Cannot find Runtime Assitant after complete installations

Hi Gurus,
I have tried deploying OWB 10g along with Oracle 10g (10.2) as well as with Oracle 9i (9.2.0). Both the times the installation was successful but I could't find the Runtime Assitant anywher after complete installations.
I found Repository Assistant with the help of which we created the Design repository but was unable to find the Runtime Assistant in the installed components.
Please help..
Regards,
AB

As detlef pointed out, in the OWB 10gR2 version, there is no more notion of separate repositories. Check out this thread:
Design Repository / Runtime Repository OWB 10gR2
But for every database hosting a target schema you need to install and have running the OWB runtime service. This service is then accessed using the Control Center, previously known as the Runtime Repository Assistant.
Cheers,
Borkur

Similar Messages

How do I resolve the "Mozilla cannot find runtime" error message when I try to start Firefox?

Mozilla Firefox updated to version 36.0. When I click on the Firefox icon to open it I receive the message: "Mozilla cannot find runtime" I receive the same message if I try to open Firefox by selecting "firefox.exe" from within the Program Files. I subsequently uninstall Mozilla Firefox and reinstall it. It will open and run normally right after the re-installation. Then if I close the program and try to re-open it again, I get the same "Mozilla cannot find runtime" error message.
The only way I can get Firefox to open is if I uninstall and re-install it every time I want to open it after the initial re-installation.

''sage68 [[#answer-700841|said]]''
<blockquote>
Hi Adriel,
The "Mozilla cannot find runtime" problem has returned. It occurs in two situations:
1. When Firefox tries to download updates using "updater.exe" (version 36.0.0.5531), which causes my "Norton Internet Security" program to notify me with the message: "Auto-Protect has removed security risk Suspicious.Cloud.9.B" This message is shown every time "updater.exe" activates.
</blockquote>
I also have experienced this during several upgrades, not just the latest. (I am using Windows XP and Norton Security Suite.) Norton identifies c:\program files\mozilla firefox\updated\xul.dll with the Suspicious.Cloud.9.B virus and removes the file. I can set the Norton installation to accept xul.dll but it would make more sense for a Mozilla expert to contact Norton and work out a permanent solution, for all who are facing this problem.

HT1414 Hello, I have had to restore my iphone 4 to its factory setting as I had missed a number of updates and my computer was not recognising the device. I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.

Hello, I have had to restore my iphone 4 to its factory setting as I had missed a number of updates and my computer was not recognising the device. I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.
Would you know how to resolve this issue?
Many thanks.
Nilou

I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.
Would you know how to resolve this issue?
It's a pre-installed app and therefore cannot be deleted so you may have inadvertently moved it onto a screen or into a folder, check the utilities folder as this is a common one for it to disappear into. Check all screens and folders and do a search in Spotlight, it will tell you if the app it still on your iPhone but unfortunately not where it is. If you find it on one or your screens or in a folder, press the icon until it wiggles and then drag it back to where you want it. Alternatively you can reset your home screen in Settings>General>Reset>Reset Home Screen Layout.

ITunes cannot find the folder containing the installation package itunes64.msi.

When I try and update iTunes to the newest version it says that it cannot find the itunes64.msi. How to i fix this? I have a Dell Inspiron if that makes a difference.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

How to solve the Cannot find oraInventory problem in R12 installation.

I search many places to find this so, i decided to shared for hopl anyone else.
The note Rw-10003 During Rapidwiz Upgrade Install [ID 1266385.1] tell how to solved, crating the oraInst.loc file, but it miss something important, where I have to put it in the oraInst.loc file ? Fortunately, i have accses to others DB where look. You have to cretate the file in the /etc directory. Follows this steps.
1.- Go to the main directory where you gonna install the R12 app and create the follow directory
oraInventory
in my case was /u01/hab_r12/oraInventory
2.- Go to /etc and create a text file with the name OraInst.loc and put this lines
inventory_loc=/u01/hab_r12/oraInventory*
inst_group=dba**
*you must put the root directory of the installation
** the group who have the privilege in DB
3.- Re run the rapidinstall.
I hope this can help someone.
Cheers.

