Cannot find right display driver after GPU replacement on Satellite P200

I received my Notebook yesterday from the service center, because my graphic card was damaged.
Now I can start the notebook, but in the hardware manager is only an entry for the VGA Card, the new card, which should be in the Notebook, the manager cannot find.
I tried to find it with plug and play but without any results.
The system find only the VGA... After that I tried it with a catalytic driver from ATI 8.9. But after install it also don't work (I restarted the NB)
Maybe I use the wrong driver from ATI, but I cannot find an entry for Mobility Radeon 2600 HD.
Only Radeon 2600 Hd. I am not sure; did this driver work also for mobility?
Can you give me a link for the right driver?

Hi
First of all it would be interesting to know what notebook series you have.
Secondly are you sure that another graphic chip was used?
Are you sure that this is a Mobility Radeon 2600 HD graphic card?
If you are not 100% sure I would recommend contacting the technician who changed the GPU and to ask for some details; what GPU chip was used and where to get the driver.
I would appreciate some feedback from you!

Similar Messages

  • This morning my PB G4 would not get to the password screen after power on.  I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

    this morning my PB G4 would not get to the password screen after power on.  I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
    Did my HD just crash and unrecoverable?  Time to replace my notebook?

    I believe your hard drive has failed. Hope you have a backup.
    Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
    Listed by drive manufacturer.  Click on the > next to the drive & you will hear the typical failure sound.
    How to Tell When Your Hard Drive is Going to Fail
    http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
    Grinding And Clicking – Symptoms Of A Failing Hard Drive
    http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
    Failing Hard Drives
    http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
     Cheers, Tom

  • After installing Lion my printer Epson LBP5050n doesn't work anymore. Cannot find a printer driver

    after installing Lion my printer Epson LBP5050n doesn't work anymore. Cannot find a printer driver.

    Well then you could download the Epson Printer Driver package for Lion. This will add all the Epson printers in that list.

  • HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

    I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

    Hello jlb1977,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Best of luck,
    Mario

  • I cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud

    i cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud, i'm using PC

    Please try clearing cache and cookies. If that doesn't help you can try disabli9ng add-ons and see if it help. [[Safe Mode]] is to disabled add-ons.

  • I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

  • I cannot find my serial number after a disk clean what do I do NOW ?

    I cannot find my serial number after a disk clean what do I do NOW ?

    what do I do NOW ?
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    In the future, you need to get smarter about how you store your serial numbers; they must be backed up onto a different disk, just like your photos; or you may use some other storage method like paper and pencil. Just like photos, you need at least 2 copies in different locations.

  • Cannot find my hard drive connected to my extreme

    Hi - I am using a Windows 7 PC and cannot find the hard drive connected to my airport extreme.  I have gone into manaul set up on the extreme and asked it to share the files which it has confirmed, yet when I go into windows explorer I cannot see the drive at all ...... can I please ask for some assitance?

    Just want to be sure of three things first if you don't mind:
    Does the 802.11n AirPort Extreme Base Station (AEBSn) have a Base Station Name that includes a space? For example: My AirPort Extreme. If it does, rename it so that it does not have any spaces or use the underscore character between words.
    Does the shared HDD have a volume name that includes a space? If it does, again, remove them or add underscore characters.
    Is the HDD formatted in NTFS? If so, the AEBSn does the best job of sharing HDDs formatted in HFS+, then FAT32. It will NOT work properly with HDDs formatted in NTFS. If the HDD is very high capacity, you may want to borrow a friend's Mac to format it in HFS+ or get a utility that lets your PC format/read/write to HFS+ volumes. Regardless of it being formatted in HFS+, the AEBSn will share it out using both the AFP (for Macs) and SMB (for Windows/Linux) file sharing protocols ... so Windows PC should not have any difficulty accessing it.

