Cannot find Hot Sync Log File

I recently installed Palm dsktop on my new Vista PC. It synchs very well with my TX via bluetooth, BUT whenever there is a Hot Sync Log Message I get an error message saying that the PC cannot find the Hot Sync Log. I searched for this file on my PC but it cannot be found anywhere. I am using Mozilla Firefox as my web browser. Is there a solution to this?
Post relates to: Palm TX

You could view it on your device. Go to HOTSYNC and tap "Log".
Post relates to: Zire 71
Post relates to: Zire 71
webosnation.com is another option for help.

Similar Messages

Cannot find Fixed Asset Log file

I am trying to upload fixed assets with the fixed asset template. I am getting errors. I see on the forum that there is a fixed asset log file, but I cannot find it.
1) Is the log file on my computer or on the server?
2) What is the location of the log file?
Regards,
Fred

Gordon,
I checked the directory where I uploaded the fixed asset file from and there was no log file.
Regards,
Wayne

Cannot Find Errors in Log File

I can't seem to find where the Errors are stored in the Log File, I am trying to write a DataPlugin in VBS, and I'm getting runtime errors at the end of my script. It says to refer to the log file, but there isn't anything in the log file about my error. Where is the error log that this is referring to? Someone help.....

Hi Garett,
You can view the log file directly in DIAdem-SCRIPT, it's the bottom-most window with the gray background. I always have to scroll up a few lines to see the error, and usually there are two or three error events stored in the log file each time the DataPlugin fails to load. The last event, located at the bottom, almost always contains no useful information for DataPlugin debugging. You have to find the first event by scrolling up to find a reference to a line number in the DataPlugin which caused the error.
Also note that the DataPlugin will throw an error if it runs through just fine but does not load any data. In other words, if you are building up your DataPlugin step by step (as you should), and are just at the early stages where you parse a few items in the file and look at their values, you can easily forget to create at least 1 group or channel. If the DataPlugin does not create at least 1 group or channel when it runs through, it will throw an error that the data loading failed, when really there is no error in the DataPlugin beyond that it loaded nothing.
I like to output metadata values I'm parsing from the binary or header file as group properties when I'm building up the DataPlugin step by step, like this:
Set ThisGroup = Root.ChannelGroups.Add(ThisGroupName)
ThisGroup.Properties.Add MetaDataName, MetaDataValue
Then I can look at a long list of metadata values in the Data Portal, and I never forget to load at least 1 group or channel in order to avoid that pesky error that nothing was loaded by the DataPlugin. You can also do the same thing with channel properties, of course:
Set ThisChannel = ThisGroup.Channels.AddImplicitChannel(Name, 0, 1, 2, eI32)
ThisChannel.Properties.Add MetaDataName, MetaDataValue
Let us know if this doesn't help with your current issue,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Curve Sync to Outlook - Cannot find table in system file

I have just upgraded from a Pearl to a Curve, loaded the desktop software and tried to sync to my MS Outlook, but it gives an error message "Cannot find table in system file".
I found a thread which pointed to a solution (ID KB15278), but this did not work. The final step in that solution is to uninstall and reinstall the desktop software, and when I try to do that via Control Panel, it won't remove the software. I seem to have both Version 4.2 and 4.7 of the software on my PC.
Anyone got any suggestions?
Solved!
Go to Solution.

the following article from the public knowledge base will certainly be helpful.
http://www.blackberry.com/btsc/KB02206
Perform a clean uninstall of BlackBerry Desktop Software
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

My iPad is filling up my PowerBook hard disk. Where can I find the sync Photo file to delete it ?

Hi
My iPad is filling up my PowerBook hard disk. Where can I find the sync Photo file to delete it ?
Copying over photos via iTunes/iPhoto - there is a back-up file created (I can not turn it off) and it's now filling my PB-Pro.
So I need to find it and trash it and start over.
- Where is it located ?
- What is it's name ?
Yours Bengt W

Thank You
I found my iPhoto library
ctrl-clicked on it and opened package/content
here I found the iPod photo cashe folder
copyed this to a safe hard disk
then deleting it's content
and my memory/free space on boot drive is back
So I hope all's well.
Yours Bengt W

How do i unistall quicktime if i keep getting the installer note of: the feature you are trying to use on a network resource that is unavailable. i cannot find Quick Time.msi file anywhere. so i cannot uninstall or re install quick time

the feature you are trying to use on a network resource that is unavailable. i cannot find Quick Time.msi file anywhere. so i cannot uninstall or re install quick time
any suggestions please??????

