Cannot find the Config DN or the Searchbase: OAM

Hello,
I'm getting a "Cannot find the Config DN or the Searchbase" error when I try to configure the Identity Server via the webpass console. I have installed the Identity Server and Webpass successfully. I'm using ADSI to connect to AD, which is my Directory Sever.
I am using implicit bind with ADSI. the user that is being used is an enterprise admin in the top level domain. The IIS 6 web server is also running with anonymous access as this same user. I have tried to configure my users to exist in a child domain while the configuration information lives in the top level domain. I extended schema in the top level domain. When this did not work, I tried to make both users and config data in the top level domain, which did not work either.
Any suggestions why I'm getting this error?
Thanks.

Hi,
Unfortunately that's a bit of a catchall error message, it could mean any of:
- the schema is not correct ;
- a typo in the config dn or searchbase ;
- insufficient access rights ;
- wrong/invalid person object class entered.
Probably other stuff as well. My first thought would be to re-check the schema - if you updated in manually did you use the ADSchema.ldif file, and does the MMC Schema add-in definitely show all the oblix* objectclasses in the schema of the instance that you're connecting to?
If all else fails, it will be necessary to have a look at the AD logs to see whcih ldap call from OAM is causing the problem (and/or the Identity Server at TRACE level).
Regards,
Colin

Similar Messages

Discussion forum Cannot find the configuration file config\common\bc4j.xcfg

I successfully deployed the discussion form portlet and registered it with portal. I can reach the provider test page at Http://myserver:7777/forum/providers/forum
Everything seems to be good except when I add the portlet to a page, and then view the page, I see an error in the portlet:
"Unable to perform the operation: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-33001: Cannot find the configuration file config\common\bc4j.xcfg in the classpath"
I have verified that bc4j.xcfg (as I have modified it) exists in:
$IAS_HOME\j2ee\OC4J_Portal\applications\forum\forum\WEB-INF\classes\config\common
I followed the instructions exactly. Does anyone know how to resolve this error? I'm running portal 9.0.2.3.0B, PDK 9.0.2.6.2 and the latest discussion forum download (downloaded 7/1/2004)
Many thanks in advance!

No ideas anyone?

Running config.cmd produces - The system cannot find the path specified

I had successfuly installed Weblgic/OSB and cofigured a domain on 64 bit windows 2008
I then uninstalled all components and re-installed everything |( including deleting all directires ) .
When I come to run config.cmd to create the OSB Weblogic domain I get :-
The system cannot find the path specified
I have set echo on and can see that the cmd file is attempting to acces directories that do not exist - so the command file is getting wrong info from somewhere but I just cannot figure out from where. I donlt think its a script issue, its more like an issue with some setting somewhere in windows regirsty or some cache that its pulinng it in from - the wrong directoties displayed seem to look like my existing dir's with ~1 and ~2 on the end.
Any ideas suggestions greatly received.

