Cannot find data to erase from harddrive

I have reformatted the hard drive, installed the necessary programs, but cannot eliminate the data.
In fact, I CANNOT FIND IT.
"My computer" shows the hard drive ()x200) as having 22.6 gb available out of 320 gb. But whan i open up folders to find what is there, nothing appears except "Folder is Empty".
Of course, the computer is slow as molasses and I need to clean it out.
I have backed up the datea to a
SATA drive so I no longer need it.
Anyonw have any ideas?
Thankis
RAM

Let me guess, you use window to format the driver?
You may want to take a look at clicking on the window icon, right click on computer>-manage->Disk management and see if there are any partitions that are unformatted.
Alternatively, you may want to download a free and great tools called partition wizard. zap the whole harddisk and see if the empty spaces comes back.

Similar Messages

HT1655 my i pod shuffle (3rd genration ) is not seeing in itune and all data is erased from there.

hi i try to reset ipod shuffle(3G) via itunes but as i chossen dan all data got erased from ipod and now i can connect my ipod to itunes

The three music came with your operating system.
Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

Cannot find Data Neighborhood in NI-DAQmx Base to create a Task

I cannot find Data Neighborhood in NI-DAQmx Base inorder to create a Task.
I am trying to follow the "Learning with LabVIEW 8" tutorial book.
I am using a NI USB-6008, and have downloaded NI-DAQmx Base 3.0.
The book says to right click on Data Neighborhood and "Create New". I cannot find Data Neighborhood anywhere. The help documents referance Data Neighborhood but I still can not find it. Is Data Neighborhood not in the base version?
Please Help Thank you

Hi Lazysmartperson,
DAQmx base uses a different utility to create tasks. This is called the NI DAQmx Base Configuration Utility. It can be found in Windows by going to Start » Programs » National Instruments » NI-DAQmx Base » Utilities » C Interface. The reason behind this is because NI DAQmx Base is typically used on non windows operating systems such as Linux, Mac OSX, and some RT systems. Since there is no Measurement and Automation Explorer (MAX) for these operating systems we use a different utility for customers to configure tasks. If there is no specific reason you cannot use DAQmx, I would highly recommend switching to it. Our DAQmx driver is fully supported within MAX and should show up as in Matthew's last post. If you are looking to develop in DAQmx Base so that the applications can be used later on Linux, Mac, or other DAQmx base supported operating systems, I would suggest taking a look at the DAQmx Base Configuration Utility.
I hope this helps,
Paul C.

Cannot see data in BSO from transparent ASO partition

I have 2 cubes: BSO (target) and ASO (source).
BSO should show data from ASO corresponding element "Fact" from dimension "Scenario".
I can see the data using ASO directly, but I cannot see data viewing it from BSO using transparent partition...

Hi,
When you have the data in the ASO( i.e source cube) ,it should reflect in the BSO ( i.e destination) . I am sure there is problem with the transparent partition ,you had created .Validate and share more info of error ( if you encounter during partition creatino) , that should be resourceful
Sandeep Reddy Enti
HCC

Cannot find picture when transferring from Aperture to PSE 11

Cannot find picture when transferring from Aperture to PSE 11
I have an older version of PSE and when I transferred a picture from Aperture to PSE9 it would open PSE9 and show the picture.
I set the Preps in Aperture for PSE 11 and the PSE 11 opens but no picture in the box or photo bin or in the top left "open".
I changed the Aperture setting to the PSE Organizer and the same thing happened Organizer open BUT there was no picture to be found.
In Aperture it shows the file being transferred.
I looked in the PSE 11 preps and file but could not find anything.
The fact that it opens the PSE 11 app tells me it is being recognized but the picture (file) is going somewhere else.
Thanks
Greg

Hi Greg
Make sure you are linking to the application in Support Files and not to an alias.

NEED HELP cannot find data

Hi all
I just developed a registration application using netbeans 6, glassfish and mysql, JSF EJB
The program runs perfectly apart from a little instability from netbeans. But after the success page has displayed, i Cannot find the data I persisted in the database.
Can some one help me since i'm a bit new to this.
Thanks in advance

Sorry but my problem is that after the persistence, i could not find the data I entered in the JSF register page.
The progran first displays a register page:
after validation the backing bean invokes the session bean method to save the data.
The method returns a string which is then used in faces config to display the login page.
Well when I run the program, everything works fine.
then i enter the select command in the mysql server console to view the data but the new entry could not be found in the database
Is it that the program is faulty or the data was not saved since there was no exception or error dispalyed

Solaris 10 x86 b72 "Cannot find boot.bin" booting from SCSI.

