Cannot find networks after wake from sleep

I cannot find anyone else posting with this exact issue. Ever since the 10.5.8 update, my 13" MB Pro will not see any of the 10 wireless networks around my place. If I turn the Airport connection off and on again, it seems them and immediately connects to my network as well. Yes, I've zapped the PRAM.
Anyone have any experience with this exact issue?

I'm having, I think, the exact same issue. Since installing Snow Leopard, my internet connection is fine while the computer is awake. However, every time I return from shutdown/sleep or restart, I get the message stating "Your chosen network is not available, please choose another" (or whatever the actual wording is). So I click on the network icon and sure enough, my network is in the list, but I have to click and type my password every time. I've been looking into forums and suggested fixes; so far, to no avail.

Similar Messages

Finder stall after wake from sleep w/USB flash drive mounted

Has anyone else experienced this? iMac works flawlessly while USB flash drive is mounted UNTIL iMac sleeps. Then as soon as the iMac wakes from sleep the finder is non-responsive (perpetually spinning beach ball) and other apps slow to a crawl and become non-responsive as well if they need the finder (i.e. to save, etc.). This only happens when the USB flash drive is mounted.
Trying to force quit (relaunch) the Finder does not work, I always have to perform a hard restart.
I have an external FireWire hard drive that works beautifully and does not cause these same symptoms.
Any ideas?

umm.. don't let the computer go to sleep with your jump drive connected? The mac will usually take a few seconds to get his gear together after waking up from a sleep sounds like he is having to gather additional things since the jump drive is in there. I don't have a REAL solution except don't let Mr. Mac sleep with the jump inserted....

My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.

Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?

Wi-Fi?
Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

BUG: Sandisk USB flash drive in "half-mounted" state after wake from sleep

My Sandisk Cruzer Crossfire 4GB Flash Drive is left in a half-mounted state after wake from sleep. The Finder believes the drive is still mounted, the icon is on the Desktop. However opening a file on the drive, or trying to eject the drive, results in a long beach ball, followed by a message that I removed the drive without Ejecting it first. The same drive continues to work fine on my Tiger machine, and on PCs.
Bug Report:
Setup:
Macbook 1st Gen (2.0 Ghz)
Mac OS X Leopard 10.5 Clean Install
Sandisk Cruzer Crossfire 4GB USB Flash Drive (in either port)
Repro:
Plug in the drive.
Close the MacBook to put it to sleep
Reopen the MacBook
Result:
The lights on the flash drive never light back up after wake from sleep. Navigating the drive, or trying to eject it results in a "you removed the device without ejecting it first" message.
Expected:
Drive should still be mounted and accessible after waking back up.

It may be a design flaw in the device. Mac OS X does a lot more power management than most other OSes, including tearing devices down to little or no power during sleep. It is possible that the device simply misbehaves due to corrupted memory state or reports a substantially different GUID or something similarly bizarre upon wake. (Okay, that last one wouldn't technically be a power management issue....)
If it doesn't have any problems except when sleeping the system, I would just make sure I unmounted it before putting the machine to sleep and wouldn't worry about it. Maybe check with Sandisk to see if they have a firmware updater for the device.

Left USB-Port dead after wake from sleep. Just restart helps.

I hoped Apples keyboard-Update today would solve my biggest hate-bug in this buggy POS called Leopard. It didn't.
As usual on my Leopard-Macbook Pro, no device will work on the left USB-Port after I waked the computer from sleep. Just a restart helps. I hoped this update to solve this, because it replaced among others "IOUSBFamily.kext".
Terminal gives a timeout error for the internal USB-Hub after wake from sleep. I assumed this should be related.
I'm really angry now.
When will Apple solve the most urgent problems in Leopard?
Was 10.5.1 just smoke and mirrors to make (fool people into...) people upgrade who intended to wait until the first maintenance-update?
Was Leopard Apples attempt to make Windows-Users more comfortable by putting in some heavy extra-bugs and blue screens?
FIX IT FINALLY! And f... don't wait for Macworld to release 10.5.2. It's desperately needed and the current state of Leopard will leave some people very sad at christmas after getting their first Mac. First impression counts and many more peoples first contact with the Mac will be at christmas...

