Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).

Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).  The existing driver wants me to connect the printer using USB.  The printer is in another facility I am trying to support.

Hi,
The HP M1212nf used the Host-Based printing language, such printing language is not recommended Citrix or Terminal Services envoirnment and not officially supported.. you may try using the Citrix UPD on the server by installing the basic driver for yor printer on the client:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3965849&task=&
(ii) HP does not recommend installing these host-based LaserJet drivers on the Citrix server; however, the devices may function by using the Citrix UPD on the Citrix server with the HP host-based driver installed on the client. Print drivers for your product may be available within the Windows 7 operating system.
http://support.citrix.com/servlet/KbServlet/download/10498-102-693211/Citrix%20Supported%20HP%20Prin...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Cannot Find Drivers on USB Drive While Installing Windows 7

    I'm so annoyed by this whole process.  I have a Macbook Pro Retina, brand new, and I need Windows 7 installed pronto on bootcamp.  Obviously I don't have an optical drive.  I did install Parallels with a Windows 7 ISO downloaded directly from the microsoft website that installed perfectly and works perfectly, but it doesn't run smoothly with the apps I need to use so I need Bootcamp. 
    I've researched on here.  I've tried both a Sandisk Cruzer USB2.0 thumb drive as well as the Sandisk Ultra USB3.0 drive.  I've tried downloading, unzipping and putting the Bootcamp Support files directly on the USB with the windows iso called "WININSTALL" as well as a different USB thumbdrive that I formated to MS-DOS (FAT32).  I cannot find the issue, but once I boot in to install windows, it says it can't find the drivers.  Earlier I could get the keyboard and trackpad work, so using the Bootcamp Assistant I deleted everything and the partition and started over allowing the assistant to do everything (the 3 radio boxes were checked) but then it still doesnt find the frigging drivers.  HELP me please!  Thanks in advance.

    Hey djbolt,
    Success! Finally got it working.
    I was told by Apple support that new Macs that don't have built in DVD drives cannot complete Windows installation from the DVD directly. One must first create a disk image of the Windows install DVD (in Disk Utility), then merge this disc image with the boot camp drivers (done in Bootcamp) onto a USB flash drive.
    These instructions refer to Windows 8, but the process is the same for Windows 7.
    http://support.apple.com/kb/TS5373
    Hope this helps.

  • HP LaserJet Pro M1212nf Multifunction Printer Drivers

    I have HP LaserJet Pro M1212nf Multifunction Printer And i lost the driver cd. Now i want to connect my printer to different pc which has windows 2002. What can i do? I didnt find any driver for this computer in hp drivers pages. Please help me...

    Hello Burcu,
    Welcome to the HP Forums!
    I understand you're looking for a Laserjet M1212nf driver compatible for a Windows 2002 operating system. I will do my best to assist you! I will provide the HP website where all the full features drivers are available here. If your operating system isn't listed, then there are no drivers available.
    The only suggestion I can provide is connecting a USB cable to this printer and your computer. Windows will detect the hardware and try to install a driver. If you have any further questions, please let me know. Have a great night!
    I worked on behalf of HP.

  • How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

    Hi All,
    In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
    The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
    to the Windows 2003 x32 server,  it wants a *.inf file, which I don’t have and can’t find.
    Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
    POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
    When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
    This will be a huge issue for me if I can’t get this to work.
    Thanks in advance for any suggestions and help! -Rob

    those may be helpful...
    http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
    http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
    Best,
    Howtodo

  • Downloaded OS X but cannot find it on my drive?

    iTunes showed I have downloaded OS X, but I cannot find it on my drive and it won't let me redownload.  Where might I find it?

    Welcome to Apple Support Communities
    The Mac App Store puts the Mavericks installer in /Applications, so open a Finder window, select Applications in the sidebar and you will see the OS X Mavericks installer. Double-click it and install OS X Mavericks.
    If you don't see the OS X Mavericks installer in Applications, make sure there are no external drives connected, because OS X Mavericks may be there

  • Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7.  Do you think this is the reason why my iPad cannot find my wireless printer?

    Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7.  Do you think this is the reason why my iPad cannot find my wireless printer?

    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

  • Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.

