Cannot find FindById..My old script cannot work anymore in SAP new version.

Dear Experts,
I have upgraded my SAP to a new version but I cannot use script that I wrote in the past with this version.
I tried to use record and playback. It works but with different code. It seems that it is using a different kind of code that is not similar to FindById at all.
Moreover, I cannot call Development Tool, Professor Dumbledor, any more.
Is there anything I have to change to activate Developmento tool and change back to FindById code option?
Thank you very much for your help.
Jackijacky

Hi Jackijacky,
It could be that it has something to do with WAN mode.
You can check the adjustment. :SAPLOGON --> PROPERTIES --> ADVANCED
Regards,
ScriptMan

Similar Messages

Due to slow internet connection, I cannot update my iphoe to new version 5. Is there any shortcut

Due to slow internet connection, I cannot update my iphoe to new version 5. Is there any shortcut where I can update my iphone to new version quickly

If your computer's connection is slow then you can update your iOS from your phone.
Find a free, strong Wi-Fi network.
Go to Settings>General>Software Update>choose option "Download and Install"
Benefit: if you update phone through this method the actual download size will be only 30 to 50 MB only! and it works fine! if you try to download iOS from iTunes it will goes around 800MB.

I am registered for adobe premiere elements ver 3 . .Any body know where I can find it to down load ? Or is there a newer version that I can download that my serial number will work with ?

I am registered for adobe premiere elements ver 3 . .Any body know where I can find it to down load ? Or is there a newer version that I can download that my serial number will work with ?

There is no download available for version 3 that I am aware of - version 9 is the oldest available offered by Adobe. Serial numbers are only valid for the version they were purchased for.

New computer with lightroom 5.7 installed old computer has 3.6 installed.The new version has a conflict when trying to read the external harddrives.Old sees it as drive (I) but new sees it as drive(E).When I try to rename external drive it comes up as LaC

New computer with lightroom 5.7 installed old computer has 3.6 installed.The new version has a conflict when trying to read the external harddrives.Old sees it as drive (I) but new sees it as drive(E).When I try to rename external drive it comes up as LaCie (E) (I) so I cannot get it to change the name for lightroom to read it with all the previous edits-please help all advice appreciated.

lotta stuff going on. I'm in the office now and don't expect a client for about 45 minutes. Want to walk thru this via skype or ichat? email me directly if you do. [email protected]
If not, post back and I'll try and walk thru these things.
Also, if you want to email me the project, I'll see if I can open it here.

The new version of firefox does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs

TS1538 After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any a

After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any advice?

I have the same problem. Running Win 8 64Bit, updated to latest ITunes and now will not recognize phone or pad. Followed all advice from Apple (uninstall/restart/re-install, all in exact order) ... nothing. Spoke with Apple tech and walked through the whole process, but no resolution. Tech was trying to be helpful but has no way of addressing issue.

The Ni Update service does't work, it needs a new version but can't download it.

1-When I start VISAIC.exe in Windows 7, the following error appears: Run Time error R60360 -CRT not initialized.
2-The Ni Update service in MAX does't work, it needs a new version but can't download it.
What can I do ?
Thanks in advance

Hi,
Take a look at this page:
Where Can I Download the Latest Version of Measurement & Automation Explorer (MAX)?
Regards,
Ludovic R.

My parallel port cannot work on win2000 and new pc

I was troubled by the reading/writing from parallel port on win2000 for a long time. I had made my programs work on win2000/OLD PC, but i failed with the same programs on win2000/new PC. I tried with the method from the forum, that is, install accessHW and other method from my colleagues. Allways failed. I have to return to an old pc, it work! I think not only win2000/winxp will influence parallel port work, but also pc hardware. My new PC is Dell's GX260SMT with p4 2.4G. Dell's FAE told me that i can not install win98 on the pc due to some limitation of mainboard. Who met the smae issue as mine? How to fix it? Thanks for any help.

I typically stay away from Dell PC's. I always have problems with them..
I'm surprised to read that a new PC doesn't support Win-98. Have you / can you try Win-NT 4?
I can't understand why Win2K would be different with a newer PC. The OS assigns the base address of the parallel port to a typical value of 0378h. This is for LPT1.
My question would be: Are you having problems with LPT1 or do you have a PCI-based Parallel Port (to add ports)? If so, you cannot change the base address with Win-2K or Win-XP which assigns a PCI base address to the port.
Can you provide more details as what exactly changes between the 2 PC's. Other than the motherboard and typical hardware (of course).
How is the parallel port configured?
What are you doing
with it, etc?
Any information that can help figure out a solution.
Regards,
JLV

I cannot download itunes says a newer version of quiktime is installed

i cannot download itunes. keep geting error message. a new version of quiktime is installed. ive workd on this for hours. help a brother out. plz

a new version of quiktime is installed.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

"itunes library cannot be read; created by newer version of itunes" message

My son clicked a message when he was downloading something the other day (he can't remember exactly what it said), but since doing so, if we try to open itunes we get the message: "the file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes."
When he was using it at that time, he synced his iPod and lost everything he had purchased, both games and songs. He shut down the computer, and since that time, we are unable to even access iTunes at all. If you click on the icon you just get the message above. No one wants to risk plugging their iPod into it and losing thier songs since their is no back-up for the music.
There are 3 iPods working fron that computer and there were hundreds of purchased songs. We can't even open the library now, and my son lost a ton of stuff when he synced his trying to get his movie.
Any ideas?

