Cannot find instructions on how to connect printer to a new wireless network.

HP 4500 series was connected to my wireless network successfully for a year. Upon moving and obtaining new wireless network I cannot find instructions for changing wireless network for printer to recognize.

Hi,
Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Connecting Printer to a new Wireless network (changed network provider)

I have recently changed broadband provider and I am struggling to connect my printer (HP Deskjet 3050A All in One Printer) to my new wireless network.
I have clicked on HP within programs and tried to set up the printer but my laptop is not recgonising that the printer is connected via the cable so its not picking up the printer in order for me to set it up as a new device.
Help please??

jwatson84
Welcome to the HP Community Forum.
The easiest way to deal with this may be to install (reinstall) the Full Feature Software for the printer onto your computer.
The installation procedure includes a connection process that might resolve the issue for you without adding any more stress to the situation.
Along with the basic instructions and install videos, you can find lots of helpful Troubleshooting / Howto help at the printer's website support pages.
TIP: You do want to disconnect the USB cable from the printer before you install / reinstall the software.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Deskjet 3050A e-All-in-One Printer series - J611
Select your Printer from the “Results” list
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

How do I connect my printer to a new wireless network?

I currently have a MacBook Pro and HP Photosmart C4580 All-in-one printer. I have had the printer a long time, and have since lost the cable to connect it to my laptop, and any paperwork or cds recieved with it.
I have been unable to figure out how to change my printer's settings so it is connected to my new house's wireless network, the wireless test report showed it is trying to connect to my old one in another town. I have a usb cable I can borrow to hook the printer up to my laptop, but would like to be able to just print wirelessly. Is there any way to do so?

If you want to change your existing connection to a wireless network, follow these instructions.
Open HP Device Manager.
Figure 5: HP Device Manager icon
From the Information and Settings drop-down menu, click Setup Assistant .
The HP Setup Assistant window opens.
Follow the on-screen instructions to change your connection type to an existing wireless network.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to Connect Airport Express to Existing Wireless Network (Client Mode)

I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
So here's the situation:
Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
Do yourself a favor, toss that user manual aside and run these steps.
(Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
Some pointers:
- When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
- I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
<Edited by Moderator>

Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
Thanks

Windows 8 driver cannot find HP Officejet Pro L7590 ethernet printer on my new router

I'm changing to a new router and had to change the IP address of my ethernet Officejet Pro L7590 from fixed assigned 192.168.1.7 into fixed assigned 192.168.2.168 (my new provider provided router doesn't support the 192.168.1.xx range). At installation my PC Driver cannot find my HP Officejet Pro L7590 ethernet printer, both not by it's search function, nor by giving the specific new IP address. Browsing and login into the printer by adressing the new Static IP address works however fine: de printer is well attached. What do I wrong with at PC driver installation, any suggestions to have the printer coupled to the PC driver?
Update: Connecting the printer directly to the router instead of via a switch solved the problem!

The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
Just trying to help.
Andrew

Setting up HP Officejet 6500A; not sure how to connect to web w/ home wireless network

I have a small home wireless network. I set the printer up today but it says that I must connect to the internet (fax part is working). The only desktop I have, I keep off most the time and just use my laptop (which is for work so I can't set the printer up to this).
Is there a way to connect the printer directly to my router? They are only a few feet from one another; however, I have no clue how to do it and the instructions manual didn't tell me much. Do I need a phone line? What would I use to connect the two?
This question was solved.
View Solution.

Use an Ethernet cable, available in any tech store, online or even Target will have them.
Plug it into the back of the printer and router. You should be able to add the printer to your laptop. Let me know what operating system you have and I can help.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to connect to an ieee stander wireless network in school

I am a student of UNM.
we can't get the wireless connection to our ece deperment if OSX is above 10.5.
we can get the connect under windows and linux but not Mac.
I did asked our IT about this issuse, thire answer was Apple didn't following ieee wireless stander on newer osx.
I tried all the solution on interstant including using iphone developer tools, but it doesn't work.
Is any possible that feture update can fix this problem?

