Cannot find the device software to upgrade my BB 8310?

Hello all,
I am in Paris France and own a BB curve 8310. I would like uo upgrade the sofware on my BB but cant find it anywhere....
I went there http://na.blackberry.com/eng/support/downloads/download_sites.jsp, but only 2 French providers are listed (Orange and Bouygues). This weird and annoying. Fyi, if itcan help, SFR is related to Vodafone, but dunno if I can user their software. Please, can you share your expertise and advise on that?
Many thanks, best regards.
Ilanoush
My phone details;
Model: Curve 8310
Vendor ID: 118
Platform: 2.5.0.21
App Version: 4.2.2.154 (279)
PIN: 25343f9c
IMEI: 358263.01.731765.4

Have you checked this link ?
Also take a look at this page, there is helpful information. 
In case you have questions - feel free to ask.

Similar Messages

  • "Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

    I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
    I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
    I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
    However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
    pasting the path to the file and dragging the file to the VM, but no luck.
    If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

    Hi,
    According to your description, I would like to confirm if you have unchecked the Express installation box.
    Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
    I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
    Using Parallels Desktop to install Windows and the dev tools on your Mac:
    http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
    Regards,
    Kelvin hsu
    TechNet Community Support

  • HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

    I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

    Hello jlb1977,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Best of luck,
    Mario

  • Error "The system cannot find the path specified" after upgrading to R2

    Hi guys,
    I upgrade from SP1 CU3 to R2 and since then I can not display images, I get the error: 
    Failed to run the action: Instalar Windows y Configuration Manager. 
    The system cannot find the path specified. (Error: 80070003; Source: Windows)
    just finished restart after applying the operating system. I installed all the updates, I delete and add the pxe point and nothing. The fact is that I have other tasks to capture using the same step and works fine. The hardware is a Virtual Machine
    de vmware.
    If anyone has ever happened or can help would be grateful. Sorry for my English.
    Thxxx!!!!
    Executing command line: OSDSetupWindows.exe TSManager 02/03/2014 19:08:39 932 (0x03A4)
    ==============================[ OSDSetupWindows.exe ]=========================== OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Command line: "OSDSetupWindows.exe" OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Releasing: PS100084 OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Unsuccessful in releasing PS100084. 80070490. OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    !shFile.null(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,823) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Failed to open file: C:\Windows\panther\unattend\unattend.xml (0x80070003) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    this->resolveConfigFileVariables(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,423) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    setup.run(), HRESULT=80070003 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,1650) OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Exiting with code 0x80070003 OSDSetupWindows 02/03/2014 19:08:39 1028 (0x0404)
    Process completed with exit code 2147942403 TSManager 02/03/2014 19:08:39 932 (0x03A4)
    !--------------------------------------------------------------------------------------------! TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Failed to run the action: Instalar Windows y Configuration Manager.
    The system cannot find the path specified. (Error: 80070003; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
    MP server http://SCCM.domain.com. Ports 80,443. CRL=false. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting authenticator TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set authenticator in transport TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Sending StatusMessage TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting message signatures. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting the authenticator. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    CLibSMSMessageWinHttpTransport::Send: URL: SCCM.domain.com:80 CCM_POST /ccm_system/request TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Request was successful. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set a global environment variable _SMSTSLastActionRetCode=-2147024893 TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Clear local default environment TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Let the parent group (Instalar sistema operativo) decides whether to continue execution TSManager 02/03/2014 19:08:39 932 (0x03A4)
    The execution of the group (Instalar sistema operativo) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Failed to run the last action: Instalar Windows y Configuration Manager. Execution of task sequence failed.
    The system cannot find the path specified. (Error: 80070003; Source: Windows) TSManager 02/03/2014 19:08:39 932 (0x03A4)
    MP server http://SCCM.domain.com. Ports 80,443. CRL=false. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting authenticator TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Set authenticator in transport TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Sending StatusMessage TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting message signatures. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Setting the authenticator. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    CLibSMSMessageWinHttpTransport::Send: URL: SCCM.domain.com:80 CCM_POST /ccm_system/request TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Request was successful. TSManager 02/03/2014 19:08:39 932 (0x03A4)
    Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,923) TSManager 02/03/2014 19:08:56 932 (0x03A4)
    Task Sequence Engine failed! Code: enExecutionFail TSManager 02/03/2014 19:08:56 932 (0x03A4)
    **************************************************************************** TSManager 02/03/2014 19:08:56 932 (0x03A4)
    Task sequence execution failed with error code 80004005 TSManager 02/03/2014 19:08:56 932 (0x03A4)