Hi;
In addition to Hussein Sawwan great post, Please refer:
R12 Insllation Fails With Error "Cannot Find Orainventory" [ID 1281649.1]
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
How to find the location of GLOBAL Inventory and LOCAL inventory on R12.x ? Why Some Times, There are Issues With The oraInventory Registration During The Post Clone ? [ID 878717.1]
Regard

I cannot find my serial numbers for installation anywhere on my CS5 box set?

I received my CS5 box set about 3 years ago and installed it all fine to my MacBook Pro then. I recently wiped and reformatted my Mac as it was becoming slow. All the software was backed up on my hard drive, however after reading forums it sounds like Adobe aren't all inclusive style apps, so need reinstalling with a disk. I have my full box set but when it came to install I cannot find my serial numbers ANYWHERE. When I went onto customer care it shows that they should be on the back of the DVD sleeves. I really need to install these programs back and I'm getting quite frustrated, help?!

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
You might be able to find your serial number thru your Adobe account online if you registered the products when you originally installed them.
Beyond all that your last hope will be in contacting Adobe support thru chat to see if they can assist:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

[SOLVED] cannot find root device after pacman -Syu

Today I had a problem after pacman -Syu. Of course, my problem stemmed from not paying attention to the following (from https://bbs.archlinux.org/viewtopic.php?id=57205):
<b>Read pacman's output while upgrading.</b>
I could no longer boot. I received a message "cannot find root device" or something similar indicating a device with the appropriate UUID had not been found and I was being dropped into a recovery shell, then, when I typed exit, an emergency shell, followed shortly by a freeze.
After some investigation it appeared my initramfs was broken/non-existent/something after the install. I booted into a live CD and found that updating pacman again, and mkinitcpio -p linux both displayed the following error: "Failed to create temporary working directory in /tmp". Long story short: mktemp was segfaulting. This should be extremely easy to check if you're having a similar problem. I replaced it with the version on the live CD and ran the pacman update again. Success. If you do this, you may need to make sure your live cd architecture and installed kernel architecture are the same.
I'm not sure of the etiquette here, so I'm posting this in case someone else has the same problem I did; and benefits from a similar solution. I have checked the etiquette post and I don't think it's clear whether it's kosher to post things that don't actually require a solution. However, if I have misinterpreted the rules/etiquette and/or this type of post is considered extraneous please remove it.

You have to use lvm first. As all those vg*, lv*, and pv* commands are actually links to the lvm command, you should have to do something like "lvm vgscan" instead of just "vgscan".
Edit: oh and at that point in the boot process, you are actually in the initramfs still (ash to be specific).
Edit2: I was having issues with a USB keyboard and a new machine (actually just a new bios), and found out that because of windows 8's requriement for a fast POST, the default is to turn off the scanning for usb devices. Though this was for UEFI, and I am not sure if the same would apply for a bios booting machine...
Last edited by WonderWoofy (2013-03-26 23:10:40)

Time Machine cannot find Time Capsule after turning auto backups off

2010 macbook 7,1 OSX 10.6.8. Brand new rev.4 Time Capsule 2TB (MD032LL/A) just bought yesterday.
Everything set up just fine and wireless is working. Backups are working.
Issue is that as soon as I turn the Time Machine slider to Off (I can turn it back to On at this point, doesn't matter once it's been in the Off position) in TIme Machine preferences, then try and Enter Time Machine or do a backup, it cannot find the Time Capsule (says cannot find backup volume or such). I have to reselect the drive even though it's icon is showing right on the preferences screen. A reboot will enable it to find the Time Capsule without my input.
If I leave Time Machine turned on, the backups run fine and I can enter the Time Machine. It is turning off Time Machine that triggers the issue.
Tried the following:
-Rebooted Time Capsule
-Made sure Time Capsule name is less than 27 characters (it is 19)
-Firewall is off
-Filevaullt is off
-Booted into Safe Mode
-Repaired permissions
-Trashed TIme Machine plist
-Updated OSX
At this point I called Applecare and they had me send them a capture of my TIme Machine data and will get back to me Monday.
Oddly, my 10.5.8 iMac G5 2ghz is working fine with Time Machine and does not have this issue. I can turn Time Machine off and on all I want and it can find the Time Capsule with no problem.
Thanks for any help.

