Cannot find the maps stored in import manager during port creation

Hi All,
I am unable to find any maps that i saved in import manager during port creation ,the maps are not showing in dropdown list during port creation in console.Do i need to store the maps that i have in import manager in specific place under mdm server,so that i can see them during port creation.
All i need to do is assign my import map during inbound port creation,but i cannot find any maps in console.
Could I know whether i am storing my maps some where other than default location.
Thanks
Aravind

Hi Aravind,
First of all check the remote system assigned to ur Port. After that go to import manager. When u logon to the import manager, u get a window "Connect to source". Mention the same remote system over there.Select the file type.Browse the file and map the fields,values,field matching and save the map. then unload the repo and assign the map to the port.
Second way is, u create the port first and give any particular remote system to it. Put the file (u want to use for mapping) in the ready folder of that port and in connect to source window select the type as port, remote system(ame as used port port) and port.then map and save. unload the repo and assign the map to port. Ready folder will be in ur server at location: C drive or D drive->SAP MDM 5.5 ->server->distributions->repo name->inbound->port code->ready. For this option, Ur port type should be manual. After assigning the map u can change it to automatic or keep it manual as per ur requirement.
Hope this solves ur problem.
Regards,
Dheeraj.
Edited by: Dheeraj Kumar on May 6, 2008 9:16 AM

Similar Messages

HT1473 cannot find the music that i imported

I cannot find the music that I imported from a CD in my music library. I only see it on my c drive. I have tried bringing it over but nothing works. Any suggestions?

Try this
http://support.apple.com/kb/HT1933

"the system cannot find the path specified" when importing pictures from iphone

Hi!
I have an iPhone 5s. My computer is a Windows, with the Windows 8 OS. I have never had a problem importing pictures from my iPhone to my computer until recently. Now, whenever I try, I get this error message:
The following error occurred while importing IMG_1022.JPG:
The system cannot find the path specified.
What do you want to do?
Try again
Skip this file
Skip all files with errors"
I have tried again. I have tried skipping files. Either way, the photos and video will not import from my phone. It is filled up now and I cannot download anything else, or take any more pictures, until I get these files off the phone.
Does anyone have any ideas?
Thanks!

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Itunes for Windows 7, cannot find the album which was imported to my library

Tried to import an album from a CD to my iTunes library. The iTunes dislogue box said the music was imported but it is nowhere to be found in My iTunes Library. I attempted to download the CD again and the dialogue box said it had already been imported. Where is it ??? The operation system is Windows 7. And, I have had no such porblems in the past.

The first thing I would try is Missing Artist or Album not with others by same artist. I've also seen reports of people compaining that the Music section of iTunes doesn't list all their content. For some reason adding a new track such as the current iTunes Single of the Week is proposed, and even confirmed, as a solution, though to be honest I can't see why it would make any difference.
If you make a smart playlist that should match your recent addition does it show up in that?
tt2

VSTO 2010 Addin installed on Outlook 2007 Machine: Giving binding error - 0x80070002. The system cannot find the file specified (Fusion Log).

Fusion log:
The operation failed.
Bind result: hr = 0x80070002. The system cannot find the file specified.
Assembly manager loaded from: C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\clr.dll
Running under executable C:\PROGRA~1\MICROS~2\Office12\OUTLOOK.EXE
--- A detailed error log follows.
=== Pre-bind state information ===
LOG: User = XP-2007\Administrator
LOG: DisplayName = Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, processorArchitecture=MSIL
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, processorArchitecture=MSIL | Domain ID: 2
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Program Files/Blue Jeans/Outlook Addin/
LOG: Initial PrivatePath = NULL
LOG: Dynamic Base = NULL
LOG: Cache Base = NULL
LOG: AppName = OUTLOOK.EXE
Calling assembly : (Unknown).
===
LOG: Start binding of native image Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, PublicKeyToken=null.
WRN: No matching native image found.
LOG: IL assembly loaded from C:\Documents and Settings\Administrator\Local Settings\Application Data\assembly\dl3\LZMMEM67.CTT\397DNQ77.1W9\c337c5e7\0023f77f_891ed001\Blue Jeans Outlook Addin.dll.
The required correct settings file is present in the location C:\Program Files\Blue Jeans\Outlook Addin but the .NET created user.config in AppData have wrong entries. The machine is installed with VSTO 2010 and .NET 4.0 Client Profile. Also the KB 976477 is
already installed the registry entry EnableLocalMachineVSTO (KB 976811) is made. May someone please give me a clue on why the user.config file is created with wrong entries and also, why this assembly binding error happening?
Thanks in advance.
Prasad

this might help:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2601334c-d5cb-4f51-a99a-4d8ea9217938/userconfig-file-problem-after-upgrading-to-outlook-2010-from-2007?forum=vsto
VSTO Word add-in user.config lost every update

How to find the mapping between External Object Name and Business Obj.

