Cannot find the CMS server running on port 6400?

Hi all,
I can see all the servers running on bo xi 2 other than the CMS server. If i start running using Administorator nor through the windows administration it displays the message
"Cannot find the CMS server running on port 6400?"
Can anyone explain me how to recitify this issue ?
Thanks
Pooja

On the CMS server launch the CCM and then the CMS is likely red (not started) try to manually start it, if it fails check windows event viewer for errors to see why it failed. Could be the service account (try local system if not specified already).
Regards,
Tim

Similar Messages

  • Thunderbird stopped downloading emails from the web server and now when I try to add a new account I get a message to say it cannot find the email server.

    Thunderbird was working and then for no reason it stopped downloading emails from the web server. I can access my emails in the web server okay. I have tried to remove my account and then add it again as a new account but I get a message saying that Thunderbird cannot find the email server. I have also tried to uninstall and reinstall Thunderbird but with the same result. I have also tried to remove the default mail server but have been unable to do so. How can I fix this?

    I figured out a workaround.... Since I can get e-mails to populate via iSync and my other computer is running Leopard (it's a powerpc chip and can't run Snow Leopard), I added the account on the other computer and got the new account to populate into my SL machine with iSync. I don't like that I can't actually add the account directly, but at least this got me working.

  • "Cannot find the DHCP server" message in 2012 R2

    Hello All,
    I am running Server 2012 R2 with a DHCP server running on it(usually).  Every few days or so, when I go into my DHCP console, I click on my server and I get the above message written in the topic of this thread??  Does anyone know why this is happening? 
    The server is literally on all the time.  It mentions that the DHCP service isn't running, but what can be shutting that down?  From what I have tried, the only way for me to rectifiy the issue is to do a restart during non-peak hours and the DHCP
    server comes right up no problem.  It doesn't seem like I am having DHCP problems in my organization even though this message is up.  Any ideas?
    Thanks,
    Chris

    Hi Chris,
    How are things going?
    Based on your description, you get “Cannot find the DHCP server” message, but it seems that the DHCP services in your organization has no problems.
    I agree with Jugganutz1871. In addition, have you recently made some changes in your DHCP server or your network? Such as, there are some cases with firewall.
    If there are any updates, please feel free to let us know.
    Best Regards,
    Tina
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Linksys EA6700, "Cannot find the DHCP server"

    Hello all
    I have a Linksys EA6700 router that has given me problems the three months I've had it.
    Typically I get the message "Cannot find the DHCP server" or no message at all. I have everything from three to eight PC's, SqueezeBoxes, Blu-ray players etc hooked up to it.
    Very often one or several of these cannot find the server.
    Is there an easy solution to this problem?
    Any help appreciated!
    Jan

    You can set static ip information on wireless devices that don't connect to other wireless networks.
    Use software like "Wifi Analyzer" for andriod or "inSSIDer" for PC.
    Make sure your wireless signals channels don't overlap with other strong wireless signals and space your wireless channels at least 3 or more channels apart.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Cannot find the installer"server/Linux 64/DisK.. Erron on Informatica 8.6.1

    Hi Friends,
    I am trying to install Power Centre Informatica 8.6.1 (64 bit) on RHEL 5.4 (64 bit) and while invoking the installer i am getting the following error:
    cannot find the installer "server/Linux 64/Disk1/Instdata/VM/install.bin
    Please let me know the fix.
    Regards,
    DB

    Hi,
    This is the data mining forum so we don't have anything to offer for Informatica installation issues.
    I am not sure what forum to recommend given Informatica is not an Oracle product.
    You could try the data base general forum:
    General Database Discussions
    Thanks, Mark

  • Cannot find the proxy server even after following the advice in the help section

    I successfully downloaded the latest version but I cannot connect to the internet. I get a "cannot find the proxy server" prompt. I have followed the advice in the help section but nothing seems to work.

    You can check20the connection settings here:
    *Tools > Options > Advanced : Network : Connection > Settings
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

  • Server Admin suddenly cannot find the host it runs on

    I am running mac osx server, snow leopard. It ran fine until just recently. Suddenly Server App is unable to find the host it runs on.
    I enter the hosts IP address on the local network, log in with my administrator username and password, and the system comes back telling me
    Could not connect to <ip address>
    Server Admin was unable to connect to the server at <~ip address>
    Server Preferences tells me that this host cannot be found on the network too.
    Point is however that both these apps run on the host with that very IP address. It is set up in System Preferences > Network, and is hardcoded, not given by the DHCP server in the router. I can also connect to the web server running on this host using the laptop and an ipad.
    This is quite annoying, especially as Server Admin is the only app that lets you manage the host it runs.
    Mac mini, OS X Server, version os os x server is 10.6.8

