Cannot find device or file error when installing 6.1 from cd or from hard drive

installation error - LabVIEW 6.1 AUG 2000 - this is the only software I had a problem installing

Contact NI for support at ni.com/ask. You will need to provide extensive information about your system.

Similar Messages

"The system cannot find the path specified" error when installing a network printer running Win 7

Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Error when trying to move iTunes Media to external hard drive

I want to free up space on my laptop so I read this support file:
iTunes for Mac: Moving your iTunes Media folder: http://support.apple.com/kb/ht1449
I am following the directions for "Moving your iTunes Media folder" set-by-step. When I get to the step "choose Library and then Organize Library" I get an error that there is not enough room on the hard drive to copy the media files. I purchased a new Iomega eGo 250 GB for this. (My media files are only 20 GB and I only have 100 GB hard drive.) I also tried my Time Machine 500 GB drive with 300 GB free on it and got the same error. (I can copy the iTunes folders over to both drives manually but then iTunes does not see the files.)
Any thoughts? Thanks!

I can copy the iTunes folders over to both drives manually but then iTunes does not see the files.) Hold Option, launch iTunes, select *Choose library* then select the iTunes library folder you coped to the external.

"system cannot find the path specified" error when deploying EAR

I am trying to deploy a J2EE based web service created in Sun Studio 5 to the SunOne AS 7.0.
I get an error saying "The system cannot find the path specified". I have followed the deployment instructions as closely as possible I think.
When I look in the file system for the file the system is trying to find, the whole directory it seems to be looking for (C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1)
is missing. (In fact there is nothing in the j2ee apps directory).
Got any ideas? Have I missed something?
Thanks for any help,
Nick
WARNING ( 1616):      ADM1022:Deployment failed - Detailed Message:
     com.iplanet.ias.deployment.backend.IASDeploymentException: Deployment Error -- com.iplanet.ias.util.zip.ZipFileException: filename: C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1\PCSearchWebService_War_war\WEB-INF\classes\App\PostcodeValApp\PCSearchWebServiceGenServer\PCSearchWebServiceServantInterface_ValidateSSP_ResponseStruct_SOAPSerializer.class java.io.FileNotFoundException: C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1\PCSearchWebService_War_war\WEB-INF\classes\App\PostcodeValApp\PCSearchWebServiceGenServer\PCSearchWebServiceServantInterface_ValidateSSP_ResponseStruct_SOAPSerializer.class (The system cannot find the path specified)
     at com.iplanet.ias.deployment.backend.AppDeployer.doRequest(AppDeployer.java:58)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplicationArchiveOrDirectory(ManagedServerInstance.java:745)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplication(ManagedServerInstance.java:667)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

I found out the problem;
the auto-generated file name seems to have been too long for the app-server.
I changes the name of the class to PCWS and it worked fine.
It's a shame Sun One Studio (which creates these massive file names doesn't warn you!

Has anyone gotten a missing file error when installing 10.5 on windows 7

I have tried to install iTunes 10.5 on my windows 7 64 bit laptop and keep getting a "missing file error" but it doesn't say what file is missing and I haven't been able to find any info to help resolve the issue. Any help would be appreciated!

Ok, if you get this message I've read a bit further and found that you must uninstal everything that has something to do with apple. this includes the device driver. this link may help you with that. http://support.apple.com/kb/ht1925 Once I went through the list and deleted everything (device support is a *****). I installed it again and it came up with the same error. I then clicked ok and it rolled back but automatically started installing again and it worked. I know have itunes 10.5. but know my iphone 4 wont connect to it, lol. it says i have to reinstal because the driver didn't take or something. I really want the OS update for my phone but gd this is a bit much.

Missing file error when installing SAP Front End

When installing SAP front end, i am receiving following file missing error, please assist:
I am using Windows XP Professional
The SAP Front-End Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard.
The following program files are missing on the installation source:
c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\filc\odbc\mscreate.dir
c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotgr.gid
c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotuk.gid
The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://C:\SAPEXP1\Others\SAPGUI1\GUI\WINDOWS\WIN32\setup\saplogvw.exe .

Hi Anand,
I would not care about those files, because they are unneccessary. mscreate.dir is a 0 byte file which just tells that microsoft has created this directory. The *.gid files are winhelp files that get created when you first use the help function.
Regards,
Pascal

Mail Version 7.3 gives me this location is read-only error when I try to save messages to my hard drive even though I have full permissions to use the folders

Mail is suddenly not allowing me to save Mail messages (nor attachments) to my hard drive. Insists that the location is read-only, which it's not (I've checked and rechecked the folder permissions). I'm the only person who uses my computer. Anyone else having issues? Mail has also been quitting off and on lately; never used to crash -- ever.
System 10.9.3.

