Cannot find CAF Developer Role

Hi ,
When i try to access the Test Tools - Service Browser in CAF Runtime Config . -
I get the error --
Access forbidden. You should have the CAFDeveloper role. Please log on again.
We did not have this problem when we were on
SP 9 . Now we are on SP 12.
I have added all the roles that are present for CAF including all the Admin roles.
Yet i do not finrd any role - CAF Developer.
I searched the forum - there was a solution saying to make a dummy role -i tried that but it did not work.There was a mention of SAP Note but the number was not given.
Does anyone have the idea as to how to resolve this problem and which SAP note referes to this problem.
Thanks

Hi Uma,
sure please see below:
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.administration     GP Administrator
     pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.forms.roles.reading     GP Form Reader
     pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.dt.basic     GP Basic User
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.forms.roles.updating GP Form Modifier
CAFUIAdmin
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.securityadmin GP Security Administrator
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.sap_system_user GP SAP System User
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.runtime GP User
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.forms.roles.execution GP Form Executor
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.dt.expert GP Expert User
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.superuser GP Superuser Portalrolle
Administrator Administrator role
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.runtime_run_only GP Run-Only User
     pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.runtime_wc     GP Runtime WC
     pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.dt.advanced     GP Advanced User
CAFAdmin
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.designtime GP Business Expert
pcd:portal_content/com.sap.gm.cnt/core/VCRole
VCRole
CAFDeveloper

Similar Messages

Cannot find Fiori Backend Role

Dear expert,
I'm implementing Fiori wave 2 Leave Request Approval and Purchase Order Approval for customer.
The customer is using ERP EHP6, thus we installed GBAPP002 and GBHCM003 on the backend.
Both the components are at the latest patch.
However cannot find the pre-defined backend role in PFCG:
SAP_GBHCM_LEAVE_APPROVAL_MGR and
SAP_MM_PO_APV_APP
Is there any important step that I miss? Masayuki Sekihara
Thank you very much!
Chloe
Tags edited by: Michael Appleby

Hi Chloe.
Please check the latest support level package.
You might be on an older one.
regards,
Meghna

CAF developer role

Hi,
I could not find CAFDEVELOPER role, when i check for this in user admin -
available roles.
can i know what is the prob and how to get this role
awaiting for ur reply.
Raju
Edited by: V R K Raju P on Apr 22, 2009 8:57 PM

You need to configure them, for getting the CAFDEVELOPER role check the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/00/225342d8a7be30e10000000a155106/frameset.htm
IF you are looking for CAF GP
then check the below link for all the CAF portal roles available
http://help.sap.com/saphelp_nw04s/helpdata/en/4a/7eff418d7d5f24e10000000a1550b0/frameset.htm
Raghu

Cannot find "Create A Role " in BI Publisher

Hi All,
I am trying to configure EBS security and assign catalog permissions to the EBS Roles.Following the Oracle Document Integrating with Other Oracle Security Models - 11g Release 1 (11.1.1)
and it says under Security Center-->Role & Permissions click "Create A Role" but I can't find Create A Role button or option. I am using OBIEE 11.1.1.7.0
Any help or thoughts if i am missing anything.
Thanks
SYK

As Per the Oracle Support Documentation
1. Login in to xmlpserver as weblogic user
2. Navigate to Administration > Security Center > Security Configuration
3. On the bottom of the page navigate to the Security Model section
4. On the drop down list select "BI Publisher Security" and provide a password for the security
5. Log out of xmlpserver and login as weblogic user on Weblogic Console and restart the BI Server
6. Once restarted then login back to xmlpserver with the username as administrator and provide the password you had provided on step 4.
7. Now navigate to Administration > Security Center, and a new link called "users" is available and on the Roles and Permissions link, "Create Role" button can be found.
N.B this solution is applicable to only Standalone BI Publisher
It is not recommended to change the Security Model to 'BI Publisher Security' when using BI Publisher within OBIEE installation.
For OBIEE installation the Security Model should be 'Fusion Middleware' security or 'BI Server Security'.
It Worked for me ..Just posting it if anyone run into same issue:)

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Cannot find role xi_jpr_register_bindings

I get into the Identity management of NWA, I cannot find any xi_* or XI_* roles.
Please help understand why? Version is PI7.00 SPS 09. Points guaranteed. Thanks!

