Cannot find setup cd

Can you tell me where I can download the setup for a wireless-B router. I recently moved and cannot locate my setup cd.

You do not need one. The router can be configured manually by opening your browser and typing http://192.168.1.1 into the address field. That will open your router user interface log in window and be default the user is left blank and the password is admin (unless you changed it). That will get you into the router so you can configure it to your needs.
Richard Aichner (Ikester)

Similar Messages

I cannot find imported mail boxes. if i try to setup a new mailbox, it shows the existence of the mailboxes that i am looking for in the location drop down menu. where would they be located?

i cannot find imported mailboxes. if i try to setup a new mailbox, it shows the existence of the mailboxes under location/on my mac. they do not show up in the mailbox list. where would they be located so that i can retrieve them?

Did you quite Mail and relaunch?
Your imported mail is stored in a new mailbox called “Import.” To reorganize imported messages, create new mailboxes and drag folders and messages from the Import mailbox to other mailboxes. When you’re done, you can delete the Import mailbox.
If you don’t see your mailboxes in Mail, choose View > Show Mailbox List; empty mailboxes aren’t imported.

Re-installing the app for a CQ521B gives a "cannot find E:setup\..\setup\hpzpnp01.exe" error.

Hi,
It takes a matter of seconds before getting a pop up window saying "The system cannot find the path specified" . At the top of the Piop-Up the full error is
"E:\Setup\..\Setup\hpzpnp01.exe" "-wStub" "1837708" -l ENU -f "C:\Windows\hp...
After pressing the various continue buttons, the tidyup crashes, with the details
Problem signature:
Problem Event Name: BEX
Application Name: hpzscr01.EXE
Application Version: 14.0.301.0
Application Timestamp: 4b6150fc
Fault Module Name: hpzscr01.EXE
Fault Module Version: 14.0.301.0
Fault Module Timestamp: 4b6150fc
Exception Offset: 000a61d9
Exception Code: c0000417
Exception Data: 00000000
OS Version: 6.0.6002.2.2.0.256.4
Locale ID: 2057
Additional Information 1: 18eb
Additional Information 2: 701adf65b2f7b5913002bd88930dae75
Additional Information 3: f7dd
Additional Information 4: 26825aa856c9de7a6004ef5bd510590b
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Any ideas?
Steve.
This question was solved.
View Solution.

I had the same issue and researched for some time will little result. I finally was able to reinstall by doing the folllowing:
(note try to install and when you have your error copy it down noting the subdirectory or other location.)
1) Load the software (full feature in my case) but do not start the install. This process copies data onto your hard drive prior to installation.
2) Search for "hpzpnp01.exe" and then go to the file location. Note where it is found (subdirectory).
3) In your system search area enter %temp% and return. This will take you to the area on your system where the data was copied.
4) Look for the subdirectory where the hpzpnp01.exe was found (may be in several subdirectories). Choose a subdirectory containing the hpzpnp01.exe and rename that subdirectory to the one called for in the error statement.
5) Now erun the install. It worked for me, so this or a variation of this method should work for most people.

Windows cannot find C:/users/****/appdata/local/adobe/oobe/pdapp/dwa/setup.exe

I am trying to load Adobe Photoshop CS5 and get the message:
Windows cannot find C:/users/****/appdata/local/adobe/oobe/pdapp/dwa/setup.exe
Can someone please help. I am a novice so please give step by step instructions.

how are you trying to install?
downloaded files? files on an installation disk?
are you changing any default installation settings?
when do you see that message?

Problem extracting Acrobat XI setup.exe file - using WinRAR extractor - "Windows cannot find file...

I have downloaded Adobe Acrobat XI from my university download site (so I know it's a legit, safe copy). When I run the .exe file, even as an administrator, it begins to extract using WinRAR self-extracting archive and stops with a pop-up error:
"Windows cannot find "C:\Users\UserName\AppData\Local\Temp\RarSFX0\Adobe Acrobat XI\setup.exe"
I scanned using Malwarebytes, AVG, Spybot, and ran a \scannow command. Nothing finds a corrupt file. Any ideas what could be causing the extractor to not work?
I am running Windows 7 on a 64-bit Dell laptop.

SOLUITION - I had to actually download a version of WinRAR extractor. Right click the downloaded AcrobatXI-Windows.exe file and choose "Open with WinRAR" (this option was not available until I downloaded the WinRAR application - apparently the extractor runs automatically but doesn't have full funtionality). Then I nagivated to the Adobe Acrobat folder in the WinRAR window and selected the setup.exe file to run. It opened and installed beautifully.

During iCloud setup, I was notified that an email was sent to my mail account for activation. I cannot find the e-mail.

During iCloud setup, I was notified that an email was sent to my mail account for activation. I cannot find the e-mail.

Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.

Visio setup cannot find Visio.en-us\VisioLR.cab

When I attempt to install Visio 32bit on a laptop running 32bit Windows 7 I get the following error message when installation begins copying files.
"Setup cannot find Visio.en-us\VisioLR.cab. Browse to a valid installation source, and then click ok."
I am attempting to install from the CD. When I try to browse to the VisioLR.cab file on the CD, during the installation the file does not show up.
Any help I can get is appreciated.

