Cannot find DAQ Assistant drivers..

I'm trying to run a program written (I believe) on 7.1 however when trying to run the program I have a series of missing VI prompts. I have been able to locate most of these on the old hard disk and have pointed to them, however I cannot find the Configure DAQmx Assistant.vi required for the VIs in the program even though I have installed NI-DAQmx 7.2.
I don't believe the other program was written with anything other than these resources so I'm a little confused. Was a later NI-DAQmx driver possible installed?

Hey Karen,
Firstly please ensure that you have installed the DAQmx drivers. You can download the latest version from the following link.
http://joule.ni.com/nidu/cds/view/p/id/1614/lang/en
Please check the readme file, to ensure that this software supports your version of LabVIEW (I am fairly sure that it does).
As a rule of thumb you must always install the drivers AFTER you have installed the application developement enviroment (in this case LabVIEW 8.5.1). Once this has been been done, you will find the llb file in the following location.
C:\Program Files\National Instruments\LabVIEW 8.5.1\vi.lib\express\DAQmx\DAQAssistantConfig
You will find the DAQ assistant in the "functions pallete" on the block diagram, by navigated to Measurement IO >> DAQmx >>DAQ assistant - or by searching for the assistant.
Best wishes,
Rich R
Applications Engineer
National Instruments UK & Ireland

Similar Messages

Cannot find Win8.1 drivers for Qosmio X70-A-11L

Hello,
Lately I cannot find anywhere driver support for my model, X70-A-11L, no matter where I search for them. Does anyone know why Toshiba has removed these drivers and what are the alternatives?
Thank you.

Hi
Please visit http://www.toshiba.eu/innovation/generic/windows8_1-message/
There you will find all you need.
Model compatibility check on Toshiba Compatibility Matrix and link for Windows 8.1 Drivers Page.
Your notebook model is listed there.
Good luck

Can't find DAQ assistant in LabView

Hi! I installed the NI-DAQmax driver 9.3.5 after installing LabView 8.5 Student edition and I am not able to find the DAQ Assistant in the function palette. Could you please let me know what else could I do?
Thanks!
Solved!
Go to Solution.

suriguvi88 wrote:
i am using labview 2012 and i tried to intall daq version 9.1.7 and the harware i am using is NI USB 6009
I'm not finding a DAQmx version 9.1.7. Even then according to this fancy chart, You need DAQmx 9.5.5 or newer (currently up to 9.8) to work with LabVIEW 2012. If you don't have the driver disk that came with your copy of LabVIEW, I would recommend downloading the latest version (DAQmx 9.8).
suriguvi88 wrote:
and if i want to use the bio-medical tool kit for labview 2008 is it possible ??
There was never a LabVIEW 2008. Do you mean 8.6?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Tecra A2 - Cannot find applications and drivers CD for download

Hello Support,
I can not find anywhere on the Toshiba Site the "TECRA A2 Applications and Drivers CD".
Why do you make it so hard for your customers to find all necessary drivers in one place?
Provide me with a link to a Download of the full Drivers disk please.
The drivers downloads page lists 30 single drivers instead of offering a package.
Thanks.

I agree with you about the Cd with drivers and applications. A friend of mine bought laptop, not Toshiba, with supplied windows 7 32/bit/64 bit disks and driver/application disk. So he doesn't have to make a recovery disk, they are already done and supplied. The same thing with drivers, he just need to insert disk and installed them one by one according to the shown list. Therefore, he doesn't need to make a search and ask about the right installation order. For every notebook, the installation is different.
In this forum, I 've found a thread about the driver installation:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=193110&#193110
Maybe, you find it useful.

Cannot find Windows 7 drivers for Satellite M110

I am looking a upgrading my Satellite M110 from XP to windows 7 via clean install.
I had a look on the Toshiba website to find drivers for my pc (M110) but I couldnt find any for windows 7.
Does anyone know if they are available on Toshibas website or anywhere for that matter?
Thanks in advance.

Hi Jared.
I'm not sure if you're still facing problems with Win7/M110 but I've upgraded my M110 with it and it works fine (except for one point I mention below). I have managed to successfully install the following programs:
SM110 tctrls-3222700-XP Toshiba Controls
M110 TOSHIBA Assist-20000Vista Toshiba Assist
M110 TOSHIBA Hardware Setup-20003Vista Toshiba Hardware Setup
M110 TOSHIBA Extended Tiles-100Vista Toshiba Extended Tiles For Windows Mobility Center
M110 ENE Card Reader-300Vista ENE Card Reader
SM110_C_Modules_25060CXP Common Modules
SM110 thu-10001Pl-xp Toshiba Hotkey Utility
SM110 tpadonoff-10001PL-XP Toshiba Touch Pad On Off Utility
Which are a mix of XP and Vista but do the trick for my 32 bit Win7. They can be found at:
http://www.mytoshiba.com.au/support/notebooks/satellite/m110/psmb0a-01l00d/download#filters
I was wondering, if you had managed to get it all working; were you able to get a working Toshiba Power Saver installed? The XP version doesn't work and I can't seem to find a Vista version of it.
Message was edited by: jmot205

