Cannot find the DAQ Assistant Express vi on LabVIEW
I am using LabVIEW 8.6.1, and doing the lesson 8 from LabVIEW Basics I Intro manual.
LabVIEW Intermediate I level!
Solved!
Go to Solution.
Hello I actually got it solved, I installed the DAQmx driver after installing LabVIEW
http://joule.ni.com/nidu/cds/view/p/id/1216/lang/en
thanks anyway!
LabVIEW Intermediate I level!
Similar Messages
-
Can't see the "DAQ assistant express VI" in LabView7 express
i am using the LabView 7 express avaluation package, and trying to use my PCI 6132 DAQ card with it.
i cannot see the "DAQ assistant express VI" simbol in the "input" box, and therefore cannot connect to the DAQ.
all drivers are installed, and i manage to log data directly from the DAQ, using the "Measurement & Automation" software.
any ideas?
doe's the evaluation version even supports this DAQ?GilKlar,
Did you install DAQ first, or LabVIEW? The most common cause of this problem is that DAQ support was installed before LabVIEW support. In this case, the DAQ driver will not find any valid installations of LabVIEW and thus, will not install the necessary VIs. Please try repairing the DAQ installation and making sure that support for LabVIEW is checked.
If this does not solve your problem, please let us know what version of the DAQ driver you are using, as well as how you are acquiring data in MAX.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments -
I do not see the DAQ Assistant Express on Functions Input palette.
Software config: Windows XP machine, Traditional NI-DAQ 7.4.4 for PCI 6602. I do not see the DAQ Assistant express on Functions>>Input palette. I get error message when I place the Instrument I/O assistant on the block diagram:-" Measurement and Automation Explorer or Instrument I/O Assistant not installed correctly. Please install from LabVIEW CD". I've tried uninstalling, re-installing driver and rebooting my computer several times.
Hello PJ-SJM,
The DAQ Assistant Express VI installs with the NI-DAQmx Driver and not Traditional NI-DAQ. The good news is that the PCI-6602 is supported in both Traditional NI-DAQ and NI-DAQmx. Check this KnowlegeBase article to find out what version of NI-DAQmx you need and then search the Drivers and Updates page for to find the version you need. Once you download and install the driver you should see the DAQ Assistant Express VI on your functions pallet.
The Instrument I/O Assistant is not for use with DAQ cards, it is for using other communication protocol like serial or GPIB. However, if you need this you can install the Device Driver CD and it should work after that. Note: The device driver CD that came with LabVIEW should also contain the correct version of NI-DAQmx.
I hope this helps, and have a great Friday!
Brooks -
I do not have the daq assistant vi on my labview 2010 and have found no drivers for it. I downloaded the service pack but that did not have it either what should i do.
Hi Youzhang He,
Did you install LabVIEW first on your PXIe 8102 before the drivers? Most likely, you're missing LabVIEW support for your DAQmx drivers. Fortunately, this is an easy fix. What you should do is open Add/Remove Programs, select National Instruments Software, select Uninstall/Repair. In the window that pops up listing NI software, select NI-DAQmx 9.x and select Modify. In the window that appears, expand Application Development Support and select to install LabVIEW support. From here complete the install process and restart your system. LabVIEW support should be installed and DAQ Assistant should appear in your palette.
Allie -
Can't open properties window of DAQ assistant express VI.
I have a program which uses DAQ assistant express VI's, reading several channels from a NI PCI-6220 card. Its been working fine for months but now some of the channels have started acting up, noise and oscillations that are not real. I've solved this problem by changing channels before but now when I try to open up the properties window of the DAQ assistant express VI to change channels, by double clicking the icon, or by right clicking and selecting properties, nothing happens! The cursor changes to a hourglass for a second and no window pops up. I've recently upgraded from 7.0 to 8.0 but that shouldn't make a difference, and even when I tried creating a new VI, and a new DAQ assistant express VI it won't work on this either. I've tried looking at security settings etc. but no joy. Any ideas?
I would try uninstalling DAQ and reinstall. Not scientific but in most cases will fix the issue of the DAQ assistant.
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison -
MAC OS X 10.9.3 setting up 0365 exchange on mail 7.3, but cannot find the option to adjust how many days worth of mail to store. At the moment it is only synching todays mail. Please assist.