Apple is still working on the issue but I have now noticed that I cannot VNC into my work PC anymore. I get a "Could not connect to server, connection refused:5900"
I am using Chicken of the VNC and it worked fine until I got the Time Capsule. I know that 5900 is the port used for something and this sounds like it is related to the Time Capsule.
I can't help but think this is also related to the "Cannot find backup disk" message from Time Machine. This all sounds like the Time Capsule goofed up the works here.
Also, I now have tons of reports in the console of it not being able to count items in a file at system/library/StartupItems. That folder is NOT there. Which is why I assume the errors. I have seen a few other reports and people are just restoring the file from Time Machine or making it via command line with admin. When I go back far enough in Time Machine, the file IS there but has nothing in it.
I asked Apple about that too and they checked a 10.6.8 computer and it had the file so not sure what is up there. Not sure if it was 10.6.8 update or the bunch of iTunes, etc that I did after that.
Have not restored that file yet, will wait to see what they say about the Time Capsule mess.
Any ideas on restoring my VNC connection?

HT1766 my 3g cannot find my SIM after updating

After updating my iphone 3G to iOS 5, it cannot says there is no SIM casrd installed on the phone.
What should I do?

I have the same issue on all of my iOS devices since updating to iOS 8 and the latest Airport Utility. My Mac can still see all of the devices on my network and my iOS devices will connect to and use my WiFi network, but the Airport Utility cannot find any of the devices to manage them. I see this as a common message on the iTunes reviews for the app, so it is not an isolated issue.

Nightmare Customer Service Verizon - DAD cannot connect phone line after fiber installation

Similar to other complaints I have seen online yet Verizon customer service reps deny they have ever heard of the problem. After FIOS installation my ADT system stopped communicating.
We had Verizon FIOS triple play installed last August (2012) after a summer long marketing campaign by Verizon. Several trips to get it. A dropped phone number transfer order and Verizon tried to issue me a new phone number ... that took several attempts to fix.
Sept 2012 Our ADT service calls us to inform us our monitored alarm system stopped communicating since Aug ... I call ADT -they say it was Verizons fault, but could come out and fix it for a fee. It took months to getr back to Verizon
I first spent almost an hour online last night with a Verizon rep who claimed it was not Verizon's fault - Claiming that all the tech had to do was deliver a phone signal to one jack. I called Verizon customer service and wasted time with that rep also. I asked hat a supervisor call and the rep could not confirm that a supervisor would even get back to me.
TERRIBLE CUSTOMER SERVICE - Time to cancel Verizon

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".
There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.

'Cannot find symbol' error after putting class into package

I'm sure this is probably just a stupid mistake that I am making somewhere, but I can't figure it out.
I have written a Java program, "LineConsole.java" and an interface, "LineConsoleKeyListener.java". LineConsole.java uses the interface (it does not implement it... it uses LineConsoleKeyListener objects in the program). If I put the two .java files into the same directory and compile them, everything works.
So now I want to put them in a package called "LineConsole". I thought all I had to do was move the two files into a folder called "LineConsole" and add "package LineConsole;" to the top of each file. I did that, but now LineConsole.java does not compile. It complains that it cannot find the LineConsoleKeyListener interface, even though it's right there in the same directory.
What am I doing wrong? Do members of a package have to import themselves or something?
Thanks!
Message was edited by:
L4E_WakaMol-King