Cannot Find backup Assistant

So I bought a phone from a private party. He had the phone rooted, whatever that means. So I now go to upload all of my contacts through backup assistant yet I am unable to find the app. Any ideas where I can download it or find it so I can put it back on my phone? Thanks

Hi there Mseldredge!
Having your contacts is really important. Although I can't assist with the phone alteration, I do have a couple of recommendations.
You can transfer your backup assistant applications to your gmail instead. Follow these steps please:
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=27566
The second option is to Hard Reset your phone, but that may or may not remove the alteration. You can find those steps here:
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=33552
Please keep us posted!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport

Cannot Find WIndows 7 Drivers for C55-B5142

Hello,
I recently bought a toshiba C55-B5142 laptop with Windows 8.1 installed. I am trying to downgrade and do a clean install of Windows 7. When I search for drivers for my computer I am unable to find any for Windows 7 64bit or even Windows 8.1. This is the first time I've seen a manufactuer not providing drivers for a clean install. Can anyone point me in the right direction so I can do a clean install and install the correct drivers?
Thank you, Much appreciated
Sunny

I doubt Windows 7 drivers were made for it, but there should be Windows 8.1 drivers. I believe that's a problem with the support site. I'll report it and get back to you when I have confirmation that's it's been fixed.
- Peter

Satellite L550-18M - Cannot find any Touchpad Drivers

Hello.
I just bought a Toshiba Satellite L550-18M and I can`t seem to locate any drivers for the full use of my touchpad (can`t use scrolling, nor zooming functions).
I tried installing some synaptics from the our sugestions official website and some synaptics drivers from a Toshiba Satellite L500D, but it didn`t help.
Please send your suggestions.
Thanks

Hi mate
I dont know what Windows OS you have but I assume you are using Win 7 64bit. Right?
The L550-18M belongs to PSLNEE series.
It seems that there are no many drivers published for this series.
But there are touchpad drivers for other Satellite L550 series.
The Alps Electric and Synaptics touchpad drivers are released.
In driver download form choose;
- Satellite
- Satellite L series
- Satellite L550
- All (short model)
- All (operating system)
- Touchpad driver
Then you will get all drivers for touchpad.
PS: be sure that the touchpad settigns are configured in control panel -> mouse -> device settigns

Cannot access my account, cannot receive email verification code, cannot find online assistance

I need to login to my account. For whatever reason, I'm being asked to verify my identity, but only given the option of receiving a verification code via email. How about the option of a text or security questions?
I believe my provider blocks Best Buy email, because they're not being filtered out as spam. Somehow I get marketing ads via email, but I never receive order confirmations or order updates. I'd like to get in to my account and perhaps change my email, but guess what, I can't get in! You also have no semblance of online support. Please help!

Hi Superfriend,
I can imagine how frustrating it may be to want to access your BestBuy.com account, find attempting to do so futile! It would certainly hinder you from getting the most out of your online shopping experience.
I am sorry to hear you have been stuck at the identity verification page as you seem unable to receive the verification code email. This is a step we added for additional security purposes, and I apologize if you have found it at all inconvenient. Unfortunately, I was unable to locate your BestBuy.com account utilizing the email address you registered with the forum.
That being said, I am sending you a private message to gather the details necessary to look into this further. You may check your private messages by signing into the forum and clicking the
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Re: Cannot access my account, cannot receive email verification code, cannot find online assistance

Having same issue as previous member that requested access to their account. My account was set up with an email
no longer in service. The code is being sent to an email address I cannot access. Is there any way to change the email to {removed per forum guidelines}? Thank you.