It's on both of my images (x86 and x64). Since that directory is for the US english version, what language is the disk for and where did you get it? The download version from MS is an EXE and not a disk image.
al
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Al Edlund Visio MVP

Setup cannot find the Geforce4 4200 device

Hello,
I've just bought a Geforce4 4200 128MB MSI card which replaced my old voodoo3 3000 card.
The BIOS seem to be able to communicate with the card as the card name shows when I turn on the computer.
The problem is when I try to run the CD's setup program , it says "cannot find the device in your system".
When I tried to view PCI information in linux , it printed out the following:
"bus 1 , device 0 , function 0
VGA compatible controller: PCI device 10de:0254 (nVidia corporation) (rev 163)
IRQ 11." , and some more infromation regarding memory addresses.
I'm running win95 on Celeron III 600MHz.
Is the above PCI information makes sense? Why cant the windows installation find my device?
Thank you for your responses,
Ishai

remove any device from system that has something to do with v. card...and all "unknown devices", reboot and try again. if not install drivers manualy...may be will work

Where is firefox setup 7.0.1.exe saved. Cannot find it after downloading it.

Trying to download Firefox 7.0.1.exe for my IronKey. I click save but it does not allow me to type where to save it and I cannot find it once it is saved.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

ICloud setup - how? Cannot find it

I have, after an automatic sogtware update, agreed to use icloud.
cannot find it now in my mac to set things up though - when i search fot icloud in my applications/all files, nothing appears.

you have 10.7.2 correct?

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Xorg cannot find screens with nvidia module