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

I cannot find the sync options that has "add a device" on firefox, all I find is "syncronizing" under tools and when I click on it I get how to set up

''dupe of https://support.mozilla.org/en-US/questions/915557''
I cannot find the "sync options" on my firefox desk top. I can only find "Syncronise now" under tools. I am trying to find "add device" where is it

Sorry about that, it should work now: [http://support.mozilla.com/en-US/kb/How+to+sync+Firefox+settings+between+computers#browser=fx35 How to sync Firefox between computers]

Runtime Error "Cannot find system in table file"

I need assistance!
I have a Blackberry Curve 8310 and have recently installed Version 4.5
I am trying to setup my synchronization. I have followed the steps to setup my calendar to Outlook 2007. It tells me Congratulations! You have successfully configured the product. However, when I press Finish, I get a Runtime Error "Cannot find system in table file"
I have uninstalled the program and reinstalled it - the same error appears.
Any help would be appreciated!
Solved!
Go to Solution.

FIGURED IT OUT!!!
The following steps, which are posted on the RIM Support will work; however, I had to do it a different way. In Step 1, it states that the ilxolkCompanion.fil is located in C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector path...however, when I searched for this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector. (This could be because I upgraded from 4.2.2 to 4.5 w/o completing a clean uninstall...not too sure why)
Once I located the file through the command prompt, I unregistered as per the instructions in Step 1. I then followed step 2 exactly word for word...and VOILA!!! I now have Version 4.5 working with MS Outlook 2007
ResolutionIf the Connectors folder is still present in C\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:
Unregister the old Microsoft Outlook connector ilxolkCompanion.fil.
Open the command prompt.
Navigate to C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector.
Type in the command regsvr32 -u ilxolkCompanion.fil.
In Desktop Manager, Microsoft Outlook will no longer be listed as an available desktop application.
Register the most current Microsoft Outlook connector.
Navigate to C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
Type in the command regsvr32 msoutlookconnector.fil.
In Desktop Manager, Microsoft Outlook will now be registered as an available desktop application.
Once these steps have been completed, configure synchronization again.

DM 4.5, software issues message "Cannot find system in table file"

Serious error in Desktop Manager Software V 4.5Windows XP SP3MS OutlookDesktop Manager Software V 4.5, accompanies new RIM Blackberry Curve package purchased retail Bell MobilityJune 2009
After installation DM 4.5, software issues message “Cannot find system in table file”This happens during “Intellisynch” [Outlook <> Curve] set up. Tried 4 times to make this work – no luck [I am experienced DM user – 4 BBerrys over 8 years]Called Bell Tech support 3 calls total time 2 hours !!Ended up trying to do command prompt and registry setting changes over the phoneDespite 3 long calls this did NOT solve the problem
Went to Blackberry web site -- their remedy is disgraceful - they expect untrained PC users to do clean removes of DM 4.5 with Windows Registry edits by hand. Highly risky – dangerous – and likely will not work
REMEDYUse MS Add/Remove programs to remove DM 4.5 or 4.7Download old version - DM 4.2 Release 2 from BBerry web suiteLoad DM 4.2DM 4.2 works fine – copied 1000 contacts and 1000 calendar entries from Outlook correctly to my new CurveDoug SeabornToronto Canada416 819 3684

Hi and welcome to the forums!
These procedures do work, and are not very hard.
A lot of users have dealt successfully with it.
Here is the Knowledgebase article:
Let us know if you need some help or explanations.
OK?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=1&docTy...
The following error message appears at the end of the synchronization process in BlackBerry® Desktop Manager:
Cannot find table in system file
CauseA BlackBerry Desktop Software upgrade failed to remove the Connectors folder from C:\Program Files\Research In Motion\BlackBerry\Connectors. As a result, older Microsoft Outlook applications were registered with BlackBerry Desktop Software.
Resolution
To resolve this issue, complete the following steps:
Verify that the Connectors folder is present in the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
If the Connectors folder is present, complete the tasks listed below.
Task 1 - Remove the existing Microsoft Outlook connector ilxolkCompanion.fil
Open a command prompt.
Navigate to the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
Type regsvr32 -u ilxolkCompanion.fil. Note: Microsoft Outlook will no longer be listed as an available application in BlackBerry Desktop Manager.
Task 2 - Register the most current Microsoft Outlook connector
Open a command prompt.
Navigate to the following location: C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector
Type regsvr32 msoutlookconnector.fil. Note: Microsoft Outlook will now be registered as an available application in BlackBerry Desktop Manager.
Note: After these tasks are complete, remove and re-install the BlackBerry Desktop Software. For instructions, see KB02206.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Desktop Manager 4.7 (Cannot find system in table file.)