Apple knows the problem and for some reason they are stumped on fixing it. this is so bad I can't believe it. On my macbook pro with Leopard installed, USB left port is dead after sleep. Only restarting can power it back up. I have to restart every day to use my external hard drive for time machine or when putting my flash drive in the port.
Come on already Apple. This is a SERIOUS, SERIOUS problem.
Fix it.

After Lion upgrade, having network issues after wake from sleep

After upgrading to Lion from 10.6.8 on my MacBook Pro (15-inch, Early 2011), I am unable to connect to the Internet after the computer wakes from sleep. I should rephrase this - I am able to ping IP's and DNS (DNS servers are present) however none of my apps will connect (Safari, iChat, etc) -> they all indicate the Internet is unavailable. I have two Airport Express's running 7.5.2 extending a WiFi network off an Airport Extreme running 7.5.2. This issue is specific to waking from sleep. Any thoughts or suggestions would be appriciated.

It's definitely linked to Time Machine and backups.
I think If I put my machine to sleep/close the lid and Time Machine happens to be performing a backup, when I open the lid again, the network connection is lost and I receive a bunch of errors about the backup disk being unavailable.
This means that if my mbp isn't in the middle of a backup when I put it to sleep, wifi comes back up without a problem.

USB mouse freezes after wake from sleep.

Since the 10.8.2 update my Logitech USB mouse freezes after waking up the computer from sleep or when it goes into energy save from non use. This also happens to my brand new MBPR. I tries repair permissions and reset the smc. Any suggestions?

I get a frozen mouse (Microsoft Intellimouse Optical) on my 2012 Mac Mini running Mavericks (it did it with Mountain Lion also) when waking from sleep about 75% of the time which works again if I unplug/replug it (light is on and mouse buttons work when it's frozen, but the pointer won't move). It does this whether I use a built-in USB3 port, a USB2 hub and now also with my new USB3 hub.
However, my 2008 Macbook Pro also has an Intellimouse connected to it when docked and it NEVER freezes when waking from sleep whether using the built-in USB2 port or a Gmyle USB3 card port. Either way, the mouse wakes fine and it's the SAME MODEL MOUSE and SAME OSX verison. I have no idea why the inconsistency. It ***** because "Wake on Network Activity" FINALLY works right here in Mavericks with XBMC on my Mac Mini so there's a perfect opportunity to save some electricity. I got excited when it woke up two times in a row with 10.9.1 and set up my sleep controls only to find it wouldn't go to sleep with the Energy Savings menu because I have an external USB3.0 3TB media drive connected (at all times). I finally found out (through more patient testing) that once the drive spun down (possibly on its own power saving timer as I'm not sure the "Shut down hard drives when possible" setting works in Mavericks; it was messed up in Mountain Lion in 10.8.4 and even though 10.8.5 fixed it, I'm not sure Mavericks is using the same code. It doesn't seem to shut down any faster with or without the setting on and shuts off several minutes after the computer attempts to go to sleep (on a 1 minute test setting; I think WD defaults to 10 minutes in firmware).
Anyway, once that was resolved and I saw it would go to sleep eventually once the drive spun down (it will sleep instantly if I select SLEEP from the Apple menu which I find odd if it's such a big deal that it's connected....), I thought OH BOY! I'm all set. Then I woke it from that sleep and found my mouse was frozen again..... :-( What a PITA to unplug/plug the mouse every time it wakes from sleep. It's not worth it. I'll just have to pay the extra few bucks in electricity each month I could have saved to avoid such a freaking nightmare hassle. Why on God's Green Earth, Apple CANNOT or WILL NOT fix their darn energy savings features is just beyond me. Instead of spending all their time making horrible horrible ugly icon/GUI updates to iOS and making it slower and slower and slower, why don't they actually fix some darn bugs in OSX for once in their lives.... I'm starting to think I should give Windows another chance I'm so annoyed right now. But then I think about having to run a malware program and have that program update and Windows software/security updates 3x a day and I think I can just deal with the Mini not sleeping.....
I'd like to know why Apple couldn't figure out those of us with multiple monitors would want a dock on BOTH monitors all the time either (first side-mount docks wouldn't migrate and now in 10.9.1, bottom-mounted docks won't migrate here either, leaving a dock on one monitor all the time and if that's the monitor that is showing full-screen video, you lost your dock completely while the video is playing. They finally figured out after a full decade that having a menu bar on both screens would be a good idea, but it just didn't occur to them that the same is true of the dock. How much are they paying these guys? Too much apparently (or is it too little to attract talented thinkers? Nah, it couldn't be since we give them feedback and they just ignore it).

