Cannot find default Portal error iView DedicationAlerter

Hi,
I would like to have the default portal error iView collapsed as per default to avoid showing a long stack trace. The path to the default iView can be set here:
a.      Choose System Administration -> Support ->Support-Desk -> Portal Runtime -> Workload Distribution Configuration.
b.      Click on folder Workload Distribution Configuration.
c.      Go to edit mode for service DistributionConfiguration.
d.      In the field Default Alert iView Name enter the desired iView path and click on Apply.
I can see here that the current default error iview is called: com.sap.portal.supportability.isolde.DedicationAlerter
But where in my PCD can I find this iView so that I can either change a property on it or make a copy to customize? I have done a PCD search and it does not seem to exist.
Or is there another way I can accomplish the same? I know about the Visual Admin settings like DEVELOPMENT_MODE and DetailedErrorResponse but the problem is that they also remove the first line of the stack trace. I would still like to display that line to help support.
Br Jan

From the setting as you have mentioned previously I think it is directly calling the portal component.
Probably you can have you custom component name in there and see. (download the existing par, do necessary modifications and upload with a different name)
Regards,
Mahesh

Similar Messages

Gnucash startup "cannot find default values"

I keep getting the error "cannot find default values" when launching gnucash 2.4.8-1.
I tried "Setup" and "update search path" and "install into home directory" options, but neither of them seem to fix the problem - the error message keeps reappearing after launching gnucash.
Any idea how to fix this?

I am using FM10 in Windows 8 (I occasionally get this error whenever adobe products are updated on my machine)
If you work in a more controlled environment (Federal Subcontractor with administrative controls everywhere), I contact my IT department , or if you have the administrator rights, perform the following steps:
Launch command prompt as administrator.
Type “appwiz.cpl” press enter
Right mouse click on Adobe Acrobat Pro and select change
Select repair and click next.
If necessary enter administrative credentials when requested.
Reboot workstation

Fix "Windows cannot find" designated webpage error on launch; only with Epic, not firefox.

When Epic is launched from a desktop Icon calling for a particular web page, it throws up a "Windows cannot find" Specified site error box, but then goes ahead and loads the site. It only happens with Epic; never had this problem with the regular Firefox browser.
I make these Icons by dragging from the address bar once I reach the site. It is a quick way to return later.
Very frustrating, please help.

Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem.

Cannot find default font

Hi,
When booting I can see the message "Cannot find default font" just below the Arch logo. Nevertheless everything works fine afterwards but it's an annoying message that started appearing just a few days ago after I changed the consolefont in rc.conf to lat10. Can anyone help me to get rid of it?
Thanks

I also thought that that was the problem, but my rc.conf is right:
LOCALE="es_ES.utf8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Madrid"
KEYMAP=es
CONSOLEFONT=lat0-16
CONSOLEMAP=
USECOLOR="yes"
I have another computer with the same settings and the message does not appear.

Error Opening Reports (Cannot find Dimension Scenario, Error executing query: the member null doesn't exist in this application)

Hello,
two of our users get the following error message, when opening two specific reports:
First Report: Cannot find Dimension Scenario.
Second Report: Error executing query: the member null doesn't exist in this application.
Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
I set the same rights for me, but i can access the reports without problems.
Somebody encountered the same problem before?

Hi there,
I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
In order to fix it:
1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
3. If he cannot see the dimension, try to change the layout of the report.
Regards,
Thanos

Cannot find key chain error

Since upgrading to Yosemite, I have been getting errors that indicate the system cannot find my key chain to store passwords. How might I fix this?

If you've just changed your login password in Recovery mode, follow these instructions. Otherwise, see below.
At some point, you may have reset your keychain to default in Keychain Access. That action would have caused your login keychain to be renamed.
Back up all data before proceeding.
In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Keychains
In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login_renamed_1.keychain" to "login.keychain". You can then close the folder.
Back in Keychain Access, select
File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