I know that this question is very common, but I cannot find solution,
I should use "nvidia" drivers on Lenovo notebook with two videocards (work with Cuda technology).
Xorg cannot load nvidia module with this xorg.conf. Can anybody help?
Thanks.
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 0 "Screen1" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # 
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # 
#Option "FPScale" # [<bool>]
#Option "FPTweak" # 
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # [<bool>]
#Option "ColorKey" # 
#Option "VideoKey" # 
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "Throttle" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "DelayedFlush" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
#Option "TripleBuffer" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Xorg.0.log:
[ 27.732]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 27.732] X Protocol Version 11, Revision 0
[ 27.732] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 27.732] Current Operating System: Linux kot_dymok 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[ 27.732] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 27.732] Build Date: 19 October 2012 03:54:56PM
[ 27.732]
[ 27.732] Current version of pixman: 0.26.2
[ 27.732] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.732] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.732] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 26 01:54:00 2012
[ 27.732] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.732] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.732] (==) ServerLayout "X.org Configured"
[ 27.732] (**) |-->Screen "Screen0" (0)
[ 27.732] (**) | |-->Monitor "Monitor0"
[ 27.732] (**) | |-->Device "Card0"
[ 27.732] (**) |-->Input Device "Mouse0"
[ 27.733] (**) |-->Input Device "Keyboard0"
[ 27.733] (==) Automatically adding devices
[ 27.733] (==) Automatically enabling devices
[ 27.733] (==) Automatically adding GPU devices
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.733] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 27.733] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 27.733] (WW) Disabling Mouse0
[ 27.733] (WW) Disabling Keyboard0
[ 27.733] (II) Loader magic: 0x7fcc20
[ 27.733] (II) Module ABI versions:
[ 27.733] X.Org ANSI C Emulation: 0.4
[ 27.733] X.Org Video Driver: 13.0
[ 27.733] X.Org XInput driver : 18.0
[ 27.733] X.Org Server Extension : 7.0
[ 27.733] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 27.734] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 27.734] (--) PCI: (0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 27.734] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.734] Initializing built-in extension Generic Event Extension
[ 27.734] Initializing built-in extension SHAPE
[ 27.734] Initializing built-in extension MIT-SHM
[ 27.734] Initializing built-in extension XInputExtension
[ 27.734] Initializing built-in extension XTEST
[ 27.734] Initializing built-in extension BIG-REQUESTS
[ 27.734] Initializing built-in extension SYNC
[ 27.734] Initializing built-in extension XKEYBOARD
[ 27.734] Initializing built-in extension XC-MISC
[ 27.734] Initializing built-in extension SECURITY
[ 27.734] Initializing built-in extension XINERAMA
[ 27.734] Initializing built-in extension XFIXES
[ 27.734] Initializing built-in extension RENDER
[ 27.734] Initializing built-in extension RANDR
[ 27.734] Initializing built-in extension COMPOSITE
[ 27.734] Initializing built-in extension DAMAGE
[ 27.734] Initializing built-in extension MIT-SCREEN-SAVER
[ 27.734] Initializing built-in extension DOUBLE-BUFFER
[ 27.734] Initializing built-in extension RECORD
[ 27.734] Initializing built-in extension DPMS
[ 27.735] Initializing built-in extension X-Resource
[ 27.735] Initializing built-in extension XVideo
[ 27.735] Initializing built-in extension XVideo-MotionCompensation
[ 27.735] Initializing built-in extension XFree86-VidModeExtension
[ 27.735] Initializing built-in extension XFree86-DGA
[ 27.735] Initializing built-in extension XFree86-DRI
[ 27.735] Initializing built-in extension DRI2
[ 27.735] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 27.735] (II) LoadModule: "glx"
[ 27.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.741] (II) Module glx: vendor="NVIDIA Corporation"
[ 27.741] compiled for 4.0.2, module version = 1.0.0
[ 27.741] Module class: X.Org Server Extension
[ 27.741] (II) NVIDIA GLX Module 304.43 Sun Aug 19 20:34:01 PDT 2012
[ 27.741] Loading extension GLX
[ 27.741] (II) LoadModule: "nvidia"
[ 27.741] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.742] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.742] compiled for 4.0.2, module version = 1.0.0
[ 27.742] Module class: X.Org Video Driver
[ 27.815] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 27.815] (EE) NVIDIA: system's kernel log for additional error messages.
[ 27.815] (II) UnloadModule: "nvidia"
[ 27.815] (II) Unloading nvidia
[ 27.815] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 27.815] (EE) No drivers available.
[ 27.815]
Fatal server error:
[ 27.815] no screens found
[ 27.815] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 27.815] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 27.815] (EE)
dmesg.log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN33WW(V2.03) 06/06/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
[ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13f5fffff]
[ 0.000000] [mem 0x100000000-0x13f5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13f5fffff @ [mem 0xbaab9000-0xbaabefff]
[ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bafbb000 00040
[ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
[ 0.000000] NODE_DATA [mem 0x13f5fc000-0x13f5fffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xbaabefff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13f5fffff]
[ 0.000000] On node 0 totalpages: 1023564
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 743679 pages, LIFO batch:31
[ 0.000000] Normal zone: 4056 pages used for memmap
[ 0.000000] Normal zone: 255528 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
[ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
[ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003118
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3947540k/5232640k available (4661k kernel code, 1138384k absent, 146716k reserved, 4191k data, 760k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2494.278 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.41 BogoMIPS (lpj=8314260)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000025] Security Framework initialized
[ 0.000028] AppArmor: AppArmor disabled by boot time parameter
[ 0.000250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001230] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001662] Mount-cache hash table entries: 256
[ 0.001817] Initializing cgroup subsys cpuacct
[ 0.001818] Initializing cgroup subsys memory
[ 0.001825] Initializing cgroup subsys devices
[ 0.001826] Initializing cgroup subsys freezer
[ 0.001827] Initializing cgroup subsys net_cls
[ 0.001828] Initializing cgroup subsys blkio
[ 0.001850] CPU: Physical Processor ID: 0
[ 0.001850] CPU: Processor Core ID: 0
[ 0.001854] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002211] mce: CPU supports 7 MCE banks
[ 0.002221] CPU0: Thermal monitoring enabled (TM1)
[ 0.002227] using mwait in idle threads.
[ 0.003141] ACPI: Core revision 20120320
[ 0.021624] ftrace: allocating 18032 entries in 71 pages
[ 0.029975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062936] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.166795] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.166800] ... version: 3
[ 0.166801] ... bit width: 48
[ 0.166802] ... generic registers: 4
[ 0.166803] ... value mask: 0000ffffffffffff
[ 0.166804] ... max period: 000000007fffffff
[ 0.166804] ... fixed-purpose events: 3
