Cannot find host

HI all, I am having a little trouble with my network. I have an WRT54GS router and I am having trouble with the pc with the wirless adapter. It is running Windows ME and I can ping my router with no problem, and there is no problem logging onto my network at all. I just can't log onto my email or internet at all. I get cannot find host or this page cannot be displayed errror. I have the right DNS server and the right isp configured in it but it will not let me log on at all.Any help would be appreciated. Jabe

hi there, I would like to know how many computers do you have there... how may are hardwired and wirelessly connected ones?
who's your ISP?
what's the exact model number of your router?
what's the operating system?
"a helping hand in a community makes the world a universe"

Similar Messages

  • Wired Network conputer cannot find host printer

    I cannot print to host printer on a home wired network.
    Printer is HP Photosmart 7520 e all in one.
    Host Compter is a Dell Dimension 8100
    Pentium 4 1.3 GHz  2.0 GB RAM
    Windows XP SP3 host computer.
    Netgear N600 Dual Band Router
    Model WNDR3400
    Network Computer:
    Nobilis
    Pentium 4 dual core 2.8 GHz
    2.5 GB RAM
    Linux Mint 17 OS
    Both computers share the internet without any problems.  The Dell computer prints without any problems.  The Dell computer properties 'share this printer' box is checked.  I cannot find any IP address for the printer.  When I printed out the printer configuration sheet, no IP address was given.  When I go to the Control Center->Printers->local-host on the Linux OS, it says it is 'connected to local-host' and 'There are no pinters configured yet'.  I then selected 'Add' to add a printer.  A 'New Printer' screen comes up and ask to 'Select Device' and also 'Enter URI'.  This is where I am stopped in my tracks since I have no 'URI'.  Under the 'select device' side there are several options: LPT #1, Serial Port #1, Enter URI, and 'Network Printer'.  If Network Printer is selected a dropdown list appears:  The main heading is "Find Network Printer'.  Selecting 'Find Network Printer' gives various internet protocols (ipp, ipps, https, ipp14, LPD/LPR Host or Printer, Windows printer via Samba, and APP Socket/HP Direct.
    The Dell computer has alway worked fine and without problems (XP OS) on any HP printer.
    This is where I am stymied!  Can someone help me from here.

    Can you see the Windows computers when browsing from GO > Connect to server?
    Anything different in network connection - you use wireless, they use ethernet, for example?

  • Hyper-V Guest Cannot Find Host Domain Controller 2012 R2

    Poweredge T320 server as a Domain Controller,  file server and an EXCHANGE 2010 server. There are no other servers at the site. 
    DHCP is from the firewall.   The DC and the file server will be on the host. 
    The 2010 EXCHANGE server will be on the guest.  The Hyper-V 
    2012 R2 server cannot see the Domain Controller on the host 2012 R2 server. 
    The Active Directory is requesting to be promoted to a Domain Controller.  
    I have a logical or physical error in the installation. 
    It is asking to promote the  Hyper-V guest 2012 R2 to a Domain Controller. 
    I believe I should have only one  Domain Controller in this application.  
    After the Hyper-V guest can see the host domain controller I will install EXCHANGE 2010.
    This is a test environment, offsite.
    NIC1 – Host IP:192.168.1.130, 255.255.255.0, Gateway:192.168.1.1, DNS:127.0.0.1
    NIC2- Only Hyper-V switch checked
    Virtual Switch: 192.168.1.140, 255.255.255.0, Gateway: Blank, DNS: Was 127.0.0.1 didn’t work so I pointed it to the host, 192.168.1.130, but that didn’t work either.
    Host adapter: IP:192.168.1.150, 255.255.255.0, 192.168.1.1, DNS Pointing to HOST:162.168.1.130
    Active Directory and DNS installed on the guest.
    Removed IPv6 from both NICs without any change.
    IPAM is not installed on the host or the guest.
    Several articles in Internet search didn’t help.
    Thanks for your help.

    Hi Steve,
    I suggest referring to the following links:
    REMOTEFX, WINDOWS SERVER & HYPER-V SERVER
    http://blogs.technet.com/b/puneetvig/archive/2011/04/21/remotefx-windows-server-amp-hyper-v-server.aspx
    RemoteFX (with Hyper-V) is a serious business tool. For games.
    http://blogs.technet.com/b/tristank/archive/2012/02/17/remotefx-with-hyper-v-is-a-serious-business-tool-for-games.aspx
    Best Regards,
    Vincent Wu
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Cannot find PPoE host, can connect to router but not internet

    I've been having trouble since I tried using the router. At first, I had no security, then I set up the security and couldn't connect to the router. That finally solved, sometimes when trying to connect to the router, I get the message cannot find PPoE host. But, my connection continues to show that it is strong in the bar at the top.
    So, I try to get on the internet -- Safari, Firefox -- no go.
    I run network diagnostics and the first three settings are lit, but the ISP, Internet and Server all show as failed.
    I'm connecting via airport and a linksys router.
    Thanks for any help

    You'll have to go into your router's settings and make sure they're correct. When you connect to the internet through a router, the router has to be set up with the appropriate IP information (like setting it for PPPoE). If you have set your router up properly, then all you have to do is connect your Mac to it, either wirelessly or over ethernet, and it should auto-configure if you have your Network settings on "DHCP" (not the manual DHCP, though). You will get an IP address assigned by your router if it worked.
    Hope that helps. Networking is always confusing.

  • LMS 4.2.4 User Tracking End Host Report The system cannot find the path specified

    Hello at all,
    I have a problem when creating a scheduled User Tracking End Host Report.
    I always get the message "The system cannot find the path specified" and the job fails.
    An immediate report is successful.
    I tried to change the "Report Publish Path" from "C:/Program Files (x86)/CSCOpx/" to "C:/PROGRA~2/CSCOpx/", but that did'nt worked.
    Has anybody an idea?
    Regards, Kerstin

    Share the screenshot of the following directory :
    NMSROOT\CSCOpx\campus\etc\cwsi
    In case it is blank, try following :
    1.Stop the services : net stop crmdmgtd 
    2.Take a copy of > C:/Progra~2/campus/etc/users and place it under C:/Progra~2/campus/etc/cwsi
    3.Start the services : net start crmdmgtd
    Please try and let me know the updates.
    -Thanks
    Vinod
    **Encourage Contributors. RATE them.**

  • Cannot find dashboard and reports after upgrading rdp from 10g to 11g OBIEE

    Hi all
    I am trying to upgrade from OBIEE 10g to 11g. These two products are installed on different servers. I have followed the guide: http://www.oracle.com/technetwork/issue-archive/2011/11-jul/o41bi-402913.html and everything seems to work fine.
    So i have taken a copy of rdp from the server where was installed OBIEE 10g and took it in the server where OBIEE 11g is installed.
    Ran the upgrade tool and upgrade finished successfully. Restarted the BI Servers in core application on Enterprise Manager.
    Now when i access the upgraded rpd, the layers and the fields are fine but I cannot find all the reports and dashboards that i had created.
    Am I missing any upgrade steps?
    Please suggest
    Thank you and best regards

    Hi Deepak,
    Thanks for your response.
    Oracle also came back to me and looks like my method is not valid:
    Hi Jim,
    Thanks a lot for the information. First of all I would like to inform you that upgrade CANNOT be performed across two machine. So, if 10g installation is on Host A, then upgrade to 11g will be on Host A.
    So, in your scenario this is what you can do:
    1. On Host A running Forms/Discoverer 10g on Windows 2003, install Forms/Discoverer/Reports 11g (11.1.1.6.0)
    2. Run the upgrade Assistant to perform the upgrade from 10g to 11g.
    3. Now upgrade OS of Host A to Windows 2008
    In short, I would like to inform you that upgrades across machines does not work. Source instance which is 10g and destination instance which is 11g must exist on same box.
    Here is the documentation which you can follow:
    http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10130/toc.htm
    (Oracle® Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer)
    11g Release 1 (11.1.1)
    Let me know if you have any further questions.
    Thanks,
    Rishi