Hello,
After several gyrations of installation attempts and dealing with early BIOS PnP issues, I've finally managed to get Solaris 10 x86 installed on an old dual P2 333Mhz system. So far the system is running flawlessly, but I'm still not able to boot directly off the SCSI disk. The primary boot handler is erroring out that it cannot find boot.bin.
I can boot fine off of the IDE CD drive and the floppy (currently pointed to autoboot into the SCSI disk as a workaround). But when I try to boot directly off the SCSI drive, I get the error from the Solaris boot manager that it "Cannot find boot.bin".
I have booted off the CD & Floppy and compared the /boot files from both the CD & floppy, but I cannot find any difference that would prevent the primary boot loader from finding boot.bin. I've even compared files to make sure they were not corrupt, and even force re-installed the boot handlers, and manually partioning, always with the same results. I've also tried both enabling and disabling the DOS >1G translation of the Adaptec SCSI BIOS with no change. I can't find any reason that the boot loader is not seeing boot.bin, or that the file is corrupt in any way (even after several wipe and install attempts).
My System is:
Supermicro P6DLS dual Pentium II 333MHz & 512MB RAM, w/ Adaptec 7880 SCSI-UW and IDE (whopping UltraDMA 33) interfaces.
CD/DVD reader is configured as the secondary master (moved from primary master in an attempt to fix boot problem)
HD is a 16GB UW SCSI disk.
(Other particulars ommited unless someone feels they are relevant to the boot process).
The system came to me with Windows 2000 installed and functioning. I also had Fedora Core 3 installed, both with no boot problems of the SCSI disk. (Although FC3 would not see the second processor even with the canned SMP kernel).
This system is intended to replace a Fedora Core 3 system to be a multi-purpose firewall gateway & proxy server and I'm really liking the performance I'm seeing with Solaris 10 on this system but would like it to be able to go through a normal boot process and not have to depend on a floppy as a boot device to get started.
Anyone have any ideas why the Solaris x86 boot loaders think that they cannot find boot.bin when the full /boot partion is intact?
TIA,
-Troy

I'm getting the same problem trying to install
Solaris 10 in VMware from DVD.
It brings up the Solaris Primary Boot Subsystem, so
it appears to be reading fine, but the only thing
that happens is I get the Cannot find boot.bin
error.Hmm, the "Cannot find boot.bin." message comes from the
CD/DVD's boot code, which is contained in the first 16 sectors
of the media.
The boot.bin file is supposed to be read from the Solaris UFS
slice, which starts at 512 byte block #5151360 (or 2048 byte
dvd sector #1287840). This a byte offset of ~2.6 GBytes.
Maybe an issue with your system's bios not being able to read
DVD media > 2GB, during DVD boot?
Or a problem with burning the DVD media? Maybe some
"smart" PC DVD burning software has decided only to record
the 2.6 GB ISO filesystem, and the 100 MB Solaris UFS
filesystem that follows the ISO filesystem is missing on the DVD?
Or a 2GB filesize issue while burning the DVD?
Do you have a pc / windows utility that can print some information
about the S10 DVD media, especially the size of that DVD?
Maybe your CD/DVD recording software?
The original S10 GA x86 DVD image has a size of 2732195840
bytes, or 1334080 2K DVD blocks.

Cannot find networks after wake from sleep

I cannot find anyone else posting with this exact issue. Ever since the 10.5.8 update, my 13" MB Pro will not see any of the 10 wireless networks around my place. If I turn the Airport connection off and on again, it seems them and immediately connects to my network as well. Yes, I've zapped the PRAM.
Anyone have any experience with this exact issue?

I'm having, I think, the exact same issue. Since installing Snow Leopard, my internet connection is fine while the computer is awake. However, every time I return from shutdown/sleep or restart, I get the message stating "Your chosen network is not available, please choose another" (or whatever the actual wording is). So I click on the network icon and sure enough, my network is in the list, but I have to click and type my password every time. I've been looking into forums and suggested fixes; so far, to no avail.

Cannot find 'HTTP... from Windows Live Mail

Using both FireFox 8.0, then 9.0 as my default browser, I get the error "Windows cannot find 'http:...." when I click on a link in an email in Windows Live Mail. The error note remains, but after a few seconds, FireFox opens the desired link page.
This doesn't happen when I set IE7 as the default browser. It simply works without the error note.

What password do you use to log onto MyBT. The old one or the new one?
https://home.bt.com/login/loginform?TYPE=33554433&REALMOID=06-f1aca0f0-9277-1028-a2aa-843bdb4e0000&G...
If it is your old password there appears to be a glitch when changing email passwords, it is not changing the password in MyBT so it causes a problem when logging on via an email client.
If you change the password of MyBT it does change the email password as well.
(I may have gotten this the wrong way round because I haven't tried it. ie changing MyBT does not change email password and changing email password does change MyBT password.)