  • I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

    I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

    If it is the first CS version then you will need to check out the following.  I believe it applies to CS as well even though it specifies CS2....
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Where can I find a Mac printer driver for the HP LaserJet 1536

    Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

    Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
    Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
    I work on behalf of HP

  • Cannot install Office 2010 on Windows Server 2008 terminal server

    Hello
    I have a Windows 2008 terminal server which has Office 2007 Professional Plus on it. We want to upgrade it to Office 2010 Professional Plus.
    Following steps from Technet, I made sure all users were out of the terminal server, then selected "Install Application on Terminal Server", then ran the setup.exe file for Office 2010.
    The splash screen comes up for Office 2010 but then disappears and the install does not progress, although the setup.exe is still running in Task Manager. The "install Application on Terminal Server" window is still open, waiting for me to click
    Next, Finish or Cancel and nothing else happens.
    I also tried putting the server into install mode from command prompt and rebooting the server and re-attempting but no good.
    How can I go about troubleshooting this issue?
    Many thanks
    Luke Dunster

    Hi Luke,
    Are you  using a volume license version of Office 2010 for Remote Desktop Services/Terminal
    Services? I may be wrong but I think that only this version of Office 2010 will work on a Terminal
    Server. The Retail Version will just not work in this case.
    I had similar problem where I tried to upgrade from Office 2007 to Office 2010 on a Terminal Server (Windows
    2008) but wasn't successful with the upgrade/installation.
    Also take a look at this post: 
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/e09ee781-82c2-4399-85f4-1b90ae690ccb/office-2010-licensing-for-windows-2008-rdsterminal-services-pkc-ok?forum=winserverTS
    Jale01

  • Install GroupWise 7 on terminal server

    After installing GroupWise 7 on a windows 2008 terminal server the first person who logged in name appears for every user who has not logged in. How do we get the name field blank or just come up and ask for the password of the Active Directory user who logged in. Groupwise loads upon windows startup and I cannot find a registry setting or file to modify so that this doesn't occur.

    Originally Posted by kdavisb
    After installing GroupWise 7 on a windows 2008 terminal server the first person who logged in name appears for every user who has not logged in. How do we get the name field blank or just come up and ask for the password of the Active Directory user who logged in. Groupwise loads upon windows startup and I cannot find a registry setting or file to modify so that this doesn't occur.
    Basically clear or fill in the default string value (REG_SZ value) under [HKEY_CURRENT_USER\Software\Novell\GroupWise\Login Parameters\Account Name]
    -Willem

  • "The system cannot find the path specified" error when installing a network printer running Win 7

    Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
    entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
    why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

    Hi JeffWilko,
    What is your current situation?
    To receive better analyzation, please provide more details?
    1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
    2. Check the event viewer and share us the related error log.
    Please take the following steps for troubleshooting:
    1. Ping the printers
    2. Check if there are network firewall to block the access
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Printer Install Issues for HP LaserJet Pro M1212nf Multifunction Printer

    After running the software it keeps telling me install failed check USB, power off then on and try again. I have done all of the troubleshooting methods on your website with no luck. The OS is Windows 7 Enterprise. Any help would be greatly appreciated. 

    @Neogio78
    Thank you for your post on the hp.com forums.
    Couple of questions: how were you originally installing the printer: USB, LAN cable, wirless? Which software did you try to install: Full Solution or the host based driver (basic print driver)?
    My first suggestion would be to uninstall all software and make sure that you delete all the HP folders for this printer from your C:// drive. Reboot your system and try again.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Cannot get printer driver to install on Satellite Pro C660

    tried to install epson rx560 printer (windows 7 64-bit) driver on satellite pro c660 but it fails epson told me to consult a technician as the printer driver is fine
    Any help would be gratefully recieved

    I dont think that this is a notebook issue.
    In my opinion you should visit and check the Epson support page:
    http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-Photo-RX560/Drivers-Support

  • Cannot find printers when printing pdf files

    I cannot find all the printers installed in the PC when printing pdf files.  I have re-installed the printer driver but it still cannot work.  Please help.

    I cannot access 'properties' for my hp1536dnf mfp.

Maybe you are looking for