Tons of Cannot Find SQL Server errors in ULS log

Background: I inherited the maintenance of this farm. The previous consultant migrated the client from WSS 3.0 to 2013 by way of 2007 MOSS and 2010 (unsure of version). I do not know if there was a "temporary" SQL server used during this process
that no longer exists. It seems likely given all of the errors regarding a missing SQL server.
The current 2013 Enterprise farm contains 1 WFE and 3 App servers, 2 of which comprise the search topology. There is one SQL server, not aliased. All machines are VMs. One of the search servers (App) is on a different ESXi host. The timer job that is creating
all of the ULS errors is running on the WFE. Beyond that, the farm has these symptoms:
It "works" albeit very slowly. Crawl rate of 2-7 dps for both external file shares and the SP content (both with and without Task Offloading / Chimney Offloading enabled). It seems to frequently recycle or take an otherwise long time to render
in the browser (any page). Finally, it spews tens of thousands of errors 24x7 on the WFE saying a SQL server (unnamed) cannot be contacted via Named Pipes.
Specifically: "Unknown SQL Exception 53 occurred. Additional error information from SQL Server is included below. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or
was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)".
The next error in the sequence is: "An internal error occurred while running a timer job: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject,
UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)..."
This is followed by an error such as this: "There was an internal error invoking the timer job '{E4DDC92E-0056-4E7E-BD3F-1CF5670ACB7D}' for service '{6105D588-FB34-4F1C-82F6-479D7FE146EA}'."
Of course, each time the timer job mentioned is different.
One more error appears consistently with these although not as frequently: "The Execute method of job definition Microsoft.SharePoint.Diagnostics.SPDiagnosticsMetricsProvider (ID 36e6942a-9a80-440f-94a4-e4a606362734) threw an exception. More information
is included below. Connection Timeout Expired. The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement. This could be because the pre-login handshake failed or the server was unable to respond back in
time. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=21276; handshake=0;"
I have been troubleshooting this for days but am not making much progress. How can I determine just what SQL server it says it cannot find and where that server name is stored? It seems like it has to be part of the Timer job configuration since the two
things are related.

Hi,
Thanks for your sharing and have a good day.
Jason
Jason Guo
TechNet Community Support

Cannot find tnsnames.ora error message

We are using oracle 10.2.0.1 via Toad. I get a cannot find tnsnames.ora file error message and see only a tnsnames.ora file in the sample file under the c:\ORACLE\product\10.2.0.1\NETWORK\ADMIN\ directory.
Do I need to create this file, and if so how do I do this?
Thanks in advance for your help
regards,
user12943453

Do I need to use the TNSNames Editor? No need for tnsnames.ora or SQL*net to access local DB
Can I just use direct connect and the sqlnet editor?YES!

"Cannot Find Server" Constant Error Message

I've been having this problem for quite some time. I will attempt to connect to a website only to wait forever and then get a "Cannot find server" error message. It's not just with one site, it happens with many.
It's also random. Sometimes everything connects fine and fast, and then inexplicably I get "Cant' find server" for sites like Facebook, Amazon, even Apple. It can start working again for a few minutes and then in an instant I'm getting error messages again.
However, my email always works fine.
And this is NOT a Safari problem. I also get the same trouble when I switch to Firefox or Explorer. My ISP says it's an Airport / Mac issue since it all works fine if I direct connect to the laptop and because my email is also working.
In addition, when I'm having this problem, my iPhone also cannot connect to the WWW but can get email.
I've tried powercycling the modem and the airport numerous times. It's really becoming a pain.
Any thoughts?

Me too I tried everything. I am an Apple fan with 2 computers,3 iPods. I have no idea what the problem is. I had to re-run the disk each time to find the internet. Finally tried a Linksys Grouter worked first time-laptop anywhere in the house strong signal. I have had similar problems with an Airport Express-never got it to work-so tried the Extreme. I returned it-I didn't want to but I just could not get it to work.

'Font contains bad/Widths' and 'Cannot find/create font' errors when saving pdf as Other Reduced Size PDF

I am exporting .indd files from within Indesign as pdf files, opening in Acrobat Pro XI. I have no trouble creating the initial pdf file, however, when I go to Save Other > Reduced Size PDF I get error messages. Depending on the file, I receive either the message, "The font (Myriad Pro) contains bad/Widths" replacing the text with dots or "Cannot find or create the font (Helvetica) Some characters may not print or display properly" replacing text with dots or boxes.
My confusion is that the file is exporting to pdf from Indesign without error, it is only when I try to Save Other> Reduce Size PDF that the error occurs.
Also, it is only occurring on five out of 120 pages. These same fonts are on other pages and I have no trouble at all with exporting or Reduce Size PDF.
More frustrating is that I have never had this problem occur in all my previous versions of Acrobat using the same process and typefaces.
I am reaching deadline on this and cannot find a solution other than to reload Acrobat 9 and ditch this upgrade.
Any help would be greatly appreciated.