The method of resetting the Home folder preferences posted by Linc Davis might help you:
Linc Davis
Re: Reset Home Folder Permissions and ACLs not working?
This helped meRe: Reset Home Folder Permissions and ACLs not working?
Apr 30, 2014 10:06 PM (in response to plcmms)
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.

.m4v files won't play in QuickTime from hard drive

hi, downloaded tv series from iTunes (.m4v files). When I go to iTunes Media and click on one of the shows it opens QuickTime and a grey and white checkerboard screen appears and nothing else. Can stream the shows direct from iTunes but that adds to download quota and want to play the downloaded version on my hard drive using Apple TV. Thanks if you can help. Downloaded Perian and didn't help

The correct way to stream purchased content from iTunes to the AppleTV is using Home Sharing NOT Airplay mirroring which I think you are attempting here.
Enable Home Sharing in iTunes and on AppleTV (under Computers).
Provided your iTunes is running on the same LAN as AppleTV you can go to Computers and selecting TV Shows/Movies etc from there plays across the LAN not the internet.
It is the main Movies/TV Shows/Music icons that play previously downloaded content from the internet/cloud - Computers icon pulls locally stored iTunes content across the LAN not the internet.
AC

CRC missing file error when installing windows

When trying to instal windows on my Mac Pro desktop I keep getting the same error message. I must have tried it 6 times and always get the same message whether I am trying to my main disk partitioned, or to my secondary disk. It tells me to check my disk and I have, and cleaned it, plus I have ued the same disk to instal windows on my laptop Mac Pro without problems.
The message follows...
Error:
SXS.dll: syntax error in manifest or policy file "f:\i386\asms\6000\msft\windows\common\controls\controls.man" on line 4
xxx
error:
installation failed f:\i386\asms. Error message: Data error (cycle redundancy check)
xxx
fatal error:
one of the components that windows needs to continue setup could not be installed.
Data error (cycle redundancy check)
If you are installing from a CD there might be a problem with the disk; try cleaning the disk or using another disk.
Please help!
Doug

It should be "Cyclic Redundancy Check" I believe. If I were you I would check the disc for scratches...etc., and even if you can't detect any that are very visible, it would still be a good idea to go out and purchase some stuff designed for fixing scratches/blemishes on CD's so you can use them again. If that doesn't work, I'm at a loss.

Error when installing Dreamweaver CS6 from Master Collection on Mac OS 10.7.1 or 10.6.8

Full error log at <http://pastebin.com/r208XaqY>
Short error message below
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF027, DW063 ... WARNING: DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW065: Display requirements not met for {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0
----------- Payload: {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirarpAhfff/Assets1/Adobe Dreamweaver CS6.app/Contents/Resources/SharedImages/904.png" to "/Applications/ThirdParty/Adobe Dreamweaver CS6/Adobe Dreamweaver CS6.app/Contents/Resources/SharedImages/904.png" (Seq 1746)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1746)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Dreamweaver CS6_AdobeDreamweaver12en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Dreamweaver CS6: Failed due to Language Pack installation failure
I have tried installing both from a standard account and from an admin account. The same error occurs each time.

Hi Michael,
The final issue I mentioned is not with the installation but with the first launch.
My solution was to:
Open System Preferences at the Accounts pane
Click on the Lock icon in order to make changes, and enter an admin user name and password.
Select the standard user account that is to use Dreamweaver
Check the Allow User To Administer This Computer checkbox
Reboot the computer
Launch Dreamweaver from the user's account (now with admin privileges)
Dreamweaver does whatever it is that it needs admin privileges for
Repeat steps 1 to 3
Uncheck the Allow User To Administer This Computer checkbox, so that the user goes back to a standard account
Reboot the computer
Dreamweaver will now launch happily from the chosen user's standard account.
I imagine that it would not take a whole morning to fix Dreamweaver CS6 so that it throws up a "Please give me temporary Admin privileges" dialog on first launch. It might also not take that much longer to do whatever it is that it has to do on first launch in a folder where admin privileges are not required.
This would save hours of frustration on the part each of the thousands of end users who are likely to encounter these symptoms.

"Cannot log into Web service" error when tying to use Wifi to connect to Google Drive or Facebook

We have a relatively new Canon Powershot s120. Up until a few days ago, it worked just fine to connect to the Wifi and upload pictures to both Google Drive and Facebook. Now, every time I try to connect, I get a message "Cannot log into Web service"
I have already tried removing Google Drive from the Camera and re-adding it. I went into the Canon Image Gateway website and disconnected and then reconnected the service. That didn't do anything.
Would really appreciate any tips anyone has.
Thanks!