  • Xorg cannot find screens with nvidia module

    I know that this question is very common, but I cannot find solution,
    I should use "nvidia" drivers on Lenovo notebook with two videocards (work with Cuda technology).
    Xorg cannot load nvidia module with this xorg.conf. Can anybody help?
    Thanks.
    lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
    xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    # Screen 0 "Screen1" 0 0
    # Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "SWcursor" # [<bool>]
    #Option "HWcursor" # [<bool>]
    #Option "NoAccel" # [<bool>]
    #Option "ShadowFB" # [<bool>]
    #Option "UseFBDev" # [<bool>]
    #Option "Rotate" # [<str>]
    #Option "VideoKey" # <i>
    #Option "FlatPanel" # [<bool>]
    #Option "FPDither" # [<bool>]
    #Option "CrtcNumber" # <i>
    #Option "FPScale" # [<bool>]
    #Option "FPTweak" # <i>
    #Option "DualHead" # [<bool>]
    Identifier "Card0"
    Driver "nvidia"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "Backlight" # <str>
    #Option "DRI" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "VideoKey" # <i>
    #Option "Tiling" # [<bool>]
    #Option "LinearFramebuffer" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    #Option "XvPreferOverlay" # [<bool>]
    #Option "HotPlug" # [<bool>]
    #Option "RelaxedFencing" # [<bool>]
    #Option "XvMC" # [<bool>]
    #Option "Throttle" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "DelayedFlush" # [<bool>]
    #Option "TearFree" # [<bool>]
    #Option "PerCrtcPixmaps" # [<bool>]
    #Option "FallbackDebug" # [<bool>]
    #Option "DebugFlushBatches" # [<bool>]
    #Option "DebugFlushCaches" # [<bool>]
    #Option "DebugWait" # [<bool>]
    #Option "BufferCache" # [<bool>]
    #Option "TripleBuffer" # [<bool>]
    Identifier "Card1"
    Driver "intel"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1366x768"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1366x768"
    EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 32
    # Modes "1366x768"
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1366x768"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1366x768"
    EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 32
    # Modes "1366x768"
    # EndSubSection
    EndSection
    Xorg.0.log:
    [ 27.732]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 27.732] X Protocol Version 11, Revision 0
    [ 27.732] Build Operating System: Linux 3.6.2-1-ARCH x86_64
    [ 27.732] Current Operating System: Linux kot_dymok 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
    [ 27.732] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
    [ 27.732] Build Date: 19 October 2012 03:54:56PM
    [ 27.732]
    [ 27.732] Current version of pixman: 0.26.2
    [ 27.732] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 27.732] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 27.732] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 26 01:54:00 2012
    [ 27.732] (==) Using config file: "/etc/X11/xorg.conf"
    [ 27.732] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 27.732] (==) ServerLayout "X.org Configured"
    [ 27.732] (**) |-->Screen "Screen0" (0)
    [ 27.732] (**) | |-->Monitor "Monitor0"
    [ 27.732] (**) | |-->Device "Card0"
    [ 27.732] (**) |-->Input Device "Mouse0"
    [ 27.733] (**) |-->Input Device "Keyboard0"
    [ 27.733] (==) Automatically adding devices
    [ 27.733] (==) Automatically enabling devices
    [ 27.733] (==) Automatically adding GPU devices
    [ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 27.733] Entry deleted from font path.
    [ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 27.733] Entry deleted from font path.
    [ 27.733] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 27.733] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 27.733] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 27.733] (WW) Disabling Mouse0
    [ 27.733] (WW) Disabling Keyboard0
    [ 27.733] (II) Loader magic: 0x7fcc20
    [ 27.733] (II) Module ABI versions:
    [ 27.733] X.Org ANSI C Emulation: 0.4
    [ 27.733] X.Org Video Driver: 13.0
    [ 27.733] X.Org XInput driver : 18.0
    [ 27.733] X.Org Server Extension : 7.0
    [ 27.733] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 27.734] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
    [ 27.734] (--) PCI: (0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
    [ 27.734] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 27.734] Initializing built-in extension Generic Event Extension
    [ 27.734] Initializing built-in extension SHAPE
    [ 27.734] Initializing built-in extension MIT-SHM
    [ 27.734] Initializing built-in extension XInputExtension
    [ 27.734] Initializing built-in extension XTEST
    [ 27.734] Initializing built-in extension BIG-REQUESTS
    [ 27.734] Initializing built-in extension SYNC
    [ 27.734] Initializing built-in extension XKEYBOARD
    [ 27.734] Initializing built-in extension XC-MISC
    [ 27.734] Initializing built-in extension SECURITY
    [ 27.734] Initializing built-in extension XINERAMA
    [ 27.734] Initializing built-in extension XFIXES
    [ 27.734] Initializing built-in extension RENDER
    [ 27.734] Initializing built-in extension RANDR
    [ 27.734] Initializing built-in extension COMPOSITE
    [ 27.734] Initializing built-in extension DAMAGE
    [ 27.734] Initializing built-in extension MIT-SCREEN-SAVER
    [ 27.734] Initializing built-in extension DOUBLE-BUFFER
    [ 27.734] Initializing built-in extension RECORD
    [ 27.734] Initializing built-in extension DPMS
    [ 27.735] Initializing built-in extension X-Resource
    [ 27.735] Initializing built-in extension XVideo
    [ 27.735] Initializing built-in extension XVideo-MotionCompensation
    [ 27.735] Initializing built-in extension XFree86-VidModeExtension
    [ 27.735] Initializing built-in extension XFree86-DGA
    [ 27.735] Initializing built-in extension XFree86-DRI
    [ 27.735] Initializing built-in extension DRI2
    [ 27.735] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 27.735] (II) LoadModule: "glx"
    [ 27.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 27.741] (II) Module glx: vendor="NVIDIA Corporation"
    [ 27.741] compiled for 4.0.2, module version = 1.0.0
    [ 27.741] Module class: X.Org Server Extension
    [ 27.741] (II) NVIDIA GLX Module 304.43 Sun Aug 19 20:34:01 PDT 2012
    [ 27.741] Loading extension GLX
    [ 27.741] (II) LoadModule: "nvidia"
    [ 27.741] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 27.742] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 27.742] compiled for 4.0.2, module version = 1.0.0
    [ 27.742] Module class: X.Org Video Driver
    [ 27.815] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
    [ 27.815] (EE) NVIDIA: system's kernel log for additional error messages.
    [ 27.815] (II) UnloadModule: "nvidia"
    [ 27.815] (II) Unloading nvidia
    [ 27.815] (EE) Failed to load module "nvidia" (module-specific error, 0)
    [ 27.815] (EE) No drivers available.
    [ 27.815]
    Fatal server error:
    [ 27.815] no screens found
    [ 27.815] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 27.815] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 27.815] (EE)
    dmesg.log
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.5.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN33WW(V2.03) 06/06/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 5 base 100000000 mask FC0000000 write-back
    [ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
    [ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
    [ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13f5fffff]
    [ 0.000000] [mem 0x100000000-0x13f5fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x13f5fffff @ [mem 0xbaab9000-0xbaabefff]
    [ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 00000000bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 00000000bafbb000 00040
    [ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
    [ 0.000000] NODE_DATA [mem 0x13f5fc000-0x13f5fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x13f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xbaabefff]
    [ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x13f5fffff]
    [ 0.000000] On node 0 totalpages: 1023564
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 743679 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4056 pages used for memmap
    [ 0.000000] Normal zone: 255528 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
    [ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
    [ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
    [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
    [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
    [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
    [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
    [ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s83392 r8192 d23104 u262144
    [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003118
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3947540k/5232640k available (4661k kernel code, 1138384k absent, 146716k reserved, 4191k data, 760k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2494.278 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.41 BogoMIPS (lpj=8314260)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000025] Security Framework initialized
    [ 0.000028] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001230] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001662] Mount-cache hash table entries: 256
    [ 0.001817] Initializing cgroup subsys cpuacct
    [ 0.001818] Initializing cgroup subsys memory
    [ 0.001825] Initializing cgroup subsys devices
    [ 0.001826] Initializing cgroup subsys freezer
    [ 0.001827] Initializing cgroup subsys net_cls
    [ 0.001828] Initializing cgroup subsys blkio
    [ 0.001850] CPU: Physical Processor ID: 0
    [ 0.001850] CPU: Processor Core ID: 0
    [ 0.001854] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.002211] mce: CPU supports 7 MCE banks
    [ 0.002221] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002227] using mwait in idle threads.
    [ 0.003141] ACPI: Core revision 20120320
    [ 0.021624] ftrace: allocating 18032 entries in 71 pages
    [ 0.029975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.062936] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
    [ 0.166795] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    [ 0.166800] ... version: 3
    [ 0.166801] ... bit width: 48
    [ 0.166802] ... generic registers: 4
    [ 0.166803] ... value mask: 0000ffffffffffff
    [ 0.166804] ... max period: 000000007fffffff
    [ 0.166804] ... fixed-purpose events: 3
    [ 0.166805] ... event mask: 000000070000000f
    [ 0.186863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.200098] Booting Node 0, Processors #1 #2 #3
    [ 0.266902] Brought up 4 CPUs
    [ 0.266905] Total of 4 processors activated (19962.65 BogoMIPS).
    [ 0.269981] devtmpfs: initialized
    [ 0.270796] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
