Cannot find driver to Xerox Phaser 3210

Hello,
I have "strange" Xerox Phaser 3210 since 2002. This is usual PCL6 compatible
Xerox laser printer which is recognized by iMac. Unfortunately, no driver for this printer is selected If I try to install some driver for Postscripts printer - Postscript source text is printed (as I can suggest - this printer does not support Postscript at all). If I try to install some Gutenprint driver - printer doesn't respond at all.
What is worse - there are no mention about Phaser 3210 on the Xerox' site. I suspect this is modification for the Russian market only. But there no drivers for Mac on www.xerox.ru as well.
The question is: what should I do to find appropriate driver for my printer?

Xerox bought (at least) the phaser series from Tektronix a few years ago.
If I recall correctly, the xerox support site is split - you have to choose between xerox or tektronix.
On the US site, I can't find any mac drivers for that printer.
Just Windows drivers
http://www.support.xerox.com/go/results.asp?Xlang=en_ZA&XCntry=ZAF&prodID=3210&r ipId=&Xtype=download
There is also this notice:
This product is not available in all regions. Support is not available through the Xerox.com website or other corporate support organizations. See Contact Us for local contacts in your region that may support this product.
this may also help:
http://www.openprinting.org/showprinter.cgi?recnum=Xerox-Phaser3210

Similar Messages

  • Problem with finding driver for Xerox Phaser 3117 laser printer.

    Hello!
    I have trouble with finding appropriate driver for my Xerox Pahser 3111 printer. There is no support for iOS on their official support website.
    Thank you for your help.

    Hello there, AnnaVod.
    The following Knowledge Base article provides some helpful pointers for troubleshooting AirPrint on your iOS device:
    About AirPrint
    http://support.apple.com/kb/ht4356
    For best results
    Make sure your software is up to date. For iOS, verify that your device is using the latest version of iOS available and that the app you're printing from is up to date. For OS X, Use Software Update to update OS X and apps you've purchased from the Mac App Store.
    To use your AirPrint printer with Wi-Fi, the printer must be connected to the same Wi-Fi network as your iOS device or Mac, either through bridging, or a direct connection to your Wi-Fi network.
    AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
    Make sure that your AirPrint printer is connected to your network before attempting to print. Some AirPrint printers can take several minutes to join a network after being turned on.
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Important: Printers not listed in this article are not supported by AirPrint. To search for an AirPrint printer model, use the Find feature of your web browser (usually Command-F) to search the list below.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • What does it mean if the system "cannot find driver for console framebuffer"?

    I've just installed Solaris 7 on a SparcStation 20 with 256 MB RAM, 1 + 2 GB hard drives, 1xSuperSparcII. When I boot up it says "NOTICE:Cannot find driver for console framebuffer". I can't run the CDE, and I assume this is because there is no graphics driver. The graphics card (it's an add-on but by Sun) presumably needs a driver and I would have thought that this would have been included with the Solaris 7 CD. The whole thing worked fine when it was running Solaris 2.5.1 and now I've installed a new OS (initial as opposed to upgrade) it just don't work. Any ideas?

    The "output-device" parameter may not be set properly in Open Boot Prom(OBP) and hence during installation, the driver may not be installed. To fix this, try the following steps.
    1. Note down the current value for output-device. This value is to be restored later.
    printenv output-device
    2. Set the "output-device" parameter to "screen" in OBP
    setenv output-device screen
    3. Perform a reconfiguration boot using the command "boot -r"
    4. The error will not appear. Verify that /dev/fb refers to a device link.
    5. Go to ok prompt again and restore the output-device to its original value (as noted in step 1). The reason for doing this is that some resolution parameters would have been set earlier for your output-device.
    6. Reboot the system again. The error may appear again but since the device link is already created, the CDE will work.
    Please contact us if there are any issues.
    Thanks
    Srinivasan

