Cannot find Display in the Others list
I am at step 5 of the tutorial and Display is not shown in the Others list only Visability
Display is in the Layout section. It has moved slightly since the video was recorded.
Similar Messages
-
Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.” Who can help me solve this problem?
Thank you in advance for your time.
MarlenHello Anubha,
I am having a similar problem on my machine. I was using Word 2008 and I created a PDF inside Word.
I am opening the file on the system itself and I am running Windows 8.1. I am using Version 11 of Reader.
When the PDF I created (my resume) attempts to open, it says: cannot find or create the file Times, Bold. Some characters may not display or print correctly.
However, the entire Reader keeps freezing and will not allow me to open or test print the document. Also, it is not displaying any of the Bold Times New Roman Print. Can you please help? Thanks. -
With the lookup technique, it is possible to select an item from another list and display one column of this item
It is obviously possible to create several lookup columns on the same list and therefore display several columns
There’s a high risk of not selecting the same item and therefore have inconsistent columns
The Requirement therefore consist of being able of displaying several columns of the same item from the other list, based on one unique selection
Example:
In list(x), define lookup column on list (y), column Title (possible today)
Then define a “secondary” lookup column on same list, column Code
The effect would be that when selecting an item from list (X), both Title and Code would show up consistently in 2 different columns of list (Y)
All possible solutions are welcomedIf you are using SharePoint 2010, you can retrieve additional columns when adding a Lookup. If you are using 2007, there is no direct OOTB way, but the following two posts provide potential work-arounds:
https://www.definitivelogic.com/blog/microsoft-sharepoint-2007-pulling-column-data-one-list-another-based-common-list-field
http://stefan-stanev-sharepoint-blog.blogspot.com/2010/11/sharepoint-2007-associated-lookup.html
Dimitri Ayrapetov (MCSE: SharePoint) -
i lost a .docx word file , then i found it as a .asd file in the office recovery folder , but i cannot save it as a docx, when i save as a docx file or any other format i cannot find it in the destination folder
No, I already tried looking at that. The file that recovered was not in the trash, it appeared in my documents folder. I opened it up and inside was an iText Express document with coding. Then inside of there, was and then and this "SoftwareMap" document contained a bunch of coding and symbols and words.
-
Outlook 2013: Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable
When I configure the Outlook profile manually then receive warning "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable" when clicking "Automatic Replies (Out of Office)".
However if I use Autodiscover to configure the Outlook profile the above does not occur and "Automatic Replies (Out of Office)" works fine.
Client: Outlook 2013 Click-to-Run version 15.0.4551.1011 on Windows 7 Pro SP1.
Server: Exchange 2007 SP3 on Windows SBS 2008 SP2.Hi,
First of all, please make sure you have installed this Outlook 2013 hotfix package (December 10, 2013):
http://support.microsoft.com/kb/2825652/en-us
It may fix the issue.
If the hotfix doesn't help, please note, this problem can occur after your primary SMTP address changes. The problem occurs because your previous primary SMTP address is cached in the Windows registry under your Outlook profile and this information does
not get refreshed for 24-48 hours after the SMTP address change.
So please make sure you have configured smtp address correctly, or, we can find some workarounds from the link below:
http://support.microsoft.com/kb/2693800/en-us
Regards,
Melon Chen
TechNet Community Support -
One of our users is having problems setting replies from Outlook on his local PC. This is an SBS 2008 Server with Exchange 2007. The client PC is running Windows 8 with Outlook 2013. This issue doesn't seem to affect other users but this
is the only client with Outlook 2013.
When trying to set an automatic reply from within Outlook 2013 we get the "Your automatic reply settings cannot be displayed because the server is unavailable". Outlook seems to be connecting and working fine so connection to the server does
exist.
Trying this same operation from owa works without issue. Please let me know what we need to do to find a solution.
Thanks so much!Problem:
IMAP downloads inbox don't work after November patches.
If you install a fresh OS and O2K13 unpatched ,the IMAP works fine.
Fully patched O2K10 works fine too.
It worked for my customer until November patch Tuesday broke the IMAP sync.
Consultant opened case.