    [ 0.271536] NET: Registered protocol family 16
    [ 0.271635] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.271637] ACPI: bus type pci registered
    [ 0.271695] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.271697] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.277539] PCI: Using configuration type 1 for base access
    [ 0.277665] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.277666] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.277666] mtrr: corrected configuration.
    [ 0.277952] bio: create slab <bio-0> at 0
    [ 0.277994] ACPI: Added _OSI(Module Device)
    [ 0.277995] ACPI: Added _OSI(Processor Device)
    [ 0.277996] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.277997] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.279372] ACPI: EC: Look up EC in DSDT
    [ 0.280773] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.283353] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.284330] ACPI: SSDT 00000000bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
    [ 0.284681] ACPI: Dynamic OEM Table Load:
    [ 0.284683] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
    [ 0.284902] ACPI: SSDT 00000000bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
    [ 0.285275] ACPI: Dynamic OEM Table Load:
    [ 0.285277] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
    [ 0.285380] ACPI: SSDT 00000000bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
    [ 0.285725] ACPI: Dynamic OEM Table Load:
    [ 0.285726] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
    [ 0.286579] ACPI: Interpreter enabled
    [ 0.286581] ACPI: (supports S0 S3 S4 S5)
    [ 0.286600] ACPI: Using IOAPIC for interrupt routing
    [ 0.409275] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.409424] ACPI: No dock devices found.
    [ 0.409427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.409682] \_SB_.PCI0:_OSC invalid UUID
    [ 0.409683] _OSC request data:1 8 1f
    [ 0.409687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.410085] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
    [ 0.410087] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
    [ 0.410089] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.410091] pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xfeafffff]
    [ 0.410117] PCI host bridge to bus 0000:00
    [ 0.410119] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
    [ 0.410121] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
    [ 0.410122] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.410123] pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 0.410131] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
    [ 0.410164] pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
    [ 0.410192] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
    [ 0.410210] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
    [ 0.410220] pci 0000:00:02.0: >reg 10: [mem 0xd3400000-0xd37fffff 64bit]
    [ 0.410226] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.410231] pci 0000:00:02.0: >reg 20: [io 0x4000-0x403f]
    [ 0.410281] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
    [ 0.410303] pci 0000:00:14.0: >reg 10: [mem 0xd3a00000-0xd3a0ffff 64bit]
    [ 0.410373] pci 0000:00:14.0: >PME# supported from D3hot D3cold
    [ 0.410396] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
    [ 0.410419] pci 0000:00:16.0: >reg 10: [mem 0xd3a14000-0xd3a1400f 64bit]
    [ 0.410494] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
    [ 0.410528] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
    [ 0.410779] pci 0000:00:1a.0: >reg 10: [mem 0xd3a19000-0xd3a193ff]
    [ 0.412197] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
    [ 0.412223] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
    [ 0.412237] pci 0000:00:1b.0: >reg 10: [mem 0xd3a10000-0xd3a13fff 64bit]
    [ 0.412305] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
    [ 0.412329] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
    [ 0.412408] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
    [ 0.412433] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
    [ 0.412512] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
    [ 0.412546] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
    [ 0.412788] pci 0000:00:1d.0: >reg 10: [mem 0xd3a18000-0xd3a183ff]
    [ 0.414203] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
    [ 0.414230] pci 0000:00:1f.0: >[8086:1e59] type 00 class 0x060100
    [ 0.414353] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
    [ 0.414371] pci 0000:00:1f.2: >reg 10: [io 0x4088-0x408f]
    [ 0.414379] pci 0000:00:1f.2: >reg 14: [io 0x4094-0x4097]
    [ 0.414387] pci 0000:00:1f.2: >reg 18: [io 0x4080-0x4087]
    [ 0.414396] pci 0000:00:1f.2: >reg 1c: [io 0x4090-0x4093]
    [ 0.414404] pci 0000:00:1f.2: >reg 20: [io 0x4060-0x407f]
    [ 0.414412] pci 0000:00:1f.2: >reg 24: [mem 0xd3a17000-0xd3a177ff]
    [ 0.414457] pci 0000:00:1f.2: >PME# supported from D3hot
    [ 0.414475] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
    [ 0.414491] pci 0000:00:1f.3: >reg 10: [mem 0xd3a15000-0xd3a150ff 64bit]
    [ 0.414512] pci 0000:00:1f.3: >reg 20: [io 0x4040-0x405f]
    [ 0.414568] pci 0000:01:00.0: >[10de:0de9] type 00 class 0x030000
    [ 0.414578] pci 0000:01:00.0: >reg 10: [mem 0xd2000000-0xd2ffffff]
    [ 0.414589] pci 0000:01:00.0: >reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.414600] pci 0000:01:00.0: >reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.414607] pci 0000:01:00.0: >reg 24: [io 0x3000-0x307f]
    [ 0.414615] pci 0000:01:00.0: >reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.419807] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
    [ 0.419812] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
    [ 0.419816] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
    [ 0.419834] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.419945] pci 0000:02:00.0: >[1969:1090] type 00 class 0x020000
    [ 0.420065] pci 0000:02:00.0: >reg 10: [mem 0xd3900000-0xd393ffff 64bit]
    [ 0.420115] pci 0000:02:00.0: >reg 18: [io 0x2000-0x207f]
    [ 0.420574] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.426507] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
    [ 0.426512] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
    [ 0.426516] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
    [ 0.426588] pci 0000:03:00.0: >[168c:002b] type 00 class 0x028000
    [ 0.426615] pci 0000:03:00.0: >reg 10: [mem 0xd3800000-0xd380ffff 64bit]
    [ 0.426744] pci 0000:03:00.0: >supports D1
    [ 0.426746] pci 0000:03:00.0: >PME# supported from D0 D1 D3hot
    [ 0.433127] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
    [ 0.433150] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
    [ 0.433170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.433258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.433280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.433313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.433378] \_SB_.PCI0:_OSC invalid UUID
    [ 0.433379] _OSC request data:1 1f 1f
    [ 0.433382] pci0000:00: >Requesting ACPI _OSC control (0x1d)
    [ 0.433416] \_SB_.PCI0:_OSC invalid UUID
    [ 0.433417] _OSC request data:1 0 1d
    [ 0.433420] pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 0.433421] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.435631] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.435669] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.435705] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.435740] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.435774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.435809] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 0.435844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 0.435879] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.435945] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.435951] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.435952] vgaarb: loaded
    [ 0.435953] vgaarb: bridge control possible 0000:01:00.0
    [ 0.435954] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.435977] PCI: Using ACPI for IRQ routing
    [ 0.437526] PCI: pci_cache_line_size set to 64 bytes
    [ 0.437598] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.437599] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.437600] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
    [ 0.437602] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
    [ 0.437603] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
    [ 0.437671] NetLabel: Initializing
    [ 0.437672] NetLabel: domain hash size = 128
    [ 0.437673] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.437681] NetLabel: unlabeled traffic allowed by default
    [ 0.437696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.437700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.439709] Switching to clocksource hpet
    [ 0.443743] pnp: PnP ACPI init
    [ 0.443758] ACPI: bus type pnp registered
    [ 0.444001] pnp 00:00: >[bus 00-3e]
    [ 0.444004] pnp 00:00: >[io 0x0000-0x0cf7 window]
    [ 0.444005] pnp 00:00: >[io 0x0cf8-0x0cff]
    [ 0.444007] pnp 00:00: >[io 0x0d00-0xffff window]
    [ 0.444008] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
    [ 0.444010] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
    [ 0.444011] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
    [ 0.444012] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
    [ 0.444013] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
    [ 0.444015] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
    [ 0.444016] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
    [ 0.444017] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
    [ 0.444019] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
    [ 0.444021] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
    [ 0.444023] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
    [ 0.444024] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
    [ 0.444025] pnp 00:00: >[mem 0x000ec000-0x000effff window]
    [ 0.444027] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
    [ 0.444028] pnp 00:00: >[mem 0xbfa00000-0xfeafffff window]
    [ 0.444029] pnp 00:00: >[mem 0x00010000-0x0001ffff window]
    [ 0.444084] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.444094] pnp 00:01: >[io 0x0000-0x001f]
    [ 0.444095] pnp 00:01: >[io 0x0081-0x0091]
    [ 0.444096] pnp 00:01: >[io 0x0093-0x009f]
    [ 0.444097] pnp 00:01: >[io 0x00c0-0x00df]
    [ 0.444099] pnp 00:01: >[dma 4]
    [ 0.444115] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.444121] pnp 00:02: >[mem 0xff010000-0xffffffff]
    [ 0.444135] pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.444191] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
    [ 0.444207] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.444214] pnp 00:04: >[io 0x00f0]
    [ 0.444222] pnp 00:04: >[irq 13]
    [ 0.444238] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.444246] pnp 00:05: >[io 0x002e-0x002f]