I, too have experienced this issue. Upon export from INDD CS6, I see the error message "The font 'IXWIPX+SourceHanSansSC-Bold' contains bad \Widths."
The only items on the single-page InDesign document I'm trying to export are copies of a one-page PDF (which was extracted from a longer PDF, arranged into a cover format). I can provide all files as necessary. The longer document that the one page came from also experienced an error when I tried to print to Adobe PDF. While I still get a PDF of the cover on export, despite the "bad \widths" message, it won't print from certain machines. I get nothing (not even an empty shell file) from the attempt to print the larger document (where the cover elements came from) to PDF.
I can deal with these issues with a few unorthodox workarounds, but wanted to offer comments or volunteer to help test fixes if possible.
For the record, I'm really not enjoying Acrobat XI. It doesn't seem to have much by way of new features (at least not that I use), and some of those I used most in version X are gone or less functional. Common fonts like Times New Roman are often not found (even though they are definitely on my system); I have a much harder time editing text through the new interface, and I have a few other small gripes—some that I don't have time to get into, others that wouldn't really matter, except that they weren't a problem until I "upgraded." Just sayin'.
Thanks for listening.

Cannot find symbol class error

hi there ,
i am creating a min class that links several classes and i am doing the following
public class Main{
     public static void main(String[] args){
     classOne a = new classOne();
classTwo b = new classTwo();
classThree c = new classThree();
// more classes with the same as above
i am saving all the classes in the same folder , and i am having this error twice with each line that i creat an instance for a class
cannot find symbol
symbol : class classOne

are your classes all in the same package? do you in fact use packages?
Your best bet to get help here is by creating a Short, Self Contained, Correct (Compilable), Example or SSCCE. This is a small application that you create that is compilable and runnable, and demonstrates your error, but contains no extraneous, unnecessary code that is not associated with your problem. To see more about this and how to create this, please look at this link:
http://homepage1.nifty.com/algafield/sscce.html
Remember, this code must be compilable and runnable.
Also, if you do post your code, please use code tags so that your code will be well-formatted and readable. To do this, either highlight your code block and press the "code" button at the top above the message block or place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
   // your code block goes here
[/code]

Cannot find the path error

I am trying to run a executable through a batch file. However, the batch file is never opened when the control reaches at that point of execution. The error message is:
Cannot find the file 'c:\Program'(or one of its components). Make sure the path and the filename are correct and that all the required libraries are availableThe method where I am calling the batch file is:
public void run_Fastran(int x)
       try
           File ftn07_i = new File( "C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\ftn07_" + x) ;
           File ftn07 = new File("C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\ftn07") ;
           ftn07_i.renameTo(ftn07) ;
           String path = "";
           path = "cmd /c start C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\FCall.bat";
           Runtime rt = Runtime.getRuntime();
           Process proc = rt.exec(path);
           String nameNew = "C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\FTN04-" + x + "-" + getPathValue();//change p12 with the crack path input by user.
           File file = new File("C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\FTN04i");
           while (file.exists()==false)//until FTNO4i come into existence
           File file2 = new File(nameNew);
            // Rename file
           file.renameTo(file2);
           File ftn07Back = new File("C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\ftn07") ;
           File ftn07_iBack = new File("C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\ftn07_" + x) ;
           ftn07Back.renameTo(ftn07_iBack) ;
           File ftn07_i_del = new File("C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\ftn07_" + x) ;
           ftn07_i_del.delete() ;
       catch(Exception e)
           e.printStackTrace();
    }my batch file is created with this method:
public void writeBatch()
         try
//            File user = new File("C:\\JBoss\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail() ) ;
//            user.mkdir() ;
            BufferedWriter out = new BufferedWriter(new FileWriter("C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\FCall.bat"));
            String one = "@echo off" ;
            String two = "cd \"C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\"" ;
            String three = "\"C:\\Program Files\\jboss-4.0.5.GA\\bin\\Fastran\\" + getUserEmail()+ getSessionId() + "\\FASTRAN.EXE\"" ;
            String four = "ren FTN04 FTN04i" ;
            String five = "EXIT" ;
            String six = ":finish" ;
            out.write(one + "\n");
            out.write(two + "\n");
            out.write(three + "\n");
            out.write(four + "\n");
            out.write(five + "\n");
            out.write(six + "\n");
            out.close();
        catch (IOException e)
    }It is running fine on my computer on application server. It is only when I am trying to deploy my application on the server I am facing this problem. I hope to get some help here.