[ 0.166805] ... event mask: 000000070000000f
[ 0.186863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.200098] Booting Node 0, Processors #1 #2 #3
[ 0.266902] Brought up 4 CPUs
[ 0.266905] Total of 4 processors activated (19962.65 BogoMIPS).
[ 0.269981] devtmpfs: initialized
[ 0.270796] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.271536] NET: Registered protocol family 16
[ 0.271635] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.271637] ACPI: bus type pci registered
[ 0.271695] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.271697] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.277539] PCI: Using configuration type 1 for base access
[ 0.277665] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.277666] mtrr: probably your BIOS does not setup all CPUs.
[ 0.277666] mtrr: corrected configuration.
[ 0.277952] bio: create slab <bio-0> at 0
[ 0.277994] ACPI: Added _OSI(Module Device)
[ 0.277995] ACPI: Added _OSI(Processor Device)
[ 0.277996] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.277997] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.279372] ACPI: EC: Look up EC in DSDT
[ 0.280773] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.283353] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.284330] ACPI: SSDT 00000000bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284681] ACPI: Dynamic OEM Table Load:
[ 0.284683] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284902] ACPI: SSDT 00000000bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285275] ACPI: Dynamic OEM Table Load:
[ 0.285277] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285380] ACPI: SSDT 00000000bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.285725] ACPI: Dynamic OEM Table Load:
[ 0.285726] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.286579] ACPI: Interpreter enabled
[ 0.286581] ACPI: (supports S0 S3 S4 S5)
[ 0.286600] ACPI: Using IOAPIC for interrupt routing
[ 0.409275] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.409424] ACPI: No dock devices found.
[ 0.409427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.409682] \_SB_.PCI0:_OSC invalid UUID
[ 0.409683] _OSC request data:1 8 1f
[ 0.409687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.410085] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
[ 0.410087] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
[ 0.410089] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[ 0.410091] pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.410117] PCI host bridge to bus 0000:00
[ 0.410119] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
[ 0.410121] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
[ 0.410122] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.410123] pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.410131] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
[ 0.410164] pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
[ 0.410192] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[ 0.410210] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
[ 0.410220] pci 0000:00:02.0: >reg 10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.410226] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.410231] pci 0000:00:02.0: >reg 20: [io 0x4000-0x403f]
[ 0.410281] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
[ 0.410303] pci 0000:00:14.0: >reg 10: [mem 0xd3a00000-0xd3a0ffff 64bit]
[ 0.410373] pci 0000:00:14.0: >PME# supported from D3hot D3cold
[ 0.410396] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
[ 0.410419] pci 0000:00:16.0: >reg 10: [mem 0xd3a14000-0xd3a1400f 64bit]
[ 0.410494] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
[ 0.410528] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
[ 0.410779] pci 0000:00:1a.0: >reg 10: [mem 0xd3a19000-0xd3a193ff]
[ 0.412197] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
[ 0.412223] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
[ 0.412237] pci 0000:00:1b.0: >reg 10: [mem 0xd3a10000-0xd3a13fff 64bit]
[ 0.412305] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[ 0.412329] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
[ 0.412408] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[ 0.412433] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
[ 0.412512] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
[ 0.412546] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
[ 0.412788] pci 0000:00:1d.0: >reg 10: [mem 0xd3a18000-0xd3a183ff]
[ 0.414203] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
[ 0.414230] pci 0000:00:1f.0: >[8086:1e59] type 00 class 0x060100
[ 0.414353] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
[ 0.414371] pci 0000:00:1f.2: >reg 10: [io 0x4088-0x408f]
[ 0.414379] pci 0000:00:1f.2: >reg 14: [io 0x4094-0x4097]
[ 0.414387] pci 0000:00:1f.2: >reg 18: [io 0x4080-0x4087]
[ 0.414396] pci 0000:00:1f.2: >reg 1c: [io 0x4090-0x4093]
[ 0.414404] pci 0000:00:1f.2: >reg 20: [io 0x4060-0x407f]
[ 0.414412] pci 0000:00:1f.2: >reg 24: [mem 0xd3a17000-0xd3a177ff]
[ 0.414457] pci 0000:00:1f.2: >PME# supported from D3hot
[ 0.414475] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
[ 0.414491] pci 0000:00:1f.3: >reg 10: [mem 0xd3a15000-0xd3a150ff 64bit]
[ 0.414512] pci 0000:00:1f.3: >reg 20: [io 0x4040-0x405f]
[ 0.414568] pci 0000:01:00.0: >[10de:0de9] type 00 class 0x030000
[ 0.414578] pci 0000:01:00.0: >reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.414589] pci 0000:01:00.0: >reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.414600] pci 0000:01:00.0: >reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.414607] pci 0000:01:00.0: >reg 24: [io 0x3000-0x307f]
[ 0.414615] pci 0000:01:00.0: >reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.419807] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.419812] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.419816] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.419834] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.419945] pci 0000:02:00.0: >[1969:1090] type 00 class 0x020000
[ 0.420065] pci 0000:02:00.0: >reg 10: [mem 0xd3900000-0xd393ffff 64bit]
[ 0.420115] pci 0000:02:00.0: >reg 18: [io 0x2000-0x207f]
[ 0.420574] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426507] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.426512] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.426516] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.426588] pci 0000:03:00.0: >[168c:002b] type 00 class 0x028000
[ 0.426615] pci 0000:03:00.0: >reg 10: [mem 0xd3800000-0xd380ffff 64bit]
[ 0.426744] pci 0000:03:00.0: >supports D1
[ 0.426746] pci 0000:03:00.0: >PME# supported from D0 D1 D3hot
[ 0.433127] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.433150] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.433170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.433258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.433280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.433313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.433378] \_SB_.PCI0:_OSC invalid UUID
[ 0.433379] _OSC request data:1 1f 1f
[ 0.433382] pci0000:00: >Requesting ACPI _OSC control (0x1d)
[ 0.433416] \_SB_.PCI0:_OSC invalid UUID
[ 0.433417] _OSC request data:1 0 1d
[ 0.433420] pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.433421] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.435631] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435669] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435705] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435740] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435809] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435879] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435945] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.435951] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.435952] vgaarb: loaded
[ 0.435953] vgaarb: bridge control possible 0000:01:00.0
[ 0.435954] vgaarb: no bridge control possible 0000:00:02.0