MAC OS X 10.9.3 setting up 0365 exchange on mail 7.3, but cannot find the option to adjust how many days worth of mail to store. At the moment it is only synching todays mail. Please assist.
-
Is the DAQ Assistant compatible with LabView7?
I am equipped with LabView7 and a NI DAQ-Pad 6015 and am trying to monitor temperature using two thermocouples. I have searched for some tutorials online but most suggest using DAQ assistant, which is not listed in the input section of my functions palette. I have downloaded the most recent NI-DAQmx driver which is supposed to be compatible with LabView 7.x. I'm not sure if this means that it is compatible with LabView 7.0. I still do not see the DAQ assistant appear.
Any help or suggestions (about DAQ assistant or how to program in LabView7 to solve my problem) is greatly appreciated!
Thanks.
Solved!
Go to Solution.I have installed DAQmx 8.1 and now the DAQ assistance appears. However, when I select Analog Input >> Temperature >> Thermocouple and arrive at the physical channels screen, it says "No supported devices found."
I also notice that when I open the Measurement & Automation explorer, it does not appear to detect my DAQ pad, even though the light on it is blinking Ready. A window pops up and says "Can not find RTE directory: C:\Windows\system32\cvirte" followed by "Unable to open c:\program files\national instruments\max\bin\cvirte.rsc". After clicking okay to both windows, I check under Devices and Interfaces to see that my DAQpad 6015 is not listed.
Previously before I had uninstalled everything and reinstalled using DAQmx 8.1 my device was detected, but now it doesn't seem to be detected anymore.
Also, I just realized that while it says everywhere that I have LabView7, when I start the program, the opening window has LabView7 Express written on it. I hope this isn't the cause of all the troubles.
Message Edited by Particle42 on 05-28-2009 03:19 PM -
Fourier Transform and the DAQ Assistant
Hi,
I'm trying to take the fourier transform of a analog voltage measurement in Labview 8.6 and I'm having a problem with the data.
The measurement is an anaolog input voltage signal taken using the USB-6211 box. I am acquiring the signal on ports 15 and 16 (differential) with the DAQ Assistant at a rate of 5KHz, 200 samples. The setup works perfect thankfully, and a very nice waveform plot is generated on the VI. I would now like to add a fourier transform of this plot to do some frequency analysis.
I found the FFT function, but when I tried to add the DAQ output to it, I got an error about dynamic data. It takes me to a screen which I don't understand about dynamic data conversion, and I'm not sure what to do from this point. My FFT graph is basically just a flat white line, which is wrong.
How can I just take the basic fourier transform of a waveform in this setup?Hi
Your thinking is not bad. You have only some scaling problems. You may toy with the vi I am sending. Change the log/linear control and see the result.
You will find all information you need here http://zone.ni.com/devzone/cda/tut/p/id/4541 and http://zone.ni.com/devzone/cda/tut/p/id/4541. The dt value is the reciprocal of the sample frequency(1/x) The unit is second, and it will give you the time interval between two samples.
Also note how I use the "Dynamic To Waveform Array.vi" to convert the dynamic data. This VI is not documented by NI, but you find it here ...vi.lib\express\express shared\transition.llb\Dynamic To Waveform Array.vi
Good luck
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
Spectrum Analyzer.vi 32 KB -
I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
pasting the path to the file and dragging the file to the VM, but no luck.
If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.Hi,
According to your description, I would like to confirm if you have unchecked the Express installation box.
Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
Using Parallels Desktop to install Windows and the dev tools on your Mac:
http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
Regards,
Kelvin hsu
TechNet Community Support -
"The system cannot find the file specified" - New to MVSE 2013
Hey all,
I have downloaded Visual Studio Express 2013 for Windows Desktop and am currently working my through the introduction sessions on: http://www.cplusplus.com/doc/tutorial/program_structure/
I did not get far before i encountered this error whilst trying to run my segment of code. I am completely new to all this so please bear with me :)
The error window said:
"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
The system cannot find the file specified.
Would love some simplified help please if this is indeed the right area of the forum to post this in.