    [ 0.444247] pnp 00:05: >[io 0x004e-0x004f]
    [ 0.444248] pnp 00:05: >[io 0x0061]
    [ 0.444249] pnp 00:05: >[io 0x0063]
    [ 0.444251] pnp 00:05: >[io 0x0065]
    [ 0.444252] pnp 00:05: >[io 0x0067]
    [ 0.444253] pnp 00:05: >[io 0x0070]
    [ 0.444254] pnp 00:05: >[io 0x0080]
    [ 0.444255] pnp 00:05: >[io 0x0092]
    [ 0.444256] pnp 00:05: >[io 0x00b2-0x00b3]
    [ 0.444257] pnp 00:05: >[io 0x0680-0x069f]
    [ 0.444259] pnp 00:05: >[io 0x1000-0x100f]
    [ 0.444260] pnp 00:05: >[io 0xffff]
    [ 0.444261] pnp 00:05: >[io 0xffff]
    [ 0.444262] pnp 00:05: >[io 0x0400-0x0453]
    [ 0.444263] pnp 00:05: >[io 0x0458-0x047f]
    [ 0.444264] pnp 00:05: >[io 0x0500-0x057f]
    [ 0.444266] pnp 00:05: >[io 0x164e-0x164f]
    [ 0.444267] pnp 00:05: >[io 0xfd60-0xfd63]
    [ 0.444300] system 00:05: >[io 0x0680-0x069f] has been reserved
    [ 0.444302] system 00:05: >[io 0x1000-0x100f] has been reserved
    [ 0.444303] system 00:05: >[io 0xffff] has been reserved
    [ 0.444305] system 00:05: >[io 0xffff] has been reserved
    [ 0.444306] system 00:05: >[io 0x0400-0x0453] has been reserved
    [ 0.444308] system 00:05: >[io 0x0458-0x047f] has been reserved
    [ 0.444309] system 00:05: >[io 0x0500-0x057f] has been reserved
    [ 0.444311] system 00:05: >[io 0x164e-0x164f] has been reserved
    [ 0.444312] system 00:05: >[io 0xfd60-0xfd63] has been reserved
    [ 0.444315] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.444322] pnp 00:06: >[io 0x0070-0x0077]
    [ 0.444327] pnp 00:06: >[irq 8]
    [ 0.444341] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.444360] pnp 00:07: >[io 0x0454-0x0457]
    [ 0.444385] system 00:07: >[io 0x0454-0x0457] has been reserved
    [ 0.444387] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.444394] pnp 00:08: >[io 0x0060]
    [ 0.444396] pnp 00:08: >[io 0x0064]
    [ 0.444400] pnp 00:08: >[irq 1]
    [ 0.444416] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.444460] pnp 00:09: >[irq 12]
    [ 0.444479] pnp 00:09: >Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
    [ 0.503108] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
    [ 0.503110] pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
    [ 0.503111] pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
    [ 0.503113] pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
    [ 0.503114] pnp 00:0a: >[mem 0xf0000000-0xf3ffffff]
    [ 0.503115] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
    [ 0.503116] pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
    [ 0.503117] pnp 00:0a: >[mem 0xff000000-0xff000fff]
    [ 0.503119] pnp 00:0a: >[mem 0xff010000-0xffffffff]
    [ 0.503120] pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
    [ 0.503121] pnp 00:0a: >[mem 0xbfa00000-0xbfa00fff]
    [ 0.503153] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.503154] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.503156] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.503159] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.503161] system 00:0a: >[mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.503162] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.503164] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.503165] system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
    [ 0.503167] system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
    [ 0.503169] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.503170] system 00:0a: >[mem 0xbfa00000-0xbfa00fff] has been reserved
    [ 0.503173] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.503426] pnp 00:0b: >[mem 0x20000000-0x201fffff]
    [ 0.503428] pnp 00:0b: >[mem 0x40004000-0x40004fff]
    [ 0.503467] system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
    [ 0.503469] system 00:0b: >[mem 0x40004000-0x40004fff] has been reserved
    [ 0.503471] system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.503484] pnp: PnP ACPI: found 12 devices
    [ 0.503485] ACPI: ACPI bus type pnp unregistered
    [ 0.509719] pci 0000:01:00.0: >no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.509749] pci 0000:01:00.0: >BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
    [ 0.509751] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
    [ 0.509753] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
    [ 0.509756] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
    [ 0.509758] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.509761] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
    [ 0.509764] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
    [ 0.509769] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
    [ 0.509778] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
    [ 0.509783] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
    [ 0.509815] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
    [ 0.509816] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
    [ 0.509818] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.509819] pci_bus 0000:00: >resource 7 [mem 0xbfa00000-0xfeafffff]
    [ 0.509821] pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff]
    [ 0.509822] pci_bus 0000:01: >resource 1 [mem 0xd2000000-0xd30fffff]
    [ 0.509824] pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.509825] pci_bus 0000:02: >resource 0 [io 0x2000-0x2fff]
    [ 0.509827] pci_bus 0000:02: >resource 1 [mem 0xd3900000-0xd39fffff]
    [ 0.509828] pci_bus 0000:03: >resource 1 [mem 0xd3800000-0xd38fffff]
    [ 0.509849] NET: Registered protocol family 2
    [ 0.509940] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.510462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.511934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.512121] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.512123] TCP: reno registered
    [ 0.512131] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.512148] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.512215] NET: Registered protocol family 1
    [ 0.512227] pci 0000:00:02.0: >Boot video device
    [ 0.539686] PCI: CLS 64 bytes, default 64
    [ 0.539720] Unpacking initramfs...
    [ 0.587463] Freeing initrd memory: 3004k freed
    [ 0.587782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.587786] software IO TLB [mem 0xb6ab9000-0xbaab8fff] (64MB) mapped at [ffff8800b6ab9000-ffff8800baab8fff]
    [ 0.587808] Simple Boot Flag at 0x44 set to 0x1
    [ 0.588188] audit: initializing netlink socket (disabled)
    [ 0.588201] type=2000 audit(1351239412.473:1): initialized
    [ 0.598216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.599469] VFS: Disk quotas dquot_6.5.2
    [ 0.599501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.599601] msgmni has been set to 7715
    [ 0.599760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.599785] io scheduler noop registered
    [ 0.599786] io scheduler deadline registered
    [ 0.599824] io scheduler cfq registered (default)
    [ 0.599901] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
    [ 0.600058] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.600059] vesafb: scrolling: redraw
    [ 0.600061] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.600464] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k
    [ 0.667429] Console: switching to colour frame buffer device 170x48
    [ 0.734140] fb0: VESA VGA frame buffer device
    [ 0.734147] intel_idle: does not run on family 6 model 58
    [ 0.734170] GHES: HEST is not enabled!
    [ 0.734209] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.734579] Linux agpgart interface v0.103
    [ 0.734634] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
    [ 0.748568] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.748578] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.748663] mousedev: PS/2 mouse device common for all mice
    [ 0.748692] rtc_cmos 00:06: >RTC can wake from S4
    [ 0.748829] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
    [ 0.748861] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.748868] cpuidle: using governor ladder
    [ 0.748870] cpuidle: using governor menu
    [ 0.748966] drop_monitor: Initializing network drop monitor service
    [ 0.749023] TCP: cubic registered
    [ 0.749094] NET: Registered protocol family 10
    [ 0.749220] NET: Registered protocol family 17
    [ 0.749227] Key type dns_resolver registered
    [ 0.749314] PM: Checking hibernation image partition /dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff
    [ 0.762323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.775385] PM: Hibernation image not present or could not be loaded.
    [ 0.775393] registered taskstats version 1
    [ 0.775839] rtc_cmos 00:06: >setting system clock to 2012-10-26 08:16:53 UTC (1351239413)
    [ 0.776874] Freeing unused kernel memory: 760k freed
    [ 0.776957] Write protecting the kernel read-only data: 8192k
    [ 0.780137] Freeing unused kernel memory: 1472k freed
    [ 0.781606] Freeing unused kernel memory: 608k freed
    [ 0.787240] systemd-udevd[47]: starting version 194
    [ 0.813888] ACPI: bus type usb registered
    [ 0.813910] usbcore: registered new interface driver usbfs
    [ 0.813918] usbcore: registered new interface driver hub
    [ 0.813955] usbcore: registered new device driver usb
    [ 0.815211] SCSI subsystem initialized
    [ 0.816356] libata version 3.00 loaded.
    [ 0.816442] xhci_hcd 0000:00:14.0: >setting latency timer to 64
    [ 0.816447] xhci_hcd 0000:00:14.0: >xHCI Host Controller
    [ 0.816456] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 1
    [ 0.816560] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
    [ 0.816578] xhci_hcd 0000:00:14.0: >irq 21, io mem 0xd3a00000
    [ 0.816632] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
    [ 0.816791] xHCI xhci_add_endpoint called for root hub
    [ 0.816793] xHCI xhci_check_bandwidth called for root hub
    [ 0.816874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.816904] hub 1-0:1.0: >USB hub found
    [ 0.816914] hub 1-0:1.0: >4 ports detected
    [ 0.817280] xhci_hcd 0000:00:14.0: >xHCI Host Controller
    [ 0.817286] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 2
    [ 0.817469] xHCI xhci_add_endpoint called for root hub
    [ 0.817471] xHCI xhci_check_bandwidth called for root hub
    [ 0.817493] hub 2-0:1.0: >USB hub found
    [ 0.817500] hub 2-0:1.0: >4 ports detected
    [ 0.822755] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
    [ 0.822761] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
    [ 0.822768] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
    [ 0.822798] ehci_hcd 0000:00:1a.0: >debug port 2
    [ 0.826690] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
    [ 0.826709] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xd3a19000
    [ 0.835913] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
    [ 0.836049] hub 3-0:1.0: >USB hub found
    [ 0.836052] hub 3-0:1.0: >2 ports detected
    [ 0.836166] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
    [ 0.836170] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
    [ 0.836177] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