Hello Gurus
Anyone who can help me? I would like to know is there any way to know Business Object is behind object associated to Context Node, it seems that for some cases is easy but for instance for object BuilHeader is not the case, at least for me. View BP_ADDR/StandardAddress, which belongs to UI Component BP_ADDR, has context node HEADER which is associated to BuilHeader. In case to enhance that object (to add new attributes), using EEWB, I need to know what is the business object behind that external name. Somehow I cannot find the mapping between external name BuilHeader and Business Object.
Kind regards
Aleksandar

Hi Aleks,
If you want to enhance Business Partner, the object you are looking at should be "BUPA" in EEWB. To my knowledge, there is no place where this kind of mapping is maintained.
Note 484597 describes where to find the Cookbook which describes the enhanceable objects and the enhancement process.
In case your requirement is to add table attributes, you can also take a look at the wiki link:
http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
Regards,
Nisha

Oracle Access Manager Configuration : Cannot find the Person Object Class

Hi,
I am trying to install OAM , I am getting the following error when i am configuring the Identity server for the first time.
1) I have installed OID. I am using one OID for both config and user data.
2) I have installed Identity server and have modified the OID schema automically during installation.
3) I have installed web pass.
I have gone to the url: http://trn-ps-oid.oracle.com:7777/identity/oblix
Here i gone to Identity System Console to configure Identity server.
Following are the config data i have given
Configuration DN : dc=mydomain,dc=com
Search Base : dc=mydomain,dc=com
Host : mypc.mydomain.com
Port Number : 389
Root DN : cn=orcladmin
Root Password : *******
Directory Server Security Mode : Open
Is the Configuration data stored in this directory also : Yes
Person Object Class : inetorgperson
Auto configure objectclass : yes
Group Object Class : groupOfUniqueNames
Auto configure objectclass : yes
After this I have clicked on the restart server button.
It comes back to the page asking to enter Person Object class details.
I Get the Error : Cannot find the Person Object Class.
I have checked the object class in OID it is there, I have verified the connection details are also correct.
Any Ideas what might be wrong.
Earlier during setup i had to modify the OID schema, how do i check if this has been done.
Any Ideas

<?xml version="1.0" encoding="utf-8"?>
<ValNameList
xmlns="http://www.oblix.com"
ListName="setup.xml">
<NameValPair
ParamName="mainOIS"
Value="true"></NameValPair>
<NameValPair
ParamName="currentStep"
Value="LDAP_CONFIG_CHANGES"></NameValPair>
<NameValPair
ParamName="status"
Value="incomplete"></NameValPair>
<NameValPair
ParamName="whichDB"
Value="OID"></NameValPair>
<NameValPair
ParamName="dataDirCopied"
Value="TRUE"></NameValPair>
<NameValPair
ParamName="machineNo"
Value="localhost"></NameValPair>
<NameValPair
ParamName="portNo"
Value="389"></NameValPair>
<NameValPair
ParamName="rootDN"
Value="cn=orcladmin,cn=Users,dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="ldapRootPasswd"
Value="**************"></NameValPair>
<NameValPair
ParamName="securityMode"
Value="Open"></NameValPair>
<NameValPair
ParamName="oblixUserDataSame"
Value="Yes"></NameValPair>
<NameValPair
ParamName="searchBase"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="configDN"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="obClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="defaultConfigForPersonOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obClassGroup"
Value="groupOfUniqueNames"></NameValPair>
<NameValPair
ParamName="defaultConfigForGroupOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obOldClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="obOldClassGroup"
Value="groupOfUniqueNames"></NameValPair>
</ValNameList>

Cannot find the Novell Connection Manager for LDAP

Novell Connection Manger for Java/LDAP
Cannot find the Novell Connection Manager for LDAP in download
I am trying to connect through a Java client to the Apache Directory Studio, LDAP server....I have downloaded the classes from the download page...see link below...but I can't see the NovellConnectionManager Class anywhere in this download when I use the open freely application to view the jar details.
LDAP Classes for Java
Environment: Windows 7

Hi MentalSuplex, and a warm welcome to the forums!
Don't know about Airport cards for it, but other options...
http://eshop.macsales.com/item/Sonnet%20Technology/N80211PCI/
Maybe this one, ask them...
http://eshop.macsales.com/item/Newer%20Technology/MXP802NPCI/
I use these...
http://eshop.macsales.com/item/Newer%20Technology/MXP2802NU2C/
http://eshop.macsales.com/item/Edimax/EW7711UMN/