Response from Microsoft:
This is with regards to the issue faced by you due to regression caused by November security update. This is further to inform you
that fix is out and below is the download links for 32 bit and 64 bit of the office suites. You need to apply all 3 hotfix. The crash issue and IMAP issue would get resolved
immediately while the issue related to Free / Busy and OOF not getting set would take 24-36 hours to start working once the patch is
applied.
Below
are the KB articles:
Description
of the Outlook 2013 hotfix package (Outlook-x-none.msp): December 10, 2013:
http://support.microsoft.com/kb/2825652
Description
of the Word 2013 hotfix package (Word-x-none.msp): December 10, 2013:
http://support.microsoft.com/kb/2837674
Description
of the Office 2013 hotfix package ( 2013:
http://support.microsoft.com/kb/2849994
Description of the Office 2013 hotfix package ( December 10, 2013:
http://support.microsoft.com/kb/2849994
Issues that this hotfix package fixes
Consider the following scenario:
You have a SharePoint Server environment that has complex workflows.
You implement the ReceiveTimeOut registry entry to increase the global timeout to 90 seconds.
You click Open this task button to open a workflow task in Outlook 2013.
In this scenario, when you click any approval option from the popup dialog box, you receive the following error message:
This task could not be updated at this time.
When you reply or forward an email message by using inline replies, you cannot use the Close and Delete method of Outlook Visual Basic for Application. Additionally, you
receive the following error message:
Run-time error '-2147467259 (80004005)': This method can't be used with an inline response mail
item.
Consider the following scenario:
Assume that User A is located on an on-premises Exchange Server, and User B is located on Cloud.
Both the on-premises Exchange Server and the Cloud enables the Federation Trust.
User A share his own calendar to User B with Full Details permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click Open this Calendar, Outlook browses to the Calendar module and opens
the shared calendar.
In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached Exchange Mode for new and Existing Outlook Profiles Group Policy settings and enable it.
In this scenario, when you open the Outlook Account Settings window, and double-click the Exchange
account, the Use Cached Exchange Mode check box is not checked in the popup dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security Settings folder under
All Public Folders.
You publish the AdminSecurityMode registry entry and set to a value of 1.
You configure Outlook 2013 to use cached mode.
In this scenario, when Outlook 2013 connects to Exchange Server, Outlook crashes.
Description of the Word 2013 hotfix package (Word-x-none.msp): December 10, 2013:
http://support.microsoft.com/kb/2837674
Assume that you open a meeting request in a separate window in Outlook 2013. When you click
Accept and then click
Send Reply Now, Outlook crashes.
Description of the Outlook 2013 hotfix package (Outlook-x-none.msp): December 10, 2013:
http://support.microsoft.com/kb/2825652
Issues that this hotfix package fixes
Assume that you have a recurring appointment that does not have a subject. You make some changes to one instance of the appointment and then save the instance. When you
try to open or delete the instance, Outlook may crash. Additionally, when you drag-and-drop one instance of the appointment to a different
time in the calendar, Outlook may crash.
When you reply or forward an email message by using inline replies, you cannot use the Close and Delete method of Outlook Visual Basic for Application. Additionally, you
receive the following error message:
Run-time error '-2147467259 (80004005)': This method can't be used with an inline response mail
item.
Consider the following scenario:
Assume that User A has a mailbox that is located on an on-premises Exchange Server, and User B has a mailbox that is located
on Cloud.
Both the on-premises Exchange Server and the Cloud enable the federation trust.
User A share his own calendar to User B with Full Details permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click Open this Calendar, Outlook browses to the Calendar module and opens
the shared calendar.
In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached Exchange Mode for new and Existing Outlook Profiles Group Policy
settings and enable it.
In this scenario, when you open the Outlook Account Settings window, and double-click the Exchange
account, the Use Cached Exchange Mode check box is not checked in the popup dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security Settings folder under
All Public Folders.
You publish the AdminSecurityMode
registry entry and set to a value of 1.
You configure Outlook 2013 to use cached mode.
In this scenario, when Outlook 2013 connects to Exchange Server, Outlook crashes.
Consider the following scenario:
You have two Active Directory forests (Forest A and Forest B).
User A and User B have their mailboxes that are located on Forest A.
User A share his own calendar with User B with Full Details permission.
User B add the shared calendar and let it sync.
You move User B’s mailbox to Forest B.