Hi gpapaz,
I’m sorry for the very late reply. We’ve been playing catch up on the forum ever since Thanksgiving, so I truly appreciate your patience while we worked our way to your post.
I certainly don’t want you to be stuck with an account you can’t get into. However, I’m unable to locate your online account to see if I might be able to help modify it on your behalf to the email address you’d prefer. Please send me a private message with as much of the following information as possible.
Full name:
Email address currently associated with your account:
Phone number:
Zip Code:
You may send me this private message by logging into the forum and clicking on the envelope icon in the upper right-hand corner of the page.
I hope to hear from you soon,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

Cannot find all XP drivers for Satellite Pro P200-15W

Hello everybody.
I've just installed XP Professional and now i'm having problems with some drivers. The Notebook is a Satellite Pro P200 15W, and the drivers are:
Graphic Card (The product specification says it is an Ati Mobility Radeon HD2600, and i haven't found the driver)
Wireless Card (The two drivers in toshiba's download page do not work)
Audio Device on High Definition Audio Bus (I've installed the audio driver, but after this, appears this "new" device)
Also, it appears an unknown device and i have no idea about what it can be
I've been looking in a lot of pages and forums, and everithing i've tried has failed.
Can anybody help me?
Regards, and thank you

I've just installed all the drivers excepting 2. These drivers are:
1.- Autdio Device on High Definition Bus
2.- PCI Memory Controller
I have not found any driver for these devices.
Also, i have som problems with Toshiba Hotkey Utility and FN Key, cause hotkey utility is installed but dont works, and the FN Key only controls keys Esc, F1, F2, F3 and F4, but not F5 (Monitor device selction), F6 and F7 (Brightness control), F8 (Wireless on-off) and F9 (Touchpad On-Off)
Finally, i have a problem with toshiba Power saver. Being Administrator, when i try to open it from Control Panel it says that i have no rights to use toshiba power saver.
Anibody knows how to solve these problems?

Daq assistant vi for trial version

Hi guys. I didn't find daq assistant express vi in labview 2009 trial version. I want to use this after analogue device simulation in MAX for various analogue signals. Can anybody please send me vi template code for daq assistant.
Many thanks for your support.

Hey Guys,
Ravens Fan is absolutely correct. When you install DAQmx, not only will it install drivers for all NI DAQ devices it will also install support for any NI application development enviroments you may have installed - including LabVIEW. (Note: it is therefore important to install DAQmx after you have installed LabVIEW).
The following link takes you to a location where you can download the latest version of DAQmx.
http://joule.ni.com/nidu/cds/view/p/id/1444/lang/en
Not that is a fairly large file, so you may want to download it over night.
Best wishes,
Rich R
Applications Engineer
National Instruments UK & Ireland

Can't launch DAQ assistant in LabVIEW

Hi
I cannot launch DAQ assistant from LabVIEW, but i can do that from MAX. DAQ from MAX is not that flexible because i can't customized the code or convert it. I 've tried all the various ways to open DAQ assistant and i finally realized something, on the block diagram, i open Tools/Advance/Edit palette/Express/Input/DAQ is missing (question mark) and many more functions are missing.
I'm using the evaluation software of Labview 8.6 and NIDAQmx 8.7.1
Can you please tell me what is wrong. I really need to launch NI DAQmx from LabVIEW.
Rgds
Paul
Solved!
Go to Solution.

Hi Christ
Thanks for the feedback.
From Block diagram interface: Function palette/Measurement
I/O ? (there is nothing just MAX config).
But from Front Panel: Modern/ I/O controls, i can see DAQmx names controls
which i don't think i need now.
What do mean reintalling DAQmx with LV
support, is it different from the LabVIEW evaluation software or i just have to
reinstall the LV
evaluation software.
Rgds
Paul

DAQ assistant block

Hi, in my block diagram (labview), i cannot see DAQ assistant block. i check it by going express- input. But i donot see DAQ assistan block. if you please tell me.

Did you install DAQmx after installing LabVIEW?
LabVIEW Champion . Do more with less code and in less time .

Error message "The system cannot find the file specified." when reinstalling C3180 drivers

Hello,
I experienced scanning problems with my C3180 and the error message indicated several solutions, including to reinstall the driver.
I worked my way through the list of fixes to this option. I uninstalled the drivers, downloaded
File name:
AIO_CDA_NonNet_Full_Win_WW_130_140.exe [1/1, 290.27M]
from www.hp.com/support and attempted to install.
Just after the accept licensing screen, the system begins a screen with four steps, the first of which is Checking System. Shortly after starting this, I receive the error message "The system cannot find the file specified.". The file name may be in the message header, but I cannot determine it due to the path length. It is off the displayed screen. (see screen image capture)
Closing the pop-up error message or clicking OK terminates the installation.
I am re-installing on a Dell Latitude E6510, running Windows 7 Professional, Service Pack 1, 64 bit. The printer was connected via USB, but I have disconnected for this stage of the install.
I appreciate any assistance/advice you can offer.
Kelly

Hi justkelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the printer to your computer.
I have a link that I would like you to click on. In the steps on the link, please do step 1 and step 2 seeing that you are using Windows 7.
Installation issues.
Please let me know if this resolved your issue. I will be more than happy to offer more assistance if the link does not resolve your issue.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Cannot find DAQ Assistant drivers..

Similar Messages

Maybe you are looking for