Bluetooth devices lagging after wake from sleep sometimes.

I have the Apple bluetooth keyboard, magic mouse, and magic trackpad. All batteries are charged and I have tried others by the way. This issue only happens sometimes, as it has happened before, but stopped for a few months, and now happened again tonight. What is happening is that my laptop (macbook late 2009 with mac os x 10.7.2) wakes from sleep (all default energy saver settings set and I am able to wake the macbook with any of the bluetooth devices), and my bluetooth devices mentioned above are laggy for about 15-45 seconds. What i mean by laggy is that when moving the mouse across the desk after the login screen is already fully loaded, it jumps and is clearly not tracking like it usually does. The bluetooth trackpad and keyboard experience this same issue.
Now the thing that leads me to believe it's bluetooth or software is that my macbook's built in keyboard and trackpad do not lag and function correctly as soon as the computer is woken from sleep and prompts me with my login screen. This also leads me to assume that it's not my computer running slowly or having too many processes or not enough memory. This problem happens even if I have no programs running (other than OS X's default processes). I have taken my macbook into the Apple genius bar thinking it was a bluetooth hardware issue, but they ran checks and confirmed that it was not and obciously, we could not get the issue to reproduce their at that time. I would love to hear from anyone who has experiecned this before, or is currently. We need to get Apple's attention with this issue because they have not listened to me when I submit a feekback form. This has been happening since 10.7.0 by the way. Thanks and happy holidays.
macbook 6,1
8gb memory
mac os x 10.7.2 (happened on 10.7.0, and 10.7.1)
-I can wake my macbook with my bluetooth devices
-My built in macbook keyboard and trackpad do not experience this issue
-I don't see the "connected symbol" when the computer wake (everything is already connected)
-All default energy saver preferences set
-Using apple's rechargeable batteries for all three devices
-minimal processes running
-devices function as normal after 15-45 seconds (it's not my desk)

I've got what sounds like the same problem with my new unibody MacBook Pro.
I've had the problem with both 10.6.1 and 10.6.2.
I also find that a reboot fixes things. In my case, I can sleep/wake multiple times with
no problem, but once the BT goes unresponsive upon wake, every subsequent sleep/wake
will suffer the problem until I next reboot.
I also discovered that in my case I can re-pair the non-responsive devices (two flavors
of Logitech mice and an Apple wireless keyboard) while in sick-BT mode and they will
work until I next sleep/wake, whereupon they will again fail to connect and my
choice is either to re-pair yet again, or reboot and have the problem go away, at least
for awhile.
I'm trying to correlate my activity with my BT going out to lunch, but have yet to narrow
it down definitively. I have one or two data points that make me suspect it goes south
after I use VMware Fusion (Version 2), but I cannot yet rule that one completely in or out.
/Kevin

Bluetooth Unresponsive After Wake from Sleep

I have an issue where when my macbook pro wakes from sleep, the bluetooth mouse will not connect, and BT becomes unresponsive. Sometimes I can turn bluetooth off then back on and be OK, BUT 95% of the time, I have to restart the computer to get bluetooth back.
After waking, the BT appears to be on, I get the popup on the screen which tells me "connection lost" with a picture of a mouse. I can open BT preferences and turn BT off, but nothing happens. I can even recheck "on" but it is completely unresponsive.
Things tried:
Allow BT to wake this computer is UNCHECKED
in activity monitor I have forced quit BLUED, but BT does not come back.
I have trashed the BT preference file Mac HD/library/preferences/com.apple.bluetooth.plist
I have reset SMC and PRAM
Tried a Logitech V470 and mighty mouse
Fresh install of 10.6.0, then upgraded to 10.6.1, then 10.6.2 (using combo)
Tried disabling steermouse, fresh batteries, holding my mouth right...
When the BT is not responding, the BT name either changes to 2.2.4f3 (which is the Apple BT software version), or it says "name not available".
Also in system profiler, when BT is not responding the BT "Hardware settings" section is missing. It starts with "services".
This is driving me crazy. Could this be hardware related? I feel it is more software, since on restart, the BT mice pair perfectly and work great. The never randomly disconnect.
This issue only happens when the computer resumes/wakes from sleep.
Everyone please provide feedback. I am the only one with this issue? I have scoured the net, and find very little regarding this exact issue. I am within my 90 days from buying, should I call Applecare or is it a waste of my time?
Thanks for your help,
Jeff
Spec's:
mid-2009 aluminum uni-body, Intel 2.66Ghz, 4GB Ram, 320GB HD
Snow Leopard 10.6.2 (Clean install to 10.6, then upgraded)
Login items: Steermouse, PleaseSleep, and Windows Live Sync
Also running at startup, but not in Login items: Paragon NTFS, Flip4Mac,
MacFuse, LogMeIn