[ 0.435977] PCI: Using ACPI for IRQ routing
[ 0.437526] PCI: pci_cache_line_size set to 64 bytes
[ 0.437598] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.437599] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.437600] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 0.437602] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.437603] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[ 0.437671] NetLabel: Initializing
[ 0.437672] NetLabel: domain hash size = 128
[ 0.437673] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.437681] NetLabel: unlabeled traffic allowed by default
[ 0.437696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.437700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.439709] Switching to clocksource hpet
[ 0.443743] pnp: PnP ACPI init
[ 0.443758] ACPI: bus type pnp registered
[ 0.444001] pnp 00:00: >[bus 00-3e]
[ 0.444004] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.444005] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.444007] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.444008] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.444010] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
[ 0.444011] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
[ 0.444012] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
[ 0.444013] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
[ 0.444015] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
[ 0.444016] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
[ 0.444017] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
[ 0.444019] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
[ 0.444021] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
[ 0.444023] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
[ 0.444024] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
[ 0.444025] pnp 00:00: >[mem 0x000ec000-0x000effff window]
[ 0.444027] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
[ 0.444028] pnp 00:00: >[mem 0xbfa00000-0xfeafffff window]
[ 0.444029] pnp 00:00: >[mem 0x00010000-0x0001ffff window]
[ 0.444084] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.444094] pnp 00:01: >[io 0x0000-0x001f]
[ 0.444095] pnp 00:01: >[io 0x0081-0x0091]
[ 0.444096] pnp 00:01: >[io 0x0093-0x009f]
[ 0.444097] pnp 00:01: >[io 0x00c0-0x00df]
[ 0.444099] pnp 00:01: >[dma 4]
[ 0.444115] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.444121] pnp 00:02: >[mem 0xff010000-0xffffffff]
[ 0.444135] pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
[ 0.444191] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
[ 0.444207] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.444214] pnp 00:04: >[io 0x00f0]
[ 0.444222] pnp 00:04: >[irq 13]
[ 0.444238] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.444246] pnp 00:05: >[io 0x002e-0x002f]
[ 0.444247] pnp 00:05: >[io 0x004e-0x004f]
[ 0.444248] pnp 00:05: >[io 0x0061]
[ 0.444249] pnp 00:05: >[io 0x0063]
[ 0.444251] pnp 00:05: >[io 0x0065]
[ 0.444252] pnp 00:05: >[io 0x0067]
[ 0.444253] pnp 00:05: >[io 0x0070]
[ 0.444254] pnp 00:05: >[io 0x0080]
[ 0.444255] pnp 00:05: >[io 0x0092]
[ 0.444256] pnp 00:05: >[io 0x00b2-0x00b3]
[ 0.444257] pnp 00:05: >[io 0x0680-0x069f]
[ 0.444259] pnp 00:05: >[io 0x1000-0x100f]
[ 0.444260] pnp 00:05: >[io 0xffff]
[ 0.444261] pnp 00:05: >[io 0xffff]
[ 0.444262] pnp 00:05: >[io 0x0400-0x0453]
[ 0.444263] pnp 00:05: >[io 0x0458-0x047f]
[ 0.444264] pnp 00:05: >[io 0x0500-0x057f]
[ 0.444266] pnp 00:05: >[io 0x164e-0x164f]
[ 0.444267] pnp 00:05: >[io 0xfd60-0xfd63]
[ 0.444300] system 00:05: >[io 0x0680-0x069f] has been reserved
[ 0.444302] system 00:05: >[io 0x1000-0x100f] has been reserved
[ 0.444303] system 00:05: >[io 0xffff] has been reserved
[ 0.444305] system 00:05: >[io 0xffff] has been reserved
[ 0.444306] system 00:05: >[io 0x0400-0x0453] has been reserved
[ 0.444308] system 00:05: >[io 0x0458-0x047f] has been reserved
[ 0.444309] system 00:05: >[io 0x0500-0x057f] has been reserved
[ 0.444311] system 00:05: >[io 0x164e-0x164f] has been reserved
[ 0.444312] system 00:05: >[io 0xfd60-0xfd63] has been reserved
[ 0.444315] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444322] pnp 00:06: >[io 0x0070-0x0077]
[ 0.444327] pnp 00:06: >[irq 8]
[ 0.444341] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.444360] pnp 00:07: >[io 0x0454-0x0457]
[ 0.444385] system 00:07: >[io 0x0454-0x0457] has been reserved
[ 0.444387] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.444394] pnp 00:08: >[io 0x0060]
[ 0.444396] pnp 00:08: >[io 0x0064]
[ 0.444400] pnp 00:08: >[irq 1]
[ 0.444416] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.444460] pnp 00:09: >[irq 12]
[ 0.444479] pnp 00:09: >Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.503108] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
[ 0.503110] pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
[ 0.503111] pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
[ 0.503113] pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
[ 0.503114] pnp 00:0a: >[mem 0xf0000000-0xf3ffffff]
[ 0.503115] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
[ 0.503116] pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
[ 0.503117] pnp 00:0a: >[mem 0xff000000-0xff000fff]
[ 0.503119] pnp 00:0a: >[mem 0xff010000-0xffffffff]
[ 0.503120] pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
[ 0.503121] pnp 00:0a: >[mem 0xbfa00000-0xbfa00fff]
[ 0.503153] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.503154] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
[ 0.503156] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
[ 0.503159] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
[ 0.503161] system 00:0a: >[mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.503162] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.503164] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
[ 0.503165] system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
[ 0.503167] system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
[ 0.503169] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.503170] system 00:0a: >[mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.503173] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.503426] pnp 00:0b: >[mem 0x20000000-0x201fffff]
[ 0.503428] pnp 00:0b: >[mem 0x40004000-0x40004fff]
[ 0.503467] system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
[ 0.503469] system 00:0b: >[mem 0x40004000-0x40004fff] has been reserved
[ 0.503471] system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.503484] pnp: PnP ACPI: found 12 devices
[ 0.503485] ACPI: ACPI bus type pnp unregistered
[ 0.509719] pci 0000:01:00.0: >no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.509749] pci 0000:01:00.0: >BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
[ 0.509751] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.509753] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.509756] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.509758] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509761] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.509764] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.509769] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.509778] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.509783] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.509815] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.509816] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
[ 0.509818] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.509819] pci_bus 0000:00: >resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.509821] pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff]
[ 0.509822] pci_bus 0000:01: >resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.509824] pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509825] pci_bus 0000:02: >resource 0 [io 0x2000-0x2fff]
[ 0.509827] pci_bus 0000:02: >resource 1 [mem 0xd3900000-0xd39fffff]