    [ 0.836203] ehci_hcd 0000:00:1d.0: >debug port 2
    [ 0.840097] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
    [ 0.840110] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xd3a18000
    [ 0.849231] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
    [ 0.849353] hub 4-0:1.0: >USB hub found
    [ 0.849356] hub 4-0:1.0: >2 ports detected
    [ 0.849406] ahci 0000:00:1f.2: >version 3.0
    [ 0.849473] ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
    [ 0.849524] ahci: SSS flag set, parallel bus scan disabled
    [ 0.862579] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 0.862582] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst
    [ 0.862586] ahci 0000:00:1f.2: >setting latency timer to 64
    [ 0.869649] scsi0 : ahci
    [ 0.869722] scsi1 : ahci
    [ 0.869780] scsi2 : ahci
    [ 0.869834] scsi3 : ahci
    [ 0.869889] scsi4 : ahci
    [ 0.869943] scsi5 : ahci
    [ 0.870010] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 42
    [ 0.870011] ata2: DUMMY
    [ 0.870014] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 42
    [ 0.870015] ata4: DUMMY
    [ 0.870016] ata5: DUMMY
    [ 0.870016] ata6: DUMMY
    [ 1.142189] usb 3-1: >new high-speed USB device number 2 using ehci_hcd
    [ 1.188798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.242364] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
    [ 1.242367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.244122] ata1.00: configured for UDMA/100
    [ 1.244233] scsi 0:0:0:0: >Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
    [ 1.265963] hub 3-1:1.0: >USB hub found
    [ 1.266053] hub 3-1:1.0: >6 ports detected
    [ 1.371886] usb 4-1: >new high-speed USB device number 2 using ehci_hcd
    [ 1.495531] hub 4-1:1.0: >USB hub found
    [ 1.495628] hub 4-1:1.0: >6 ports detected
    [ 1.561668] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.561806] usb 3-1.3: >new full-speed USB device number 3 using ehci_hcd
    [ 1.566490] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
    [ 1.567395] ata3.00: configured for UDMA/100
    [ 1.569763] scsi 2:0:0:0: >CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
    [ 1.572713] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.572771] sd 0:0:0:0: >[sda] Write Protect is off
    [ 1.572774] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
    [ 1.572806] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.579557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.579561] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.579683] sr 2:0:0:0: >Attached scsi CD-ROM sr0
    [ 1.588282] Refined TSC clocksource calibration: 2494.333 MHz.
    [ 1.588300] Switching to clocksource tsc
    [ 1.646147] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
    [ 1.646510] sd 0:0:0:0: >[sda] Attached SCSI disk
    [ 1.711612] usb 3-1.4: >new high-speed USB device number 4 using ehci_hcd
    [ 1.861415] usb 4-1.6: >new high-speed USB device number 3 using ehci_hcd
    [ 3.905748] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.297029] systemd-udevd[165]: starting version 194
    [ 6.879435] ACPI: Requesting acpi_cpufreq
    [ 6.901533] Monitor-Mwait will be used to enter C-1 state
    [ 6.901538] Monitor-Mwait will be used to enter C-2 state
    [ 6.901542] ACPI: acpi_idle registered with cpuidle
    [ 7.242423] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
    [ 7.242428] ACPI: Power Button [PWRB]
    [ 7.243055] ACPI: AC Adapter [ACAD] (on-line)
    [ 7.243224] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
    [ 7.243227] ACPI: Sleep Button [SLPB]
    [ 7.243264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 7.243282] ACPI: Lid Switch [LID0]
    [ 7.243312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 7.243314] ACPI: Power Button [PWRF]
    [ 7.250773] thermal LNXTHERM:00: >registered as thermal_zone0
    [ 7.250778] ACPI: Thermal Zone [TZ00] (54 C)
    [ 7.450794] ACPI: Battery Slot [BAT1] (battery present)
    [ 7.582945] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612108] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612381] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612637] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.612948] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 7.634516] input: Ideapad extra buttons as /devices/platform/ideapad/input/input5
    [ 7.648434] Compat-wireless backport release: compat-wireless-v3.6-rc6-1-npc
    [ 7.648436] Backport based on linux-stable.git v3.6-rc6
    [ 7.648436] compat.git: linux-stable.git
    [ 7.734886] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
    [ 7.734890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734893] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
    [ 7.734896] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
    [ 7.734898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734899] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 7.737294] mei 0000:00:16.0: >setting latency timer to 64
    [ 7.737362] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
    [ 7.743686] mei 0000:00:16.0: >wd: failed to find the client
    [ 7.757142] agpgart-intel 0000:00:00.0: >Intel Ivybridge Chipset
    [ 7.757223] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
    [ 7.758105] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory
    [ 7.758213] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xe0000000
    [ 7.972440] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
    [ 7.972474] alx 0000:02:00.0: >DMA to 64-BIT addresses
    [ 7.972555] alx 0000:02:00.0: >(unregistered net_device): HW Flags = 0x15
    [ 7.973019] alx 0000:02:00.0: >(unregistered net_device): reset PHY, pws = 1, az = 0, ptp = 0
    [ 7.974361] alx 0000:02:00.0: >(unregistered net_device): speed = 0x2f, autoneg = 1
    [ 7.975707] alx 0000:02:00.0: >irq 44 for MSI/MSI-X
    [ 7.975824] alx: Atheros Gigabit Network Connection
    [ 7.977650] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
    [ 8.008080] [drm] Initialized drm 1.1.0 20060810
    [ 8.066122] iTCO_vendor_support: vendor-support=0
    [ 8.075437] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 8.078855] scsi6 : SCSI emulation for RTS5139 USB card reader
    [ 8.078971] scsi 6:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
    [ 8.080194] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
    [ 8.080898] usbcore: registered new interface driver rts5139
    [ 8.166428] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.175247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 8.175288] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 8.175343] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 8.188460] Linux media interface: v0.10
    [ 8.307532] Linux video capture interface: v2.00
    [ 8.337832] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
    [ 8.339661] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6
    [ 8.339707] usbcore: registered new interface driver uvcvideo
    [ 8.339708] USB Video Class driver (1.1.1)
    [ 8.477762] Bluetooth: Core ver 2.16
    [ 8.477776] NET: Registered protocol family 31
    [ 8.477777] Bluetooth: HCI device and connection manager initialized
    [ 8.477779] Bluetooth: HCI socket layer initialized
    [ 8.477780] Bluetooth: L2CAP socket layer initialized
    [ 8.477784] Bluetooth: SCO socket layer initialized
    [ 8.491954] usbcore: registered new interface driver btusb
    [ 8.639211] hda_codec: CX20590: BIOS auto-probing.
    [ 8.640020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 8.672690] psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
    [ 8.697264] psmouse serio1: >elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
    [ 8.709692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 8.709766] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 8.709813] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 8.710242] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 8.710247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.710479] checking generic (e0000000 410000) vs hw (e0000000 10000000)
    [ 8.710481] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 8.710502] Console: switching to colour dummy device 80x25
    [ 8.710580] i915 0000:00:02.0: >setting latency timer to 64
    [ 8.744483] i915 0000:00:02.0: >irq 46 for MSI/MSI-X
    [ 8.744490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 8.744491] [drm] Driver supports precise vblank timestamp query.
    [ 8.745029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 8.745030] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
    [ 8.825185] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
    [ 9.132101] nvidia: disagrees about version of symbol module_layout
    [ 9.243757] usbcore: registered new interface driver ath3k
    [ 9.265032] usb 3-1.3: >USB disconnect, device number 3
    [ 9.265920] systemd-udevd[329]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh --remove 189 258': No such file or directory
    [ 9.273016] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 9.400084] ath: EEPROM regdomain: 0x65
    [ 9.400085] ath: EEPROM indicates we should expect a direct regpair map
    [ 9.400087] ath: Country alpha2 being used: 00
    [ 9.400088] ath: Regpair used: 0x65
    [ 9.421060] fbcon: inteldrmfb (fb0) is primary device
    [ 9.487637] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
    [ 9.487781] Registered led device: ath9k-phy0
    [ 9.487785] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc900050e0000, irq=17
    [ 9.552614] kvm: disabled by bios
    [ 9.556577] kvm: disabled by bios
    [ 9.601270] Console: switching to colour frame buffer device 170x48
    [ 9.602975] fb0: inteldrmfb frame buffer device
    [ 9.602976] drm: registered panic notifier
    [ 9.603101] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 9.605310] acpi device:38: >registered as cooling_device4
    [ 9.605524] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 9.605938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input12
    [ 9.611483] acpi device:44: >registered as cooling_device5
    [ 9.611810] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 9.611971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
    [ 9.612048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 9.960891] usb 3-1.3: >new full-speed USB device number 5 using ehci_hcd
    [ 10.048160] systemd-udevd[343]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh 189 260 e0': No such file or directory
    [ 11.761061] EXT4-fs (sda7): re-mounted. Opts: data=ordered
    [ 11.956330] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 12.074341] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 12.321742] fuse init (API version 7.19)
    [ 12.703502] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.770085] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.840886] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.906640] Adding 16016768k swap on /dev/sda6. Priority:-1 extents:1 across:16016768k
    I'm sorry for my English.
    Last edited by Kot Dymok (2012-10-26 08:29:53)