I have not edited any of the scipts at all - they are as they have been laid down byt the install.
Contents of E:\Oracle\Middleware\Oracle_OSB1\common\bin\config.cmd below
@ECHO ON
SETLOCAL
@REM Determine the location of this script...
SET SCRIPTPATH=%~dp0
FOR %%i IN ("%SCRIPTPATH%") DO SET SCRIPTPATH=%%~fsi
@REM Set the ORACLE_HOME relative to this script...
FOR %%i IN ("%SCRIPTPATH%\..\..") DO SET ORACLE_HOME=%%~fsi
@REM Set the MW_HOME relative to the ORACLE_HOME...
FOR %%i IN ("%ORACLE_HOME%\..") DO SET MW_HOME=%%~fsi
@REM Set the home directories...
CALL "%SCRIPTPATH%\setHomeDirs.cmd"
@REM Set the config jvm args...
SET CONFIG_JVM_ARGS=%CONFIG_JVM_ARGS% -DCOMMON_COMPONENTS_HOME=%COMMON_COMPONENTS_HOME%
@REM Delegate to the main script...
CALL "%WL_HOME%\common\bin\config.cmd" %*
ENDLOCALContents of E:\Oracle\Middleware\Oracle_OSB1\common\bin\setHomeDirs.cmd
@ECHO OFF
@REM Temporary workaround: normally use a hardcoded wls version (until the
@REM installer can substitute it for us); but for now, need to work with multiple
@REM versions. Choose the highest avail.
IF EXIST "%MW_HOME%\utils\config\10.3.3.0\setHomeDirs.cmd" (
SET WLS_VER=10.3.3.0
) ELSE IF EXIST "%MW_HOME%\utils\config\10.3.2.0\setHomeDirs.cmd" (
SET WLS_VER=10.3.2.0
) ELSE IF EXIST "%MW_HOME%\utils\config\10.3.1.0\setHomeDirs.cmd" (
SET WLS_VER=10.3.1.0
) ELSE (
SET WLS_VER=10.3
IF EXIST "%MW_HOME%\utils\config\%WLS_VER%\setHomeDirs.cmd" (
CALL "%MW_HOME%\utils\config\%WLS_VER%\setHomeDirs.cmd"
@REM Set common components home...
SET COMMON_COMPONENTS_HOME=%MW_HOME%\oracle_common
IF EXIST %COMMON_COMPONENTS_HOME% FOR %%i IN ("%MW_HOME%\oracle_common") DO SET COMMON_COMPONENTS_HOME=%%~fsiContents of following :-
dir /x E:\Oracle
>
Volume in drive E is Apps
Volume Serial Number is 6CF4-6338
Directory of e:\oracle
22/06/2012 13:57 <DIR> .
22/06/2012 13:57 <DIR> ..
22/06/2012 14:00 <DIR> MIDDLE~1 Middleware
0 File(s) 0 bytes
3 Dir(s) 758,748,934,144 bytes free
>
dir /x E:\Oracle\Middleware
>
Volume in drive E is Apps
Volume Serial Number is 6CF4-6338
Directory of e:\oracle\middleware
22/06/2012 14:00 <DIR> .
22/06/2012 14:00 <DIR> ..
22/06/2012 13:57 <DIR> COHERE~1.7 coherence_3.7
22/06/2012 13:57 136 DOMAIN~1.XML domain-registry.xml
22/06/2012 13:57 <DIR> logs
22/06/2012 13:57 <DIR> modules
22/06/2012 13:57 862 ocm.rsp
22/06/2012 14:02 <DIR> ORACLE~1 oracle_common
22/06/2012 14:02 <DIR> ORACLE~2 Oracle_OSB1
22/06/2012 13:57 110,518 registry.dat
22/06/2012 13:57 1,623 registry.xml
22/06/2012 13:57 <DIR> utils
22/06/2012 14:01 <DIR> WLSERV~1.3 wlserver_10.3
4 File(s) 113,139 bytes
9 Dir(s) 758,748,934,144 bytes free
>
dir /x E:\Oracle\MIDDLE~1\ORACLE~2\common\bin
>
Volume in drive E is Apps
Volume Serial Number is 6CF4-6338
Directory of e:\oracle\middle~1\oracle~2\common\bin
22/06/2012 14:03 <DIR> .
22/06/2012 14:03 <DIR> ..
20/01/2010 15:11 640 CONFIG~1.CMD config - Copy.cmd
22/06/2012 14:03 639 config.cmd
20/01/2010 15:11 777 config.sh
20/01/2010 15:11 638 pack.cmd
20/01/2010 15:11 773 pack.sh
20/01/2010 15:11 828 SETHOM~1.CMD setHomeDirs.cmd
27/04/2010 06:04 839 SETHOM~1.SH setHomeDirs.sh
20/01/2010 15:11 640 unpack.cmd
20/01/2010 15:11 777 unpack.sh
20/01/2010 15:11 538 WAS_CO~1.CMD was_config.cmd
20/01/2010 15:11 638 WAS_CO~1.SH was_config.sh
20/01/2010 15:11 1,344 wlst.cmd
20/01/2010 15:11 1,579 wlst.sh
20/01/2010 15:11 632 wsadmin.cmd
27/04/2010 06:04 739 wsadmin.sh
15 File(s) 12,021 bytes
2 Dir(s) 758,748,934,144 bytes free
>
And also I am able to do the following :
dir /x E:\oracle\MIDDLE~1\ORACLE~2\common\bin\setHomeDirs.cmd - ouptu below..
>
Volume in drive E is Apps
Volume Serial Number is 6CF4-6338
Directory of e:\oracle\MIDDLE~1\ORACLE~2\common\bin
20/01/2010 15:11 828 SETHOM~1.CMD setHomeDirs.cmd
1 File(s) 828 bytes
0 Dir(s) 758,748,606,464 bytes free
>
So everythings look ok to me.
So, it still begs the question why does my config.cmd script fall over doing the following :
CALL "E:\oracle\MIDDLE~1\ORACLE~2\common\bin\\setHomeDirs.cmd"
The system cannot find the path specified

Sync archive is successful, but cannot find latest config file in the config viewer

Sync archive is successful, but cannot find latest config file in the config viewer, Prime LMS 4.2.4

Hi,
Go Admin > Collection Settings > Config > Config Archive Settings
Make sure enable shadow directory is Checked
Also check you have folders like shadow , devfiles ..etc under NMSROOT/CSCOpx/files/rme/dcma
If these folders are missing ... then it is a database issue..
if files and folders are fine then check if it happening for any particulr device or set of devices or all the devices ?
Thanks-
Afroz
***Ratings Encourages Contributors ***