These directions should fix you up. Don't pay attention to the title of the article, just see if opening a previous itunes library works.
http://support.apple.com/kb/TS1967

TS2776 I can"t syn my ipod nano as I had a new version of itunes installed as my old version was not working at all. The message I get is that it can't sync as my old music library is not on the new version of itunes but I still have it on my ipod.

I can't sync my ipod nano with the new version of itunes that I downloaded as the old version was not working. The response I get is that" it can't sync due to my old music library which I still have on my ipod, can someone help with this, Thanks Peter

See Recover your iTunes library from your iPod or iOS device.
tt2

ITunes corrupted, must be reinstalled. Now 'the file iTunes Library itl. cannot be read, created by newer version of iTunes.'

My iTunes programme on Windows PC has suddenly become corrupted and must be reinstalled. After two attempts, I installed the requisite 64 bit version, but it won't open as "The file 'iTunes Library itl.' cannot be read because it was created by a newer version of iTunes." Where do I go from here (bearing in mind very little technical knowhow!)?

There are two things you can try here:
If you updated fairly recently, you can recover a backup copy of the library file made when you updated.
http://support.apple.com/kb/TS1967?viewlocale=en_US
This gives you the library as it was when you updated.
Or you can recreate your library from the xml file, this will be more up to date, but not all the metadata is recovered.
http://support.apple.com/kb/HT1451
At the end of the article it tells you how to add files you your library if you don't have an xml file.
Anywhere it tells you to drag a file to the trash in either article, I would drag it to the desktop or another folder of your choice in case you need it later.
The second article also include links to general troubleshooting if iTunes will not start after recovering/recreating your library.

Cannot uninstall or install any newer versions of itunes

My laptop recently had to have the registry recovered. I'm sure this problem is related to the registry, but I don't know what key is preventing this from happening. Whenever I try to install any newer versions of itunes I get an error about the apple updater software cannot be uninstalled because the associated .msi can't be found. I even point to the .msi and it still fails. I have even tried to completely remove itunes and I get the same error. First of all, I don't understand why apple has designed the install files to remove previous versions when merely upgrading them would fix any problems like this. So, if anyone knows how to fix this, please help! I am now several versions behind and am getting errors adding music to my shopping cart because of it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cannot install quicktime due to newer version already installed

I'm in desperate need of help. I've been trying to install Itunes for the last 4 nights but QUICKTIME is messing it up. I keep getting the error that a newer version of QUICKTIME is already installed and the installation can't continue.
I've been scouring the internet for hours over several nights to find a solution without luck.
There is no entry in the Programs uninstaller for Quicktime.
I've scoured all my HDs for quicktime and removed all entries
I've run several reg cleaners and regedit to clean out any reference to Quicktime
I've used the 'how to uninstall quicktime' support page and used the MS install cleanup utility, cleaned out temp files, used JV Powertools to clean out Quicktime.
I've used both the standalone installer and the Itunes installer
I've tried using safemode to install but the installer doesn't work in safe mode
I've tried uninstalling several codecs in the chance that they are somehow effecting this
I'm at the end of my rope and both me and the internet appear to be out of ideas. Of course, I need to get Quicktime on to use Itunes and my Itouch.
I'm running a fully updated Vista install. Any suggestions would be appreciated.

I am having the same problem. I am using Windows XP on an HP Media Center PC m7167c. I have tried everything to fix the issue. Nothing works. HEY APPLE, Can you please fix your QuickTime installer to override the "Newer Version Already Installed" message when there is no QuickTime installed. This problem has been going on for over a year. Please provide an easy alternative way to FORCE INSTALL QUICKTIME. Thanks

All software up to date, but telling me I cannot open files edited in 'newer version' help!

I'm a Graphic design student, so work between my Mac at home and one in Class. I've now gone to open files last edited in class, and am receiving an error message to say this was saved with a newer version (CC 10.1), however my Creative Cloud at home has no pending updates- how can I fix this? Your help would be hugely appreciated!

Hi Whitneyd
Here is a helpful link that explains how to save back to earlier versions of the file
Can You Open/Use/Export/Save Adobe CC Files on CS6 – and Back? | ProDesignTools
For example: If you are using Indesign, you can save your file as .IDML files.
Let us know if you have any questions
Thanks
Scott

Cannot find FindById..My old script cannot work anymore in SAP new version.

Similar Messages

Maybe you are looking for