    I don't see any messages of loading nvidia ("NVRM") or nouveau. Are you sure that you have installed a module that is compatible with your current kernel?
    You'll also need to patch your ACPI handle or the nouveau/nvidia driver will refuse to load at all, see https://github.com/Bumblebee-Project/bbswitch/issues/2 (this is specific to some machines, your Lenovo G580 machine included)
    Last edited by Lekensteyn (2012-10-29 14:52:55)

  • Tons of Cannot Find SQL Server errors in ULS log

    Background: I inherited the maintenance of this farm. The previous consultant migrated the client from WSS 3.0 to 2013 by way of 2007 MOSS and 2010 (unsure of version). I do not know if there was a "temporary" SQL server used during this process
    that no longer exists. It seems likely given all of the errors regarding a missing SQL server.
    The current 2013 Enterprise farm contains 1 WFE and 3 App servers, 2 of which comprise the search topology. There is one SQL server, not aliased. All machines are VMs. One of the search servers (App) is on a different ESXi host. The timer job that is creating
    all of the ULS errors is running on the WFE. Beyond that, the farm has these symptoms:
    It "works" albeit very slowly. Crawl rate of 2-7 dps for both external file shares and the SP content (both with and without Task Offloading / Chimney Offloading enabled). It seems to frequently recycle or take an otherwise long time to render
    in the browser (any page). Finally, it  spews tens of thousands of errors 24x7 on the WFE saying a SQL server (unnamed) cannot be contacted via Named Pipes.
    Specifically: "Unknown SQL Exception 53 occurred. Additional error information from SQL Server is included below.  A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or
    was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)".
    The next error in the sequence is: "An internal error occurred while running a timer job: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject,
    UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)..."
    This is followed by an error such as this: "There was an internal error invoking the timer job '{E4DDC92E-0056-4E7E-BD3F-1CF5670ACB7D}' for service '{6105D588-FB34-4F1C-82F6-479D7FE146EA}'."
    Of course, each time the timer job mentioned is different. 
    One more error appears consistently with these although not as frequently: "The Execute method of job definition Microsoft.SharePoint.Diagnostics.SPDiagnosticsMetricsProvider (ID 36e6942a-9a80-440f-94a4-e4a606362734) threw an exception. More information
    is included below.  Connection Timeout Expired.  The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement.  This could be because the pre-login handshake failed or the server was unable to respond back in
    time.  The duration spent while attempting to connect to this server was - [Pre-Login] initialization=21276; handshake=0;"
    I have been troubleshooting this for days but am not making much progress. How can I determine just what SQL server it says it cannot find and where that server name is stored? It seems like it has to be part of the Timer job configuration since the two
    things are related.