Cannot find photos to attach from Mail

I am using a MacBook Pro (a friend's), and we've run into a problem I've never seen before. When we try to attach a photo to an email using Mail, and we navigate to the iPhoto folder, there are only a handful of folders within each year's folder, and those don't seem to have the actual photos in them, only data files. I am baffled by this, as I can attach any photo to my email in Mail by simply navigating to the right dated folder within my iPhoto folder. Does anyone have any idea why this might be? We've opened up his iPhoto, and the pictures are all dated and in the proper order.
thanks in advance....

Hello, I am having the same problem. I have a Agfa 1680 camera that will only work on 9.2.2 OS. All my photos have to be uploaded to Agfa image file. Then I import to Iphoto in 10.4 OS. With Iphoto 2.0 I was able to import just one photo. With Iphoto 6 when I try to Import, can import only complete Album, images just show gray shadow and do the same when wanting to attach to email. The Agfa images were JPG, but some people couldn't see them when I sent them. I would import to Iphoto and attach to email, then they could see pictures. In iphoto2 it was easy to find image, but with Iphoto 6 they seem to disappear. I installed 10.4.6, 120GB harddrive and Ilife'O6 just before Christmas. Both harddrives are bootable in 9.2.2 and 10.4. I was in 10.4 on 120gb drive last night trying to attach picture to email. I cleaned all the images out of that file and started over. When I restarted & opened Iphoto on 60GB drive it completely rebuilt Iphoto Library on 120GB hard drive back to the same as one on the 60GB drive. I have IPhoto6 application installed on both harddrives. Apple made it harder to find and attach images to email from Iphoto. I also backup all my files to an external Acomdata USB 2.0 60GB harddrive.
Dual 867 Mhz PowerPC G4 MDD, 60GB master bootable, 1.75 SDRAM Mac OS X (10.4.6) 9.2.2 Classic dual platform, HP photosmart 2575 all-in-one, 120GB WD Bootable
Dual 867 Mhz PowerPC G4 MDD, 60GB master bootable, 1.75 SDRAM Mac OS X (10.4.6) 9.2.2 Classic dual platform, HP photosmart 2575 all-in-one, 120GB WD Bootable
Dual 867 Mhz PowerPC G4 MDD, 60GB master bootable, 1.75 SDRAM Mac OS X (10.4.6) 9.2.2 Classic dual platform, HP photosmart 2575 all-in-one, 120GB WD Bootable

Cannot find how to export from Pages to ePub

I have Pages '09, and looked on Apple's tutorials for how to export as an ePub file... It says just click share, export, ePub, but I do not have an ePub option. My only options are PDF, Word, RTF, and Plain Text. Am I missing something very obvious?

It's interesting that 'they' have decided to NOT let folks on 10.4 produce an ePub (from Pages). I understand that I cannot 'do' the whole ePub consumer side on this machine but I was hoping to get a bit of a headstart while on the road. (The mini at home base is running 10.6 and is my ePub production environment. That version of iWork9 does have the later Pages, which is why I was surprised when I could not find the same UI on my 'travel' machine.)
As to why I don't upgrade the G4? I need one machine that can run Classic. So it will live at 10.4.11 for the rest of its life.
I have my fingers crossed that today's announcement will include a suitable Macbook Air update ... one that is not too wide and/or too high. (The 13" 'books have been too large a footprint to replace my trusty 12" so I've been holding out...)

This is a hint to anyone who cannot find their airprint printer from their ipad: after 10 hours of trying everything imaginable, i can now print directly from my iPad by turning off the bluetooth in settings and waiting for 30 seconds. presto!

after spending a full day and a half trying everything imaginable, i finally found a way to get my ipad to find my new airprint capable printer. I could print from email or the cloud, but not directly from my ipad. After reading a discussion about bluetooth printers, i turned off bluetooth in settings, waited 30 seconds, and voila!! I was able to print directly from my ipad. Try it if you are having troubles

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Cannot find deployed Remote Bean from external client