Many thanks!Hi Jono112,
>>"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
Based on your issue, to check if the issue is related to the VS IDE or your specified C++ project, I suggest you can refer the following MSDN document to check if you get same issue.
https://msdn.microsoft.com/en-us/library/ms235629.aspx
(1)you get same error in the new c++ console application, maybe you will need to repair or re-install the VS2013 check this issue again.
(2)If you did not get the issue in the new c++ console, so I suggest you try to clean and build your c++ console application, then debug it again.
Or you can upload your C++ console application to OneDrive and then copy link here, we will reproduce your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am trying to use SQL Server 2008 Developer on Windows Server 2008. Whenever I try to connect to the server, I get this error: "Could not load file or assembly 'Microsoft.SqlServer.Diagnostics.STrace, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified."
I found some info at
http://blogs.msdn.com/b/ashishme/archive/2009/08/15/could-not-load-file-or-assembly-microsoft-sqlserver-diagnostics-strace-version-10-0-0-0-culture-neutral-publickeytoken-89845dcd8080cc91-or-one-of-its-dependencies-the-system-cannot-find-the-file-specified.aspx,
but this didn't help me because it is not on my system, even after reinstalling both SQL Server and .NET Framework 4. I also saw a this page: http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/1115cd55-721d-4974-99b1-d142d1e6a927,
but this also didn't fix my problem.
What can I do, or where can I get the missing assembley?
Thanks in advance.You can get the missing assembly (Microsoft.SqlServer.Diagnostics.STrace.dll)
by installing the "Shared Features" of SQL Server 2008.
You could only install SQL Server 2008
R2 (any edition) on Windows 7.
Do not install more than 1 SQL Server 2008 R2 edition
into the same computer; Some of the components are not compatible.
E.g: BIDS from R2 Express Advance edition cannot
recognize Integration Service from R2 Enterprise Trial edition - it would throw above missing dll error. -
Hello all,
This should be a pretty simple question, but I can't seem to find the answer on-line and don't currently have the capabilities to test this:
I'm using LabVIEW 8.5 and have a VI that imports sensor data through the DAQ Assistant. In the configuration tab there is a signal input range. What happens if my sensor exceeds this range? Will I get a warning? Will the value default to the maximum (or minimum)? I was interested in writing in some code to display an error as I approach the limits of this range, but was unsure if I also needed to include some code to display an error if the range is exceeded as well.
Thanks for the help,
Tristan
Solved!
Go to Solution.Hello Tristan,
The behavior depends on the range you choose and the device you are using.
If you are using a device with only one valid input range, we will use this range even if you set a smaller minimum and maximum in the DAQ Assistant. Thus, if your device only supports ±10V and you set the range to ±8V, you will still continue to get valid data after your sensor exceeds 8V until you approach 10V. Once you reach the limit of the range of your device, the output will "rail" and just return the maximum value until the signal drops below the maximum again.
Note: A device that is nominally ±10V usually has some overshoot (like ±10.2V) that is typically specced in the manual.
However, if you are using a device with multiple input ranges then things get more complex.
The NI-DAQmx drive will pick the smallest range that fully encompasses the range you choose. So, suppose your device supports the following input ranges: ±0.2V, ±1, ±5V, and ±10V and you choose 0V - 3V as the range in the DAQ assistant. The NI-DAQmx driver is going to look at your input range and the list of input ranges that your hardware supports and choose the smallest that encompasses the full range you set. This would the ±5V, because that's the only range that contains up to 3V. As a result, any input signal between ±5V will be returned and any outside this range will "rail" to either the maximum or minimum value.
We do this because using smaller ranges make more effective use of the resolution of the ADC. Thus we try to use the most efficient range based on what you request without picking a range that will cause you to miss data.
Let me know if I can clarify this further.
Seth B.