I've got what sounds like the same problem with my new unibody MacBook Pro.
I've had the problem with both 10.6.1 and 10.6.2.
I also find that a reboot fixes things. In my case, I can sleep/wake multiple times with
no problem, but once the BT goes unresponsive upon wake, every subsequent sleep/wake
will suffer the problem until I next reboot.
I also discovered that in my case I can re-pair the non-responsive devices (two flavors
of Logitech mice and an Apple wireless keyboard) while in sick-BT mode and they will
work until I next sleep/wake, whereupon they will again fail to connect and my
choice is either to re-pair yet again, or reboot and have the problem go away, at least
for awhile.
I'm trying to correlate my activity with my BT going out to lunch, but have yet to narrow
it down definitively. I have one or two data points that make me suspect it goes south
after I use VMware Fusion (Version 2), but I cannot yet rule that one completely in or out.
/Kevin

Connection Lost After Wake From Sleep

I am using a Macbook Pro and Linksys WRT150N W/L router. Every time my MBP wakes from sleep, I lose my internet connection. My menu bar still shows that I'm connected to the network, but I lose all connectivity. I cannot connect to internet or my router settings unless I do a complete restart. Network preferences shows connected to network but no connection to my router IP address under TCP/IP tab in the advanced settings. I also have a drop out of signal a few times an hour. My iMac DV does not experience the drop outs or connection loss at anytime. I have reset my router numerous times and used default factory settings all with the same results. Does anyone have an idea what the problem may be? Thanks.

I was always experiencing drop outs as far as what my signal was showing in my menu bar. It would drop out even if I was on top of my router. I had upgraded to 10.4.11 and the day after I did that, the problems started. I thought I might as well upgrade to 10.5 to see if that might help it. I think the 10.4.11 had done something to my W/L card and upgrading to 10.5 wouldn't have helped it unless I upgraded from 10.4.10 to 10.5, skipping 10.4.11 all together. I'm gonna bring my router and MBP into the genius bar and see what they can tell me about. Thanks for replying. I'm glad and sad to hear that I'm not the only one experiencing these symptoms.

Crashes after wake from Sleep after 10.8.1 update

2.5 Ghz Mac Mini (mid 2011), 8 Gigs of RAM
Since the day I upgraded to 10.8.1 I have had persistent crashes, 1 every 24 hours or so. It's always shortly after a wake from sleep. In all cases, it is impossible to switch to a random open application. But once I hit that application, no other application will respond to anything, including a Force Quit, or if it will force quit, it won't relaunch. A shut down will hang because an app refuses to quit. I can quit the Finder, but it won't relaunch. Have reinstalled Mountain Lion twice, zapped the PRAM, reset the SMC, checked and extensively tested the HD and RAM. Replaced RAM with original Apple RAM. Didn't help, so I swapped back to the RAM from Crucial. I can't think of anything else to try. Machine does not crash unless it has been asleep. Runs flawlessly when sleep is disabled. After a reboot (usually via a shut down via the power switch, start from scratch, check of the HD integrity, and then a clean restart) the machine will run fine, sleep and wake normally for about 24 hours. As near as I can tell from the logs, the hangs usually begin right after the Time Machine Backup after a wake from sleep finishes. If I don't allow the machine to sleep, there are no problems of any kind. Making me crazy. Did not occur under Lion or the .0 version of Mountain Lion. Is making me crazier than I normally am which is sorta serious.