IPhone 5 photo import error "the system cannot find the path specified"

Help, I cannot import photos from my iPhone 5 in windows 7, I keep getting the error mesage "the system cannot find the path specified"

Hi SonK,
Welcome to Apple Support Communities.
You may find this article helpful for verifying the steps you're using to import photos from your iPhone:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Best,
Jeremy

Invoke-IpamGpoProvisioning : Failed to import GPO. The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

Hello Im trying to configure IPAM but im getting this error.
PS C:\Users\Administrator.IPADE.MX> Invoke-IpamGpoProvisioning –Domain actdir.ipade.mx –GpoPrefixName IPAM –IpamServerFq
dn minte.actdir.ipade.mx –DelegatedGpoUser Administrator -DomainController discovery.actdir.ipade.mx
Invoke-IpamGpoProvisioning : Failed to import GPO. The system cannot find the file specified. (Exception from HRESULT:
0x80070002)
At line:1 char:1
+ Invoke-IpamGpoProvisioning –Domain actdir.ipade.mx –GpoPrefixName IPAM –IpamServ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (:) [Invoke-IpamGpoProvisioning], Exception
    + FullyQualifiedErrorId : InvalidOperation,Invoke-IpamGpoProvisioning
In the event viewer I founf this but I don't know what to do.
Import of backup failed. Error [The system cannot find the file specified.
Details -
     Backup
         Directory: The system cannot find the file specified.
         Instance : C:\Users\Administrator.IPADE.MX\AppData\Local\Temp\1\ipamprov
         Comment : {09673450-4573-42E8-85D0-104144DF0BA3}
         Source GPO:
             DisplayName: IPAMGPO_DNS
             ID: IPAMGPO_DNS
             Domain: {7F345996-1D92-4194-85BF-72BFB5298EDA}
     Destination GPO:
             DisplayName: ipamtestsetup.com
             ID: IPAM_DNS
             Domain: {447E8380-91AF-4C2D-8DAA-2C090A6400E8}

Hi,
Before going further, what was name specified in the IPAM provisioning wizard while selecting Group Policy based provisioning method? The GPO prefix name specified in the
PowerShell command must be same as the one specified in the IPAM provisioning wizard while selecting Group Policy based provisioning method.
Regarding Invoke-IpamGpoProvisioning, the following article can be referred to as reference.
Invoke-IpamGpoProvisioning
http://technet.microsoft.com/en-us/library/jj553805.aspx
Best regards,
Frank Shen

TS2776 i recently transferred my itunes file to a new pc. i am unable to play some songs i had imported to itunes and it says it cannot find the original folder. how can i play these files?

i recently had to rstore my pc. i had copied my itunes file to a flash drive and have since reinstalled it. Now, i am unablt to play certain imported files and have and exclamation mark. it says itunes cannot find the original folder. how can i play these songs if there is no other folder to find them in?

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

With OS X Yosemite 10.10.1, cannot record video with the iMac's built-in FaceTime HD camera. Cannot find the "Import" button in the toolbar.

Just updated to OS X Yosemite 10.10.1 and cannot find the "Import" button in the toolbar to record video on my iMac's Face Time HD built-in camera. Trying to follow the steps found under "iMovie (2013): Record video with the FaceTime HD camera" on apple support posting but it seems to me that those were posted for another OS version.
Any help would be appreciated!

Hello Triunfo,
Thanks for using Apple Support Communities.
If you are using the current version of iMovie, 10.0.6, you can follow the directions in the help article linked to below to import using the built-in FaceTime HD camera.
Record video with the built-in FaceTime HD camera - iMovie Help
Take care,
Alex H.

Itunes says it cannont import since it cannot find the right folders?!?

itunes says it cannont import since it cannot find the right folders?!?
i plugged in my ipod, and that's what it says!! i cant import anything into the ipod
does anyone know how to fix this??

I am having the exact same problems as you are. Same messages. Mine will actually sync some of my music then the message comes on. I'll plug my ipod back in and it will load a few more. Eventually it all freezes up and deletes everything on my pod.

Release Management error "The system cannot find the file specified"

We are getting the above error when deploying to a set of 4 servers (all belong to a tag). The deployment succeeds for 3/4 servers. For the server that fails, there is no tool or command output log to look at. We are able to log on to the
server in question and run the command manually (i.e. .\msiexec <filename.msi>) and that succeeds.
What can we do to troubleshoot this further?