Staff Test Engineer | National Instruments
Certified LabVIEW Developer
Certified TestStand Developer
“Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams -
Soap fault, cannot find the dispatch method
I deploy the HelloService example from "The Java EE 5 Tutorial
For Sun Java System Application Server Platform Edition 9, chapter 1" to Sun Java System Application Server Platform Edition 9.0 Beta (build b32g), I tested it and it works find but when I invoked it from Servicemix-3.0 which use org.apache.servicemix.components.saaj.SaajBinding i got the following response:
<?xml version="1.0" ?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns1="http://endpoint.helloservice/"><soapenv:Body><soapenv:Fault xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>soapenv:Client</faultcode><faultstring>Cannot find the dispatch method</faultstring></soapenv:Fault></soapenv:Body></soapenv:Envelope>
Using the Monitor to look at the request message I could not see any significant difference, follows both requests:
Test:
<?xml version="1.0" ?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns1="http://endpoint.helloservice/"><soapenv:Body><ns1:sayHello><arg0>ffg</arg0></ns1:sayHello></soapenv:Body></soapenv:Envelope>
servicemix:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Header/><SOAP-ENV:Body><SOAP-ENV:Envelope xmlns:ns1="http://endpoint.helloservice/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Body> <ns1:sayHello> <arg0>Leopoldo</arg0> </ns1:sayHello> </SOAP-ENV:Body> </SOAP-ENV:Envelope></SOAP-ENV:Body></SOAP-ENV:Envelope>
The log entry detail asociate is:
Message ID: Error in decoding SOAP Message Error in decoding SOAP Message at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java
Complete Message
86) at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.toMessageInfo(SOAPMessageDispatcher.java:168) at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher$SoapInvoker.invoke(SOAPMessageDispatcher.java:533) at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:144) at com.sun.xml.ws.server.Tie.handle(Tie.java:88) at com.sun.enterprise.webservice.JAXWSServlet.doPost(JAXWSServlet.java:174) at javax.servlet.http.HttpServlet.service(HttpServlet.java:729) at javax.servlet.http.HttpServlet.service(HttpServlet.java:822) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:262) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:295) at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:178) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:390) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:279) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:174) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:223) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:664) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:571) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:846) at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:345) at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:237) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:240) at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)Caused by: javax.xml.ws.soap.SOAPFaultException: Cannot find the dispatch method at com.sun.xml.ws.encoding.soap.SOAPDecoder.raiseFault(SOAPDecoder.java:662) at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.decodeDispatchMethod(SOAPXMLDecoder.java:151) at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBodyContent(SOAPDecoder.java:335) at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBody(SOAPDecoder.java:325) at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeEnvelope(SOAPDecoder.java:248) at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java:78) ... 40 more
I shall appreciate any help on this issueAny luck? I'm having the same problem with the HelloService deployed on AS9. The service tests ok and the client code in the jwsdk2.0 runs ok. When I attempt to access the service using axis 1.4, the same error occurs. I'll keep working on it, and post a solution if/when this is resolved.
Client code:
* Copyright 2001-2004 The Apache Software Foundation.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class TestClient
public static void main(String [] args) {
try {
String endpoint =
"http://localhost:9090/helloservice/HelloService";
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpoint) );
call.setOperationName(new QName("http://soapinterop.org/", "sayHello") );
// Call to addParameter/setReturnType as described in user-guide.html
//call.addParameter("testParam",
// org.apache.axis.Constants.XSD_STRING,
// javax.xml.rpc.ParameterMode.IN);
//call.setReturnType(org.apache.axis.Constants.XSD_STRING);
String ret = (String) call.invoke( new Object[] { "Hello!" } );
System.out.println("Sent 'Hello!', got '" + ret + "'");
} catch (Exception e) {
e.printStackTrace();
}Error in decoding SOAP Message Error in decoding SOAP Message at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java
89)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.toMessageInfo(SOAPMessageDispatcher.java:187)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher$SoapInvoker.invoke(SOAPMessageDispatcher.java:571)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:145)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.enterprise.webservice.JAXWSServlet.doPost(JAXWSServlet.java:191)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Caused by: javax.xml.ws.soap.SOAPFaultException: Cannot find the dispatch method
at com.sun.xml.ws.encoding.soap.SOAPDecoder.raiseFault(SOAPDecoder.java:674)
at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.decodeDispatchMethod(SOAPXMLDecoder.java:152)
at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBodyContent(SOAPDecoder.java:337)
at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBody(SOAPDecoder.java:327)
at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeEnvelope(SOAPDecoder.java:250)
at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java:81)
... 31 more
Mesage:
<?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Body><ns1:sayHello soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="http://soapinterop.org/"><ns1:arg0 xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">Hello!</ns1:arg0></ns1:sayHello></soapenv:Body></soapenv:Envelope> -
Error message "The system cannot find the file specified." when reinstalling C3180 drivers
Hello,
I experienced scanning problems with my C3180 and the error message indicated several solutions, including to reinstall the driver.