In this scenario, the shared data in the shared calendar is removed every second time that User A restarts Outlook. And it is re-synced
when User A browses to the Calendar module.
Unfortunately TechNet isn't coming back, sorry folks :-(
The 3 patches above immediately fixed the issue for me!
Thanks so much! -
Ipod classic has been wiped saying 'no music'etc.
Cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again. Ocassionally Itunes freezes when I plug in the Ipod.Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug.
A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
B-rock -
i downloaded acdsee camera flash (us$0.99) in Hong Kong's app store, but i cannot find it in the app store after i changed to another iphone. it seems that the app is no longer available in HK, how can I get back the app?
First make sure you are searching the name correctly.
If the app is no longer in the App Store it is no longer available for download. This happens when Apple has found the app violates the agreement with the developer or when the developer no longer wants the app listed in the App Store.
If the app is truly no longer in the App Store your only option is to copy it from iTunes on the computer you normall sync with. -
Acrobat 8.1.2 Pro: Cannot find or create the font 'Arial'.
I have two workstations both running Acrobat 8.1.2 Pro, both have the font Arial installed and working just fine in other applications.
I have a pdf file from a customer which opens fine in one workstation, the other workstation gives the following error and shows all text in the pdf as "dots".
Cannot find or create the font 'Arial'. Some characters may not display or print correctly.
I've Googled "Cannot find or create the font" and find this problem has been reported in Adobe forums and elsewhere in several previous versions of Adobe Acrobat. Nowhere is the problem resolved... most responses suggest the font Arial is not installed which is not helpful as the Arial font is indeed working fine in other applications.
Windows XP/ Adobe CS3 / Adobe 8.1.2 Professional
Thanks,
SCI am having the same problem Sam is. I only see dots in my document and received the same error mesage only I was using a different font. The font is installed on y system and usable in other documents.
I tried to change the font (dots) to a different font but received an error messge stating the change could not be done because the "chosen font and the font encodings in the document differ and could not be resolved"
Please help!
Thanks so much! -
This item cannot be displayed in the reading pane
Hello all. I've bene scowering the net trying to find a solution to this problem for over a month now and every solution I have found doesn't work. Here's the low down.
It only happens on this client and not other outlook clients. Meaning the same person could open his email on another system and the views are fine. OWA is also fine. I'm pretty confident its not Exchange but Outlook on this system. I get
two messages.
When receiving emails from a specific address that sends emails with audio attachements (shoretel's voicemail to email) the user gets "this item cannot be displayed in the reading pane" There is no active content in these emails. They are plain
text. Next, when he sends a meeting invite to a specific person or receives an email from a specific person he gets "This item contains active content that cannot be displayed in the Reading Pane". Here's what I've done so far.
I've deleted and reinstalled Outlook 2010 (pro plus)
I've deleted his profile and rebuilt it. I've deleted the profile from the registry and reinstalled outlook 2010.
I've disabled all pluggins.
I've cleared the forms cache and made sure the forms view matches someones that's working.
and of course, rebooted. I've found fixes for different versions of outlook but nothing I have found has worked. Short of backing up to PST, nuking his mailbox, rebuilding it, and importing the PST i'm at a loss. I don't think I need to
get that drastic if on another machine and on OWA it works fine. Anyone have a clue as to what I could try?Hi This is what worked for me:
Just to clarify in my case, any email that had a form attached, when I tried to open it, the actual email body was just blank.
I also realised I couldn't create new forms, I could see all the preloaded ones but couldn't open.
So this is the advise I followed:
Clearing the forms cache
The first thing you should try is clearing the forms cache. This will make sure that, in the case of using a custom form, the latest published version of your custom forms gets loaded again. In the case that you just uninstalled an application that was using
a custom form, it will purge this cached form and Outlook will try to load the original message form.
To clear the cache;
Outlook 2007 and previous
Tools-> Options…-> tab Other-> button Advanced Options…-> button Custom Forms…-> button Manage Forms…-> button Clear Cache
Outlook 2010 and Outlook 2013
File-> section Options-> section Advanced-> group Developers-> button Custom Forms…-> button Manage Forms…-> button Clear Cache
It worked when I went back to previous email the attachment looked like it had gone, double clicked and it took a while to open as it needed to load new forms.
