Cannot find older CAN-2.0 .vi's in labview 2009

Hi,
I'm trying to use a (rather old) Series 1 PCMCIA-CAN/2 card in Labview 2009.
I've installed latest NI-CAN driver that supports this old card (NI-CAN 2.0, I think), but I don't see any of the can.llb vi's in the functions palette. The CAN-2.0 documentation says it supports Labview versions "6.1 and later".
Will Labview 2009 support this driver? How do I get CAN-2.0 vi's to show up in the function palette?
Thanks,
Phil (labview newbie)
Message Edited by phil___ on 01-30-2010 03:09 PM
Message Edited by phil___ on 01-30-2010 03:10 PM
Solved!
Go to Solution.

I found the relevant .vi's in the "Labview 6.1/vi.lib" folder of the "National Instruments" directory.
The vi's I was looking for now show up in the addons section of the function pallette.
Thanks,
Phil

Similar Messages

IPhoto cannot find older pictures in hi res

After recent update(s) iPhoto '11 cannot find older photos in hi res. The thumbnails are still there but the original photos are not. At least not visible for iPhoto. Where do I find them? It doesn't help trying to use other libraries. Finder shows two identical iPhoto Libraries but none of them contain hi res pictures.

That seems to suggest the possibility that the iPhoto preferences were set to run as a "referenced" library during that time?
If you have the names of some of them you can try searching for them using Find Any File. FAF can search areas that Spotlight can't, like in packages, invisible folder, etc.
Run a search on your boot drive first. If no full sized photos with that name are found change the searched drive to your Time Machine drive and try again. This search will much longer than on your boot drive do to the TM organization.
This can tell you if there's any copy of that photo in your TM. If not there's nothing you can do. .
OT

HT4623 i updated my IOS 5 to 6 but still i cannot find siri. can someone help?

i updated my IOS 5 to 6 but still i cannot find siri. can someone help?

ok thanks for that, but when downloading it was mentioning Siri as a part of the update.
so it's just a message but not applicable for iphone 4?

I have an old iPod classic that iTunes cannot find, I can't even restore it!?

I have an old iPod Classic that iTunes cannot "find" even though it shows it. I can't even restore it. Works fine except can't synch with iTunes to add new music!?

We (Appple techs) tried disk mode and that didn't work. At times the iPod would even "show" itself in iTunes and iTunes would say it was synching but when you looked at the iPod you could tell it wasn't ( it just said do not disconnect) and after 10 to 40 minutes later iTunes would say can't find iPod. We would then have to force quit iTunes because it was hung up and then just disconnect the iPod. The iPod works fine with headphones or a docking station, just can't add (or subtract) anything to it. It completely mystified all the techs in the store and all "senior" advisors on the phone- and that was about 4.5 hours getting tossed to one "expert" or another! Ah well, indeed stranger than life.

"/usr/bin/ld: cannot find -luu" - can't compile kl

I'm trying to make a package for klibido ( http://klibido.sourceforge.net/ ).
I keep having this error when I try to compile it :
/usr/bin/ld: cannot find -luu
Does anyone know this problem ?
Thanks !

I made a package for uudeview and I installed it.
It's in /usr.
Here is the full error message :
/bin/sh ../libtool --silent --tag=CXX --mode=link g++ -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -march=i686 -O2 -pipe -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -L/lib -luu -o klibido -R /opt/kde/lib -R /opt/qt/lib -R /usr/X11R6/lib -L/usr/X11R6/lib -L/opt/qt/lib -L/opt/kde/lib main.o klibido.o grouplist.o serverslist.o newsgroup.o addform.o headerlist.o binheader.o header.o hlistviewitem.o nntpthreadsocket.o queueparts.o qmgr.o addserver.o prefgeneral.o prefdialog.o globals.o availablegroups.o updatedb.o fileviewer.o progress.o prefdecode.o downloadselect.o catman.o prefview.o prefheader.o decoder.o uudecoder.o yydecoder.o updopt.o nzbform.o groupWidget.o serversWidget.o NewsGroupForm.o qmgrform.o serverdlg.o prefgenerallayout.o progressdlg.o prefdecodelauyout.o downloadselectdlg.o catmandlg.o prefviewlayout.o prefheaderlayout.o updoptdlg.o addformdlg.o nzbformdlg.o availablegroups.moc.o queueparts.moc.o -ldb_cxx -lkmdi -lkdeui -ldb
/usr/bin/ld: cannot find -luu
collect2: ld returned 1 exit status
make[2]: *** [klibido] Erreur 1
make[2]: Leaving directory `/var/abs/local/klibido/src/klibido-0.2.2.2/src'
make[1]: *** [all-recursive] Erreur 1
make[1]: Leaving directory `/var/abs/local/klibido/src/klibido-0.2.2.2'
make: *** [all] Erreur 2
==> ERROR: Build Failed. Aborting...