Hi Jennefer,
If you are looking for XI_* roles, if exsists as roles in your backend system then you have to find this in groups in the nwa
identity management.Because the roles in backend system are represented as groups in java stack.
Reward points if helpfull.
Regards,
Vamshi.

Cannot find role SAP_SDCCN_ALL in satellite system

Hi,
I cannot find the role SAP_SDCCN_ALL in satellite system. The sattelite system is R3 4.7 PI 2003_1_470, PI_Basis 2003_1_620. Did anyone of you encounter the same problem?.
Regards
Anil

Hi Anil,
the role SAP_SDCCN_ALL is shipped with ST-PI 2005_1_*.
In this ST-PI release the new transaction SDCCN is shipped first time. This transaction replaces the old SDCC. So it is quite clear that in the ST-PI 2003__ the role is not available.
So please upgrade your ST-PI and you will get the new SDCCN.
This SDCCN has the following new features and functions. You can send data to more then one Solution Manager.
If you have installed the new ST-PI and you are generating then RFCs (the SM_*_BACK), the tool automatically assigns this destination to the SDCCN, so then automatically the SDCCN would ask the new SolMan for new sessions.
Also one big advantage of the new SDCCN is, if one download is required by more then one service, this download will not be collected multiple times (reduces system load), it is collected only ones. By default a new download will be collected after 3 or 6 days, this is customizing of the SDCCN.
So I recommend to upgrade your ST-PI
Regards,
uDo

Develop query_find encountering 'FRM-41052: cannot find window: invalid ID

hi，dear all.
I 'm using forms 6i to develop query_find function.
I have Written the query_find trigger on the datablock as follows:
app_find.query_find('W_MAIN', --'Window name of Data Block'
'W_QF', --'Window Name of Query Find Block'
'B_QF'); --'Query Find Block Name'
but when I click the torch , the query_find window come out after three times of showing of the error message 'FRM-41052: cannot find window: invalid ID'. So every time I have to click three times 'OK' to close the annoying message.
Can anybody give me some guides how to realise query_find?? how to avoid this error message??
thanks in advance!

set_window_property('MAIN_WINDOW', TITLE, 'PACKAGE DETAILS');
Make sure that you have a window named 'MAIN_WINDOW';
YES, I do have.
form_setup_pkg.event('WHEN-NEW-FORM-INSTANCE');
IF :PARAMETER.P_PACKING_ID is NOT NULL THEN
EXECUTE_QUERY;
END IF;
Which is the code of this package?
PACKAGE BODY FORM_SETUP_PKG IS
PROCEDURE EVENT ( i_event IN VARCHAR2 )
IS
BEGIN
     Modify this package body to add events during form startup
     and to modify the window name and window title
     IF i_event = 'PRE-FORM' THEN
SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW,WINDOW_STATE,MAXIMIZE);
SET_WINDOW_PROPERTY('BLOCKNAME',WINDOW_STATE,MAXIMIZE);
SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, TITLE, 'GEMS');
set_window_property('BLOCKNAME', TITLE, 'Template Form');
     ELSIF i_event = 'WHEN-NEW-FORM-INSTANCE' THEN
          null;
     ELSE
          null;
     END IF;
END EVENT;
END;
SELECT ORDER_NUMBER,CLIENT,QUANTITY,PACKING_ID,LETTER_ORDER_CODE,
ACTUAL_CARRIER,LETTER_ORDER_NUMBER,ACTUAL_SHIPMENT_TYPE,WEIGHT,PACKAGE_NUMBER FROM PACKING WHERE CLIENT = :1
Where you set field client?
This is my code I am not selecting client anywhere, I dont know from where "Display error" is fecthing client query.
Thanks a lot for your help.
PACKAGE BODY ORDERS IS
PROCEDURE post_query IS
BEGIN
SELECT     pa.ship_to_last_name,
     pa.ship_to_first_name,
     pa.ship_to_address1,
pa.letter_order_number,
     pa.letter_order_code,
INTO :ORDERS.SHIP_TO_LAST_NAME,
:ORDERS.SHIP_TO_FIRST_NAME,
:ORDERS.SHIP_TO_ADDRESS1,
:ORDERS.LETTER_ORDER_NUMBER,
:ORDERS.LETTER_ORDER_CODE,
     :ORDERS.DC
FROM packing_attr pa
WHERE pa.packing_id = :ORDERS.PACKING_ID;
end post_query;
END orders;
Thanks
Sandy

Cannot find the field for the Contact Role in Contact object.