    Hi,
    Thanks for your sharing and have a good day.
    Jason
    Jason Guo
    TechNet Community Support

  • Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

    I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
    Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
    The event viewer has the following information...
    3008
    A configuration error has occurred.
    5/1/2014 10:41:08 PM
    5/2/2014 5:41:08 AM
    7539d8a38c8b47869eda3f1749aba08d
    1
    1
    0
    /LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
    Full
    /Microsoft-Server-ActiveSync
    C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
    SERVER
    16284
    w3wp.exe
    NT AUTHORITY\SYSTEM
    ConfigurationErrorsException
    Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
    /Microsoft-Server-ActiveSync/default.eas
    174.224.130.31
    False
    NT AUTHORITY\SYSTEM
    24
    NT AUTHORITY\SYSTEM
    False
    at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
    I have tried most, if not all, of the different post's suggestions to no avail.
    The steps I have taken are as follows...
    1. Repaired .Net 4 (Both the client and extended)
    2. Uninstalled and reinstalled .Net Framework 4.0.
    3. Verified that the dll exists.
    4. Checked the applicationHost.config file. It contains the follow statement...
    <add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
    />
    5. Changed the following line in web.config to include the runtimeVersion...
    <add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
    6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
    7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
    I still receive the same error message.
    Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
    Any help would be very appreciated!

    Hi,
    Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
    1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
    2. If it doesn’t work, explore the Default Web site.
    3. Renamed the web.config file to web.config.old
    4. Reset IIS using iisreset command to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

    Hello,
    I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code  (jquery code) in content editor web part on a page, its working fine, but when I am adding
    the same code in an app, its giving me error :  "The system cannot find the file specified. (Exception from HRESULT:
    0x80070002)" - 500 Internal Server error.
    (function () {
    // This code runs when the DOM is ready and creates a context object which is
    // needed to use the SharePoint object model
    $(document).ready(function () {
    //alert('In doc ready');
    $('.attachmentButton').change(function(event){
    var listName = 'UploadTest',
    itemId = 2;
    handleFileChange(listName,itemId,event.target.files);
    function handleFileChange(listName,itemId,files){
    alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
    alert('files.length :=' + files.length);
    var filereader = {},
    file = {},
    i=0;
    //loop over each file selected
    for(i = 0; i < files.length; i++) {
    alert('In for loop');
    file = files[i];
    filereader = new FileReader();
    filereader.filename = file.name;
    alert('filereader.filename :=' + filereader.filename);
    filereader.onload = function() {
    var data = this.result;
    var n=data.indexOf(";base64,") + 8;
    //alert('n :=' + n);
    //removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
    data= data.substring(n);
    //alert('data :=' + data);
    alert('Above SPServices this.filename :=' + this.filename);
    $().SPServices({
    operation: "AddAttachment",
    listName: listName,
    asynch: false,
    listItemID:itemId,
    fileName: this.filename,
    attachment: data,
    completefunc: function (xData, Status) {
    console.log('attachment upload complete',xData,status);
    alert('Status :=' + Status);
    if (Status.toLowerCase() == "error"){
    alert(xData.responseText);
    alert(xData.status);
    alert(xData.statusText);
    filereader.onabort = function() {
    alert("The upload was aborted.");
    filereader.onerror = function() {
    alert("An error occured while reading the file.");
    //fire the onload function giving it the dataurl
    filereader.readAsDataURL(file);
    alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
    alert(xData.status); - gives error - "500"
    alert(xData.statusText); - gives error - "Internal server error"
    Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
    Any suggestions, why I am getting this error in NAPA ?

    Hi,
    According to your post, my understanding is that you have an issue about adding attachments to list items in app.
    To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
    There are two articles about retrieve the list and list items in the host web, you can refer to them.
    http://www.dotnetcurry.com/showarticle.aspx?ID=1028
    http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
    What’s more, we can also use the REST API to achieve the same scenario.
    http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • HT201317 I have a PC with Windows Vista but I cannot find my photo stream anywhere. I followed the directions on the FAQ but it led me nowhere. What do I do?

    I have a PC with Windows Vista but I cannot find my photo stream anywhere. I followed the directions on the FAQ but it led me nowhere. What do I do?

    Well I linked to an article produced and hosted by Apple so I suppose if they have an issue with it the would have to spank themselves
    In addition the US Supreme Court has ruled that making a copy of a DVD for personal use or as a backup is perfectly legal, we've been doing that with CDs for as long as it has been possible, same for video tapes.
    What is illegal is breaking any DRM protection on the media (this holds true for all media not just DVDs) and actually even this is a bit murky. What is definitely illegal is to sell software to break DRM.  However if you write your own DRM breaking software and use it to make personal copies or backups the law gets real gray.
    So again as long as there is no DRM involved its OK, with DRM you're best to leave it alone.
    regards

  • Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

    Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
    2.5. After upgrade if I go to selfservice portal via
    https://myserver.mycompany.com/selfservice, I get this error:
    Server Error in '/SelfService' Application.
    Could not load file or assembly 'System.Web.WebPages.Razor,
    Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
    dependencies. The system cannot find the file specified.
    Description:
    An unhandled exception occurred during the execution of the current web
    request. Please review the stack trace for more information about the error and
    where it originated in the code.
    Exception Details:
    System.IO.FileNotFoundException: Could not load file or assembly
    'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
    PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
    find the file specified.
    Source Error:
    An unhandled exception was generated during the execution of the
    current web request. Information regarding the origin and location of the
    exception can be identified using the exception stack trace below.
    Stack Trace:
    [FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
    System.Web.Mvc.PreApplicationStartCode.Start() +0
    [InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
    System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
    System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
    System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
    System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
    System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
    [HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
    System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
    System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
    System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
    Anyone know how to solve this? Thanks in advance

    Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
    here.
    If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

