Cannot find "Products.jar" when intalling ODBC for 10g

The intall directions say to point to the path where Products.jar file is located after unziping the download. I see Products.xml but no Products.jar file. I am unable to install ODBC.

Hi Jon,
Were you able to successfully create an ODBC DSN entry using 10.1.0.3.1 driver?
I installed the Oracle ODBC Driver 10.1.0.3.1 using the Oracle Universal Installer v10g. I also couldn't find the Products.jar file, so I selected products.xml file. The OUI said installation was successful.
However, when I go to ODBC Data Source Administrator and try to add a new entry, it GPFs.
Then I tried uninstalling the 10.1.0.2 driver, but it still doesn't work.
Any hints?
Thank you in advance!

Similar Messages

OUI cannot find "products.jar".

In installing Oracle 9i, I am getting a message at the "File Locations" screen saying that it could find the "products.jar" file that is needed to identify the products that will/should be installed. Has anyone encountered this problem? Oh, and by the way, if anyone is having trouble getting the "setup.exe" file to work, your Disk# directories have to be directly under the C:\ drive.

During the OUI: Specify File Location
The Destination Name/Path should be unique, should not be the same as the Oracle DB Home name and path.

I've seen all the posts for fixing the wifi on the 4s, none of them work! So, who can tell me why my iPhone 4S cannot find any wifi when it used to easily, and when it does it can never connect?

I've seen all the posts for fixing the wifi on the 4s, none of them work! So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect? You think apple would have a clue how to fix it! Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...

Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

Hi, cannot find SP3 on support web site for BO XI 3.1

Hi,
I cannot find SP3 on support web site for BO XI 3.1even though it is specify on the home page under download installation Business Objects enterprise XI 3.1?
is it available? someabody can help me to find it out somewhere?
thank you
S

Hi Simon,
The SP3 is still unavaiable, but you can download the latest fixpack 2.7 in the service market place.
All the fixpack and servicepack under the same product version should under the same place in SMP.
Regards

I cannot find how to change the language for labels in a quiz

I cannot find how to change the language for labels in a quiz

You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

Fireforx cannot find web page when the page address is correct

How do I solve the message that Firefox cannot find the page when the page address is correct?

Do you want to do a Google search instead?
You can check the <b>keyword.enabled</b> on the <b>about:config</b> page and if necessary then you can toggle this pref to true via a double-click.
*https://support.mozilla.org/kb/Location+bar+search
See also:
*http://kb.mozillazine.org/Error_loading_websites

KDC Event ID 29 - The KDC cannot find a suitable certificate to use for smart card logons...

I am getting the event (below) every day on a new 2008 domain controller that I brought up recently. The DC has a domain controller certificate, that was automatically issued by an online enterprise CA. This CA is located in another domain (child domain) within the same forest. The 2008 DC is in the top-lvel domain. None of the other domain controllers , which are 2003, are reporting this message. I ran certutil.exe, and it successfully verifies all domain controller certificates, including the certificate on my new 2008 DC. Any ideas why these messages continue to appear?
The Key Distribution Center (KDC) cannot find a suitable certificate to use for smart card logons, or the KDC certificate could not be verified. Smart card logon may not function correctly if this problem is not resolved. To correct this problem, either verify the existing KDC certificate using certutil.exe or enroll for a new KDC certificate.

Hi,
I have checked the file. Here is my findings:
1.    The computer name of the domain controllers are different in this dcinfo.txt file. There is no Swampoak. I would like to confirm which one is Windows Server 2008 domain controller.
2.    The domain controller Buckeye and Madrone both have 2 KDC certificates, one is expired and the other one is valid:
*** Testing DC[0]: MADRONE
** KDC Certificates for DC MADRONE
Certificate 0: -à Valid
Serial Number: 116bbdd90000000000b6
Issuer: ***
NotBefore: 12/15/2008 2:28 AM
NotAfter: 12/15/2009 2:28 AM
Subject: CN=madrone.****
Certificate Template Name (Certificate Type): DomainController
Non-root Certificate
Template: DomainController, Domain Controller
Certificate 1:   --à Expired
Serial Number: 15c2f00b000000000028
Issuer: ****
NotBefore: 3/9/2007 3:05 PM
NotAfter: 3/8/2008 3:05 PM
Subject: EMPTY (DNS Name=madrone.****)
Non-root Certificate
Template: DomainControllerAuthentication, Domain Controller Authentication
*** Testing DC[1]: BUCKEYE
** KDC Certificates for DC BUCKEYE
Certificate 0: -à Expired
Serial Number: 15c4ddc2000000000029
Issuer: *****
NotBefore: 3/9/2007 3:07 PM
NotAfter: 3/8/2008 3:07 PM
Subject: EMPTY (DNS Name=buckeye.****)
Non-root Certificate
Template: DomainControllerAuthentication, Domain Controller Authentication
Certificate 1: -à Valid
Serial Number: 115f34ec0000000000b4
Issuer: ****
NotBefore: 12/15/2008 2:15 AM
NotAfter: 12/15/2009 2:15 AM
Subject: CN=buckeye.****
Certificate Template Name (Certificate Type): DomainController
Non-root Certificate
Template: DomainController, Domain Controller
Suggestion:
1.    Please delete the expired certificate and then reboot the domain controller and test the issue again.
2.    If the issue persists, please request a new Domain Controller Authentication certificate on the domian controller and check the result.