  • Trouble with Element 7- it cannot find drive to burn cd

    I have Element 7, when trying to burn cd ( sharing ) it cannot find the drive ( E ) windows can see it but not photoshop. How do select the drive or input the drive to elements

    Which version of Windows?
    See if this Adobe troubleshooting document helps:
    http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
    Ken

  • Pocket Mac Won't Sync, and Cannot Find Driver Update Download

    Hello I am having the error 1 skipping message problem, in which my BB Curve 8330 does not sync with my mac powerbook g4. I downloaded that latest version of pocketmac (which the BB website no longer offers for download) but I cannot find the driver update. Does anyone know where that driver update is?
    Any help would be greatly appreciated.
    Thanks
    Jared

    Hi,
    PocketMac for BlackBerry should still be available for download from:
    http://na.blackberry.com/eng/services/desktop/mac.jsp
    What website are you using to download?
    Have a great day!
    Anne M.
    PocketMac Team
    Direct support available for PocketMac for BlackBerry FREE at http://tinyurl.com/RIMsupport

  • My Windows 2000 PC cannot find driver to "install" new Ipod..

    I have Windows 2000 on my PC..I installed Service Pack 4 (required for it to work in Win 2K)..when I plug in the new (just bought it today) 30 GB Ipod (after of course installing ITunes, etc)..my PC cannot find any drivers for it..I tried having it search the enclosed CD....& every other option...Can anyone help?..(I still use the older USB version on this PC....it, the USB port "see's" it..(the USB port work's) ..but it say's there's no drivers to be found)..What is the problem?..Anyone else have this problem??..Thanks in advance for the help..& I'm looking forward to participating in these discussions!....

    No..in Control panel it's a "Virtual Clone Drive"..When I first plug-in the iPod..It say's New Hardware Found..searching for drivers..none are found...In iTunes..if you try to Export any tunes..it just show's as a Virtual Clone Drive...It need's a driver for it...

  • I am trying to setup my Canon DR-4010C scanner to my office Mac's and cannot find driver software any ideas?

    I have multiple i Macs and MacBooks using Lion OX.  I.T. tells me that the Cannon DR-4010C is not compatible with Mac's, I find that hard to believe it can't be done.
    Help!

    Your IT department is correct. Canon never released scanner drivers for Mac OS X for this model. And before someone chips in and says to use Vuescan or SANE, these will not work either.
    So, if you must use the Mac's, then your only option would be to install Windows XP, Vista or 7 in a VM or Bootcamp on the Mac.

  • Officejet Pro 6830 cannot find driver

    I have a x64 E-All-in-one printer I'm trying to install on a remote desktop server. What driver can I use? I am also trying to install on a Windows  Server 2003 R2 Service Pack 2 and the driver on HP's site doesn't work.
    Any suggestions?
    Thanks
    Kimberly

    Hi Kimberly,
    While the same drivers being used, those should be installed on a server using the command line and not through a standard graphical installation.
    Follow these guidelines to install the printer on a server:
    http://support.hp.com/us-en/product/HP-Officejet-Pro-6830-e-All-in-One-Printer-series/5390307/model/...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Where do I find driver software for Windows 7 for HP Deskjet Ink Advantage 1515 Printer

    I have a new HP Deskjet Ink Advantage 1515 Printer.  When installing it Windows 7 keeps saying unable to
    install Deskjet 1510 as windows cannot find driver software.  Where can I find it.  I have the Disc and tried
    going online to no success.  Anybody help.

    Hello ALIBEE53, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues finding the printer software.  I would love to help!
    I would recommend downloading and running the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Xerox Phaser 6100 printer in Mountain Lion?

    My migration from old hardware and OS 10.4 is almost complete but I have found no way to drive my Xerox Phaser 6100 printer.  Xerox recently (belatedly!) released a long list of Mountain Lion compatible drivers which were included in the latest system update.  However, although there were multiple Phaser 61XX drivers, 6100 was not one of them.
    I really hate to scrap this useful machine.  Any ideas?