  • HT4790 I can not find my hard drive after encryption

    I have a macbook pro I upgraded to Mountian lion from 10.6.8.
    Went through the encryption process. Now my user can not find his hard drive after a re boot
    Steve

    Uninstall the program. It should have come with an uninstaller. If not, contact the developer for instructions.

  • Cannot find my wlan driver

    Hi, I have a Toshiba laptop model number: PSM35E-000MN-EN but cannot find the wlan driver, can anyone help please?

    Satellite Pro M30-701 (PSM35E-000MN-EN)
    This site is for US computers. The downloads for your European model are here.
    -Jerry

  • Re: Satellite A660-12P - can't find the right display driver for Win XP

    Hey everyone, i need some help with this one:
    I just made a dual boot Win7 (x64)/XP (x86) on my laptop, but i can't find the right display drivers for the video controller VGA compatible on XP.
    Does someone know where i can find them?
    Many thanks,

    Yes, you get this message because you cannot install the nVidia rivers only executing the exe file.
    If you want to install such drivers then you have to do this in device manager.
    You have to force the notebook to choose the driver
    You can do this choosing the advanced installation procedure which helps you to point to the driver files!
    PS: might be helpful:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • Using Lightroom 5.5:  I can sort images by edit date, but I cannot find a display of the actual time and date of the edit?

    Often when working intensely on a large project which spans over days I forget to mark the start and finish time for each session.  When billing clients for time this can create problems.  I thought the perfect solution to this problem would be to sort catalog by edit time, and then by view the time stamps. I could then find the first and and last edit for a session and quickly translate to session time.  The only problem is I cannot find a place with LT displays this information.

    It seems to be an oversight in LR -- the metadata field "lastEditTime" is available to plugins via the Lightroom SDK, but you can't use that field to define a custom tagset for displaying in the right-hand-side Metadata panel.
    However, here's a workaround that might work for you:  In the right-hand Metadata panel, select the "EXIF and IPTC" preset, and the field Metadata Date will show the date/time of the last time LR wrote metadata back to the file. In Catalog Settings > Metadata, make sure "Automatically write changes into XMP" is checked.  This will cause LR to write develop settings or metadata changes (keywords, captions, ratings, etc.) back to the file soon after you make the changes ("soon after" is typically less than a minute).  

  • Error "The system cannot find the path specified" after upgrading to R2

    Hi guys,
    I upgrade from SP1 CU3 to R2 and since then I can not display images, I get the error: 
    Failed to run the action: Instalar Windows y Configuration Manager. 
    The system cannot find the path specified. (Error: 80070003; Source: Windows)
    just finished restart after applying the operating system. I installed all the updates, I delete and add the pxe point and nothing. The fact is that I have other tasks to capture using the same step and works fine. The hardware is a Virtual Machine
    de vmware.
    If anyone has ever happened or can help would be grateful. Sorry for my English.
    Thxxx!!!!
    Executing command line: OSDSetupWindows.exe TSManager 02/03/2014 19:08:39 932 (0x03A4)
    ==============================[ OSDSetupWindows.exe ]=========================== OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Command line: "OSDSetupWindows.exe" OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Releasing: PS100084 OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Unsuccessful in releasing PS100084. 80070490. OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    !shFile.null(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,823) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Failed to open file: C:\Windows\panther\unattend\unattend.xml (0x80070003) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    this->resolveConfigFileVariables(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,423) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    setup.run(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,1650) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Exiting with code 0x80070003 OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Process completed with exit code 2147942403 TSManager 02/03/2014 19:08:39 932 (0x03A4)
    !--------------------------------------------------------------------------------------------! TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Failed to run the action: Instalar Windows y Configuration Manager.
    The system cannot find the path specified. (Error: 80070003; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
    MP server http://SCCM.domain.com. Ports 80,443. CRL=false. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting authenticator TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set authenticator in transport TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Sending StatusMessage TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting message signatures. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting the authenticator. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    CLibSMSMessageWinHttpTransport::Send: URL: SCCM.domain.com:80 CCM_POST /ccm_system/request TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Request was successful. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set a global environment variable _SMSTSLastActionRetCode=-2147024893 TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Clear local default environment TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Let the parent group (Instalar sistema operativo) decides whether to continue execution TSManager 02/03/2014 19:08:39 932 (0x03A4)
    The execution of the group (Instalar sistema operativo) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Failed to run the last action: Instalar Windows y Configuration Manager. Execution of task sequence failed.
    The system cannot find the path specified. (Error: 80070003; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
    MP server http://SCCM.domain.com. Ports 80,443. CRL=false. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting authenticator TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set authenticator in transport TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Sending StatusMessage TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting message signatures. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting the authenticator. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    CLibSMSMessageWinHttpTransport::Send: URL: SCCM.domain.com:80 CCM_POST /ccm_system/request TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Request was successful. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,923) TSManager 02/03/2014 19:08:56 932 (0x03A4)
    Task Sequence Engine failed! Code: enExecutionFail TSManager 02/03/2014 19:08:56 932 (0x03A4)
    **************************************************************************** TSManager 02/03/2014 19:08:56 932 (0x03A4)
    Task sequence execution failed with error code 80004005 TSManager 02/03/2014 19:08:56 932 (0x03A4)