Thanks, John. We are using Update 4. I enabled the details logging on the deployment agent and saw the following. The POSValidationSvc_Installer.msi file is available in the 201501200901505104929-7 folder:
Deployment: **********Installation will be done from this folder: "C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7"
1/20/2015 9:01:51 AM - Information - (12004, 11168) - Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployerImplementation:
Deployment: **********Installing component using command "powershell -File ./msiexec.ps1 -MsiFileName "POSValidationSvc_Installer.msi" -MsiCustomArgs "" /i /qn /l*v"
1/20/2015 9:01:53 AM - Information - (12004, 11168) - Deployment: Invoke Get-ExecutionPolicy
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FileExists C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7\powershell
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: Starting process -File ./msiexec.ps1 -MsiFileName "POSValidationSvc_Installer.msi" -MsiCustomArgs "" /i /qn /l*v, powershell, C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: Detaching process event handlers
1/20/2015 9:01:54 AM - Error - (12004, 11168) - The system cannot find the file specified: \r\n\r\n   at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.ExecuteProcess(ProcessStartInfo startInfo, String argumentsWithStarsForPassword, Int32 timeoutInMilliseconds)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployerImplementation(String application, String arguments, String argumentsWithStarsForPassword, Func`3 accountForPowerShellBug, Func`2
verifySecurityRestriction, Func`2 fileExists, Func`4 executeProcess, Action writeProcessOutputLog, Action readCustomLog, Action readAutoLog)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployer(String application, String arguments, String argumentsWithStarsForPassword)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.DeployComponent()

Unable to delete User object in FIM Portal - Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition"

Hi,
***Problem
I encounter a problem with FIM (version 4.1.3441.0 and 4.1.3496.0) when I try to delete a User object (and only a User object) whatever if it is
manually/Expiration Workflow/Powershell.
Deleting a User object used to be perfectly functional and, without any product version modification, stopped working. I haven't neither deleted/modified or add a
"Grant" MPR or any of the corresponding Sets since last time I saw it working.
Displayed error is "Request could not be dispatched" in FIM Portal and is referencing a stored procedure in Event Viewer.
***Error details
When I try to delete a User object, here is the output :
Portal
"Processing error" on submit
with the following details
Request status is stuck at "Validating" until next restart of FIM Service (after what it becomes “Canceled”)
Request’s “Applied Policy” tab does not contain any MPR where, at least, a “Grant” MPR is expected
As SQL Timeout is relatively high and error happens quickly, I don’t think there is a Timeout problem under that.
Logs
« Application »
The Portal cannot connect to the middle tier using the web service interface. This failure prevents all portal scenarios from functioning correctly.
The cause may be due to a missing or invalid server url, a downed server, or an invalid server firewall configuration.
Ensure the portal configuration is present and points to the resource management service.
« Forefront Identity Manager »
Reraised Error 50000, Level 16, State 1, Procedure ReRaiseException, Line 37, Message: Reraised Error 1088, Level 16, State 12, Procedure CalculateRequestSetTransitionsAssembleStatements,
Line 332, Message: Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition" because it does not exist or you do not have permissions.
Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 0.
Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.Data.SqlClient.SqlException: Reraised Error 50000, Level 16, State
1, Procedure ReRaiseException, Line 37, Message: Reraised Error 1088, Level 16, State 12, Procedure CalculateRequestSetTransitionsAssembleStatements, Line 332, Message: Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition"
because it does not exist or you do not have permissions.
Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 0.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult
result)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ResourceManagement.Data.DataAccess.UpdateRequest(RequestType request, IEnumerable`1 updates)
   --- End of inner exception stack trace ---
Requestor: urn:uuid:7fb2b853-24f0-4498-9534-4e10589723c4
Correlation Identifier: e7209633-46d0-4f4b-a59e-807649ef71ea
Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.InvalidCastException: Specified cast is not valid.
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType
operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier, UniqueIdentifier requestContextIdentifier,
Boolean maintenanceMode)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType
operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier)
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Delete(Message request)
   --- End of inner exception stack trace ---
For information, a maintenance plan rebuild/reorganize indexes daily and this problem has occurred on servers with different performances.
Is any of you has already encounter this problem ?
Any help would be greatly appreciated,
Thanks in advance for your help,
Matthew

While there are several SQL Agent jobs (FIM Temporal Events, Maintain Sets, and Maintain Groups among others)created by the FIM install only one of those is enabled and scheduled and it calls all of the same stored procedures that the other
jobs do. Step 2 is Maintain sets and Step 3 is maintain groups. So the Maintain sets and groups jobs never need to get enabled and scheduled, but if you want them to be maintained more frequently then you can.
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Cannot find the maps stored in import manager during port creation

Similar Messages

Maybe you are looking for