    The latest Mountain Lion driver support begins with the Phaser 6130N. Tough break on the Phaser 6100.
    Xerox has a page with links by operating system to PDF files containing all US Xerox printers compatible with the specific OS. There is a Mountain Lion link there.
    If instead, you are wondering what supported non-Xerox printer to buy, look at the manufacturer specific driver updates on apple/support/downloads. Click the name of the driver update, rather than download it. You will see a link to a kb article that lists all currently supported printer models. For that manufacturer and other vendors.

  • I downloaded an Adobe file from my email but cannot find it on my hard drive or in recycle bin - it's in downloads but am unable to open from downloads - how can I recover the file?

    I downloaded an Adobe file from my email (service provider is MWeb) but now cannot find it on my hard drive and it's not in the recycle bin. It does, however, appear in Firefox downloads but I'm unable to open it from there. How can I recover the file?

    Thanks Rob.
    I actually had no clue what the core problem was caused by. So it's Windows itself...that helps some.
    I'll resubmit there. It might actually have saved time for it to simply have been moved to there instead of off-topic, though I suppose you have to follow protocol.

  • I cannot find videos (not movies) that i have transferred to my macbook pro from an external hard drive, these files used to be on my windows PC!

    I cannot find videos (not movies) that i have transferred to my macbook pro from an external hard drive, these files used to be on my windows PC. Photos and a few of the videos came over but i am missing the majority of the videos. Help please!!! I have tried omnidisksweeper with no success in finding them.
    in my Usage it says i have over 40 gb of movies when i only have about 9gb which i can see using spotlight search. i really hope the other amount is my missing videos! these are videos of my kids as babies.

    Read this post and do the migration again, putting the library in a portable shape first if necessary.
    tt2

  • I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

  • HT201302 pc with Vista cannot find device driver software for 3GS

    Windows Explorer cannot the iPhone.  iTunes sees the 3GS, the memory alloted to pictures, but does not show over 1500 pics.  iTunes only recognizes pics in files on PC.  There are under 50 in the files.
    When I plug in the iPhone, it searches for the device driver, but cannot find one. 
    The iPhone is appearing in Control Panel / Auto Play.  Changing this setting makes no difference.
    The iPhone also shows up in Control Panel / Device Manager as a Portable Device referred to as a Digital Still Camera, it has a yellow yield icon on it.  It says it has the correct driver. Also, below the camera listing is 5 other devices.  They are all the same listing of "Microsoft WPD FileSystem Volume Driver", they all have a yellow yield icon on them.
    I have deleted all the portable devices and rebooted. They come back, however I have the same problem.
    If have tried a number of things, if I recall I saw "Code 10" at one pont.  I do not remember the item it was attached to.  I will follow-up with more info as I can get.  I have had a 3GS for over 2 years.  Apple Care tried to help me very diligently on an other Vista machine and had no success.  Please Help, someone.
    Q

    Well its surprising to know that! But even  have an ipod shuffle 3rd gen n dint face any problem like that. FYI no cd comes with the ipod jus take ur ipod to an apple exoert n he will solve ur problem .

  • Windows 8 driver cannot find HP Officejet Pro L7590 ethernet printer on my new router

    I'm changing to a new router and had to change the IP address of my ethernet Officejet Pro L7590 from fixed assigned 192.168.1.7 into fixed assigned 192.168.2.168 (my new provider provided router doesn't support the 192.168.1.xx range). At installation my PC Driver cannot find my HP Officejet Pro L7590 ethernet printer, both not by it's search function, nor by giving the specific new IP address.  Browsing and login into the printer by adressing the new Static IP address works however fine: de printer is well attached. What do I wrong with at PC driver installation, any suggestions to have the printer coupled to the PC driver?
    Update: Connecting the printer directly to the router instead of via a switch solved  the problem!

    The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
    Just trying to help.
    Andrew

Maybe you are looking for