I worked my way through the list of fixes to this option. I uninstalled the drivers, downloaded
File name:
AIO_CDA_NonNet_Full_Win_WW_130_140.exe [1/1, 290.27M]
from www.hp.com/support and attempted to install.
Just after the accept licensing screen, the system begins a screen with four steps, the first of which is Checking System. Shortly after starting this, I receive the error message "The system cannot find the file specified.". The file name may be in the message header, but I cannot determine it due to the path length. It is off the displayed screen. (see screen image capture)
Closing the pop-up error message or clicking OK terminates the installation.
I am re-installing on a Dell Latitude E6510, running Windows 7 Professional, Service Pack 1, 64 bit. The printer was connected via USB, but I have disconnected for this stage of the install.
I appreciate any assistance/advice you can offer.
KellyHi justkelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the printer to your computer.
I have a link that I would like you to click on. In the steps on the link, please do step 1 and step 2 seeing that you are using Windows 7.
Installation issues.
Please let me know if this resolved your issue. I will be more than happy to offer more assistance if the link does not resolve your issue.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Configuration error description: The system cannot find the path specified
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2012-10-26 00:24:37
End time: 2012-10-26 00:32:07
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xF57C3D6F%400xFB92A9BB
Machine Properties:
Machine name: TEST-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQL MSSQL10.SQL
Database Engine Services 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 SQL MSSQL10.SQL
SQL Server Replication 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 SQL MSSQL10.SQL
Full-Text Search 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 SQL MSAS10.SQL
Analysis Services 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 SQL MSRS10.SQL
Reporting Services 1033
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
Database Engine Services 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
SQL Server Replication 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
Full-Text Search 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 TEST MSAS10.TEST
Analysis Services 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 TEST MSRS10.TEST
Reporting Services 1033
10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER Database Engine Services
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER SQL Server Replication
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER Full-Text Search
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSAS10.SQLSERVER Analysis Services
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSRS10.SQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008
Management Tools - Basic 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Management Tools - Complete 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Enterprise Evaluation
Edition 10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\instal_sw\SQL Server 2008\SQL Server 2008\x64\setup\
Installation edition: EVAL
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,BOL,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: sqlserver2008
INSTANCENAME: SQLSERVER2008
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\instal_sw\SQL Server 2008\SQL Server 2008\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Test-PC\Test
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\SystemConfigurationCheck_Report.htmHi Maggie,
Even i am facing the same problem while installing sql server 2008 R2 on windows server 2012 R2
The required error message is provided below:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-11-24 06:23:13
End time: 2014-11-24 06:47:19
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xCEC86A55%400xFB92A9BB
Machine Properties:
Machine name: M2MBUILDTEST01
Machine processor count: 2
OS version: Windows Server 2008
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\SQL Server 2008\Developer RTM\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: swg\gverma
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: swg\gverma
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SWG\gverma
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\SQL Server 2008\Developer RTM\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: SWG\gverma
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: swg\gverma
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SWG\gverma
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\SystemConfigurationCheck_Report.htm
Maybe you are looking for
-
ITunes on iPhone 5 not working
Ever since updating to IOS 7 I haven't been to access the itunes store on my phone. The App store works perfectly but the itunes store loads and remains blank, not even my purchases are available to see! I was wondering if I'm not the only one who is
-
i have the speaker sets, but i do not have the decoder/amp. I need to know where i can purchase one of these from. This is driving me crazy as i've looked everywhere for one. Thanks
-
Will Apple kill apps allowing unauthorized access to address book?
There are many stories discussing how easy it is for apps to access and copy address book contents without ANY prior authorization. One such story: http://www.zdnet.com/blog/igeneration/ios-apps-massive-invasion-of-user-privacy/ 15138 So, what is App
-
Hello! I will be buying a new black Macbook in the US soon. As I spend a lot of time in the UK, I was wondering if you knew of any problems involved in using the UK world travel adapter on a US bought magsafe power adapter for extended periods. Would
-
Is there a way to get the hash (#) character from my keyboard without using the Characters window? British keyboard USB