TS3988 i cannot find my device when i go to find my iphone

cannot find my device when i go to find my iphone on my mac

it sounds like you need to sync your iphone with itunes bob. can you explain how the 3 store in warrington,comes into syncing your phone?

Error "The System cannot find the specified" when installing XI3.1 FP1.3

Error "The System cannot find the specified" happened when installing XI3.1 FP1.3 to client machine, however the installation is OK to server.
After the error, go to Control Panel -> Add or Remove Programs, and observe.
BusinessObjects Enterprise XI 3.1 Client Tools is installed,
but BusinessObjects Enterprise XI 3.1 Client Tools Japanese Language Pack is not.
And Language Pack install log is not written.
The same error happened when installing .net2.0.
The installation for FP1.2 is OK.
Would you tell me what reason probablely this issue is?
Thanks.

Hello Sarah,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Help - cannot find digital copy movie on iPad for flight tomorrow

Ok. I'm not apple intelligent... But I do OK. Flying with my 2, 3 year old and 5 month old alone.... I purchased the blu-ray combo pack today of despicable me for the kids tomorrow on the plane! I only have my iPad.... So I downloaded iTunes onto my parents computer, authorized it, loaded the digital copy into iTunes (shows up and plays from computer) and synced without problems....so I thought. I cannot find the movie anywhere on my ipad2 tho! I can only find options for songs and some TV programs we have from iTunes. The only videos in the Video option are music videos that came with a CD purchase. HELP QUICK PLEASE! The insert with the movie says it is compatible with iTunes and Apple devices/mobile devices?

Ok. Only music videos shows up on the videos options. I tap all around and no other options. I looked in advanced options and the iPad/iPod option is greyed out.
Think my iPad synced to my computer.... So for me to sync my computer to my iPad (as in just the movie...) it will erase everything? I feel like I should be ale to drag it over, but I get a red no circle when I try that......

Cannot find symbol error when compiling from cmd

When compile and running program from Eclipse 3.3 everything works fine, but when trying to compile from cmd I get this error:
C:\TEMP\1>javac A.java
A.java:38: cannot find symbol
symbol : class SwingWorker
location: package javax.swing
import javax.swing.SwingWorker;
^
A.java:48: cannot find symbol
symbol : class SwingWorker
location: class A
class Task extends SwingWorker {
^
A.java:109: cannot find symbol
symbol : method addPropertyChangeListener(A)
location: class A.Task
task.addPropertyChangeListener(this);
^
A.java:110: cannot find symbol
symbol : method execute()
location: class A.Task
task.execute();
^
java -version get back: java version "1.6.0_14"....
now, if i copy .class file that Eclipse made and just execute thet .class file from cmd everything works fine.
here is the code, but i think that problems is somwhere else. i tried to serach on google, but... :(
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.Insets;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.beans.PropertyChangeEvent;
import java.beans.PropertyChangeListener;
import javax.swing.BorderFactory;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.SwingWorker;
public class A extends JPanel implements ActionListener, PropertyChangeListener {
    private JProgressBar progressBar;
    private JButton startButton;
    private JTextArea taskOutput;
    private Task task;
    class Task extends SwingWorker {
         * Main task. Executed in background thread.
//        @Override
        public Void doInBackground() {
             System.out.println("test");
            return null;
         * Executed in event dispatching thread
//        @Override
        public void done() {
            Toolkit.getDefaultToolkit().beep();
            startButton.setEnabled(true);
            setCursor(null); //turn off the wait cursor
            taskOutput.append("Done!\n");
    public A() {
        super(new BorderLayout());
        //Create the demo's UI.
        startButton = new JButton("Start");
        startButton.setActionCommand("start");
        startButton.addActionListener(this);
        progressBar = new JProgressBar(0, 100);
        progressBar.setValue(0);
        progressBar.setStringPainted(true);
        taskOutput = new JTextArea(25, 50);
        taskOutput.setMargin(new Insets(5,5,5,5));
        taskOutput.setEditable(false);
        JPanel panel = new JPanel();
        panel.add(startButton);
        panel.add(progressBar);
        add(panel, BorderLayout.PAGE_START);
        add(new JScrollPane(taskOutput), BorderLayout.CENTER);
        setBorder(BorderFactory.createEmptyBorder(20, 20, 20, 20));
     * Invoked when the user presses the start button.
    public void actionPerformed(ActionEvent evt) {
        startButton.setEnabled(false);
        setCursor(Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
        //Instances of javax.swing.SwingWorker are not reusuable, so
        //we create new instances as needed.
        task = new Task();
        task.addPropertyChangeListener(this);
        task.execute();
     * Invoked when task's progress property changes.
    public void propertyChange(PropertyChangeEvent evt) {
        if ("progress" == evt.getPropertyName()) {
            int progress = (Integer) evt.getNewValue();
            progressBar.setValue(progress);
//            taskOutput.append(String.format("Completed %d%% of task.\n", task.getProgress()));
     * Create the GUI and show it. As with all GUI code, this must run
     * on the event-dispatching thread.
    private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame("Veritas Backup");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        JComponent newContentPane = new A();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
         javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}thank you very much!!!!