That's a neat trick they used there, relying on IEEE standards, which never had any requirement for interoperability. Their wireless network, while IEEE standard, is not WiFi CERTIFIED as it still uses TKIP.
TKIP on WPA was an interim solution to WEP.
http://wifinetnews.com/archives/2010/06/say_goodbye_to_wep_and_tkip.html
You might send your IT department this link: http://osxdaily.com/2009/09/21/wireless-network-security-change-your-wpa-encrypt ion-from-tkip-to-aes/

Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

Hi, I'm on a Mac OS. I just upgraded my wireless network to use an airport extreme. I have a verizon fios router - same as I had when it used to connect. The only change was adding the airport extreme. Now, the officejet 7410 all-in-one will not connect to the wireless connect. It SEES the name of the network, and asks me for a WEP Key, which it didn't used to do. It used to ask me for the network password. I found the WEP key on the router and it acts like it is trying to connect but takes a long time and then gives me an error. One time it never gave me an error and seemed like it had worked, but was not connected. It just gave up.
My configuration page indicates offline with no active connection and wireless status disconnected.
I restarted everything with no change. I don't know why it would be asking me for a WEP key this time and then not accept it but that was the first indication that something was different when it didn't ask me for the network password.
Also, as a separate issue but related. In trying to fix this, I deleted my drivers to reinstall and see if I started over that it would work. That created another problem in that now it seems that HP no longer supports a driver for this printer. Is that even possible? It's not that old. It says it does not exist on the software update. Please help!

Hi YSJA,
I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
Wireless Printing Center Troubleshooting
http://www.hp.com/global/us/en/wireless/troubleshooting.html
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to connect my G3 to a wireless network-

what do i need to connect my old G3 MAC to i wireless internet connection – my lokal AppleShop don't sell Airport to this old computer – do anybody know how i get wireless?

rberg,
all you need is a wireless router and a wireless internet card
Explore the links below. Just pay attention to the fact that you need to find a Mac compatible wireless PCI card.
The router is not a problem.
http://www.netgear.com
http://www.dlink.com/
I have one installed, serving our three B&W G3 (wired), and connecting wireless with our iBook (equipped with airport).
Their routers are airport compatible. You only need to set them up.

Connecting printer to a secure wireless network which requires both username and password

I have the hp photosmart 6510. I have it in my college dorm, which has a secure network with requires both a user name and password. I need help setting it up as I can't seem to get the printer to enter a username and password. I know the printer works and I know that my computer can print wirelessly with the printer. My college game me this setup configuration.
Configuration Item Preferred Value Optional Value (less preferred)
Network Name of SSID umd-secure
802.1x Operating Mode
(note: 802.11b is no longer supported) Infrastructure or Network (not ad hoc)
Security Mode Enterprise (not Personal)
Network Authentication WPA2 WPA-less prefered
Data Encryption CCMP or AES (TKIP-less prefered)
Roaming Identity or Outer Identity anonymous
Authentication Type or Outer Authentication TTLS (PEAP-Less prefered)
Authentication Protocol or Inner Authentication PAP (MS-CHAPv2-less prefered)
Validate Server Certificate or Verify Server Name Yes
Certificate Issuer or Trusted Root CA Thawte Premium Server CA (Any Trusted CA -less prefered)
Server Name or Certificate Name wireless.umd.edu
Server Name must match Yes

Hi @hatyai ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else

With HP6500A Windows Visa Cable hookup, how to connect printer to network

With HP6500A all in one Windows Visa cable hookup, how to connect printer to network

Welcome to the forums @TonyWE
I understand you are looking to connect your Windows Vista computer, to your network. Below is the guide for you to follow to connect the printer wireless or wired to your network.
I hope this helps
Setting Up the Printer Software for a Wired or Wireless Network for the HP Officejet 6500A e-All-in-...
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to connect my i phone to wireless printer

how to connect my i phone to wireless printer

You would have to have one of the few HP printers that support airprint:
iOS: AirPrint 101
Or you could find an app that provides this feature.

How to connect my mac book pro to network printer Canon IR 2010f?

I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ???

How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
thanks
p.h.thakur

That is not correct sabretooth04,
The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
The specifications can be found in here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en...
ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cannot find instructions on how to connect printer to a new wireless network.

Similar Messages

Maybe you are looking for