Problem sorted - there is a new set of terms and conditions which came out on the 6th August.
You have to log in under your current user name & password and agree to them and it works again. I spent a frustrating hour doiung this until I found out that this had happened!

Find My Friends - Server Error when logging in

I have been using Find My Friends on my iPad4 and iPhone5 for about a month but now I am getting either an error suggesting my Apple ID password is wrong, which it isn't or I wouldn't get to post on here - plus I have checked via appleid web portal.
Currently it says "Find My Friends Alert - Find My Friends is unavailable due to a server error."
However, my friends are logged into their iPads and iPhones using the service without a problem.
Any ideas?

Solving Find my Friends Alert "Find my Friends is unavailable due to a server error, is actually caused by how you have logged onto Apple - I have found.
This seems to be a common thread that stems from before Apple introduced email. At that time I first created an Apple identity for the 3GS, it was using the email address I already had. On subsequent iPhone hardware and software upgrades that introduced Apple based email, like @me.com and latterly iCloud, logging onto an updated software version you are invited to use the Apple based identities which you invariably do. This can be a mistake as original Apps are linked to the core identity based on the original one that first set up, and unless this is used then some Apps like Find Friends give misleading error messages like Cannot find Server, or Server error, when the problem is how you have logged on.
Merging those multiple identities would be a solution, but one that I haven't yet found.

Unreadable Files Error when Importing

Hi - I get an "unreadable files" error when trying to import from my iPhoto Library folder. I've read the other postings, and it sounds as though I should not have moved files directly into this folder. If that's the case, can someone please tell me how to move iPhoto Library files from an external HD onto my computers HD so that I can access the files in iPhoto? What I did was move pictures from my external HD "Pictures,iPhoto Libray, Originals" into the the same folder on my computer's HD - Thanks for any help you can provide!

misstexas:
Welcome to the Apple Discussions.
import from my iPhoto Library folder
That's the reason. iPhoto will not import any file that resides anywhere inside the iPhoto Library folder. Move them to the Desktop and import from there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to install arch 2009.08 from hard drive? Please enlighten me

OK, I admit I am impatient for the installation from the CD drive. Whenever possible and whatever distro I wanna try, I head first to try to install it from the hard drive. I don't remember how many times and how many distros I have done the same to, ubuntu, zenwalk, sidux, fedora, opensuse and of course arch. It rarely failed as long as I followed someone's guide, sth like "install any OS from hard drive", I do not exactly remember. And I did the same in the past with arch. But after 2009.08, it simply didn't work. I've read the article "fast install arch from existing linux system" in the wiki, it didn't work either (by the way, if someone can solve my problem, I think the article should be updated). After it boots, at some stage, it says "Use Hook [archiso]", then tell me "waiting for /dev/archiso for 30 seconds ..." then when the time due, it throws me into a ramfs shell. I've hacked for a long time, but no luck. Then I went back to download the 2009.02 iso, however, it works flawlessly.
I did find some differences in the menu.lst/isolinux.cfg between two version.
In 2009.02, we have
title Boot Arch Linux Live CD
kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 usbdelay=5 ramdisk_size=75%
initrd /boot/archiso_pata.img
While in 2009.08, it is
title Boot Arch Linux Live CD
kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_AHCOHH6O ramdisk_size=75%
initrd /boot/archiso_pata.img
I know I can install arch from usb, but I simply wanna know what's wrong here, so guys, if you have any idea, don't hesitate to enlighten me.

Hi, vacant, thanks for the reply. I did not notice you are the author of the article. Actually I missed the head of the article which directs me to another (the amalgamated one you mentioned). I take a look at it, it seems to make things complicated. I still miss the old days: you simply download the iso, mount it and copy all the contents into a separate partition, edit your current grub, then reboot and everything works. I don't understand how Arch could be so evolved to exclude this simple installation scheme. I am not complaining the development of Arch. In my opinion, a distro as flexible as Arch should provide as much installation strategy as possible. In this respect, I think we can learn from Ubuntu or sidux (in sidux, it provides a very convenient kernel parameter called "fromiso" which allows you to install sidux from the plain iso, that means, you even don't have to mount it and copy the contents out of it to a separate partition).
Last edited by plmday (2009-10-25 06:25:44)

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

If it is the first CS version then you will need to check out the following. I believe it applies to CS as well even though it specifies CS2....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Cannot find device or file error when installing 6.1 from cd or from hard drive

Similar Messages

Maybe you are looking for