Any solutions to this problem? I too have this kernel panic, however it only happens about once a week. Always upon wake from sleep as you've indicated.
FYI I don't have intego software, or an APC installed. Nor am I using filevault.
This is on an up to date, MacBook Pro Retina.
Robert

Yosemite frozen for a few seconds after wake from sleep

So I open up the lid of my late 2012 Macbook Pro Retina and I instantly see whatever it was I was seeing before closing it, but I can't do anything for anywhere between 3 and 10 seconds... The problem exists whether my Macbook goes to hibernation or not (my sleep delay is set to a loooooong interval). I've already tried PRAM and SMC reset, tried a fresh install of Yosemite from recovery, etc. Nothing seems to change this behaviour. Maybe this problem is just too high profile and I'm whining about non-issues here, but this hasn't ever happened before, on any other Mac OS version I've ever had. And quite frankly, that sweet instant wake-from-sleep is something I was always proud of as a mac user. ;-) Now my mac is starting to behave like every Windoze version... ever! What gives?!
(PS: I have a Transcend JetDrive 720 480GB upgrade built in but the problem existed before the upgrade. And I'm running Yosemite 10.10.3 but that upgrade also had no impact on the issue.)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1307 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %d more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'size (B): %d\n    '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt|xpc)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt|xpc))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ .+:/||!b) b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/://;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics codesign );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '/A* -type d -name *.app -prune ! -user 0' -vv );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages Modifications );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;A1 4 88;D5 77 44 89;D4 7 11 6;D0 0 N1+18 109;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

10.9.4 update causing internet browsing errors after wake from sleep

Macbook Pro Late 2011, OS X 10.9.4
So before the 10.9.4 update, I had no problems with Wifi and wake from sleep.
Now, after the update, random web pages either don't load (Chrome & Firefox) or return a "Memory Not Allocated" error (Safari). Also, my Work VPN application stops being able to connect. The related Console error is:
acvpnagent[104]: Function: getInterfaces File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1277 missing PPP destination address for interface "utun0"
The only solution I've found is restarting.
Any ideas?

Remove the Cisco VPN client. Use the built-in client, if possible.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Abnormal Start-up Screen Appearing after wake from Sleep Restart

I have started to have this problem with my MacbookPro where I will come back and wake try and wake from sleep and nothing. The computer is off or unresponsive. Upon restart I get an abnormal start up screen which looks like this image that I snagged with my camera:
http://www.creativetantrum.com/screen.jpg
In all my years of using a Mac I have never seen anything like this. And the MBP never gets pass the screen I have to hard restart and it launches into this screen:
http://www.creativetantrum.com/startup.jpg
and runs through to the login screen.
Previously I have tried resetting the PRAM and SMC(?) as well as running Cocktail on the machine. Those sequences seemed to resolve the issue for at least a day. The only thing I have done that I can think may have caused this is I play a game called "Ouba" that runs in 640 x 480 or some low resolution that the MBP seems to resemble upon restart.
Also upon restart I am given an opportunity to send Apple a message regarding the crash. Here is what it sends:
panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x5f5e1a64, CR3: 0x01334000, CR4: 0x000006e0
EAX: 0x00006739, EBX: 0x0040d4c1, ECX: 0x00000320, EDX: 0x00006720
CR2: 0x5f5e1a64, EBP: 0x47e93b58, ESI: 0x5f5e1a64, EDI: 0x00000006
EFL: 0x00010006, EIP: 0x0037f240, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x47e93888 : 0x128d0d (0x3cc65c 0x47e938ac 0x131f95 0x0)
0x47e938c8 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
0x47e939d8 : 0x19b3a4 (0x47e939f0 0x0 0x47e93a08 0x131f48)
0x47e93b58 : 0x37f719 (0x109380 0x5f4e6000 0x0 0x9)
0x47e93c18 : 0x1ac378 (0x3190ca1e 0x2304 0x0 0x120)
0x47e93c48 : 0x61a3ce (0x61a1ae 0x3 0x64b160 0x0)
0x47e93ca8 : 0x60f446 (0x65d8600 0x2 0x47e93c7c 0x0)
0x47e93cc8 : 0x3ac373 (0x6632300 0x4b063c 0x3 0x4ef000)
0x47e93d08 : 0x3bb728 (0x65d8600 0x3f2688 0x6608f48 0x3920b5)
0x47e93d48 : 0x394a8f (0x6608b00 0x4 0x1d 0x2)
0x47e93d88 : 0x394fc5 (0x6608b00 0x0 0x47e93dc8 0x0)
0x47e93da8 : 0x395ea4 (0x6608b00 0x654fc00 0xb 0x1)
0x47e93de8 : 0x394fee (0x6608b00 0x6651780 0x47e93e28 0x0)
0x47e93e08 : 0x395ea4 (0x6651a80 0x654fc00 0xb 0x1)
0x47e93e48 : 0x394fee (0x6651a80 0x6695200 0x47e93e88 0x0)
0x47e93e68 : 0x395ea4 (0x6695e80 0x654fc00 0xb 0x1) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleACPIPlatform(1.0.10)@0x60e000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5fa000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x60a000
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 1.5 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
Any help would be fantastic.
Thanks.