    Hi,
    There is a workaround:
    Wait until you get to the point where you select the task sequence
    Hit “F8” to open the command prompt
    Type “diskpart” and hit return
    Type “select disk 0” and hit return
    Type “list volume” and see if the CD/DVD drive has a drive letter of C:\ or D:\. If it does move to step 6, otherwise close the command prompt and begin the staging otherwise.
    Type “select volume X” (where X is the volume number of the CD/DVD drive) and hit return
    Type “assign letter=e” and hit return (if the E:\ is already taken up use the next available letter)
    Type “list volume” and hit return to ensure the new drive letter is active
    Close down the command prompt and begin staging
    Reference:
    Failed to open unattend.xml (0×80070003) error
    http://nikifoster.wordpress.com/2012/09/07/failed-to-open-unattend-xml-0x80070003-error/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot find the driver software for my printer hp 1515

    First i found it..but then i realized that it for hp 1510 printer,so i had stopped the download. but then, itry again to download but it not show the dowload for software, it only show the utility download. what should i do? i need the driver software because i'm using netbook that there's no place for cd driver to install.i want to use my printer but can't because not install yet.where can i find the driver software download?

    Hello, 
    If your PC works on Windows 7 / 8 or 8.1, then please download and run the HP Print and Scan Doctor from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • I have lost my iphone and do not know the serial number and cannot find the device on itunes

    I am in Spain and have lost my iphone.  How do I track it

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Mac Computer
           Find My Mac can be used from Find My Phone at iCloud.com and via Find
           My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0
               9. Prey 0.6.2

  • Setup cannot find the Geforce4 4200 device

    Hello,
    I've just bought a Geforce4 4200 128MB MSI card which replaced my old voodoo3 3000 card.
    The BIOS seem to be able to communicate with the card as the card name shows when I turn on the computer.
    The problem is when I try to run the CD's setup program , it says "cannot find the device in your system".
    When I tried to view PCI information in linux , it printed out the following:
    "bus 1 , device 0 , function 0
    VGA compatible controller: PCI device 10de:0254 (nVidia corporation) (rev 163)
    IRQ 11." , and some more infromation regarding memory addresses.
    I'm running win95 on Celeron III 600MHz.
    Is the above PCI information makes sense? Why cant the windows installation find my device?
    Thank you for your responses,
    Ishai

    remove any device from system that has something to do with v. card...and all "unknown devices", reboot and try again. if not install drivers manualy...may be will work  

  • HT201302 Cannot find my device

    When I open "my computer" it does not show my device, but I can see it in iTunes.  It shows it's connected and I can access it in iTunes, but cannot find the device anywhere else.  What can I do?  How can I find my device so I can get pictures off of it?

    Have you tried resetting your phone then plugging it in?

  • Upgrade to K7N2 - Win2K cannot find bootable device

    I just tried upgrading my system to a K7N2. When Win2K loads (during the white logo'ed screen with the progress bar) it gives a BSOD with something like "Cannot find bootable device" (I forget the exact phrase). I've had to swap back to my previous MB and Win2K is fine so the disk isn't corrupt which was my first worry.
    If I booted to DOS via floppy, all FAT32 partitions were readable. If I booted using the Win2K floppies, all NTFS partitions looked fine.
    I beleive I have the HDD Access mode set correctly - it was set to LRG on my old system. (If I set it to anything else, it will just hang before Win2k loads).
    I guess (or rather hope) its a BIOS setting that's wrong, but I can't figure out which.
    This has got me stumped. Any clues/suggestions would be gratefully received.
    K7N2
    AthlonXP 2100+
    512MB PC2700
    IBM 46GB HDD (IBM-DTLA-307045)
    GeForce 4200Ti