[ 0.509828] pci_bus 0000:03: >resource 1 [mem 0xd3800000-0xd38fffff]
[ 0.509849] NET: Registered protocol family 2
[ 0.509940] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.510462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.511934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.512121] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.512123] TCP: reno registered
[ 0.512131] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512148] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512215] NET: Registered protocol family 1
[ 0.512227] pci 0000:00:02.0: >Boot video device
[ 0.539686] PCI: CLS 64 bytes, default 64
[ 0.539720] Unpacking initramfs...
[ 0.587463] Freeing initrd memory: 3004k freed
[ 0.587782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.587786] software IO TLB [mem 0xb6ab9000-0xbaab8fff] (64MB) mapped at [ffff8800b6ab9000-ffff8800baab8fff]
[ 0.587808] Simple Boot Flag at 0x44 set to 0x1
[ 0.588188] audit: initializing netlink socket (disabled)
[ 0.588201] type=2000 audit(1351239412.473:1): initialized
[ 0.598216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.599469] VFS: Disk quotas dquot_6.5.2
[ 0.599501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.599601] msgmni has been set to 7715
[ 0.599760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.599785] io scheduler noop registered
[ 0.599786] io scheduler deadline registered
[ 0.599824] io scheduler cfq registered (default)
[ 0.599901] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.600058] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.600059] vesafb: scrolling: redraw
[ 0.600061] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.600464] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k
[ 0.667429] Console: switching to colour frame buffer device 170x48
[ 0.734140] fb0: VESA VGA frame buffer device
[ 0.734147] intel_idle: does not run on family 6 model 58
[ 0.734170] GHES: HEST is not enabled!
[ 0.734209] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.734579] Linux agpgart interface v0.103
[ 0.734634] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 0.748568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.748578] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.748663] mousedev: PS/2 mouse device common for all mice
[ 0.748692] rtc_cmos 00:06: >RTC can wake from S4
[ 0.748829] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[ 0.748861] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.748868] cpuidle: using governor ladder
[ 0.748870] cpuidle: using governor menu
[ 0.748966] drop_monitor: Initializing network drop monitor service
[ 0.749023] TCP: cubic registered
[ 0.749094] NET: Registered protocol family 10
[ 0.749220] NET: Registered protocol family 17
[ 0.749227] Key type dns_resolver registered
[ 0.749314] PM: Checking hibernation image partition /dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff
[ 0.762323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.775385] PM: Hibernation image not present or could not be loaded.
[ 0.775393] registered taskstats version 1
[ 0.775839] rtc_cmos 00:06: >setting system clock to 2012-10-26 08:16:53 UTC (1351239413)
[ 0.776874] Freeing unused kernel memory: 760k freed
[ 0.776957] Write protecting the kernel read-only data: 8192k
[ 0.780137] Freeing unused kernel memory: 1472k freed
[ 0.781606] Freeing unused kernel memory: 608k freed
[ 0.787240] systemd-udevd[47]: starting version 194
[ 0.813888] ACPI: bus type usb registered
[ 0.813910] usbcore: registered new interface driver usbfs
[ 0.813918] usbcore: registered new interface driver hub
[ 0.813955] usbcore: registered new device driver usb
[ 0.815211] SCSI subsystem initialized
[ 0.816356] libata version 3.00 loaded.
[ 0.816442] xhci_hcd 0000:00:14.0: >setting latency timer to 64
[ 0.816447] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.816456] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 1
[ 0.816560] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
[ 0.816578] xhci_hcd 0000:00:14.0: >irq 21, io mem 0xd3a00000
[ 0.816632] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
[ 0.816791] xHCI xhci_add_endpoint called for root hub
[ 0.816793] xHCI xhci_check_bandwidth called for root hub
[ 0.816874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.816904] hub 1-0:1.0: >USB hub found
[ 0.816914] hub 1-0:1.0: >4 ports detected
[ 0.817280] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.817286] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 2
[ 0.817469] xHCI xhci_add_endpoint called for root hub
[ 0.817471] xHCI xhci_check_bandwidth called for root hub
[ 0.817493] hub 2-0:1.0: >USB hub found
[ 0.817500] hub 2-0:1.0: >4 ports detected
[ 0.822755] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[ 0.822761] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[ 0.822768] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[ 0.822798] ehci_hcd 0000:00:1a.0: >debug port 2
[ 0.826690] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[ 0.826709] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xd3a19000
[ 0.835913] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[ 0.836049] hub 3-0:1.0: >USB hub found
[ 0.836052] hub 3-0:1.0: >2 ports detected
[ 0.836166] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.836170] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[ 0.836177] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
[ 0.836203] ehci_hcd 0000:00:1d.0: >debug port 2
[ 0.840097] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[ 0.840110] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xd3a18000
[ 0.849231] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[ 0.849353] hub 4-0:1.0: >USB hub found
[ 0.849356] hub 4-0:1.0: >2 ports detected
[ 0.849406] ahci 0000:00:1f.2: >version 3.0
[ 0.849473] ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
[ 0.849524] ahci: SSS flag set, parallel bus scan disabled
[ 0.862579] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.862582] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 0.862586] ahci 0000:00:1f.2: >setting latency timer to 64
[ 0.869649] scsi0 : ahci
[ 0.869722] scsi1 : ahci
[ 0.869780] scsi2 : ahci
[ 0.869834] scsi3 : ahci
[ 0.869889] scsi4 : ahci
[ 0.869943] scsi5 : ahci
[ 0.870010] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 42
[ 0.870011] ata2: DUMMY
[ 0.870014] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 42
[ 0.870015] ata4: DUMMY
[ 0.870016] ata5: DUMMY
[ 0.870016] ata6: DUMMY
[ 1.142189] usb 3-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.188798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.242364] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
[ 1.242367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.244122] ata1.00: configured for UDMA/100
[ 1.244233] scsi 0:0:0:0: >Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
[ 1.265963] hub 3-1:1.0: >USB hub found
[ 1.266053] hub 3-1:1.0: >6 ports detected
[ 1.371886] usb 4-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.495531] hub 4-1:1.0: >USB hub found
[ 1.495628] hub 4-1:1.0: >6 ports detected
[ 1.561668] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.561806] usb 3-1.3: >new full-speed USB device number 3 using ehci_hcd
[ 1.566490] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 1.567395] ata3.00: configured for UDMA/100
[ 1.569763] scsi 2:0:0:0: >CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 1.572713] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.572771] sd 0:0:0:0: >[sda] Write Protect is off
[ 1.572774] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.572806] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.579557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.579561] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.579683] sr 2:0:0:0: >Attached scsi CD-ROM sr0
[ 1.588282] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.588300] Switching to clocksource tsc