Thanks guys :)
It's working now.
One more question...
Right now I have 3 files in a folder names "LineCon":
- LineConsole.class
- LineConsoleKeyListener.class
- wincbreak.dll
If I copy that directory into the same directory as some other program I am writing, I can use those classes just like they are in a package. But is there any way to zip that package into a jar file? I know how to create jar files, but is there a way to make them behave like packages?
I have tried creating a jar file with the individual files and also with all three files in a directory. The jar file is created successfully, but I cannot copy that jar file into the directory of a program and use the classes within it as if they were a package.
I guess my ultimate question here is... how do I import a .class file that is in a jar file?

Firefox cannot find profile, even after deleting and re-installing.

I un-installed firefox when the problem first started, then re-installed it. Still cannot find profile. I went through the Profile Manager Wizard, but that didn't work. It couldn't find the program. I'm not on firefox now since it won't load.

See:
*https://support.mozilla.org/kb/how-run-firefox-when-your-profile-missing-or-inacc
This is usually caused by a problem with the profiles.ini file and the profile marked as Default=1 in this file is no longer present on the hard drive.
*Windows: %AppData%\Mozilla\Firefox\<br>C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*Linux: ~/.mozilla/firefox/
*Mac: ~/Library/Application Support/Firefox/
You can use one of these to make Firefox create/use a new default profile:
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Cannot find Photoshop CC after download

Have used Adobe Application Manager to download Photoshop CC. It now says it is up to date but I cannot find it on my Mac. Where is it? Can I start all over again?
Double clicking on the icon within Adobe Application Manager does nothing.
I am running an older 2.66 Ghz Intel Core 2 DUo with 8Gb memory.
Also Lightroom 5 not instal!
Many thanks in anticipation for any help.

check it on application folder

Cannot find HP printer after upgrade to Home Hub 3...

Hello
an engineer installed a home hub 3/infinity this morning and left after about 10mins giving me a tiny getting-started booklet, a CD, and a couple of stickers to show my network keys etc. Whilst I can access the internet with my laptop, and iphone, I am tearing my hair out now (8hours later) in trying to print anything!
I am running on Macbook Air MacOS 10.7. My printer is HP deskjet F4580.
My mac cannot see the printer, in System Preferences.
The blue wireless light flashes continuously on the printer.
I have been all over various forums and I just don't have a clue what most of them are talking about.
I have printed out a wireless network test report from the printer and it seems to show the old network name (for my old home hub 2) but if this is the problem I have no idea how to change it. I can't even find the driver menu's any more. And, now i just discovered on an HP thread that there might be an inherent "firmware"(?) issue regarding BT Home Hub 3 and HP printers.
I would appreciate any insights and would be grateful for any step-by-step help, thank you. (so wanting my old home hub 2 back!)

Have a look at this link. It takes you through the set up
http://www.hp.com/global/us/en/wireless/reconfiguring-system-help3.html
Another option would be to change the new Homehub to have the same name and passkey as your old HH2 then the printer should find it. It would mean logging all your other devices back on once you had done this. See this link how to do that.
http://www.youtube.com/watch?v=egCh2dPp1zw

Cannot find "ant" in the oracle10g installation

I have installed oracle10g application server. i was asked to
please make sure that the ant command associated with the OC4J ant distribution is in your execution path (%OC4J_HOME%/ant/bin).
the problem is
1. which directory in oracle10g does the oc4j_home point to
2. i searched for 'ant' in the entire oracle10g directory and could not find it at all. Is my installation incorrect?
please tell me where i can find the ant in the oracle10g dorectory
Thanks,
Sharath

Hello
As far as I know, ANT is not a component of OAS. So you never will be able to find it in a fresh oracle install.
What you can do is go to Ant/Jakarta home page [1], download the software and install it in the OH
[1] - http://ant.apache.org/

Cannot find Runtime Assitant after complete installations

Similar Messages

Maybe you are looking for