Oracle Access Manager Configuration : Cannot find the Person Object Class

Hi,
I am trying to install OAM , I am getting the following error when i am configuring the Identity server for the first time.
1) I have installed OID. I am using one OID for both config and user data.
2) I have installed Identity server and have modified the OID schema automically during installation.
3) I have installed web pass.
I have gone to the url: http://trn-ps-oid.oracle.com:7777/identity/oblix
Here i gone to Identity System Console to configure Identity server.
Following are the config data i have given
Configuration DN : dc=mydomain,dc=com
Search Base : dc=mydomain,dc=com
Host : mypc.mydomain.com
Port Number : 389
Root DN : cn=orcladmin
Root Password : *******
Directory Server Security Mode : Open
Is the Configuration data stored in this directory also : Yes
Person Object Class : inetorgperson
Auto configure objectclass : yes
Group Object Class : groupOfUniqueNames
Auto configure objectclass : yes
After this I have clicked on the restart server button.
It comes back to the page asking to enter Person Object class details.
I Get the Error : Cannot find the Person Object Class.
I have checked the object class in OID it is there, I have verified the connection details are also correct.
Any Ideas what might be wrong.
Earlier during setup i had to modify the OID schema, how do i check if this has been done.
Any Ideas

<?xml version="1.0" encoding="utf-8"?>
<ValNameList
xmlns="http://www.oblix.com"
ListName="setup.xml">
<NameValPair
ParamName="mainOIS"
Value="true"></NameValPair>
<NameValPair
ParamName="currentStep"
Value="LDAP_CONFIG_CHANGES"></NameValPair>
<NameValPair
ParamName="status"
Value="incomplete"></NameValPair>
<NameValPair
ParamName="whichDB"
Value="OID"></NameValPair>
<NameValPair
ParamName="dataDirCopied"
Value="TRUE"></NameValPair>
<NameValPair
ParamName="machineNo"
Value="localhost"></NameValPair>
<NameValPair
ParamName="portNo"
Value="389"></NameValPair>
<NameValPair
ParamName="rootDN"
Value="cn=orcladmin,cn=Users,dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="ldapRootPasswd"
Value="**************"></NameValPair>
<NameValPair
ParamName="securityMode"
Value="Open"></NameValPair>
<NameValPair
ParamName="oblixUserDataSame"
Value="Yes"></NameValPair>
<NameValPair
ParamName="searchBase"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="configDN"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="obClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="defaultConfigForPersonOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obClassGroup"
Value="groupOfUniqueNames"></NameValPair>
<NameValPair
ParamName="defaultConfigForGroupOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obOldClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="obOldClassGroup"
Value="groupOfUniqueNames"></NameValPair>
</ValNameList>

Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!

Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

Cannot find the configuration file in classpath

Cannot find the configuration file /oracle/apps/prc/po/....applicationModule/common/bc4j.xcfg in the classpath.
Hi!
I'm trying to run the following code:
String appModule = "oracle.apps.prc.po.manageDocument.uiModel.viewDocument.applicationModule.ViewPurchasingDocumentApplicationModule";
String cfg = "ViewPurchasingDocumentApplicationModuleLocal";
ApplicationModule applicationModule = (ApplicationModule)Configuration.createRootApplicationModule(appModule, cfg);
I get this error message:
Exception in thread "main" oracle.jbo.ConfigException: JBO-33001: Cannot find the configuration file /oracle/apps/prc/po/manageDocument/uiModel/viewDocument/applicationModule/common/bc4j.xcfg in the classpath
     at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:430)
     at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:293)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:557)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1334)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1312)
     at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.getXMLData(generateXml.java:26)
     at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.main(generateXml.java:39)
I have checked and the config file does exist in the correct directory, and I can see it in my Application Module - Configurations. Any idea why this is happening? Am I supposed to configure something specifically for this or add it in my classpath? If so, how am I supposed to do it?
Thanks
Mansi
Edited by: Mansi G on Oct 6, 2008 11:56 AM

Where is the code you posted? Running in a separate project, I assume? Does that project have a dependency on the project containing the app module specified?
And just to check (although by default, JDev should do this for you)--the app module project has been compiled since adding the configuration, right? You need to check to make sure the config exists not only under Project/src, but under Project/classes.
Edited by: Avrom Roy-Faderman on Oct 6, 2008 2:02 PM
Oh, and BTW--I assume this is not a typical ADF application, right? In a standard ADF application, you would very rarely need to instantiate an application module in code like this; you could just let the data binding facility do it for you. The technique like the one you're using is most appropriate for purely programmatic, no-UI cases. (e.g., once I tried to implement an SMTP server backed by business components. That was an appropriate case for ditching databindings and doing the sort of thing you're doing, because it had no view layer (because it had no UI to render).