Hi, friends,
I need to set Contact Role when creating new Account and Contact. I tried the following tests but cannot figure it out:
1. Create new Account and then new Contact, set the AccountContactRole in Account WSDL as “Main” but failed to set that field in form
2. Create new Account and then new Contact, set the ContactRole in Contact WSDL as "Main” but failed to set that field in form
3. Create new Contact and then new Account, set those two fields, but failed to set that field in form
So far I know, the Account Contact Role is kind of picklist type in Account Contact Field. I could find its customization in Admin-> Application Customization -> Account -> Account Contact Fields -> Contact Roles. However, I cannot find the exact item in WSDL file to map this item. The AccountContactRole in Account WSDL and ContactRole in Contact WSDL are suspicious.
It will be appreciated if anyone could help me on this issue.
Thank you very much
Ray
Edited by: user9015675 on Jan 19, 2010 2:59 PM

Hi, Sean, I tried the Web Service 1.0 call to create a new Contact and then a new Account with created Contact ID. But the CRMOD return the "Access Deny" fault. Is there somewhere I could see or change this kind of access rights? Or some bug in my web service call?
I am sorry I did not open a new topic thread as I think they are related and easy for reference. Thank you very much.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<AccountWS_AccountInsert_Input xmlns="urn:crmondemand/ws/account/10/2004" xmlns:ns2="urn:/crmondemand/xml/account">
<ns2:ListOfAccount>
<ns2:Account>
<ns2:AccountName>XXXX1264030832268</ns2:AccountName>
<ns2:ListOfContactRole>
<ns2:ContactRole>
<ns2:ContactRole>Main</ns2:ContactRole>
<ns2:ContactId>XXXX1264030828034</ns2:ContactId>
</ns2:ContactRole>
</ns2:ListOfContactRole>
</ns2:Account>
</ns2:ListOfAccount>
</AccountWS_AccountInsert_Input>
</soap:Body>
</soap:Envelope>
Return:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Server</faultcode>
<faultstring>Method 'SetFieldValue' of business component 'Account Contact Role' (integration component 'Account Contact Role') returned the following error:
"Access denied.(SBL-DAT-00542)"(SBL-EAI-04376)</faultstring>
<detail>
<siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault">
<siebelf:logfilename>OnDemandServicesObjMgr_enu_18122.log</siebelf:logfilename>
<siebelf:errorstack>
<siebelf:error>
<siebelf:errorcode>(SBL-DAT-00542)</siebelf:errorcode>
<siebelf:errorsymbol></siebelf:errorsymbol>
<siebelf:errormsg>Method 'SetFieldValue' of business component 'Account Contact Role' (integration component 'Account Contact Role') returned the following error:
"Access denied.(SBL-DAT-00542)"(SBL-EAI-04376)</siebelf:errormsg>
</siebelf:error>
</siebelf:errorstack>
</siebelf:siebdetail>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>

ChaRM Test Message SDTM - Tester role cannot be same as the developer role

Hi Experts,
When the developer raise a test message SDTM, The developer couldn't confirm the message as we get a warning as
" Tester role cannot be same as the developer role "
We cheked the roles of developer and tester, they were not same .
We checked the Assign conditions in SDTM, But it doesnt have any values.
Advance thanks to all those replies.
Best regards,
Vin

Hi Friend
System check the name in the ticket or the BP for the person of Tester and Developer
Every person has unique BP so if the same name is entered in the ticket as Tester and developer then system will give you this warning.Since SAP recommendation is to have Dev and Tester 2 diff person.
You can ignore the same if Tester and Developer is the same person and might be you have technically created different roles for the same.
Hope it clarifies.
Regards
Prakhar

NW developer studio cannot find J2EE Engine

Hi,
In Netweaver developer studion I cannot find Windows --> Preferences --> J2EE Engine. It is not in the list.
I have installed composite environment for portal development. Please advise. Thanks.
Regards,
FS