okay I can get to the batch file, but now another problem. My first command in the batch file is change directory, but for some reason it is not functioning right. To illustrate again my batch file created through writeBatch method listed above is:
@echo off
cd "C:\Program Files\jboss-4.0.5.GA\bin\Fastran\email1176823047146"
"C:\Program Files\jboss-4.0.5.GA\bin\Fastran\email176823047146\FASTRAN.EXE"
ren FTN04 FTN04i
EXIT
:finishthe change directory command is only working till bin folder ie
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
C:\Program Files\jboss-4.0.5.GA\bin>I can change the directory manually however but not through the batch file. I am at loss, need help.
Message was edited by:
NasirMunir
Message was edited by:
NasirMunir

Wrapper cannot find servlet class error

Hi all!
I'm receiving a mysterious error when I try to run my web ap. "Wrapper cannot find servlet class com.ruffalocody.report.ReportServlet or a class it depends on"
I'm running it on JBoss 3.2.7, and I have another web ap, made almost identical to this one which does not display the same error/exception.
If anyone could give me advice on what I should do to fix this, I'd very much appreciate it. :)
Full exception message:
javax.servlet.ServletException: Wrapper cannot find servlet class com.ruffalocody.report.ReportServlet or a class it depends on
     org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:66)
     org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:162)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     java.lang.Thread.run(Thread.java:534)
root cause
java.lang.ClassNotFoundException: com.ruffalocody.report.ReportServlet
     java.net.URLClassLoader$1.run(URLClassLoader.java:199)
     java.security.AccessController.doPrivileged(Native Method)
     java.net.URLClassLoader.findClass(URLClassLoader.java:187)
     java.lang.ClassLoader.loadClass(ClassLoader.java:289)
     java.lang.ClassLoader.loadClass(ClassLoader.java:235)
     org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:66)
     org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:162)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     java.lang.Thread.run(Thread.java:534)the servlet class file ReportServlet.class is located in:
WEB-INF\classes\com\ruffalocody\report
web.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
    <servlet>
        <servlet-name>RprtSrvlt</servlet-name>
        <servlet-class>com.ruffalocody.report.ReportServlet</servlet-class>
    </servlet>
    <servlet-mapping>
        <servlet-name>RprtSrvlt</servlet-name>
        <url-pattern>/reports</url-pattern>
    </servlet-mapping>
    <session-config>
        <session-timeout>
            30
        </session-timeout>
    </session-config>
    <welcome-file-list>
     <welcome-file>
            index.jsp
        </welcome-file>
    </welcome-file-list>
    
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>crystalreportviewers10</param-value>
    </context-param>
    
</web-app>It's called from the index.jsp page w/ ulr: "reports?goTo=view"
Servlet code (not sure if it's useful, but including just in case):
* ReportServlet.java
* Created on February 1, 2007, 11:04 AM
package com.ruffalocody.report;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSourceFactory2;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
import com.crystaldecisions.report.web.viewer.CrystalReportViewer;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase;
* @author aerohner
* @version
public class ReportServlet extends HttpServlet
    String rptLoc = "CR10_JRC_BeginHere.rpt";
    /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
     * @param request servlet request
     * @param response servlet response
    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
     response.setContentType("text/html;charset=UTF-8");
     String goTo = request.getParameter("goTo");
     if(goTo != null && goTo.equals("view"))
         viewReport(request, response);
     }// end goTo view
     else if(goTo != null && goTo.equals("export"))
         exportReport(request, response);
     }// end go to export
     else
         RequestDispatcher view = request.getRequestDispatcher("index.jsp");
         view.forward(request,response);
    private void viewReport(HttpServletRequest request,
         HttpServletResponse response) throws ServletException, IOException
     IReportSource rptSrc = setUpReportSource(request);
     if (rptSrc != null)
         // create viewer
         CrystalReportViewer viewer = new CrystalReportViewer();
         try
          viewer.setReportSource(rptSrc);
          forward(request, response, viewer);
         catch(ReportSDKExceptionBase e)
          e.printStackTrace();
     }// if rptsrc not null
     else
         log("rptSrc is null");
     }// end else not null
    }// end viewReport(.)
    private void exportReport(HttpServletRequest request, HttpServletResponse response)
    }// end exportReport(.)
    private IReportSource setUpReportSource(HttpServletRequest request)
     IReportSourceFactory2 rptFact = new JPEReportSourceFactory();
     IReportSource rptSrc = null;
     try
         rptSrc = (IReportSource)
          rptFact.createReportSource(rptLoc, request.getLocale());
     }// end try
     catch (Exception e)
     return rptSrc;
    }// end setUpReportSource()
    private void forward(HttpServletRequest request,
         HttpServletResponse response, Object viewer)
         throws ServletException, IOException
     request.setAttribute("viewer", viewer);
     RequestDispatcher view = request.getRequestDispatcher("viewer.jsp");
     view.forward(request,response);
    }// end forward(...)
    // <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
    /** Handles the HTTP <code>GET</code> method.
     * @param request servlet request
     * @param response servlet response
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
     processRequest(request, response);
    /** Handles the HTTP <code>POST</code> method.
     * @param request servlet request
     * @param response servlet response
    protected void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
     processRequest(request, response);
    /** Returns a short description of the servlet.
    public String getServletInfo()
     return "Short description";
    // </editor-fold>
}Thanks :)