    Hi,
    There is a workaround:
    Wait until you get to the point where you select the task sequence
    Hit “F8” to open the command prompt
    Type “diskpart” and hit return
    Type “select disk 0” and hit return
    Type “list volume” and see if the CD/DVD drive has a drive letter of C:\ or D:\. If it does move to step 6, otherwise close the command prompt and begin the staging otherwise.
    Type “select volume X” (where X is the volume number of the CD/DVD drive) and hit return
    Type “assign letter=e” and hit return (if the E:\ is already taken up use the next available letter)
    Type “list volume” and hit return to ensure the new drive letter is active
    Close down the command prompt and begin staging
    Reference:
    Failed to open unattend.xml (0×80070003) error
    http://nikifoster.wordpress.com/2012/09/07/failed-to-open-unattend-xml-0x80070003-error/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Re: Satellite P870 - Cannot install Intel display driver

    Hi,
    I have tried from both Intel and from Toshiba and cannot install the Intel driver.
    Without the Intel driver I cannot install the Nvidia driver, I have tried downloading the Intel utility installer from Toshiba as well as the Intel HD 4000 driver.
    I do not want to do a system recovery. Can anyone point me in the right direction?

    Thanks the model number is P 870 02k00s
    It came with Windows home 7 64 bit pre installed. I upgraded to to Pro for work.
    It was working good until last week where someothing made the intel driver start showing it had a fault at this point i uninstalled the driver hoping it would reinstall and i could go on my merry way.
    After this point i tried downloading the driver packs from both toshiba support and intell but both dont work.
    Currently the intell display adapter is listed as video controller (VGA compatible).
    The NIVDIA driver staes i need to install the intel first

  • Satellite Pro 6000: Cannot find correct WLAN driver

    Hi,
    I have re-installed Windows Xp on my notebook Satellite Pro 6000. All is working except for the wireless connectivity.
    When looking in the device manager, I see that the WLAN driver has not (or incorrectly) been installed.
    So looked at the Toshiba site for the corresponding drivers, but I am not able to find the correct one. I did found some drivers, which seems to be the one, but unfortunately after installing the drivers, the wireless connectivity is still not available.
    Any help would be appreciated.
    Thanks in advance.
    Regards, Robert

    Hi
    I dont believe that you cannot install the Wlan driver.
    Go to the device manger and find out which Wlan card was installed. (check properties)
    If the WLan card is placed under network adapters so the driver was installed properly.
    But if you see a unknown device in device manager so you need the WLan driver.
    Then download the WLan driver from the Toshiba site. Be sure that you use the right driver for the right OS!
    You can try firstly to uninstall the old driver and then to install the new one.

Maybe you are looking for