Cannot find repeating Calender Event

I had set up a repeating alarm last month to remind me once a month at 10 am. I noticed the indicator showing the 10am alarm would show on my clock screen every day, but never went off. The alarm finally went off today at 10am, and showed the description I had typed. But i still cannot find the event in my calender. I have tried in every view, and made sure all the calenders are shown, and the associated emails still listed on my BlackBerry Tour 9630 (including resending the service books).
Can someone please help? (already tried battery pull)

Similar Messages

Cannot find my calendar events older than one year. Where are they ad how do I get them back?

I cannot find my old events on iCal. It seems it only goes back one year. How can I find them and recover my information and events going back further than that?

Greetings,
Sorry to hear about the missing data.
If you don't see your events there are 2 possibilities:
1.) There is something wrong with the calendar cache
2.) The events have been deleted
First go to iCal > Preferences > Advanced > Delete events.. -- see if this has been checked as this deletes events after a point in time you specify. Even if this is not checked now, if it was ever checked in the past, that will delete events.
To reset iCal's cache and settings in the hope this will bring the events back:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
If the events do not come back then the information you are looking for is truly not in iCal. You will need to restore from a backup (like TimeMachine) from a point in time before the events in question went missing.
If you do not maintain backups of your computer, start now.
Depending on how long ago these events were deleted from iCal you can try using data recovery to bring the files back although as these are past events, you may find that just moving forward from here is simplier than going through the effort but that is of course up to you to decide.
Here are a few examples of data recovery programs:
http://www.prosofteng.com/products/data_rescue.php
http://www.macintosh-data-recovery.com/
http://www.subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products _id=1
You can contact a local Apple Authorized Provider to see if they offer data recovery services: http://www.apple.com/buy/locator/service/
There are many nationwide / worldwide data recovery companies out there. Here are a few examples:
http://www.ontrackdatarecovery.com
http://www.drivesaversdatarecovery.com/
http://www.totalrecall.com/
Best of luck to you.

I cannot add enchange calender events from my iphone

I am trying to send a calender event from my Iphone to my Outlook 2010 calender. we are running Exchange server 2010 at work. The event just never shows up on outlook.

Sounds like a problem with the email account. You can try and turn the account off, don't delete it. Then power the phone off/on and then turn the account back on. See if that helps. If not, then turn the account off and do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, turn the account back on. If that doesn't do it, then delete the account from the phone and then recreate it. That should fix it.

Event monitor cannot find PowerShell generated events

I have a basic event monitor that only looks for an event ID and source. The event I am monitoring is generated via Powershell from a remote system rather than being locally created. I'm not sure if that matters, but it sure seems like it.
If I change the event expression in the monitor to look for other events it will generate alerts, it just cant see my PS events. I've tried changing the ID number, the source, using different params, etc... I'm convinced that this is due to the event creation
process and PS must be creating the event in a different manner than SCOM is looking for. Maybe its a bug where SCOM just ignores events created by proxy.
I found this: http://www.systemcentercentral.com/monitoring-events-written-from-a-remote-server-with-scom/
But that is for Rules. I still tried adding <AllowProxying>false</AllowProxying> to the XML of the MP...SCOM didn't like
it.
Has anyone ran into this before?
We are using SCOM 2012R2 fully updated.
- Slow is smooth and smooth is fast.

I guess I should have been more specific. I am using PowerShell to create an event, it isnt an actual PowerShell event.
write-eventlog -computername Server -logname Application -source Orchestrator -eventID 1 -message "This is an example of the events created with PS that SCOM cannot detect."
Maybe I should explain what I'm doing. I have an Orchestrator runbook that does stuff with things. If one of the runbook activities fails, it will send an event to the machine it was trying to run the activity on. SCOM is monitoring for that PowerShell generated
event stating that the runbook failed.
- Slow is smooth and smooth is fast.
I think you haven't native source "Orchestrator" in PoSh log.
Vladimir Zelenov | http://systemcenter4all.wordpress.com
I run a New-EventLog command first to create the Orchestrator source. Otherwise the Write-EventLog command would fail if the source wasn't there. I can see the event there in the logs.
- Slow is smooth and smooth is fast.

Apps to Go cannot find my iPad

I've downloaded the Apps to Go application for my iPad 2 and now I cannot "sync" using the instructions because the desktop software cannot "find" my iPad - event when connected with a usb cable.

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How do I set repeating workday events in my calender? There is no option for custom.

How do I set repeating workday events in my calender? There is no option for custom.

The built in Calendar app has very limited repeat options. You might want to try an app like Week Cal which has a much more robust repeating event selection. As it pulls from the same calendar database as the built in, there's no reentering of information required.

HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

Renamed Event in FCPX. Now FCPX cannot find it.

I renamed the event "Basic" to "Beginner Basics" and now FCPX gave it a nother name: "Basic (fcp3)".
And FCPX cannot find "Beginner Basics" even though it is located in the folder in finder.
"Beginner Basics" located in the folder in Finder:
What to do?
Can I safely delete these "cloned" (Basic (fcp1 - fc23 - fcp3) events etc?
Do I do this in finder or in FCPX?

I renamed the event in FCPX. But right after the FCPX program froze and had a shutdown I don't know why, but it have had a hard day at work though.. When reopening the program the Beginner Basic event was gone or renamed Basic (fcp3) - what ever that is.. And the event is in its FC folder...

My old calender events - my dairy - is gone! How can I find it somewhere?

I have updated my ipad to os7. Now I lost all my old calender events - my diary! Can I find it somewhere?

Hi,
You can try the latest in the [https://www.mozilla.org/en-US/firefox/all-older.html 3.6 series] which is still supported.

I downloaded 200 photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit. I cannot find the photos anywhere on my computer now. Is there anything to do?

