs$\MININT-1H9O4H6\BDD.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

  • Flash CS6 AIR error: CreateWinProcess failed with error 2. The system cannot find the file specified

    I created an AIR application in Adobe Flash CS6, but when I test, debug or publish it, an error always occured.
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    When I clicked OK, Flash suddenly stops responding, so I need to end the process using Task Manager.
    I created a blank FLA document and tested and published it, everything's fine there. It was exported properly. But when I do it with the AIR app, Flash can't even start exporting the SWF of the AIP app, and instead gave me the error.
    I speculate that there is something wrong with the Java command line stuff Flash is doing behind the curtain. I tried using ADL myself and get the AIR app working fine.
    I also found out that Flash has its own JRE installed, so I don't have to bother the JRE used by my computer.
    Is there any way to fix this? Thanks in advance. Have a nice day!

    I installed  the update, but I'm sorry to say that it did not solve the problem
    The error is still there as described by Master §ix and Daniel777
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
    In this case, I can't use the simulator to test the applications,
    thanks

  • Flash CS 6 error: CreateWinProcess failed with error 2 - The system cannot find the file specified

    Hi,
    I'm getting the error "CreateWinProcess failed with error 2 - The system cannot find the file specified" whenever I try to test an Air app within the Flash IDE.
    This error even comes up with a new and empty project .fla file. I already updated the Air runtime and Flash to the latest version.
    How to fix this problem? Any ideas welcome!
    Thank you.

    I installed  the update, but I'm sorry to say that it did not solve the problem
    The error is still there as described by Master §ix and Daniel777
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
    In this case, I can't use the simulator to test the applications,
    thanks

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Error message on my development workstation: The system cannot find the file specified.

    Post Author: cseverin
    CA Forum: Crystal Reports
    Hi,
    I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database.  I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue.  The problem seems to be with Crystal Reports. 
    I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it.  I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them.  All worked fine. 
    To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report.  After doing this, the preview no longer worked.
    Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it.  In the code behind the page I wrote:
    Option Strict On
    Imports System.Data
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Partial Class Reports
         Inherits System.Web.UI.Page
         Private objOpenFilesreport As OpenFilesReport
         Private rptOpenFiles As ReportDocument
         Private strLastErrorMessage As String = Nothing
         Private errLastException As Exception = Nothing
         Dim strFileKey As String
         Dim strJurisdictionCode As String
         Dim strStaffId As String
         Dim strReportId As String
         Private Sub ConfigureCrystalReports()
              Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
              Dim rptopenfiles As New ReportDocument
              rptOpenFiles.Load(reportPath)  <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
              Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
              ConnectionInfo.DatabaseName = my database
              ConnectionInfo.UserID = login id of user
              ConnectionInfo.Password = user's password
              SetDBLogonForReport(ConnectionInfo, rptopenfiles)
              CrystalReportViewer1.ReportSource = rptopenfiles
         End Sub
         Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
             ConfigureCrystalReports()
         End Sub
         Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
              Dim myTables As Tables = myReportDocument.Database.Tables
              For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                   Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                   myTableLogonInfo.ConnectionInfo = ConnectionInfo
                   myTable.ApplyLogOnInfo(myTableLogonInfo)
              Next
         End Sub
    End Class
    I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it.  When I run the website in Visual Studio and click on the hyperlink I get the following:
    Server Error in '/MyTest' Application.
    The system cannot find the file specified.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
    &#91;COMException (0x80004005): The system cannot find the file specified.
    &#93;
       CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
    &#91;Exception: Load report failed.&#93;
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
       CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
       CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
       CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
       CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
       CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
       System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
    Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832 
    Any ideas, anyone?
    Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file.  I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries.  But how do I call these functions at the time the report is run?
    This is my first Crystal report written in .NET and I've been struggling with it for days now.  Any help would be most appreciated!
    Thanks very much!
    Chris Severin

    hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

  • Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

    I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
    Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
    The event viewer has the following information...
    3008
    A configuration error has occurred.
    5/1/2014 10:41:08 PM
    5/2/2014 5:41:08 AM
    7539d8a38c8b47869eda3f1749aba08d
    1
    1
    0
    /LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
    Full
    /Microsoft-Server-ActiveSync
    C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
    SERVER
    16284
    w3wp.exe
    NT AUTHORITY\SYSTEM
    ConfigurationErrorsException
    Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
    /Microsoft-Server-ActiveSync/default.eas
    174.224.130.31
    False
    NT AUTHORITY\SYSTEM
    24
    NT AUTHORITY\SYSTEM
    False
    at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
    I have tried most, if not all, of the different post's suggestions to no avail.
    The steps I have taken are as follows...
    1. Repaired .Net 4 (Both the client and extended)
    2. Uninstalled and reinstalled .Net Framework 4.0.
    3. Verified that the dll exists.
    4. Checked the applicationHost.config file. It contains the follow statement...
    <add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
    />
    5. Changed the following line in web.config to include the runtimeVersion...
    <add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
    6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
    7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
    I still receive the same error message.
    Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
    Any help would be very appreciated!

    Hi,
    Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
    1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
    2. If it doesn’t work, explore the Default Web site.
    3. Renamed the web.config file to web.config.old
    4. Reset IIS using iisreset command to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

Maybe you are looking for

  • Best way to modify Sequential Process Model for report generation.

    I am using the Sequential Process Model in my application and the TestStand Reference Manual, (Figure A-1), clearly shows the following processing sequence: ...<part removed>     Call the Test Sequence     Display the UUT results     Generate a Repor

  • Not so random shutdowns...

    Hi, My Macbook is just over a year old now still under applecare, I had random shutdowns before and did the firmware update which fixed it. Yesterday, I had the +please hold down the power button...+ message and so did thinking little of it, after al

  • Firefox 35.0.1/windows doesn't display all yahoo web mail controls, IE works fine.

    To expand the message list to cover the advertise area when preview pane is below the message list, click on the expand control symbol to the right of the scroll bar. This shows in IE. This does not show in firefox.

  • Fiscal Variant, Holidays for Time Stream IDs

    While choosing the periodicities for a planning area, I have to choose a storage bucket profile and the fiscal variant. Can any one tell where and how actually to create the fiscal variant(or for that matter, fiscal calendar) by myself. Also, please

  • Xerox 7400 weird behavior when printing from Illustrator/Acrobat CS3

    Hi, Since I have Leopard, every time I try to print anything from Illustrator on the 7400N and doing more than one copy, it looks like the printer takes every copy as a separate print job (but in the print queue looks like one). This is what it's goi