     Uninstall the IDE controllers in the system device managers page..............reboot and install M$ reference ide contollers check them and see if that is so.....if not then you will have to manually install them...........save and exit........place the hddrive back on the other mb and see if that will get you into widows.......from there you can update the ide controllers from the MSI cd.....
    If all else fails boot the system to the windows cd and do a windows repair of the systems HAL (Hardware Abstraction Layer)
    skip the ASR and go to repair................ navigate to the  c:windows> prompt,  and type..............(example here e:  is the cdrom drive where the windows cd is loaded and c: is the drive you have windows running on.)
    copy e:i386hal.dl_ c:windowssystem32

  • Xcode cannot find the software image to install this version

    Hello,
    I have a iPhone 5 with 6.1.3 version. So, I get the message "xcode cannot find the software image to install this version" when I have connected to Organizer.
    Why? Xcode version is the lastest 4.6.2 Abril 2013.
    How to update the xcode in order to have an updated image for my iPhone 5?
    Thank you
    Jordi Saboya

    Here is some more info on the error.
    Builds fine and runs on iPhone simulator.
    OS 10.5.4
    XCode 3.1
    iPhone 2.0
    Is iPhone 3G supported?
    Error message XCode when building to device.
    "Your mobile device has encountered an unexpected error (0xE8000001)
    during the install phase: Verifying application
    Try disconnecting and powering off the device; then power the device on and reconnect it."
    I did try that and it did not work.
    Thanks again.

  • I have upgraded to Mavericks but cannot find my devices on Maps when I create directions.

    I have upgraded to Mavericks but cannot find my devices on Maps when I create directions.

    Dick,
    You should be looking in the Mavericks forum, Maps is integrated into Mavericks so you will probably find some clues there. Also here is an article you may find useful:
    http://www.macworld.com/article/2057225/get-to-know-os-x-mavericks-maps.html

  • HT4623 I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings- General. Pls help.

    I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings->General. Pls help.

    http://support.apple.com/kb/ht4623
    Sometimes older devices must be plugged into iTunes to update.
     Jackson

  • Why does my itunes say it cannot find the disc burner or software when I'm trying to burn a CD?

    Why does my itunes say it cannot find the disc burner or software when I'm trying to burn a CD? I've burned CD's before...even earlier today and all of a sudden it started saying that and wont burn my CD

    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite C655
    iTunes 11.0.0.163
    QuickTime not available
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00*****950
    Current user is not an administrator.
    The current local date and time is 2012-12-11 16:09:24.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.0.163 (x64) is currently running.
    iTunesHelper 11.0.0.163 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    <Edited by Host>

  • Upgraded to Premiere Elements 12 and unlimited storage .. Elements program cannot find the catalog.

    Upgraded to Premiere Elements 12 and unlimited storage per Adobe staff, only problems since. Once I got catalog to properly start loading to Revel the new software wrongly messaged was that it was completely up to date. Now when i tried to start Elements program cannot find the catalog. I am the type person that am willing to pay to get this resolved so who do I call? I am doing this as a hobby and this is not fun etc... many useless unpleasant hours.

    I appreciate what you are both saying -- but it is not the music that is the problem.  The video itself is NOT blocked - you can view it on a computer -- but when you try to view it on ipad/iphone the message says, "not available on this platform".  Here is a link to a video I did in Elements 9 on Tuesday:
    http://youtu.be/06TaM22SkdE
    Here is the link to the video done last night in 11:
    http://youtu.be/h353KBGkodU
    The "raw files" are both adobe flash.flv -- it's just not making sense...
    Thank you!!!

  • "The system cannot find the path specified." error message when trying to start instaling a software

    hi
    when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
    i use the windows 7

    Zohre
    What version of the CAD software are you trying to install?  Is it compatible with win 7?  Older installations (on older OS) installed to a different default location that win 7 does not have.
    Wanikiya and Dyami--Team Zigzag

Maybe you are looking for