I downloaded 200 photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit. I cannot find the photos anywhere on my computer now. Is there anything to do?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Cannot find default repeat settings for iPod nano 6th generation

Previous individual with problem last year had this problem and was told to go to the setting to set repeat defaults. When I go to settings I cannot find a setting for repeats anywhere. I have a couple of subscribed podcast that seems to always repeat. Can anyone help?

The repeat setting can be found from the Nano's Now Playing screen. While playing a track, swipe to the left to bring up additional controls including the repeat and shuffle settings. See page 21 of your iPod's User Guide for more assistance on the repeat setting.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

I cannot find my Project Library or Event Library

I'm fairly new to FCPX but I've run into a wall. I am working with another editor and I've watched many tutorials that require me simply clicking "COPY EVENT" but I for the life of me cannot find that anywhere. I've watched a couple videos and it seems I'm missing some icons on my work area. For instance, there is a little camera icon at the bottom and a + sign that I don't have on my screen. I feel like I've gone through every command prompt to find where it is but after 2 hours of looking and being frustrated, I've given up.
Could someone point me in the right direction or proper tutorial? My final goal is the abilitiy to share a project with my other editor so he can go through and sift through the dialogue that he want's to keep, and I can add the bells and whistles to it afterwards. This is the tutorial that showed that it was possible.
http://www.fcp.co/final-cut-pro/tutorials/1056-sharing-final-cut-pro-x-projects- between-editors-for-a-collaborative-workflow
Please someone help, I'm pretty savvy when it comes to figuring things out but I'm at a loss here.
Thanks Apple community!!!

Recently FCP X moved to 10.1.1.
This change, changed how FCP X handles media and also adds the Library method.
It puts Projects and Events into these Libraries.
Big changes.
First question to help further is; what is your specific version of FCP X and also the Operating System in use?
Al

Airport utility cannot find my Airport Express, repeated rescans, nothing, even with direct connect via Ethernet. Help!

I use Airport Express to stream iTunes to my home stereo. This is the ONLY thing I use it for. It quit working and now Airport Utility cannot find the Airport Express unit, even after repeated re-boots of all components, resetting the Airport Express, even when connected directly to my router via Ethernet. I use a D-Link wirless router.
I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it. Until Utility can find and recognize the Airport Express hardware, I cannot adjust or reset any settings, etc.
Help!

I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The latest version of AirPort Utility.....5.6.1.....will only run on a Windows 7 machine.
Try AirPort Utility 5.5.3 for Windows (make sure that you have Service Pack 3 installed on your PC, otherwise the application will not run on an XP machine).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it.
After a "hard reset" or "factory default reset", the light will not be green.....it will be slowly flashing amber after it restarts. See this Apple support document for more information on various resets:
Resetting an AirPort Base Station or Time Capsule FAQ

KDC Event ID 29 - The KDC cannot find a suitable certificate to use for smart card logons...

I am getting the event (below) every day on a new 2008 domain controller that I brought up recently. The DC has a domain controller certificate, that was automatically issued by an online enterprise CA. This CA is located in another domain (child domain) within the same forest. The 2008 DC is in the top-lvel domain. None of the other domain controllers , which are 2003, are reporting this message. I ran certutil.exe, and it successfully verifies all domain controller certificates, including the certificate on my new 2008 DC. Any ideas why these messages continue to appear?
The Key Distribution Center (KDC) cannot find a suitable certificate to use for smart card logons, or the KDC certificate could not be verified. Smart card logon may not function correctly if this problem is not resolved. To correct this problem, either verify the existing KDC certificate using certutil.exe or enroll for a new KDC certificate.

Hi,
I have checked the file. Here is my findings:
1.    The computer name of the domain controllers are different in this dcinfo.txt file. There is no Swampoak. I would like to confirm which one is Windows Server 2008 domain controller.
2.    The domain controller Buckeye and Madrone both have 2 KDC certificates, one is expired and the other one is valid:
*** Testing DC[0]: MADRONE
** KDC Certificates for DC MADRONE
Certificate 0: -à Valid
Serial Number: 116bbdd90000000000b6
Issuer: ***
NotBefore: 12/15/2008 2:28 AM
NotAfter: 12/15/2009 2:28 AM
Subject: CN=madrone.****
Certificate Template Name (Certificate Type): DomainController
Non-root Certificate
Template: DomainController, Domain Controller
Certificate 1:   --à Expired
Serial Number: 15c2f00b000000000028
Issuer: ****
NotBefore: 3/9/2007 3:05 PM
NotAfter: 3/8/2008 3:05 PM
Subject: EMPTY (DNS Name=madrone.****)
Non-root Certificate
Template: DomainControllerAuthentication, Domain Controller Authentication
*** Testing DC[1]: BUCKEYE
** KDC Certificates for DC BUCKEYE
Certificate 0: -à Expired
Serial Number: 15c4ddc2000000000029
Issuer: *****
NotBefore: 3/9/2007 3:07 PM
NotAfter: 3/8/2008 3:07 PM
Subject: EMPTY (DNS Name=buckeye.****)
Non-root Certificate
Template: DomainControllerAuthentication, Domain Controller Authentication
Certificate 1: -à Valid
Serial Number: 115f34ec0000000000b4
Issuer: ****
NotBefore: 12/15/2008 2:15 AM
NotAfter: 12/15/2009 2:15 AM
Subject: CN=buckeye.****
Certificate Template Name (Certificate Type): DomainController
Non-root Certificate
Template: DomainController, Domain Controller
Suggestion:
1.    Please delete the expired certificate and then reboot the domain controller and test the issue again.
2.    If the issue persists, please request a new Domain Controller Authentication certificate on the domian controller and check the result.

Cannot find repeating Calender Event

Similar Messages

Maybe you are looking for