Pls. check the file
plugin.xml   in
"C:\<NWDS Install Directory>\eclipse\plugins\com.sap.ide.eclipse.j2ee.engine_<Version>\"
for entry like ,
   <extension
         point="org.eclipse.ui.preferencePages">
      <page
            name="SAP J2EE Engine"
            class="com.sap.ide.eclipse.j2ee.engine.ui.local.EnginePreferencePage"
            id="com.sap.engine.eclipse.PreferencePage">
      </page>
   </extension>
& if this plugin ( "com.sap.ide.eclipse.j2ee.engine_<Version>" ) is there at all in your NWDS ( "C:\<NWDS Install Directory>\eclipse\plugins\" ) , if not you can copy this folder from another sys.
Also , let me know if you see any folder like   "com.sap.ide.eclipse.j2ee.engine" in your workspace "C:\<Workspace>\.metadata\.plugins" & you have sufficient read - write permission on the file system.
Also, check the latest .log files in workspace "C:\<Workspace>\.metadata\" for any error.
Which version of JDK and NWDS are you in ? , try reinstalling it.
Hope this helps.
Thanks ,
Uppal

Cannot find Oracle Installer subdirectory on Forms developer version 6i

I need to package forms and reports I created using Forms developer version 6i and Reports Developer version 6i.
According to the Forms documentation file, I should be able to find the TEMPLATES\OISFP10 and the TEMPLATES\RELEASE subdirectories on the "Oracle Distribution media" (which I assume is the Forms and Reports installation CD).
I cannot find these subdirectories on my installation CD or anywhere on my drive.
Developer 2000 used to install these subdirectories in the 'c:\dev install' subdirectory. Forms and reports developer do not install these subdirectories anywhere. Could someone tell me please how to get or where to find these subdirectories. Thanks

Hi,
First use gunzip utility to unzip .gz file. Once you are done, you will get a .tar file. Use tar -xvf to untar the file to a directory. It is similar to unzip.
Regards,
Arun

I require Coldfusion 8 Developer Edition but cannot find the link

I specifically require Coldfusion 8 Developer Edition but cannot find the link anywhere. It appears as though links to it have been replaced with the Dev edition of CF10.
I require this for two reasons:
Firstly, it would be nice to be able to develop on my local PC rather than directly on the production site.
Secondly, the CFIDE folder has gone missing and I have been told that copying the one installed from a Dev edition will fix it.
Thank you.

This is on Windows 2003 Server 32-bit.
I found the original CF8 install file (coldfusion-80-win.exe) and the update to 8.01 (coldfusion-801-win_updater.exe) and used them to install the Developer Edition onto my local PC.
I then zipped up the CFIDE folder and sent it to the server, and extracted it into the correct place (on my server, it was under C:\ColdFusion8\wwwroot)
I had to change the CFIDE path in the \lib\neo-runtime.xml file to get around the "Could not find the ColdFusion Component or Interface CFIDE.adminapi.security" error.
And now it all works again. Thank you for your advice.

Where to find out the log file under java developer role

Hi,
I have some application created in NWDS. While running it after the PAR deployment and all. some exception is thrown. the exception iD is given. I was trying to find out wher the log files are located in the portal so that I can analyze the exception.
I think it is under the java developer role....but under that......I checked the log viewer tool and all.....but exactly where the log files would be located. so that with the exception ID , I can search and find out the log for the particular exception.
any ideas?
Thanks in advance.

Hi Steelman,
Use the search option in log viewer for this purpose. In the server it would be located in
<i>usr/sap/sid/jc00/cluster/server0/logs</i>
Hope this helps.
Regards
Bharathwaj

Developing Roles and transport strategy.

Hello,
I need to finalize the Role development Plan.
I am not sure where do we built , test and transport roles to production.
I am thinking of developing roles in development in dev in a seperate clint . This clint will be copy of golde client.
Then this roles will be tested in quality and finally send to production.
Hence forth any changed to role will go thourh same cycle.
Please suggest !!!

>There are some things which you cannot add into roles if they are not set up (responsibility area heirachies, profit centre groups etc) so you need to ensure that non-transportable config is also made in your security client.
Thats a imp point th to my that you have bought to my notice. Are there any coustomizing such no range and stuff that can not be transported?
I wonder if its the case then all coustomizinf will be need to be done in QUA and PRD system seperately as well.
Also one thing i would like to mention is that I am trying to avoid development of roles on Actual devement client cause I am afraid of hamppering the coustoming data which developing roles . Cause most of my development of roles will take place by trial and error method .
So I am aprehensive to use development cline and find alternatives

Cannot find CAF Developer Role

Similar Messages

Maybe you are looking for