[ 1.646147] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 1.646510] sd 0:0:0:0: >[sda] Attached SCSI disk
[ 1.711612] usb 3-1.4: >new high-speed USB device number 4 using ehci_hcd
[ 1.861415] usb 4-1.6: >new high-speed USB device number 3 using ehci_hcd
[ 3.905748] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.297029] systemd-udevd[165]: starting version 194
[ 6.879435] ACPI: Requesting acpi_cpufreq
[ 6.901533] Monitor-Mwait will be used to enter C-1 state
[ 6.901538] Monitor-Mwait will be used to enter C-2 state
[ 6.901542] ACPI: acpi_idle registered with cpuidle
[ 7.242423] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
[ 7.242428] ACPI: Power Button [PWRB]
[ 7.243055] ACPI: AC Adapter [ACAD] (on-line)
[ 7.243224] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 7.243227] ACPI: Sleep Button [SLPB]
[ 7.243264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 7.243282] ACPI: Lid Switch [LID0]
[ 7.243312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.243314] ACPI: Power Button [PWRF]
[ 7.250773] thermal LNXTHERM:00: >registered as thermal_zone0
[ 7.250778] ACPI: Thermal Zone [TZ00] (54 C)
[ 7.450794] ACPI: Battery Slot [BAT1] (battery present)
[ 7.582945] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612108] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612381] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612637] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612948] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 7.634516] input: Ideapad extra buttons as /devices/platform/ideapad/input/input5
[ 7.648434] Compat-wireless backport release: compat-wireless-v3.6-rc6-1-npc
[ 7.648436] Backport based on linux-stable.git v3.6-rc6
[ 7.648436] compat.git: linux-stable.git
[ 7.734886] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 7.734890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734893] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 7.734896] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[ 7.734898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734899] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.737294] mei 0000:00:16.0: >setting latency timer to 64
[ 7.737362] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
[ 7.743686] mei 0000:00:16.0: >wd: failed to find the client
[ 7.757142] agpgart-intel 0000:00:00.0: >Intel Ivybridge Chipset
[ 7.757223] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
[ 7.758105] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory
[ 7.758213] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xe0000000
[ 7.972440] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
[ 7.972474] alx 0000:02:00.0: >DMA to 64-BIT addresses
[ 7.972555] alx 0000:02:00.0: >(unregistered net_device): HW Flags = 0x15
[ 7.973019] alx 0000:02:00.0: >(unregistered net_device): reset PHY, pws = 1, az = 0, ptp = 0
[ 7.974361] alx 0000:02:00.0: >(unregistered net_device): speed = 0x2f, autoneg = 1
[ 7.975707] alx 0000:02:00.0: >irq 44 for MSI/MSI-X
[ 7.975824] alx: Atheros Gigabit Network Connection
[ 7.977650] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[ 8.008080] [drm] Initialized drm 1.1.0 20060810
[ 8.066122] iTCO_vendor_support: vendor-support=0
[ 8.075437] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.078855] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 8.078971] scsi 6:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 8.080194] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
[ 8.080898] usbcore: registered new interface driver rts5139
[ 8.166428] cfg80211: Calling CRDA to update world regulatory domain
[ 8.175247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.175288] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.175343] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.188460] Linux media interface: v0.10
[ 8.307532] Linux video capture interface: v2.00
[ 8.337832] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[ 8.339661] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6
[ 8.339707] usbcore: registered new interface driver uvcvideo
[ 8.339708] USB Video Class driver (1.1.1)
[ 8.477762] Bluetooth: Core ver 2.16
[ 8.477776] NET: Registered protocol family 31
[ 8.477777] Bluetooth: HCI device and connection manager initialized
[ 8.477779] Bluetooth: HCI socket layer initialized
[ 8.477780] Bluetooth: L2CAP socket layer initialized
[ 8.477784] Bluetooth: SCO socket layer initialized
[ 8.491954] usbcore: registered new interface driver btusb
[ 8.639211] hda_codec: CX20590: BIOS auto-probing.
[ 8.640020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.672690] psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 8.697264] psmouse serio1: >elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 8.709692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.709766] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.709813] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.710242] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 8.710247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.710479] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 8.710481] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 8.710502] Console: switching to colour dummy device 80x25
[ 8.710580] i915 0000:00:02.0: >setting latency timer to 64
[ 8.744483] i915 0000:00:02.0: >irq 46 for MSI/MSI-X
[ 8.744490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.744491] [drm] Driver supports precise vblank timestamp query.
[ 8.745029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.745030] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 8.825185] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 9.132101] nvidia: disagrees about version of symbol module_layout
[ 9.243757] usbcore: registered new interface driver ath3k
[ 9.265032] usb 3-1.3: >USB disconnect, device number 3
[ 9.265920] systemd-udevd[329]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh --remove 189 258': No such file or directory
[ 9.273016] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 9.400084] ath: EEPROM regdomain: 0x65
[ 9.400085] ath: EEPROM indicates we should expect a direct regpair map
[ 9.400087] ath: Country alpha2 being used: 00
[ 9.400088] ath: Regpair used: 0x65
[ 9.421060] fbcon: inteldrmfb (fb0) is primary device
[ 9.487637] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
[ 9.487781] Registered led device: ath9k-phy0
[ 9.487785] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc900050e0000, irq=17
[ 9.552614] kvm: disabled by bios
[ 9.556577] kvm: disabled by bios
[ 9.601270] Console: switching to colour frame buffer device 170x48
[ 9.602975] fb0: inteldrmfb frame buffer device
[ 9.602976] drm: registered panic notifier
[ 9.603101] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.605310] acpi device:38: >registered as cooling_device4
[ 9.605524] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 9.605938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input12
[ 9.611483] acpi device:44: >registered as cooling_device5
[ 9.611810] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.611971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 9.612048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.960891] usb 3-1.3: >new full-speed USB device number 5 using ehci_hcd
[ 10.048160] systemd-udevd[343]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh 189 260 e0': No such file or directory
[ 11.761061] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 11.956330] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.074341] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.321742] fuse init (API version 7.19)
[ 12.703502] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.770085] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.840886] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.906640] Adding 16016768k swap on /dev/sda6. Priority:-1 extents:1 across:16016768k
I'm sorry for my English.
Last edited by Kot Dymok (2012-10-26 08:29:53)