    relais:~ locadmin$ sudo changeip -checkhostname
    Password:
    Primary address     = 192.168.39.200
    Current HostName    = relais.local
    The DNS hostname is not available, please repair DNS and re-run this tool.
    dirserv:success = "success"
    and
    relais:~ locadmin$ sudo lsof -i -P | grep ':311'
    relais:~ locadmin$
    The log is telling about a crash in servermgrd, which is restarted and crashing every ten seconds, a bit from the crash report
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   com.apple.CoreFoundation                0x00007fff89aa244f __CFTypeCollectionRetain + 191
    1   com.apple.CoreFoundation                0x00007fff89aabca5 __CFBasicHashAddValue + 53
    2   com.apple.CoreFoundation                0x00007fff89ab3688 CFBasicHashSetValue + 184
    3   com.apple.CoreFoundation                0x00007fff89ab34a7 CFDictionarySetValue + 199
    4   com.apple.servermgr_dns                 0x00000001031bbd66 addDataToDictionary + 2549
    5   com.apple.servermgr_dns                 0x00000001031bc6ec yyparse + 2324
    6   com.apple.servermgr_dns                 0x00000001031bd7a6 parseFile + 384
    7   com.apple.servermgr_dns                 0x00000001031dac19 optionsParser_lex_destroy + 104800
    8   com.apple.servermgr_dns                 0x00000001031d6406 optionsParser_lex_destroy + 86349
    9   com.apple.servermgr_dns                 0x00000001031d6468 optionsParser_lex_destroy + 86447
    10  com.apple.servermgr_dns                 0x00000001031ce904 optionsParser_lex_destroy + 54859
    11  com.apple.servermgr_dns                 0x00000001031cea41 optionsParser_lex_destroy + 55176
    12  com.apple.servermgr_dns                 0x00000001031d19c8 optionsParser_lex_destroy + 67343
    13  com.apple.servermgr_dns                 0x00000001031c1f78 optionsParser_lex_destroy + 3263
    14  com.apple.servermgr_dns                 0x00000001031c67db optionsParser_lex_destroy + 21794
    15  com.apple.servermgr_dns                 0x00000001031c254b optionsParser_lex_destroy + 4754
    16  libservermgrcommon.dylib                0x000000010003ec18 -[BundleManager init] + 402
    17  libservermgrcommon.dylib                0x000000010003dd9d +[BundleManager defaultManager] + 51
    18  com.apple.ServerManagerDaemon           0x0000000100003bcb 0x100000000 + 15307
    19  com.apple.ServerManagerDaemon           0x00000001000014c0 0x100000000 + 5312
    So it looks like there is some t=file that is now not exactly like the parser wants it.

  • TS3408 I have a MacBook Air and suddenly Safari cannot find the Facebook server. I am out of my home country but no problem with my iPhone. Laptop was no problem either until now. Any recommendation?

    I have a Mac Air and suddenly Safari can't find the Facebook server. I am out of my home countryt but no problem with my iPhone's Safari. Any recommendations? I would like to put some pictures on Facebook from iPhoto. Thanks.

    you cannot keep up with all of the interfaces 'cause they do not even allow you to use the older os.
    You should be able to upgrade to Mountain Lion via the App Store applicaiton on your Macbook Air.   You do not have to upgrade, but it should be an option.
    I can't even get an ichat acct 'cause, help?
    iChat can use AOL Instant Messenger accounts (they are free), iChat can use Google Talk (Jabber) accounts (actually any Jabber based chat service).   And if you upgrade to Mountain Lion, you shoul be able to get an Apple iCloud account that can be used with the Messages replacement for iChat (think of Messages as being iChat renamed, with additional features).
    Oh and my battery very close to a year after buying it, which is one of the reasons I was so called to it, the battery life.  Well, having it stripped down to minimal usage, while working on nothing crazy, I could be cordless from nevver reahing 100% anymore, just under that, but gets to 20 percent in about 3 hours. No audio, no video, light low, it bothers me anyway.  Please, this is also a huge problem.
    Every battery today, has a limited number of recharges (not just Apple's).   Depending on how many times it has been recharged, will affect how much power it will eventually hold. <http://www.apple.com/batteries/>
    I know that generally after about 2 years of use (my use, not yours) I find that my batteries have very little life left in them (I frequently have my devices plugged in, so running fully on batteries only is most likely less than yours).
    You can have your battery replaced by Apple (for a fee) or by an authorized Apple repair facility.

  • I would like to upgrade my firefox but when I do it cannot find the proxy server

    When I try to up grade to the new firefox 5.o from the 3.5 I currently have it cannot find my proxy server and I do not know how to fix this

    In current Firefox versions the default connection settings are set to "Use the system proxy settings".
    You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]
    * [[Server not found]]

  • Invoke-CMReport cannot find the report server

    I'm having trouble getting the invoke-cmreport commandlet to run properly.  I know there are some challenges with the parameters, but I keep getting an error "Could not find a Reporting Services Point on site DV0 and server iodwdbs091.dev.#####.org".
     Here is the command I am trying to run:
    Invoke-CMReport -ReportPath '/ConfigMgr_DV0/Alerts/Alerts Generated Most Often' -SiteCode DV0 -SrsServerName iodwdbs091.dev.#######.org
    Is there any reference material or examples of how to run this?