  • Error [0x80070003] The system cannot find the path specified

    We have Windows 2012 Server hosting 2 VMs - Domain Controller & RDS.  We have been doing Windows Server Backup incremental and have an ongoing issue with scheduled backups each night.  The backup shows completed with warnings and generates
    2 log files.
    The first log files shows:  
    Backup of volume \\?\Volume{5d46f853-5db2-11e2-93e7-806e6f6e6963}\ succeeded.
    Backup of volume C: succeeded.
    Backup of volume F: succeeded.
    Application backup
    Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
       Component: ACBCD71E-A8CA-4672-B951-52C1BE8444BE
       Caption     : Backup Using Child Partition Snapshot\FMLRDS1
       Logical Path: 
    Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
       Component: Host Component
       Caption     : Host Component
       Logical Path: 
    The 2nd log file more often than not shows:  
    Backup of volume E: has failed. Backup failed as shadow copy on source volume got deleted. This might caused by high write activity on the volume. Please retry the backup. If the issue persists consider increasing shadow copy storage using 'VSSADMIN Resize
    ShadowStorage' command.
    Error in backup of E:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
    Application backup
    Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
       Component: 2B4A9541-C88B-442E-9A7A-6D8A27342C11
       Caption     : Backup Using Child Partition Snapshot\FMLDC1
       Logical Path: 
       Error           : 8078010D
       Error Message   : Enumeration of the files failed.
       Detailed Error  : 80070003
       Detailed Error Message : (null)
    We had been getting a successful backup once or twice a week which showed completed (with no mentioned of warnings) but now it regularly shows completed with warnings as noted above.  
    We did a manual full backup of the DC to a different external drive a few days ago and that completed without warnings and the backup shows:  E: Completed 63.38 Full - VSS Copy Backup Successful, 8/27/13 3:35 PM - 4:43 PM. Data Transferred 63.38
    On a side note, we can view the logs in the windows/logs/windowsserverbackup directory but when we attempt to view the details of a log file through the Local Backup Console for any log which shows completed with errors, we get a "MMC has detected an
    error in the snapin and will unload and then it shows Object referenced not set to instance of an object."  The manual backup noted above that was successful is able to be viewed through the Local Backup Console without this error.  
    Any idea as to why this is failing during the scheduled backups?  This hosts a database that we need to have regular successful backups.

    Hi,
    First please follow the steps below to re-register dll files. Detailed information could be found here: http://support.microsoft.com/kb/940032:
    1. Click Start, click Run, type cmd, and then click OK. 
    2. Type the following commands at a command prompt. Press ENTER after you type each command. 
    3. cd /d %windir%\system32 
    4. Net stop vss 
    5. Net stop swprv 
    6. regsvr32 ole32.dll 
    7. regsvr32 oleaut32.dll 
    8. regsvr32 vss_ps.dll 
    9. vssvc /register 
    10. regsvr32 /i swprv.dll 
    11. regsvr32 /i eventcls.dll 
    12. regsvr32 es.dll 
    13. regsvr32 stdprov.dll 
    14. regsvr32 vssui.dll 
    15. regsvr32 msxml.dll 
    16. regsvr32 msxml3.dll 
    17. regsvr32 msxml4.dll 
    Please let us know if any command failed to be performed with an error.
    If issue still exists, have a try with the step it provided "VSSADMIN Resize ShadowStorage" to enlarge the shadow storage.
    Also you could test to delete all old Shadow Copies by acccessing <Drive> Properties --> Shaodow Copies --> Delete Now. This will remove all your backup information so if it is not acceptable, just skip this step.
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • Get-Item: Cannot find path ' ' because it does not exist. While running Powershell script.

    I am trying to run a PowerShell script to upload files into a SharePoint site in an Azure environment...the script works fine on my local machine, but every time I run it in Azure (remotely), I get errors. Here is what my simple script looks like...
    if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue) -eq $null )
    Write-Host "Loading Sharepoint Module "
    [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
    Add-PSSnapin -Name Microsoft.SharePoint.PowerShell
    if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell) -eq $null )
    Write-Host "Failed to load sharepoint snap-in. Could not proceed further, Aborting ..."
    Exit
    #Script settings
    $webUrl = "http://sampleWebUrl"
    $docLibraryName = "My Documents"
    $docLibraryUrlName = "My%20Documents"
    $localFolderPath = get-childitem "C:\Upload\Test Upload\My Documents\" -recurse
    $contentType = "ContenttType1"
    #Open web and library
    $web = Get-SPWeb $webUrl
    write-host "Web:" $web
    $docLibrary = $web.Lists[$docLibraryName]
    write-host "docLibrary:" $docLibrary
    $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
    write-host "files:" $files
    If ($contentType = "ContenttType1")
    #Open file
    $fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
    # Gather the file name
    $FileName = $File.Name
    #remove file extension
    $NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
    #split the file name by the "-" character
    $FileNameArray = $NewName.split("_")
    $check = $FileNameArray.Length
    #Add file
    $folder = $web.getfolder($docLibrary.rootFolder.URL)
    write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
    $spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
    $spItem = $spFile.Item
    write-host "Success"
    write-host "SP File:" $spFile
    write-host "SP Item" $spItem
    #populate columns
    $spItem["Column1"] = $FileNameArray[0]
    $spItem["Column2"] = $FileNameArray[1]
    $spItem.Update()
    $fileStream.Close();
    Again, I can run this on my local machine and it works just fine, but when I attempt to run it on the Azure environment I get this error...
    Get-Item : Cannot find path 'C:\powershellscripts\12653_B7045.PDF' because it does not exist.
    At C:\PowerShellScripts\Upload-FilesIntoSharePointTester.ps1:32 char:42
    +     $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
    +                                          ~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : ObjectNotFound: (C:\powershellscripts\12653_B7045.PDF:String) [Get-Item], ItemNotFoundException
        + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
    What strikes me first is the fact that the file its looking for is in the "C:\Upload\Test Upload\My Documents\" directory, but the error keeps saying "C:\powershellscripts\" which is where my script resides and not the files I want to
    upload into SharePoint. When I step through the code, all the variables are holding the correct values. The $localFolderPath shows the name of files that I am attempting to upload, so it recognizes them. But once I step through this particular line of code,
    the error occurs...
    $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
    Is this an error caused because I am remoting into the Azure environment? Has anyone dealt with this issue before? I would really appreciate the help. Thanks
    Update: quick thing I noticed is that these two lines of code are returning null values. Again, is this handled differently in Azure or remotely? I ask cause this is the way I know how to do this, locally.
    $docLibrary = $web.Lists[$docLibraryName]
    $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()

    "...square brackets are wildcard characters in Windows PowerShell..."
    When you use cd without a parameter it uses the -Path parameter. In this case you'll have to escape the square brackets so they are not considered wildcards. Each of the commands in the first example does the exact same thing.
    cd 'Learn PowerShell `[Do Whatever`]'
    cd -Path 'Learn PowerShell `[Do Whatever`]'
    cd (or Set-Location) also has a literal path parameter (-LiteralPath) that does not require using an escape character (`) before each of the brackets. Hope this helps.
    cd -LiteralPath 'Learn PowerShell [Do Whatever]'

  • The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

    H,
    Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
    Event 1001
    Op Code NLS initialization
    The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
    We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now. 
    I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
    How do we ascertain the  cause of this error and the specific registry key that might be problematic?

    Hi,
    This could be caused by firewall rules or security softwares.
    http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
    And in addition, the fix is worth a try.
    Nothing happens when you double-click "Region" in Control Panel 
    http://support.microsoft.com/kb/2958845
    Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

Maybe you are looking for

  • WLC and Radius that only speaks PAP.

    Hi, I have a costumer with a WLC 2500 controller and a guest-solution with a radius server that only supports PAP authentication to the radius client (WLC). How can I make the WLC talk PAP to the Radius server? It looks like the controller uses MS-CH

  • Windows Media Player always start in small window!!

    I tried everything, I read everything but nothing, this stupid but also awesome program starts in small window! Its only work the first time(open only the program, without any file, make it full, then close it and then only the first time opens in fu

  • Returning String Array

    I'm trying to create a function (method?) for parsing some log files. The first index of the string array I want returned will contain a 'key' on what I'm doing with the log files (since they'll be formatted in several different ways depending on wha

  • Authentication details for Integrtation B2B

    I have installed Application Server 10g, Web Cache. I am facing the following problems regarding authentication... 1) I am trying to open the server console, but it is asking for authentication details....(Username & Password)..what values must be us

  • Can I plug my iPad into my TV and watch a movie from iPad

    If I download a movie from iTunes to my iPad, can I connect my iPad to the TV (flatscreen LG that is internet accessible) and watch the movie. In the same question, can I see my iPad on the TV in general when hooked up? I didn't want to hook it up an