"system cannot find the path specified" error when deploying EAR

I am trying to deploy a J2EE based web service created in Sun Studio 5 to the SunOne AS 7.0.
I get an error saying "The system cannot find the path specified". I have followed the deployment instructions as closely as possible I think.
When I look in the file system for the file the system is trying to find, the whole directory it seems to be looking for (C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1)
is missing. (In fact there is nothing in the j2ee apps directory).
Got any ideas? Have I missed something?
Thanks for any help,
Nick
WARNING ( 1616):      ADM1022:Deployment failed - Detailed Message:
     com.iplanet.ias.deployment.backend.IASDeploymentException: Deployment Error -- com.iplanet.ias.util.zip.ZipFileException: filename: C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1\PCSearchWebService_War_war\WEB-INF\classes\App\PostcodeValApp\PCSearchWebServiceGenServer\PCSearchWebServiceServantInterface_ValidateSSP_ResponseStruct_SOAPSerializer.class java.io.FileNotFoundException: C:\Sun\studio5_se\appserver7\domains\domain1\server1\applications\j2ee-apps\PostCodeLookupApp_1\PCSearchWebService_War_war\WEB-INF\classes\App\PostcodeValApp\PCSearchWebServiceGenServer\PCSearchWebServiceServantInterface_ValidateSSP_ResponseStruct_SOAPSerializer.class (The system cannot find the path specified)
     at com.iplanet.ias.deployment.backend.AppDeployer.doRequest(AppDeployer.java:58)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplicationArchiveOrDirectory(ManagedServerInstance.java:745)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplication(ManagedServerInstance.java:667)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

I found out the problem;
the auto-generated file name seems to have been too long for the app-server.
I changes the name of the class to PCWS and it worked fine.
It's a shame Sun One Studio (which creates these massive file names doesn't warn you!

The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

Friends,
I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
Any suggestions would be very helpful.
Thanks in Advance,
Bharath

Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
These errors come for various errors and tracing RAS would give us a better idea.
It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
Thanks,
Prithvi

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified

Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 31: <compilation debug="true">
Line 32: <assemblies>
Line 33: <add assembly="Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89B483F429C47342" />
Line 34: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
Line 35: <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
Source File: D:\AverySignatureBinders\httpsdocs\ASBNet\web.config Line: 33
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

For Adapter Pack 2013 the following Oracle Client(s) are needed:
Supported client versions: Oracle Data Access Components for Oracle Client 12.1, Oracle Data Access Components for Oracle Client 11.2.0.1
And please bear in mind that both the 32- and 64 bit versions are needed.
Morten la Cour

Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support

App Module Tester - JBO-33001: Cannot find the configuration file

I have a custom main function for my application module. Launching the tester is fine
launchTester("a.b.c.user_mnt.datamodel", "user_mntServiceLocal" );but if I comment out that line and add custom code:
String amDef = "a.b.c.user_mnt.datamodel";
String config = "user_mntServiceLocal";
ApplicationModule am = Configuration.createRootApplicationModule(amDef,config);I get the following error:
Diagnostics: (BC4J Bootstrap) Routing diagnostics to standard output
(use -Djbo.debugoutput=silent to remove)
[00] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
[01] CommonMessageBundle (language base) being initialized
[02] Configuration.loadFromClassPath() failed
[03] Stringmanager using default locale: 'en_US'
[04] oracle.jbo.ConfigException: JBO-33001: Cannot find the configuration file
/a/b/c/user_mnt/common/bc4j.xcfg in the classpathBut the bc4j.xcfg exists in
/a/b/c/user_mnt/datamodel/common/bc4j.xcfgIs there a way to change where Jdev is looking for that file?
Thank you,
Brian

Completely new workspace doesn't fix the problem.
If I move the common folder to where jdev is looking it runs fine (I get a runtime error, but it runs none-the-less).
Any help?
Brian

Cannot find the configuration file bc4j.xcfg

I have compiled my Business Components Project in JDeveloper and all Projects that reference that BC Project are pointing to the correct classes directory, but I am still getting the following error:
JBO-33001: Cannot find the configuration file /com/arca/personalinfo/bc/common/bc4j.xcfg in the classpath
I have re-compiled all my projects in JDev 9.0.3 and have double-checked that the bc4j.xcfg file is in the classes directory.
Ideas?
Thanks!
-Teri Kemple

This usually is a class path omittion.
Your Jdev jpr config [double click your jpr]
- Configurations - Development - Paths
output path is set to some place
- Libraries
- The libraries that are created for you need to have
the classpath box have your output path set.
Check your output path, then check all the library definitions
for your project. There always seems to be more than one
created for you.
Good luck curt

Cannot find the Config DN or the Searchbase: OAM

Similar Messages

Maybe you are looking for