I have a very simple Stateless Session bean running in the SAS PE 9, which from what I can see has been successfully deployed. The application is listed as enabled in the Admin Console. Likewise, when I look at the JNDI tree, I can see the following entries at the top:
com.intecbilling.svConnectorHarness.TestRunnerRemote
This is the name of the Remote Interface, that I have defined for the ejb TestRunnerBean. It does very little:
package com.intecbilling.svConnectorHarness;
import javax.ejb.Stateless;
@Stateless
public class TestRunnerBean implements TestRunnerRemote, TestRunnerLocal {
    public void runTest() {
        System.out.println("Running test!");
}and the Remote Interface is
package com.intecbilling.svConnectorHarness;
import java.rmi.RemoteException;
import javax.ejb.Remote;
@Remote
public interface TestRunnerRemote {
    void runTest() throws RemoteException;
}Now, I'm trying to call this runTest() method from an external client. The client code looks like
    public void connectUsingJNDI(String paramName) throws NamingException {
        Properties env = new Properties();
        env.put("java.naming.factory.initial", initialFactory);
        env.put("java.naming.provider.url", providerUrl);
        String myJndi = jndiName;
        if (paramName != null) {
            myJndi = paramName;
        Context ctx = new InitialContext(env);
        System.out.println("looking for " + myJndi);
        Object returnedObject = ctx.lookup(myJndi);
        System.out.println("returnedObject=" + returnedObject);
    }I am using:
- com.sun.jndi.cosnaming.CNCtxFactory as the initial factory
- iiop://<machineName>:3700 as the url. I'm using 3700 because that is the port against which my appServer's orb-listener-1 is using
I've tried to look for the JNDI name of
com.intecbilling.svConnectoryHarness.TestRunnerRemote
because that is what is displayed in the JNDI View. When I do this, I get the following error:
/svjca-src> runMe.sh com.intecbilling.svConnectorHarness.TestRunnerRemote
looking for com.intecbilling.svConnectorHarness.TestRunnerRemote
javax.naming.NameNotFoundException [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]
     at com.sun.jndi.cosnaming.ExceptionMapper.mapException(ExceptionMapper.java:44)
     at com.sun.jndi.cosnaming.CNCtx.callResolve(CNCtx.java:484)
     at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:523)
     at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:501)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at com.intecbilling.svConnectorHarness.TestRunnerClient.connectUsingJNDI(TestRunnerClient.java:42)
     at com.intecbilling.svConnectorHarness.TestRunnerClient.main(TestRunnerClient.java:57)
Caused by: org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0
     at org.omg.CosNaming.NamingContextPackage.NotFoundHelper.read(NotFoundHelper.java:72)
     at org.omg.CosNaming._NamingContextExtStub.resolve(_NamingContextExtStub.java:406)
     at com.sun.jndi.cosnaming.CNCtx.callResolve(CNCtx.java:470)
     ... 5 more
Now, no matter what I do, I get this. Running with the AS jars in the classpath or not. Running with the following system variables
-Dorg.omg.CORBA.ORBClass=com.sun.corba.ee.impl.orb.ORBImpl -Dorg.omg.CORBA.ORBSingletonClass=com.sun.corba.ee.impl.orb.ORBSingleton -Djavax.rmi.CORBA.UtilClass=com.sun.corba.ee.impl.javax.rmi.CORBA.Util
Also provide me no joy. I've also tried using the JNDI format with the corbaname embedded in it (looks like corbaname:iiop:machinename:3700#com.intecbilling.svConnectorHarness.TestRunnerRemote) and I get the exact same exception.
From what I'm seeing, I'm finding the remote NamingContext, but it doesn't like the JNDI name. I've tried fully-qualified names (as it is displayed in the JNDI tree) and unqualified names with the exact same results. From all of the posts I've read, I've tried all the various combinations that I can see to no avail. Is there a security issue going on here? I haven't enabled any security at all. I'm running out of ideas, and if I can't get any joy, I'll probably have to use a different app server to play with.
Thanks for any help,
Ed

Hi Ed,
We have an EJB FAQ entry that describes how to access Remote EJBs from a stand-alone (non Java EE) client. In a nutshell, put appserv-rt.jar in your classpath and instantiate the 0-arg InitialContext constructor. You can find more details here :
https://glassfish.dev.java.net/javaee5/ejb/EJB_FAQ.html

Why cannot find data movement for clone database option on OEM 11gr2

Hi Expert,
I have Oracle 11gr2 11.2.3 normal OEM install to monitor our RAC database. When i go click data movement option, i can't find the clone database option. Any idea why ? Thanks

Hi;
Similar question mention in below links:
Clone Database: Select Destination in OEM 10g Database Control
Also see:
http://www.stanford.edu/dept/itss/docs/oracle/10g/em.101/b12016.pdf << part 6-6
Regard
Helios

Error message - cannot find where its coming from

Hi Guys,
I have a default error message setup, and I need to get rid
of it for debugging purposes.
Problem is, I cannot remember where the template is coming
from.
Theres nothing setup in application.cfm. Is there anywhere in
cfadmin where it might be set?
I'm using CF 7
Thankyou

Mattastic wrote:
> Hi Guys,
>
> I have a default error message setup, and I need to get
rid of it for
> debugging purposes.
>
> Problem is, I cannot remember where the template is
coming from.
>
> Theres nothing setup in application.cfm. Is there
anywhere in cfadmin where it
> might be set?
>
> I'm using CF 7
>
> Thankyou
"Site Wide Exception" handler configured in the Administrator
most likely.
<cferror...> tags potentially embedded in your CFML
files.

Cannot find data to erase from harddrive

Similar Messages

Maybe you are looking for