I'm curious. Could you strip off the "java." part of the package, so both in your sourcefile as in the directory structure? It may be that the java package is not allowed, but then I wouldn't know why you didn't get a compile error...

FYI: How to Fix "iTunes Cannot Find Original File" Error

Yesterday morning, I opened iTunes and tried to play a file. I got the old "iTunes cannot find the original file" error. I tried another file. Same thing. I tried restarting iTunes, holding down the shift key, and making sure iTunes knew where my Library file was. Yep. Still no dice. So I came here, and did a search for help. I could not find any definitive answers to this question. So I did a Google search and found the fix in an old Metafilter thread. Given that this problem seems a little common, I thought I'd post my solution here, for anyone who has this issue in the future.
First things first, make sure that it's not just an issue of pointing iTunes to your current library location. Go to your advanced preferences and double-check the library location path. If this doesn't fix it, then it's time to go my route:
1) Open your iTunes folder in windows explorer. Look for a file called "itunes library.xml". Copy that file to your desktop or somewhere else so that it's backed up...in case something goes wrong.
2) Open the original XML file in notepad (right-click, "open with", "notepad").
3) In this XML file, you will see a paragraph of information for every file you have (songs, podcasts, videos, etc.). In each of those paragraphs, there is a file path specifying where the file is supposed to reside. This is how the itunes library.itl file knows where to look. In my case, it should have been "e:/my music/itunes", but instead, it was "e:/my music/itunes/itunes music". The program had created that folder for some reason, and all my files were pointing there.
4) Check a few of the paragraphs and see if they are pointing to your actual music folder. If so, then you have another problem...sorry. If not, then continue on:
5) Go to edit->replace (or control-H). In the "find what" box, enter the incorrect file path (in my case, e:/my music/itunes/itunes music"). In the "replace with" box, enter the correct path of your itunes music folder (in my case, "e:/my music/itunes". Then click "replace all".
If you have a lot of songs, this may take awhile. I have over 25,000 files, so it took at least 18 hours.
6) When it's done, quit notepad and save the XML file. Open iTunes. If it doesn't automatically start updating your library, then try to play a song. If you get the same old error, then quite iTunes, then re-open it, go to the advanced preferences and select the correct file path for the library location. This should fix it.

I am also finding many "ghost file" duplicate files (with the exclamation point "can not locate files" message), after pointing Itunes version 8.2.1.6 to my music folder on a separate, networked hard drive. My understanding is that the "Consolidate Files" feature in Itunes is supposed to properly identify all of the file locations, but it only worked for about 1/5 of our 10,000 plus files before it stopped running. (I've read in other forums that this software is buggy, and gets confused with long song titles, etc.)It also leaves you with duplicate "ghost" files to delete, when the music from the separate drive is "added".
I can not find a file called ituneslibrary.xml to try your suggestion, when I open my Itunes folder. When I do "get info" on the individual music files in Itunes that can't be located, the "where" field = "not available". I have doublechecked the library location in preferences and it is properly pointed to "K:\itunes" which is the correct location.

"Cannot find nwlocale.dll" error when running 16-bit application

Hi There,
I'm encountering the error message "Cannot find nwlocale.dll" when
activating a 16-bit application (standalone version) in a workstation
using Windows 98 and Novell Client v4.83. This only happened in a
particular workstation but other is working fine. Is there any
areas/reasons/possibilities that I can have a check?
Any information can help, please feel free to share.
Thank you very much.
Best Regards,
Shannon

On 7/21/2005 [email protected] wrote:
> using Windows 98 and Novell Client v4.83.
Incorrect Novell Client version for that OS.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

Cannot find default Portal error iView DedicationAlerter

Similar Messages

Maybe you are looking for