I have an older version of OSX ,I want to update versions but it keeps telling me I need OSX 10.9 yet i cannot find it can you help

I wish to update my macbook book. every time I try to update the software it asks for OS X 10.9
where do I find this version Of OSX

You first must upgrade to Snow Leopard. And, your computer must meet the requirements for both Snow Leopard and Mavericks.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

I downloaded my apps from my iPad onto my new iMac, but i cannot find them, can you please tell me where I can access them. I have tried finder, and launchpad but to not avail

I downloaded all my apps onto my new imac from my ipad, but i cannot access them , i dont know where they are. If I try to download them again, it says already downloaded. Can you help please.

Hi Tykie,
If you have transferred or Downloaded iPad Apps on your Mac you will find them in iTunes on your Mac....
Open iTunes and in iTunes on left hand corner where Music is return you should see a drop down button next to it and once you click on that drop down button you will see Movies/Tv Shows/Applications, you need to select Applications here and you will find all your downloaded iPad Applications. And as they are made only for iOs devices that cannot be run on your Mac.
Hope this will help you

Cannot find older flex SDK Installs

Please can someone tell me where i can find the Flex SDK
2.0.1 install.
The documentation here references it, but the FDS 2.0.1
installer is not available.
http://www.adobe.com/support/documentation/en/flex/2/install.html
I tried FTP'ing to the macromedia FTP server looking for
older versions, but i could not login.
If anyone has a link to archived version of the software,
please post.
Note, that i do not want the HotFix 1/2/3 packs, i just need
the 2.0.1 without hotfixes,
Thanks
Mick

You won't find the source .as files which is what it sounds like you are searching for. The SDK distribution has everything compiled and packaged up into libraries. The source is available in the SDK's SVN repository.

HT5012 When I try to look at my groups the members are shown but it says cannot find page, can anyone helo please?

When I try to look at my groups it shows the members but says page not found, can anyone help please?

I dont understand the answer
'''''""The problem can be solved by opening FF and choosing Tools...Add On's...select the SEARCH addon and choose UNINSTALL...restart FF browser when asked, then reload Mobsters. This worked for me. The suggestion on the 404 that says to remove Search via Add/Remove Programs is completely BS, as Search doesnt show there. ""'''''

Trying to attach my time capsule to my cable modem box, which is a Virgin media Scientific Atlanta box. Problem is the apple set up tells my to put in the IP address for the virgin cable modem, which I cannot find. Can any on assist?

can any one help with is problem.

In what screen of what application are you asked to enter that IP address? The only place I'd expect to see such a prompt is to let AirPort Utility access another AirPort base station. Your Scientific Atlanta box isn't one.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Can i build an application with Labview 2009 for Windows 7?

Hello
i use Labview 2009 SP1 and the application builder 2009 SP1. If i install the application on win7 this message is display:
Labview Run Time Engine depends on pruduct with upgrade code (...) version 9.0.301, language {} which is not in distribution.
Solved!
Go to Solution.

Is this an issue with Windows 7 having both installation folders for 32 bit (C:\Program Files (x86)) and 64 bit (C:\Program Files)?
I had an application built on an XP machine and installed on a Windows 7 machine which was looking for files in C:\Program Files when they were actually installed in C:\Program Files (x86) - because it was 32-bit application. After installation I had to move the files from 1 location to the other to make it work.

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

I can't find older emails in my Yahoo account or iPhone app BUT I am able to see them on my Mac Mail version of email. sent emails are OK.

... for the past few months i have noticed that emails in my inbox Yahoo mail account older than a few weeks keep disappearing. i cannot find them in my Yahoo account or iPhone app BUT i can see them on my Mac Mail version of email. Emails that i have stored into folders in my yahoo account are still there... same with my sent emails... it's just the Inbox emails.. strange, very strange. I don't know how to 'move' the emails from my Mac Mail back to my Yahoo account.

Please read and begin using Can receive email, but not send email. I had a similar issue with Comcast mail (could receive by not send) and found my answer in this letter. For me it took resetting the outgoing mail and telling the system to use a password when sending outgoing mail. If you need help with that please advise and I'll tell you where to look.

After installing firefox version 31 I keep getting error messages that firefox cannot find some servers. How can this be fixed?

I use Ebates. Now when I go to Ebates and choose a store, then the transfer to store website comes up and then an error message that firefox cannot find the listed server. I keep getting that message alot.
On the frontier homepage there is an error message that firefox cannot find the ad server for yahoo.
I was having problems with firefox so I did a reset firefox and then installed the new version 31.
Seems it might be draggy or slow/sluggish. I like using Ebates. I contacted them and they said they were not having any issues at the moment. I contacted my antivirus provider and they said they could not detect anything either. Would a system restore get me back to the older version?

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Cannot find older CAN-2.0 .vi's in labview 2009

Similar Messages

Maybe you are looking for