    The reference documentation is located here:
    http://technet.microsoft.com/en-us/library/jj870923(v=sc.20).aspx
    Also, I just ran a quick test and I have no problems with connecting to the reporting services. That's pretty straight forward, the problems start after that. After connecting to the reporting services it seems to connect to the "old" formed URL
    from pre-reporting services. It might be an idea to log this on Microsoft Connect. In the mean time see:
    http://www.reddit.com/r/PowerShell/comments/1mlxc7/how_should_i_extract_sccm_2012_information_via/
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • HT201210 iTunes cannot find the update server

    After months and months of not being able to update my iPhone 4 to the new technology due to storage usage, i was finally able to. Now after two hours of waiting, my phone says it was verifying the update. My phone turned off and then turned back on and i got the plug into iTunes icon. After i plugged it in it says that the iPhone update server cannot be found.

    Temporarily disable any security software on the computer then try the update again.

  • I got a new ipad, but i can't activate because cannot find the itune server

    how to activate my new ipad

    Realllly really that busy yes.
    Millions and millions and millions of people on it now.
    The entire planet Earth is trying to download the same thing at the same time.
    Give it some time.   

  • Mail not being able to find the SMTP server

    hi there,
    I am trying to use a new mailbox account but Mail cannot find the SMTP server and refuses to send emails. It is a pop account and it can find the incoming server ok. I know that the server is ok because I can send emails from a webmail version of the account but in Mail..nada.
    Does anyone know why Mail is not finding the server?
    Many thanks
    Shark

    What version of OSX were you using before upgrading to Snow Leopard? Since introduction of Leopard and Mail 3.x, the Outbox has only been seen in the Sidebar when there is one or more messages not yet sent.
    Sending with webmail is no test of the SMTP, since it is not used when sending via webmail. What Port are you presenting the SMTP on, and what does the provider recommend in that regard? Who is that provider?
    Ernie

  • Weblogic Server error: "The system cannot find the path specified."

    Hi. I'm trying to run a Java EE web application, but as soon as I launch the Weblogic I get the next message several times on the DefaultServer Log: "The system cannot find the path specified"
    Here's the complete log:
    *** Using port 7101 ***
    C:\Users\Nicolás\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\bin\startWebLogic.cmd
    [ waiting for the server to complete its initialization... ]
    The system cannot find the path specified.
    JAVA Memory arguments:
    WLS Start Mode=Development
    CLASSPATH=
    PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Ulead Systems\MPEG;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\TortoiseSVN\bin;/3E
    The system cannot find the path specified.
    The system cannot find the path specified.
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    Starting WLS with line:
    \bin\java -Dweblogic.Name= -Djava.security.policy=\server\lib\weblogic.policy
    Process exited.
    I can run my programs perfectly on another machine with Windows XP. I've got a new machine with Vista Home Premium 64, but I have been never able to launch the server. I don't know if this has something to do with the system environment variables.
    I'm using JDeveloper Studio Edition Version 11.1.1.1.0, and Weblogic Server 10.3.
    Thanks in advance! :)

    Hi,
    Try this.
    Edit your registry and go to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem
    Change the value for NtfsDisable8dot3NameCreation to 1 (if the key does not exist, create a DWORD key with that name and set the value to 1).
    Delete your DefaultDomain folder from the system folder.
    Restart the machine, start the jdev and run the page.
    Reference : http://support.microsoft.com/kb/121007
    -Arun

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

Maybe you are looking for

  • Ad Hoc laptop to h470 portable printer

    I would like to setup an adhoc wireless relationship between my laptop running windows 7 64 bit and my h470 portable printer with an hp wireless adapter. I've tried everything hp has to offer to date. Has anyone out there achieved same or similar. I

  • Cannot View Thumbnails in Full Screen

    I imported 195 photo from my SD memory card to iphotos. I had a problem importing a .avi file to iphotos when I was importing the 195 photos which warranted a force quit to bypass the spinning beachball. The pictures all now show in Thumbnails and wh

  • Oracle application having problem on PIX to ASA L2L tunnel.

    Hi ALL, My customer has performed a PIX migration to ASA5520 on last weekend. And the configuration on the new ASA5520 is almost the same as the original PIX515. There are several L2L vpn tunnel configuration on the ASA5520. After the migration, all

  • Restoring a backed up lrcat after a crashed drive?

    I found my lrcat file on my cloud backup but having trouble getting LR5 to open it.  Error reads: "The Lightroom catalog cannot be used because the parent folder "Users/folderA/Desktop/Users/FolderA/Documents" does not allow files to be created with

  • How can I edit my iweb published site when the domain file is empty?

    How can I edit my iweb site when the domain file opens up empty? I have the site backed up in mobile me, on my computer, and on an external hard drive. How can I transfer these files into iweb?