I don't see any messages of loading nvidia ("NVRM") or nouveau. Are you sure that you have installed a module that is compatible with your current kernel?
You'll also need to patch your ACPI handle or the nouveau/nvidia driver will refuse to load at all, see https://github.com/Bumblebee-Project/bbswitch/issues/2 (this is specific to some machines, your Lenovo G580 machine included)
Last edited by Lekensteyn (2012-10-29 14:52:55)

HP Deskjet 3050a cannot find network printer

I need to find out what my IP address is for my printer. I may have changed it accidently when I was trying to set up my printer to a new router. I have reset the default settings. I have tried to go to HP file where it says I can change my IP address and I get the error "cannot find network printer". I have done all of the obvious deinstall, reinstall, added MAC address to router. Nothing will recognize my printer. Please help. Thank you

Hello again,
OK, thanks for the updated information. Try these steps...
Changing wireless settings
If you decide to change the wireless network settings for your wireless home network, you will need to configure your wireless printer with the new settings.
To configure the new wireless settings on a printer that features a Wireless Setup Wizard:
From the printer’s control panel, open the Wireless Settings menu. Many products provide access to the Wireless Settings by pressing the Wireless Button or touching the Wireless icon on the printer’s control panel. Consult the printer’s help documentation if you do not know how to access the Wireless Settings menu.
From the Wireless Settings menu select Wireless Setup Wizard. The Wireless Setup Wizard will guide you through the process of configuring your printer with the new wireless settings. Input your Wireless Network Name and Wireless Password when prompted.
You can print a Wireless Network Test report from the Wireless settings menu to confirm the printer was successfully connected to your network.
To configure your wireless settings on a printer that does not feature a Wireless Setup Wizard:
First, make sure your computer is connected to your network. You will also need a USB cable, which is temporarily used during the configuration. Be sure NOT to connect the USB cable between the computer and printer until instructed to do so by the software.
If your HP printer software is already installed on your computer Windows XP, Windows Vista or Windows 7:
Use Start -> Programs -> HP -> <your printer model> -> Printer Setup & Software. Windows 8:
Launch the Printer Software from the Start screen (icon for the printer model name) or from the tile named for your printer.
Select (click or touch) Utilities on the top of the Printer Software screen
Select Printer Setup & Software
Also,
Link below for some useful information on getting your printer back on the network........Good Luck!
http://www.hp.com/global/us/en/wireless/reconfiguring-system-help3.html
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

My laptop cannot find my printer

Hello - my OS is Windows 7 Home Premium and my printer is HP Officejet 4630. Both laptop and printer are connected to my wireless router, but my laptop cannot find my printer. I have gone through all of the instructions given on both the CD setup that came with the printer and online setup (several times). What am I missing?

Hello me-n-oc,
Welcome to the HP Forums! I understand you are unable to connect the Officejet 4630 wireless during the installation. Please follow this HP document on 'Unable to find printer' Error Message Displays on the Computer During a Wireless Network Installati...
If these steps don't resolve your issue, then try connecting this printer over a USB cable. Next, please follow this HP document on Convert from a USB connected printer to wireless.
Let me know how your progress goes.
I worked on behalf of HP.

Upgrade from server 10.4.11 to 10.5 cannot find OS

Greetings all,
I have an Xserve running 10.4.11 and I am trying to upgrade it to 10.5. When I run the setup assistant it initially doesn't see the OS RAID partition (two 500GB drives, RAID level 1). If I open the disk utility and select the parent of the RAID partition, the disk becomes visible in the select target screen, however after it runs through the installation pre-calculation I get a message telling me that the setup assistant cannot find OS X on the installation target.
I am at a loss here, the mirror is healthy and works properly but I cannot get the installer past this point.
The only offhand thought I have is that it might have something to do with the RAID version--Disk Utility tells me that the mirror is "Version 1.0" and gives me the option to update to version 2.0) but even after several hours worth of searching I can't find any information on this distinction and I am not about to try it if there is a chance that the upgrade still fails and I'm left with a 10.4 install that cannot boot.
Any thoughts or ideas would be immensely appreciated, thanks in advance.

I had similar problems upgrading same configuration even after converting to version 2 RAID sw.
I think I cloned boot drive to non RAID ext. drive, did the upgrade and cloned back to freshly in 10.5 configured RAID 1 setup.
Your milage may vary. diskutil (man diskutil) can be used to convert RAID v1 ->v2.

Cannot find setup cd

Similar Messages

Maybe you are looking for