Do this before rebuilding or deleting a mailbox. Also try SP2 if need be. -
Error: Cannot find or create the font '0, Bold'...
I get this error when I try to open a .pdf file that someone sent to me. "Cannot find or create the font '0, Bold'. Some characters may not display or print correctly."
I use gmail and can view the file but as soon as I save it or try to print it and adobe reader opens the file I can't see the any of the letters just lines of dots where the text is supposed to be.
I did a quick search to see if there was already something in the forums or on the web but didn't find anything right away. I would like to print the file so any help would be much appreciated. Thanks.Sounds like the file is corrupt. Try contacting the file's creator.
-
I need to get a refund on an audio book I bought from itunes but I cannot find it on my purchased list on my account. Where do I do this?
If you downloaded it on your Mac's iTunes then it should be in the Books part of your library (Audiobooks if you are using OS X Mavericks), if on an iOS device then it should be in the device's Music app.
By 'purchased list' you mean yoru purchase history or the Purchased link for redownloading ? If the latter then audiobooks are a one-time only download from the store so they won't show in Purchased for redownloading, you need to copy or sync it to the computers or iOS devices that you want it on. -
Cannot find any of the links under menu
Hi guys,
I made a installation of PT8.51 on Oracle11gR2 on Win2k8R2 64-bit.All scripts ran successfully.Everything went fine.Iam using 2 machines i.e. one as an application server and other as an database server.I configured the application server and booted it.I configured the PIA and i logged into it but to my surprise i cannot find any of the links or anything under the menu.Why is it.Do i have to run any scripts to grant the user PS some permission to access the menu or what??Pls help me.Do i have to make any further configuration on any of the servers?Thank you for your reply.No nic i have not managed for an upgrade.Is there any other way to check that i have got everything in my PIA.I doubt it may be something like the PS user is not granted the security to access any of the links.PLs advise what to do?
-
Hi,
We recently introduced a Exchange 2010 server into our Exchange 2003 enviroment but had to stop migrating users over to it after it became appartent that users using Outlook 2010 could not switch on their Out Of Office, getting an "Your automatic reply settings
cannot be displayed because the server is currently unavailable" error. However users on the new 2010 can set OOF if they use OWA or Outlook 2003!
Running the Test E-mail AutoConfiguration shows no errors with the Log tab showing Autodiscover succeeded and the Results tab showing all the correct values, including a OOF URL of
/Autodiscover/Autodiscover.xml">https://<servername>/Autodiscover/Autodiscover.xml into IE gives a XML file with a 600 error code.
I have looked at loads of 'solutions' on the Internet but cannot get this working, anyone have any suggestions?
Thank you,
CraigPlease verify IIS
settings:
======================
On Exchange CAS
server, open IIS console,
Go to default web site, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click Autodiscover, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click EWS, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click OAB, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Please run IISRESET command to load the changes.
Thanks.
Tony Chen
TechNet Community Support -
Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP
Maybe you are looking for
-
Nokia 500 belle updates please?
if i was not mistaken, symbian anna or should we say symbian ^3 phones should be able to get belle updates on q4 of 2011 but it was postponed and was moved on q1 2012 which is january to be specific, with great courage ang faith to nokia, we users wa
-
Makepkg fails when attempting patch addition 2.6.15-ck1
The PKGBUILD for this activity: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++# $Id: PKGBUILD,v 1.77 2005/12/27 14:47:51 tpowa Exp $ # Maintainer: judd <[email protected]> pkgname=kernel26 basekernel=2.6.14 pkgver=2.6.14.5 pkgrel=1 p
-
Anyone know how to put your ripped music back into iTunes from your iPhone? I tried syncing but it gives a warning saying are you sure you want to erase your media or something to that effect.I'm afraid to do anything now and it happened right after
-
JFileChooser and linux fakeroot
Hi, I writed a simple java test code to "show" the lock that occurs when using JFileChooser with fakeroot. If you launch this test program "noramlly" with "java Test" command, it works. If you launch this test program into fakeroot environmente with
-
Help with restoring from a back up
I've had my iPhone4 for about 4 months now, needless to say have tons of pictures on there, but no music on the iPod. Is there a way to transfer my old iPhone data onto my new one without losing the data on my new iPhone? Any answers would be greatl