the settings are done via Terminal commands or through a widget (i know there is "deepsleep" and i think another)
you should be able to find the terminal command through reading about the different sleep modes, if not try goggling "changing sleep mode on mac" and that should show you. if you cant find it let me know and ill try to dig it back up.
the MBPs are standard with safe sleep, the older lap tops used quick sleep. there is not way to change them through the standard system in a GUI, it has to be done via code (very easy because you can just copy and paste it in)
-matt

No IPv6 after wake from sleep

Hello,
     When my MB pro wakes from sleep there is no IPv6 connectivity. In order to restore IPv6 I need to stop/start the Thunderbolt Ethernet adapter (make service inactive/make service active) or reboot.
     Details on my configuration:
     OS X 10.9.2
     Thunderbolt Ethernet Adapter used for network connectivity (Wi-Fi OFF)
     Native IPv6 network (not tunneled)
     IPv6 and v4 manual config (no DHCP or SLAAC)
     Dual stack TCP/IP configuration
     IPv4 works
     IPv6 works until MB goes into sleep mode
ifconfig
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
          ether a8:20:xx:xx:xx:xx
          inet6 fe80::aa20:xxxx:xxxx:xxxx%en2 prefixlen 64 scopeid 0x4
          inet6 2001:xxxx:xxxx:1::2 prefixlen 64
          inet 8.x.x.2 netmask 0xffffffc0 broadcast 8.x.x.63
          nd6 options=1<PERFORMNUD>
          media: autoselect (100baseTX <full-duplex,flow-control>)
          status: active
^---- Looks good (to me).
netstat -nr -f inet6
Internet6:
Destination                             Gateway                         Flags         Netif Expire
default                                 2001:xxxx:xxxx:1::1             UGc             en2
::1                                     ::1                             UHL             lo0
2001:xxxx:xxxx:1::2                     a8:20:xx:xx:xx                  UHL             lo0
fe80::%lo0/64                           fe80::1%lo0                     UcI             lo0
^--- This looks good too (to me).
Ping my Thunderbolt Ethernet Adapter
PING6(56=40+8+8 bytes) 2001:xxxx:xxxx:1::2 --> 2001:xxxx:xxxx:1::2
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=0 hlim=64 time=0.129 ms
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=1 hlim=64 time=0.233 ms
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=2 hlim=64 time=0.225 ms
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=3 hlim=64 time=0.227 ms
^--- Yay!
Ping the default route
PING6(56=40+8+8 bytes) 2001:xxxx:xxxx:1::2 --> 2001:xxxx:xxxx:1::1
ping6: sendmsg: No route to host
ping6: wrote 2001:xxxx:xxxx:1::1 16 chars, ret=-1
ping6: sendmsg: No route to host
ping6: wrote 2001:xxxx:xxxx:1::1 16 chars, ret=-1
ping6: sendmsg: No route to host
ping6: wrote 2001:xxxx:xxxx:1::1 16 chars, ret=-1
^--- Boo
This causes problems for IPv4 as well because apps like Firefox and Safari try using the IPv6 DNS servers and give up before falling back to the IPv4 servers. So this problem breaks more than IPv6.
Is this a bug or do I have something misconfigured?
Thanks.
                               --Tom

I see this (sort of) behaviour as well. When I look into the tcp/ip tab of the network (system prefs) I see
fe80::1:1 as router, that is why v6 stops working. After turning v6 off and on again the correct router IP appears.
NB. this is on wifi
Rudi

Cannot find networks after wake from sleep

Similar Messages

Maybe you are looking for