Perhaps you are running an older version of javac. What do you get with "javac -version" or try compiling with the full path to jdk 1.6.0_14/bin/javac.

Cannot find entry 'SOAP_DOC_LITERAL' when import PublicReportService wsdl

Hi,
when i when import PublicReportService_v11.wsdl from BIP 10.1.3.4.2, i get the following error msg:
Cannot find entry 'SOAP_DOC_LITERAL' in the bounded picklist for the field 'Protocol' in integration component 'Repository Port'(SBL-EAI-
04401)
I want to integrate BI publisher for Siebel 8.1.1.6 to generate a report.
I followed the following references:
http://docs.oracle.com/cd/E14004_01/books/Reports/ReportsIntegrate6.html#wp575974
http://siebel-essentials.blogspot.com/2010/01/siebel-811x-and-bi-publisher-part-1.html#axzz1vaWerxQa
Thanks

Hi, WSeibel
I followed the steps Doc ID 1076412.1,
it said
This problem was solved after defining in the Mobile Client view -> field "Language(s)" the language ENU and the other one being used.
Then the database was re-extracted and it was possible to import the WSDL in the local database using Tools.
but my issue is not solved well.
I decide to reinstall Siebel Tools now, and have a try again.
Thanks,
Zhaoqiang

Simply cannot find product key code or anything

this is all i have in my email.. no key code no restration anything.. please help me out i've tried everything.. cannot find code.. i've even went back to the apple site and looked at my order and nothing.. someone help me...:) please
WEB ORDER NUMBER: ******
CUSTOMER INFORMATION
Richard Carr
*******1788 daytime
*******@hotmail.com
PURCHASE INFORMATION
ORDER
Part Number: *****
Product Name: QuickTime 7 Pro for Windows
Unit Price: $29.99
Quantity: 1
Net Price: $29.99
Estimated time to ship: Now
ORDER SUBTOTAL: $29.99
ESTIMATED TAX AMOUNT: $1.72
ESTIMATED ORDER TOTAL: $31.71
Promotion Savings are subject to verification.

Company purchased this software in 2012 and never installed it. I opened the sealed package this morning. I also have the receipt. Package contains one DVD. I tried to install the software and it asks for my serial number. The only number I have is a sticker that is on the back of the box and it contains 3 letters/3 letters and an 8 digit number. There are not enough fields to enter the numbers and it will not let me type the letters. I thought this may be a redemption code but the number of fields is different for that too. I would love to talk to someone on the phone but cannot find a support phone number. I tried using chat but that is not activated. Can someone help me?

Cannot find java.exe when executing Sun Java Enterprise 8.1

I downloaded and installed Sun Java Enterprise 8.1 (actually because I kept getting not enough space messages I downloaded it in 3 parts). When attempting to execute by clicking on the icon I keep getting a message saying "cannot find java.exe". I previously installed the java runtime successfully. Is anyone familiar with this and if so how do I get around it. I am running Win2k SP4 on a laptop. Thank you for any insight you can provide.

Hi,
I faced same problem. I had jdk 1.5.0_05 installed on C: drive directly. But When I check the log though the installation found the version it was assuming it to be at 'C:\Program Files\Java' so even after finding the installed JDK it was failing. When I copied the JDK at 'C:\Program Files\Java' and then uninstalled and reinstalled the Sun java studio 8 again, at this time it asked me about which JDK to use! Then there I could point to C:\jdk1.5.0_05. Then everything went through fine. I guess this is some problem in installation code. Try this out.

"cannot find songs online" when trying to play/import from cd.

When trying to play/import a cd I get "cannot find songs online" message. Only Track # & time are displayed. When trying to get cd info I get "not registered for online use" message. Never did this before. Thanx in advance for any help.

The "not recognized for on-line use" error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12 (though the number of reports has reduced significantly since 12.1 was released). A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. I don't have a Vista system to check whether its different, but you may need to:
Select Start > Control Panel > Appearance and Personalization
Click Folder Options
Select the View tab
Under Advanced Settings, click Show hidden files and folders, then click OK.
Without this you won't see the AppData folder in C:\Users\username\.
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure.
If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

Cannot find "Products.jar" when intalling ODBC for 10g

Similar Messages

Maybe you are looking for