I just updated from Desktop Manager 4.2 to 4.7 on Windows Vista for my Blackberry 8800. When I try to configure synchronization for Microsoft Outlook and click Finish I get the error message "Cannot find system in table file". I've checked everywhere and I cannot find a solution for this problem. Can anyone please help point me in the right direction? Thanks in advance!
Solved!
Go to Solution.

Hi and welcome to the forums!
Upgrading has left some files registered with the wrong or old versions of software.
See the attached link for resolution.
Thanks,
Bifocals
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=2&docTy...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Cannot find system in table file

I got the 8900 series and I upgraded the desktop software to v4.7
I am trying to synchronize with outlook, but when I am configuring it when I click finish it appear this run time error 'cannot find system in table file'
I uninstalled and installed again the desktop software and there was no change.
I tried removing something of connectors and it didn't help.
Can someone please help me with this.
Thanks.

Hi and Welcome to the Forums!
Here is a KB that discusses that error:
KB15278 Receiving error "cannot find table in system file" when attempting to configure BlackBerry Desktop Manager synchronization
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

View Organizer Sync Log File

when i am trying " Configure sync logging options"
In that i am unable to open view organizer sync log file.
it gives me message
AdobeReader could not open "Synclog.html" because it is either not a supported file or because the file has been damaged
Can anyone please help me to solve this problem

Hey,
hav u uninstalld nokia pc suite frm ur PC?
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Windows cannot find creative cloud exe file

I inadvertantly deleted the Creative Cloud Desktop App and have tried to reinstall but get the message that Windows cannot find the Program exe file. How can I resolve this issue?

Hi John.mcdowall,
Please try the steps below and check.
Click Start > Control Panel.
Double-click Programs and Features, select Adobe Creative Cloud, and click Uninstall.
Follow the onscreen instructions.
Download cleaner tool from the link below to remove the Creative Cloud Desktop.
http://www.adobe.com/support/contact/cscleanertool.html
Download and install the Creative Cloud Desktop application from the link below.
http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Regards,
Anand

Cannot find RM ORACLE_XA in file d:\tuxedo1\udataobj\RM

when i execute buildtms -o d:\tuxedo1\bin\TMS_ORA8i -r ORACLE_XA
GP_CAT:1102: ERROR: Cannot find RM ORACLE_XA in file d:\tuxedo1\udataobj\RM
CMDTUX_CAT:530: ERROR: Cannot execute %TUXDIR%\bin\buildserver -r ORACLE_XA -o d
:\tuxedo1\bin\TMS_ORA8i -s TMS -f %TUXDIR%\lib\TMS.obj

Hello,
The user need to put these entriesin the RM file. To use a new resource manager
like Oracle, add an extra entry in this file and build a TMS server.
BEA has lot of documentation on what should go inside the RM for each RDBMS.
HTH
rgds
MS
yunerwater <[email protected]> wrote:
when i execute buildtms -o d:\tuxedo1\bin\TMS_ORA8i -r ORACLE_XA
GP_CAT:1102: ERROR: Cannot find RM ORACLE_XA in file d:\tuxedo1\udataobj\RM
CMDTUX_CAT:530: ERROR: Cannot execute %TUXDIR%\bin\buildserver -r ORACLE_XA
-o d
:\tuxedo1\bin\TMS_ORA8i -s TMS -f %TUXDIR%\lib\TMS.obj

Cannot find the sync option on my iMac to sync my new iPhone 6 .

I have a new 64 iPhone 6+. I have tried to sync it with my iMAC like I did with my iPhone 5 but I cannot find the screen with the sync option. When I go the the menu bar and select File/Devices/Sync, the Sync is grayed out. How do I get this to work?

Syncing is done by using iTunes.

Cannot find Hot Sync Log File

Similar Messages

Maybe you are looking for